Casper06

I'm going to pair a 8.5 Ballistic motor to a MM Pro ESC tonight but needed help on the wiring. The wires coming from the Castle ESC are red/white/black and from the Novak it is red/yellow/blue. Do I pair them by blue to black, yellow to white, red to red?

Thanks for the help.

imgumbydammit

If it's a sensored system you need to wire up the phases correctly A to A...B to B...C to C.This should be marked on the motor and esc.If it runs backwards you need to reverse it via the esc programming
If it's a sensorless system you can wire them up in any manner and if it runs backwards switch any two wires

hope this helps
Steve

Goingfast

iTrader: (29)

hi
The red wire for A and white for B and black for C
Looking from the back of of the motor. from left to right is A,B,C

Casper06

Thank you guys! I'm excited to get this running should be pretty sweet to have all that tune ability of Castle with a Ballistic motor.