3Racing Sakura Zero S
#181
Second Zero S just arrived, don't have time to build till this weekend. Going to build this one with the FRP chassis. This one is going to be used for VTA.
#182
Tech Regular
13pages and no test report on how the car handles on the track? (compared to the more expensive topdogs) it has been out for a month now!
#184
Protoform LTC-R
#187
My body posts come out very close to the rear wing uprights on my protoform P37. I have another one sitting on the bench ready to be painted.
#189
Here are a couple of pics. I ran this body on my TC3, so thats why all the holes. The Front posts are in the TC3 holes, kinda bent to fit in. The lower front holes are a little to low on the body but show the width they should be.
#191
The pics are with the posts infront of the shock tower. If the shocks were behind then the posts would end up under the wing and it would be a pain to get the clips on.
Just learned I need to flip the belts to get the vertical motor mount on... more work than I thought hehe
Just learned I need to flip the belts to get the vertical motor mount on... more work than I thought hehe
#193
Which upper deck do I need?
#195
Tech Rookie
Is the stock spur on this vehicle considered 64 pitch?
What size pinion would fit onto this car without modifications or upgraded parts?
I am thinking of club racing with a 17.5 motor
What size pinion would fit onto this car without modifications or upgraded parts?
I am thinking of club racing with a 17.5 motor