Capt'N_Slow

iTrader: (10)

Rear shocks are much to long to fit on the front and maintain your ride height low enough.

Just turn the bottom shock holder out 2-3mm is all that is needed to make the stiffer dm-1 springs easier to install.

GRKSTL

iTrader: (9)

I was able to get DM-1 front and rear springs at my LHS today. The front springs fit, the GTP 2-E front shocks, just fine. You have to adjust the nut 2-3mm like you said. The DM-1 rear springs are too short to fit the shock bodies on the GTP 2-e. The adjustment nut will not adjust anymore and you have to much play in the spring.

Any other ideas?

Joat

I am running ultra front shocks in the rear too

Bubblehead

What are rule's for GTP2e? (are the classes boosted or non-boosted, length of race)

FangsCPO

I can't see needing to boost, those rigs are damn fast already as it is. Also, if you using a RX8 ESC, there is no boost option, only timing.

Jspeed

We usually inventory our harder 60 & 65 shores later in the summer USA season when temps in some placed are in the 95+ degree range.
Check your pm, ok Thank you.

Vector03cobra

iTrader: (11)

Thought i would throw up my Ofna GTE.

It should see a track in about 2 weeks.

ozzfest

iTrader: (5)

So if I was to pick up one of these kits, what esc/motor combo do you guys recommend? And servo?
Thanks in advance.

drpower

iTrader: (9)

Tekin RX8 2250Kv
Hitec HS-7945TH or KO Propo RSX
RC Monster Mod 1 pinion
Sweep EXP - I got the preglued on 6ix packs and they are amazing.


I have been running this with a Reedy #626 4S 5500Mah 65C, and I also have a Thunder Power G6 6S 3850Mah (Only for a Top Speed run) that I am waiting to try once I get the Eagle Tree V4 150A logger and install it.

I heard guys racing with a 1900Kv on 5S so look at that too. Haven't heard a lot from guys with the 2650Kv motor, but I've been out of the loop for some time.

vstrok

iTrader: (31)

What diff weights are you all running? How long does it take you to change per each diff?

Justpassedu

iTrader: (118)

i have a brand new 1 forsale if anyone want's it with a brand new ipanema warrior body - http://www.rctech.net/forum/r-c-item...n-out-box.html

vstrok

iTrader: (31)

My buddy may be interested. He has some sick Mini Z's. You into a trade? He has some hooked up ones.

Justpassedu

iTrader: (118)

No sorry not looking for mini z's but he or you can always pm me if you'd like to work something out.

ozzfest

iTrader: (5)

Thanks for the info! Really appreciate it.

FangsCPO

I have a DM-1 Spec Tekno converted
Tekin 2250kv RX8; geared 16/48 (center diff)
I'm using Futaba S9156, slightly overkill but better safe than sorry.