Originally Posted by Lazer Guy
I see your using a 2250kv motor in your gtp2e.
What lipo and pinion are you using ???
Also I've been looking for set up sheets with good starting set ups and haven't found anything.
If anybody knows of any please link me to them.
1 more.... Is a center diff something I should get ???
I am using a 35c 4s 5000mAh lipo
15t pinion with stock 51t spur gear
60wt shock oil all the way around
Ride Height Front 8mm
Ride Height Rear 9mm
Front Diff 30k
Rear Diff 10k
2.8mm Kyosho rear sway bar (tight fit but works great)
Red (Soft) DM1 Springs Front
White (Med) DM1 Springs Rear
Sweep 50s slicks all the way around
Have the SNR carbon graphite shock towers on order and will test what works best once I get it.
As far as the center diff some say get it, some say don’t. if you want it here is the link..
If you get it I would start with 100,000wt diff fluid
I set my exponential -60% so when I give it throttle it’s not hurting my front and rear diffs and it makes it more manageable on tight tracks.
Also for me I set my push control using the hotwire so that I can roll around corners using the speed and weight of the car to corner. I found that doing that helped with me loosing traction as I cornered because the 2250kv has so much torque.