syndr0me

iTrader: (32)

Aren't you guys glad you bought that bridge, yet not a single update has come out? I put that right up there with the case snapping off and the solder tabs as my favorite features. At least the price is right.

Dane

iTrader: (26)

Upgrade-Kit SXX -> SXX Mod+Stock
http://www.lrp.cc/en/news/news/news/...fa58908ce3dee8

Andy Koback

iTrader: (280)

Yep!!!

Buckaroo

iTrader: (3)

Oh crap, let the conspiracy theories begin about 'one off' team programs and what not.

I wonder how ESD sensitive this thing is?

Hopefully this will be a running change to the manufacturing line so you won't have to get an ESC, wait until it goes POP, then have to put a board in it to fix it yourself because LRP/AE service in the US moves at speeds normally reserved for measuring the movement of geological features.

Marek Gadomski

When it will be available to buy ?

mhavlena

Guys:

My LRP SXX Stock Spec V2 was shutting down all day today (2nd race weekend with this ESC). Error code showed "motor thermal shutdown", yet the motor wasn't more than 120 deg F. I put in another brand of ESC for the rest of the day and problems were gone.

Do I need to send the ESC in for repair?
Is the new board the fix to this issue?

Thanks.

defcone

iTrader: (15)

You already fixed it.

mhavlena

The new software v2.0.4 for Windows and Mac is now available. All SXX speed controls and upcoming types can be pushed to a new level with the firmware update. Get prepared for future races!

With the new software v2.0.4 for Windows and Mac, you get the decisive tool to take advantage of the latest firmware versions. The new tool isn't only suited for the nationally and internationally successful SXX line (Competition Version 2, TC-Spec Version 2, Stock-Spec Version 2), but also for the all-new iX8 brushless speed control and the upcoming Spin Brushless speed controls. More functions and an improved performance - download the software update today!

Please note: for a quick and easy update of the speed control software (firmware), the optional USB Bridge is required. (#LRP81800).

Mac-Version v2.0.4 - SXX Competition V2 / SXX StockSpec V2 / SXX TC-spec V2 02.08.2011 [SXX-Software_Mac.zip] (609 KB, ZIP)

Windows-Version v2.0.4 - SXX Competition V2 / SXX StockSpec V2 / SXX TC-spec V2 02.08.2011 [SXX-Software_Win.zip] (792 KB, ZIP)

icefish

Oh god, maybe I'm misunderstandings on it and tot it can be upgrade by the bridge, anyway the trade offer still available? How about user from Malaysia? Where to trade or need send it back to German ?

mhavlena

Still looking to see whether anyone has experienced this issue with their SXX stock spec V2?
If so, what was the fix?
Thanks!!

bonda

Perhaps there is nothing wrong with your speedo but it's your motor.
As far as I know the motortemperature is measured with a PTC resistor on the sensorboard. So if there is something wrong with it the speedo will read wrong temperatures.

Does your other speedo measure the motortemperature? If yes and it's readings were near the actual value then there can't be any problem with your motor. Did you try the SXX & motor combo afterwards once again?

I didn't hear any problems about wrong temperature readings with the SXX SS V2. Perhaps you should contact the LRP service or post on the LRP forum and describe your problem.

johnny lee

iTrader: (19)

hey guys i'm looking for some esc setup help for 17.5 boosted 1/12 scale.

if anyone has experience running 1/12 scale in 17.5 boosted please share any tips or basic esc and rollout setups that you may use. greatly appreciated.

RedBullFiXX

iTrader: (34)

This worked well with a MurfDogg 17.5
90X45 Carpet track

0-10-12-0
0 deg motor timing
66.5 roll

johnny lee

iTrader: (19)

thanks mate

I'll give it a try and report back

mhavlena

I'm currently using S/W v4.4 in my SXX stock spec V2. Can someone tell me whether this new S/W v2.0.4 is an update to v4.4?
or am I mixing up S/W with Firmware? Am I using the latest with v4.4?