Community
Wiki Posts
Search

touring cars

Thread Tools
 
Search this Thread
 
Old 11-26-2010, 09:26 AM
  #1  
Tech Apprentice
Thread Starter
iTrader: (8)
 
Join Date: Nov 2010
Location: St. Paul, MN
Posts: 79
Trader Rating: 8 (100%+)
Default touring cars

I am new to on road vehicles, I have a bunch of off road trucks. The question I have is what is the advantage of having a belt driven touring car than shaft. Can anyone please give me some insight on this. Thanks
787Dreamliner is offline  
Old 11-26-2010, 09:58 AM
  #2  
Tech Master
iTrader: (1)
 
locked's Avatar
 
Join Date: Mar 2010
Location: Toronto
Posts: 1,758
Trader Rating: 1 (100%+)
Default

Belt drive eliminates torque steer. Also because the belts stretch a little, there is a small delay before all the power is applied to the tires, so it can act as a sort of mild traction control.
locked is offline  
Old 11-26-2010, 09:58 AM
  #3  
Tech Fanatic
 
academygaz's Avatar
 
Join Date: Apr 2005
Location: UK
Posts: 754
Default

Belt Drive
+ no torque steer
+ motor direction aids traction (it rotates rearwards)
- belts don't like grit/stones (so don't race on unprepped surfaces)
- belts need centre pullies, layshaft etc, so more rotating parts

Shaft drive
+ Drivetrain is lower
+ More efficient
- torque steer with anything quicker than a 13.5
- noisier (you can hear a shafty on track )
- no 'race-spec' shaft drive TC in the past 5 years has been on sale, so very lacking in development

To most people, its no contest, belt is better for most drivers. In the old days of Spec racing (27t and 19t), we were using NiCD and NiMH cells, so efficiency was important. But nowadays the cars have a lot more power than grip so its all about handling.
academygaz is offline  
Old 11-26-2010, 10:23 AM
  #4  
Tech Elite
 
Foxxrocket's Avatar
 
Join Date: Jul 2008
Location: Sonoma County
Posts: 2,018
Default

Because of the directness of shaft drive, they are a faster accelerating out of the corners. This makes them good on short technical tracks, but because of torque steer will hurt them on long stright aways.
Foxxrocket is offline  
Old 11-26-2010, 12:49 PM
  #5  
Tech Apprentice
iTrader: (1)
 
Join Date: Dec 2006
Posts: 65
Trader Rating: 1 (100%+)
Default

Originally Posted by academygaz
Belt Drive
+ no torque steer
+ motor direction aids traction (it rotates rearwards)
- belts don't like grit/stones (so don't race on unprepped surfaces)
- belts need centre pullies, layshaft etc, so more rotating parts

Shaft drive
+ Drivetrain is lower
+ More efficient
- torque steer with anything quicker than a 13.5
- noisier (you can hear a shafty on track )
- no 'race-spec' shaft drive TC in the past 5 years has been on sale, so very lacking in development

To most people, its no contest, belt is better for most drivers. In the old days of Spec racing (27t and 19t), we were using NiCD and NiMH cells, so efficiency was important. But nowadays the cars have a lot more power than grip so its all about handling.
I just read this, and I'm thinking I am really out of touch with what the current racing classes are!

Sorry to ask a newb question, but, is no one really doing spec racing any more? So, I think I see a lot of people taking about 17T, and I guess there are less turn motors too- the less turns, the faster, right? It's pretty much all brushless and lipo these days?

If you read my above question and are wondering if I'm being a jerk- I'm not! I honestly am trying to figure out what is the "in" class for electric.
JasonRP is offline  
Old 11-26-2010, 12:57 PM
  #6  
Tech Apprentice
Thread Starter
iTrader: (8)
 
Join Date: Nov 2010
Location: St. Paul, MN
Posts: 79
Trader Rating: 8 (100%+)
Default

Thank you all for your responses
787Dreamliner is offline  
Old 11-26-2010, 01:06 PM
  #7  
Tech Addict
iTrader: (27)
 
jake95's Avatar
 
Join Date: Jul 2010
Location: sydney
Posts: 703
Trader Rating: 27 (100%+)
Default

shaft driven isa little bit harder to get to things than a belt driven and the belt driven can be more capable of lower turn motors
jake95 is offline  
Old 11-26-2010, 03:13 PM
  #8  
Tech Champion
iTrader: (2)
 
DARKSIDE's Avatar
 
Join Date: Mar 2008
Location: Nashville-Memphis
Posts: 9,619
Trader Rating: 2 (100%+)
Default

it depends on what class you going to be running....if you are running slower TC class like VTA or RCGT, the shaft drive is fine, the TC3 is still getting the job done in most local and national races....

but if you are going to run anything faster, say 17.5 open esc or 13.5, a belt drive car is more of what you need......
DARKSIDE is offline  

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off



Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.