LRP SXX StockSpec V2 ESC
#616
I have a new Nosram SSX2 TC-Spec and I´m using SP motors. My 4.5t wouldn´t even spin and my 4.0 would spin but sometimes it cogs and stalls. When I start to spin it by hand it comes alive. What´s happening? Had no problem whatsoever with my HW 120A speedo....
#617
Anyone?
#618
Guideline to setting SXX VII esc...
Need some guideline from u guys. I've matching my SXX Version II ESC with 10.5 Dualsky Z5 motors. Normally i running at medium track about 150ft straight road. I tried several FDR & setting on the esc. Feels like the speed is very slow and most of other can overtake me very easy. Could anyone guide me what is the proper FDR & setting to make my car faster ??? Thanks in advance.
#619
best 13.5 motor to run with lrp sxx v2
Hello
Best motor?
Cheers
Best motor?
Cheers
#620
Not sure if you have read the title to this thread correctly, however it is to do with the SXX V2 StockSpec ESC, not the mod versions. This ESC uses different SW to the TC Spec SXX V2.
Regards,
Calvin.
Regards,
Calvin.
#621
Tech Fanatic
iTrader: (6)
But on the bench the motor should spin regardless of what settings you have.
Through a process of elimination, you should be able to determine whether it's the motor, battery, sensor wire, power wiring or if the ESC is simply not working with anything you hook up to it.
#623
#624
Tech Elite
iTrader: (2)
Got this speedo back from a warranty exchange and it's been sitting in a box since. Would like to use it in my 12th scale. Anyone have a starting setup for a 17.5 boosted 12th scale class using an Orca Motor? Rollout? Just a good starting point would be great.
Thank you for your time,
Ivan
Thank you for your time,
Ivan
#625
Thanks
#626
I have had a weird occurrence with my sxx v2 speedo: after a 6 min. run in my tc the speedo would still power the motor as if I had the throttle applied at about 1/8 throttle= even when I was not touching the throttle at all, and it was in neutral. I recalibrated the speedo, and it has done this a couple of more times, but then stopped
Has anyone else had similar occurrences? If so any help would be appreciated. Happy Racin
Has anyone else had similar occurrences? If so any help would be appreciated. Happy Racin
#627
Can someone please advise what the latest firmware upgrade does? I am trying to lower my speedo temp in 1/12 mod.
#629
Tech Regular
Esc V2 in blinky mode
Plan to run this in my WGT at the IIC with a 13.5 in blinky mode X12 Motor with standard as it comes rotor.
Need a starting point on motor 2 dot,3 dot 4 dot. Plus rollout.
Need a starting point on motor 2 dot,3 dot 4 dot. Plus rollout.
#630
Tech Adept
My problem too
From reading your post, I am getting the impression that this speedo only really works with the x12 motor - AKA A CLOSED LOOP
LRP have a lowsy habit of giving with one hand and taking away with another
I wish someone from LRP will have the decency in giving a decent response other than read the manual and change the motor - that's wat I usually get if I actually e-mail LRP.
thanks