CamLS

iTrader: (3)

Our track has roughly the same length straight and I'm running a 35t pinion and 69t spur (48p, 3.94fdr) with minimal timing and 130deg motor temps after 5 min heats. A 36t pinion is as large as I can go with the 69t spur, any larger and I'd have to get the V3 motor mount.

Try around a 4-4.10 fdr to start and go from there depending on your timing and motor temps.

Hope that helps.

DRRC

iTrader: (59)

What servo is best for the new s411 ?
savox 1257 doesnt fit well
Where can I find a setup for asphalt blinky?
Thanks

dan_vector

iTrader: (27)

Sanwa/Airtronics SRG-BLS is awesome (which is what I use) or as a cheaper option the SDX-701 or -801.

CamLS

iTrader: (3)

The compact Savox 1251/2 are generally the most popular around here, and also are the most cost effective. With the 1251 in, I've got tons of room for different sized RX/ESC's.

Voltron989

iTrader: (5)

Futaba S9551.
At tower for $77 with discount code.

I use the Futaba BLS551 which is the brushless version.
$105 if your a tower member.

dan_vector

iTrader: (27)

Http://www.petitrc.com is a good place to find S411 setups. To be honest I've found the kit setup perfectly fine for blinky. Tyres make a bigger difference here!

DRRC

iTrader: (59)

Thanks guys
Getting my s411 ready for blinky
Tons of info here in rctech
Thanks

DomenL

ERYX V3.0 on the way http://serpent.com/news/13745/Scoop:...n-its-way.html

Niky_Freaky

2mm coated and laser engraved 7075 T6 aluminium chassis....
thats what suprises me

PurcyP

seems to be the trend now, metal chassis

awesomatix, xray as well also have metal chassis's

dan_vector

iTrader: (27)

I particularly like all hard plastics as standard!! I got tired of building a kit only to change all the plastics straight away. I got a box full of new medium plastics! DJC's as standard too!! Brilliant - well done Serpent!

Who's getting one? As soon as preorder is up I'll be all over it!

Johnny Wishbone

iTrader: (6)

Darn, I was off by a week, lol.

It has some interesting new options with the top deck, the lower bearing mounts and the sway bar mounts................need to see a picture just to wet the appetite.

AND have to get on the pre-order list.

scooby61

iTrader: (1)

Man everytime I build up something the next iteration gets announced within weeks!! Just built my 2.0 can't afford this unless I sell both of my mod cars.

b-man777

Hey all: This may not be new news ,but saw this over on redrc and thought I'd share. I've seen a few 1/10th electric tc's with aluminum chassis lately is this a trend or a fad? Also what would be the benefits of aluminum vs graphite chassis? Thanks

http://www.redrc.net/2014/04/serpent...-0/#more-80170

gearhead_22

iTrader: (10)

what was wrong with the 2.0 hard chassis