Xray T3 2011
#2253
Tech Adept
Check the 2 pictures about the TCX steering system on my T2008.
Just like on the T3'11 mod, the servo linkage should be parallel with the steering posts line (at its end of travel left and right). Being a little angled at the neutral position doesn't really matter.
I also have the same L/R EPA value on the radio.
"Please Juraj, make the T3'12 this way out of the box !"
Just like on the T3'11 mod, the servo linkage should be parallel with the steering posts line (at its end of travel left and right). Being a little angled at the neutral position doesn't really matter.
I also have the same L/R EPA value on the radio.
"Please Juraj, make the T3'12 this way out of the box !"
#2254
Tech Champion
iTrader: (34)
I'd bet the farm on it, even Martin is running his servo like that. Means a new top deck would be a near certainty too.
I also have a theory that having the longer link which mounts on the far side of the steering rack instead of in the centre like 416 (and others) is actually better. I don't really have any way of proving this, but I now prefer the way my converted t3 steering feels compared to the tammy
Nice conversion btw. Did you know you can use over cleaner to get the anodizing off & then metal polish to bring the finish up?
I also have a theory that having the longer link which mounts on the far side of the steering rack instead of in the centre like 416 (and others) is actually better. I don't really have any way of proving this, but I now prefer the way my converted t3 steering feels compared to the tammy
Nice conversion btw. Did you know you can use over cleaner to get the anodizing off & then metal polish to bring the finish up?
#2255
Tech Adept
I already promise myself to get the next T3 evolution IF and only IF the servo is 90° turned out of the box. Sounds that Martin will help us this way !
#2256
Tech Adept
Shot taken during the Warm-Up of the next European Championship:
After Martin, even Teemu and Juraj's car shows a 90° turned servo.
Can't wait to see the T3'12 !
After Martin, even Teemu and Juraj's car shows a 90° turned servo.
Can't wait to see the T3'12 !
#2258
Tech Adept
#2260
Tech Adept
from today RedRC's news. The developed report added this link:
https://picasaweb.google.com/1089071...iskirchen2011#
https://picasaweb.google.com/1089071...iskirchen2011#
#2262
Well I tried inroad last weekend and loved it, I mainly run 1/8 Nitro Offroad, Kyosho, so I wanted good quality etc so I got the t3 mainly for the durability too. Car is good, sucks that I had to buy front and rear driveshafts for the gear diff in the back and the better fronts for no or less shatter. Great build but...
These shocks are JUNK, wow traxxas shocks build better, and x-rays way puts air in the shocks, tons of air in the shocks no matter what, so now I proly need that tamiya air remover tool, if I have to buy tamiya shocks I will sell this take my loss and buy a tc6. If you think these shocks arw good build some kyosho shocks you'll be in SHOCK, that's quality.
Some tips maybe? I have plenty experience building shocks 1/8 and 1/10 off road.
Thanks
Andy
These shocks are JUNK, wow traxxas shocks build better, and x-rays way puts air in the shocks, tons of air in the shocks no matter what, so now I proly need that tamiya air remover tool, if I have to buy tamiya shocks I will sell this take my loss and buy a tc6. If you think these shocks arw good build some kyosho shocks you'll be in SHOCK, that's quality.
Some tips maybe? I have plenty experience building shocks 1/8 and 1/10 off road.
Thanks
Andy
#2263
I saw the new gear diff from Xray yesterday all i can say is WOW
it is tiny , and weighs less then a ball diff
Come on Xray release it soon PLEASE
it is tiny , and weighs less then a ball diff
Come on Xray release it soon PLEASE
#2264
Tech Champion
iTrader: (15)
Hi All, New Exotek XR3'11 lipo chassis with the option to mount the servo left to right now in stock
http://www41.instantestore.net/merch...po-chassis.cfm
http://www41.instantestore.net/merch...po-chassis.cfm