Serpent S411
#1876
Tech Master
iTrader: (2)
question about gears and shocks
guys I am ordering one of these cars and I am curious about two things:
1) what pitch are the gears included in the kit?
2) In a S710 (nitro) you were able to pull the shaft of the shock down until it locked onto something internal and then twist. This would rotate the piston inside and open or close additional holes. So you went form 2-3-4 holes with a simple twist. Is serpent still doing this? if not, why did they stop?
Thanks,
1) what pitch are the gears included in the kit?
2) In a S710 (nitro) you were able to pull the shaft of the shock down until it locked onto something internal and then twist. This would rotate the piston inside and open or close additional holes. So you went form 2-3-4 holes with a simple twist. Is serpent still doing this? if not, why did they stop?
Thanks,
#1877
Tech Master
iTrader: (14)
guys I am ordering one of these cars and I am curious about two things:
1) what pitch are the gears included in the kit?
2) In a S710 (nitro) you were able to pull the shaft of the shock down until it locked onto something internal and then twist. This would rotate the piston inside and open or close additional holes. So you went form 2-3-4 holes with a simple twist. Is serpent still doing this? if not, why did they stop?
Thanks,
1) what pitch are the gears included in the kit?
2) In a S710 (nitro) you were able to pull the shaft of the shock down until it locked onto something internal and then twist. This would rotate the piston inside and open or close additional holes. So you went form 2-3-4 holes with a simple twist. Is serpent still doing this? if not, why did they stop?
Thanks,
1) The car comes with a 48 pitch spur gear. I believe it is a 84 tooth. I switched mine out for a 64 pitch since I had more pinions for 64 pitch.
2) No - the shocks do not have that option any longer. I believe the Xray still has that option with it's shocks but most people do not use it. The shocks on the S411 are actually very easy to work on - switching pistons takes very little time and the action on the shocks are pretty smooth.
#1879
Tech Adept
#1880
#1881
Tech Master
iTrader: (2)
Hi where did you get the quote from?
what is RCC ? thank you.
BTW any tips to things to look out for when building?
I noticed that serpent leaves the top of the ball-cup links open to expose the ball below. I see several people making this modification to their cars (non serpent) by dremeling. What is the advantage of this?
what is RCC ? thank you.
BTW any tips to things to look out for when building?
I noticed that serpent leaves the top of the ball-cup links open to expose the ball below. I see several people making this modification to their cars (non serpent) by dremeling. What is the advantage of this?
#1882
Tech Adept
RCC X is serpent's new shock
http://serpent.com/product/903334/
I got the quote from S720's thread
http://www.rctech.net/forum/nitro-ro...720-a-140.html
http://serpent.com/product/903334/
I got the quote from S720's thread
http://www.rctech.net/forum/nitro-ro...720-a-140.html
#1883
Tech Adept
#1884
this is STD Shock !
#1886
Tech Adept
the LE kit number 001 should be auctioned today
but why can't I find it on ebay?
the auction postponed?
but why can't I find it on ebay?
the auction postponed?
#1887
Tech Champion
iTrader: (15)
Trimming the ballcup allows you to get the 2mm wrench in there without pulling the ball cup off. Since it is press fit plastic, the more you remove a ball cup, the more play you get. I t
So you can make changes without removing it.... It can also help with clearance in some instances.
So you can make changes without removing it.... It can also help with clearance in some instances.
Hi where did you get the quote from?
what is RCC ? thank you.
BTW any tips to things to look out for when building?
I noticed that serpent leaves the top of the ball-cup links open to expose the ball below. I see several people making this modification to their cars (non serpent) by dremeling. What is the advantage of this?
what is RCC ? thank you.
BTW any tips to things to look out for when building?
I noticed that serpent leaves the top of the ball-cup links open to expose the ball below. I see several people making this modification to their cars (non serpent) by dremeling. What is the advantage of this?
#1888
Tech Elite
iTrader: (9)
Rebuilding my shocks and I damage 1 of the shocks spring washer/snap ring, will this work because the instruction parts lists parts as 903332 but I cant find it anywhere one the net.
http://www.amainhobbies.com/product_...-Seger-Clip-10
I read the entire instruction and this is the only time when the spring washer/snap ring is used and Amain has a different part# but list as being used the s411. Can someone confirm this is the right snap for the shocks, thanks in advance.
http://www.amainhobbies.com/product_...-Seger-Clip-10
I read the entire instruction and this is the only time when the spring washer/snap ring is used and Amain has a different part# but list as being used the s411. Can someone confirm this is the right snap for the shocks, thanks in advance.
#1890
Tech Adept
903332 is shocks revision kit
I don't know what you broke, e-clip? or circlip?
I believe you can get what you are looking for in here
http://www.amainhobbies.com/product_...k-Revision-Set
I don't know what you broke, e-clip? or circlip?
I believe you can get what you are looking for in here
http://www.amainhobbies.com/product_...k-Revision-Set