Novak havoc issues
#1
Novak havoc issues
New to the forum, lots of great info here.After being away from the hobby for a long time, I got back in. The guy at LHS talked me into the Havoc 3S instead of Valenion sytem.Installed in a older RC-R10 and got every bit of 30 seconds of run time. Died in the street, No LEDs. Forgive my ignorance, but is it graveyard dead or is there a reset?
#2
Company Representative
New to the forum, lots of great info here.After being away from the hobby for a long time, I got back in. The guy at LHS talked me into the Havoc 3S instead of Valenion sytem.Installed in a older RC-R10 and got every bit of 30 seconds of run time. Died in the street, No LEDs. Forgive my ignorance, but is it graveyard dead or is there a reset?
Novak Instruction Downloads
Please make your initial email as detailed as possible. Include:
~ speed control (brand/model)
~ motor (brand/wind)
~ number/type of cells
~ battery, brand (c rating/capacity
~ rotor (old/new)
~ connectors used
~ servo (brand/model)
~ radio system (receiver/transmitter)
~ vehicle & gearing
~ warranty claim?
~ lipo cut-off, on/off
~ any external modules (BEC/brand, Glitch Buster)
~ other important info: water damage, corrosive chemical sprays, excess heat, etc
~ speed control (brand/model)
~ motor (brand/wind)
~ number/type of cells
~ battery, brand (c rating/capacity
~ rotor (old/new)
~ connectors used
~ servo (brand/model)
~ radio system (receiver/transmitter)
~ vehicle & gearing
~ warranty claim?
~ lipo cut-off, on/off
~ any external modules (BEC/brand, Glitch Buster)
~ other important info: water damage, corrosive chemical sprays, excess heat, etc
Video: How to Clean Your BL Motor
Trouble-shooting TeamNovak's One Touch™ Speed Controls