Jeff Werner

iTrader: (30)

Easton has been running yokomo since this summer. First major race was the ROAR On Road nats in Portland with the Yok.

Looks like all the usuall namer are at the front...this will be a heck of a shootout.

Jeff

JDXray

iTrader: (3)

the new yokomo SDW on tq-racing.com looks pretty nice. Coming in December it says.

Hugo

iTrader: (1)

Which tyres are they running?

Cobra81li200

pre-glued CS27 handouts.

smn_says

All this info is nice and should be on some other thread. This is the worst coverage for a worlds.

Does anyone know of any other site that may have some kind of clue as to what is happening?

Arun

All this info is from Tamiya team manager Thailand---Kumpol Sriprapa.

R1

Rheinhard 24 5.07
Masami 24 5.10
Hara 24 5.11
Surikarn 23 5.00.48
Francis 23 5.00.54
Steen garaversen 23 5.00.70
Paul lemieux 23 5.00.82
Barry 23 5.00.84
Hodapp 23 5.00.97
David jun 23.01.32


R2

Rheinard 24 5.05
Masami 24 5.08
Daisuke 24 5.08.5
Billy 24 5.11.19
Francis 24 5.11.72
Steen 24 5.12.04
Paul lemieux 24 5.12.24
Surikarn = jiles groskamp 24 5.12.70
Suzuki 24 5.12.97


RHEINARD USING 415. END OF STORY!!!!!!!!!!!!!!!!!!

Speedie

There is no offical race coverage on this site. This is a thread on a forum. If you want coverage try espn. If not shut your hole and apreciate what is here and given by volunteers.

Hugo

iTrader: (1)

So now it's clear, Rheinard uses 415 but with:
-regular suspensions
or
-Evo4 suspensions???

Arun

It is very likely a combination of both.

mtc3od

I love it.

Speedie

Sorry I have little tolerance for ignorance today.

Hugo

iTrader: (1)

What do you mean?

clinttredway

iTrader: (8)

I agree

rayhuang

iTrader: (5)

WOW-I am most suprised by the large gap that Rheinhard still carries over Masami-3 sec. and a further ~7 seconds over A10.

Its a big gap for such a huge field of amazing drivers.

Cobra81li200

Well, if I was to do a Mix, I'd use the new front suspension with the old rear. There is just too much angular play in the rear hubs on the new version, due to the small distance between the bearings, and to their size.