Jeff Brown

Practice, Practice, Practice.

jordys jrxs

hi jeff, which springs are better than the corally ones, would you say the associated ones are or the hpi ones are or the tamiya ones.

jordan

OllieRDX

The Asso springs are for asphalt (Blue, Silver and Green) and the Tamiya Springs are more for Carpet (Blue) but sometimes i drive Tamiya White and Yellow for asphalt not much but sometimes with a Spool!
Greetings Ollie

OllieRDX

Kearup, Simo, Fischer and sakke drove the Asso Springs and Tossolini Drove the Tamiya Springs!

Greetings Ollie

jordys jrxs

do i hav to make any mods to put the associated springs on as i run asphalt in the UK

jordan

rcgen

Watch the corally boards HUH? What is this Big Brother of J'ville

ahsikes

iTrader: (17)

It's called. Having to work in a drug information call center 40 hours a week (for free) in order to earn enough hours to graduate.

Amazingly enough people in florida seem to know all about drugs, cause they definetly do not call in.

Drcy

Hi,

What mods are needed to use the Asso Springs?
I imagine that they are too long to be used without mods.

Do the asso shock collars fit the RDX Shocks??

thanks in advance

Pedro

or8ital

iTrader: (38)

Broke my fan for the RDX today. Any heavy duty replacements?

Also how do people do the dual fans where want is in the fan holder and then one off that over the can?

josh short

iTrader: (50)

or8ital

check out http://www.coolcanfan.com/

andrewdoherty

iTrader: (49)

My wife has the cam or I'd post a pic. I am using a Team Tamale FK05 dual fan mount. I drilled one screw into the top deck and used another existing hole and mounted 2 crc standoffs (I used two so the tt mount wouldn't just rotate on the one mount. I them drilled an extra hole in the TT mount and secured it to the two standoffs. I am pretty particular about how things work and look on my car and this setup looks and works great, Brushed or Brushless. The fans are half positioned over the Sphere Comp next to the motor and half over the motor itself. Just FYI, here in Dallas today the heat index was 103. We run indoors and I was temping my surroundings at around 88 degrees (table, floor, chair etc.) I ran in a 19t class with the sphere and a 4300 geared at 112/34 powered by an Orion Li Po. I temped my esc and my motor after every run and the esc was a consistant 110 degrees and the motor reached only 117 degrees. This was my first day running the the Sphere and the 4300 in a race so I was wanting to make sure I didn't screw something up. I just have the dual associated fan kit plugged into my rec. Let me know if I can clarify anything. Remind me in a day or so and I will have teh camera back to take a pic. It looks rather neat and tidy if I doo say so myself!

or8ital

iTrader: (38)

Do you have this? Can you run both those fans and the one on the side? Also does it sit high enough? It looks like it is slightly above the upper deck but my checkpoint seems higher then that.

OllieRDX

You need the Tamiya Perches and the tamiya connecting balls

Greetings Ollie

OllieRDX

You need to put the Tamiya Perches and tamiya ballconnector to use the asso springs or tamiya springs!
Greetings Ollie

josh short

iTrader: (50)

yes i have this and it sits high enough my money motor fits fine under it i use both fans right where there are i plus them into the reciever