Serpent S411
#302
sometimes the Clip at the bottom sits out too far and rubs on the shaft. make sure its not scratching on the shaft, and causing your issues. if not, take the seals out and have a look nothing is caught up in there. maybe on one shock only, as mine i have replaced the seals, and all is good.
Last edited by P.I.M.P; 06-16-2011 at 11:02 PM.
#303
Tech Initiate
Just found out Stormer have them in but can't find any part, where else can I find extra arms, uprights, knuckles, and extra gear diff in US? Dont wanna order from HK, takes too long
#304
Tech Champion
iTrader: (44)
Go to:
www.kamikazetoysandhobbies.com
Get their number and give them a call. They still have some parts left over from the S400 that will work. As for the gear diff, you'll need to wait for that to come out as an upgrade as posted earlier.
#305
Tech Initiate
Those parts are carry over from the S400.
Go to:
www.kamikazetoysandhobbies.com
Get their number and give them a call. They still have some parts left over from the S400 that will work. As for the gear diff, you'll need to wait for that to come out as an upgrade as posted earlier.
Go to:
www.kamikazetoysandhobbies.com
Get their number and give them a call. They still have some parts left over from the S400 that will work. As for the gear diff, you'll need to wait for that to come out as an upgrade as posted earlier.
#306
S411 parts
Those parts are carry over from the S400.
Go to:
www.kamikazetoysandhobbies.com
Get their number and give them a call. They still have some parts left over from the S400 that will work. As for the gear diff, you'll need to wait for that to come out as an upgrade as posted earlier.
Go to:
www.kamikazetoysandhobbies.com
Get their number and give them a call. They still have some parts left over from the S400 that will work. As for the gear diff, you'll need to wait for that to come out as an upgrade as posted earlier.
Ren
Last edited by venom54; 06-17-2011 at 01:38 AM.
#307
#308
Serpent will release New spur gear !
more stronger than XRAY !
48P 84T final testing now
more stronger than XRAY !
48P 84T final testing now
#309
Tech Apprentice
hi all Serpent lovers
i have a little problem with my new S411 and the problem is the spurgear,,
i can't find the right one to fit!!!
i have tried with the smallest one i have and that is the 87 T 48 pitch and its too big,
i have make a order on 64 P spurgear now with 103-104 and 114 T..
my question is how many people have had problems with their spurgear???
//Hasse
Sweden
i have a little problem with my new S411 and the problem is the spurgear,,
i can't find the right one to fit!!!
i have tried with the smallest one i have and that is the 87 T 48 pitch and its too big,
i have make a order on 64 P spurgear now with 103-104 and 114 T..
my question is how many people have had problems with their spurgear???
//Hasse
Sweden
#310
Tech Apprentice
Of course you will understand although I think it's less Spur Gear than 87 T, so my question was perhaps a bit unclear, the question is whether there are more people who have had problems with Spur Gear, and what sizes are the people have had problems with when it comes of 64P or 48P?
///Hasse
///Hasse
#311
Tech Master
iTrader: (9)
Join Date: Mar 2003
Location: ไกล, 遠, jauh, 먼, ver, 遠い, lontano, بعيدا, xa
Posts: 1,224
Trader Rating: 9 (91%+)
hi all Serpent lovers
i have a little problem with my new S411 and the problem is the spurgear,,
i can't find the right one to fit!!!
i have tried with the smallest one i have and that is the 87 T 48 pitch and its too big,
i have make a order on 64 P spurgear now with 103-104 and 114 T..
my question is how many people have had problems with their spurgear???
//Hasse
Sweden
i have a little problem with my new S411 and the problem is the spurgear,,
i can't find the right one to fit!!!
i have tried with the smallest one i have and that is the 87 T 48 pitch and its too big,
i have make a order on 64 P spurgear now with 103-104 and 114 T..
my question is how many people have had problems with their spurgear???
//Hasse
Sweden
#312
Tech Elite
iTrader: (101)
I have a 106T, 64 pitch gear on mine, and it fits fine. If I were to guess I would say up to maybe 112T would probably fit but I would not go any higher than that. Make sure the hole patterns for the 3 screws is correct.
Steve
Steve
hi all Serpent lovers
i have a little problem with my new S411 and the problem is the spurgear,,
i can't find the right one to fit!!!
i have tried with the smallest one i have and that is the 87 T 48 pitch and its too big,
i have make a order on 64 P spurgear now with 103-104 and 114 T..
my question is how many people have had problems with their spurgear???
//Hasse
Sweden
i have a little problem with my new S411 and the problem is the spurgear,,
i can't find the right one to fit!!!
i have tried with the smallest one i have and that is the 87 T 48 pitch and its too big,
i have make a order on 64 P spurgear now with 103-104 and 114 T..
my question is how many people have had problems with their spurgear???
//Hasse
Sweden
#313
Tech Elite
iTrader: (101)
So, I received my overseas order in 3 days, which was better than I expected. After I finally relaxed a bit after work, I started to build the snake, and it was better than even I hoped it would be. I am really pleased with the car. Everything was packed in easy to understand bags and so far everything fits really well. I should be able to finish the rest tonight after work.
I think this car will have a large amount of space for the electronics too.
Nice job Serpent, welcome back to Electric TC racing
Steve
I think this car will have a large amount of space for the electronics too.
Nice job Serpent, welcome back to Electric TC racing
Steve
#314
Tech Apprentice
Thank you very much for the tips on the spur gear, and as Steve says, it's a nice car to build, everything fit well and good and smart solutions to everything, I think, will premiere run my car this weekend at the local track and I really looking in to it. and Steve there is good room for the electronics in the car, I promise
//Hasse
//Hasse
#315
Tech Elite
iTrader: (101)
Thank you very much for the tips on the spur gear, and as Steve says, it's a nice car to build, everything fit well and good and smart solutions to everything, I think, will premiere run my car this weekend at the local track and I really looking in to it. and Steve there is good room for the electronics in the car, I promise
//Hasse
//Hasse
Steve