Hot Bodies TCX
05-30-2011, 07:03 AM
#2881
Tech Adept
Gear diff oils
Hi guys,
Im currently running the spec r gear diff in the rear of my tcx. Im racing indoors on carpet using Fastrax 1000w oil. I was just wondering what are the cars handling characteristics of using a slightly thinner or thicker oil?
Im currently running the spec r gear diff in the rear of my tcx. Im racing indoors on carpet using Fastrax 1000w oil. I was just wondering what are the cars handling characteristics of using a slightly thinner or thicker oil?
05-30-2011, 11:08 AM
#2882
Around 1000cst
05-30-2011, 12:04 PM
#2883
Tech Master
iTrader: (19)
Stuff seen in the HB pits. (sorry no pics)
New Shock Towers
Steel Front Axles
New Top Deck
New Front Steering Knuckles
New Rear Hubs
New Chassis (in development, not ready yet)
New Front(rear) Toe Blocks
New Motor (seen in Hara-san's car) VERY FAST!
Also seen was the New TCFD Drift Car! Very Nice!
Can't forget the new Logo's and Decals!
New Shock Towers
Steel Front Axles
New Top Deck
New Front Steering Knuckles
New Rear Hubs
New Chassis (in development, not ready yet)
New Front(rear) Toe Blocks
New Motor (seen in Hara-san's car) VERY FAST!
Also seen was the New TCFD Drift Car! Very Nice!
Can't forget the new Logo's and Decals!
05-30-2011, 10:15 PM
#2885
hey Guys,
Have been running Xray for a few years and decided to move away and try out the TCX. Any hints/tips on the initial build?
Looking forward to getting a car setup that actually corners well
Thanks
Have been running Xray for a few years and decided to move away and try out the TCX. Any hints/tips on the initial build?
Looking forward to getting a car setup that actually corners well
Thanks
05-31-2011, 01:43 AM
#2887
Tech Apprentice
RedRc reported that Andy Moore used the new springs when winning UK nationals.
Any idea where I could see a setup sheet with info on which springs he uses?
Any idea where I could see a setup sheet with info on which springs he uses?
05-31-2011, 04:29 AM
#2888
anybody know what adapter i can use for the diff? can't seem to find HB diff cup adapters anymore. always out of stock. will yokomo and sakura 3.5's fit? 
Last edited by bigz; 05-31-2011 at 09:01 AM.
05-31-2011, 04:55 AM
#2889
I know there were new Moorespeed springs flying off the shelf at the BTCC meeting at Kemble in the UK on sunday. (Which Andy won). I think there was about 5 spring values. If you drop an email to the lads at www.mmrflux.co.uk then they should beable to tell you what they are.
05-31-2011, 07:17 AM
#2891
motor mount
Hello
Can you remove the small screwed foot on the motor mount? am running a bd and with the size of pinion I have to run it is very close.
Cheers
Spencer
Can you remove the small screwed foot on the motor mount? am running a bd and with the size of pinion I have to run it is very close.
Cheers
Spencer
05-31-2011, 07:57 AM
#2892
spec-r gear diff
Hello
Has any body run the spec r diff in the front and rear? if so whats the benfit over a spool and gear diff?
WHAT OIL WOULD YOU RUN IN THE FRONT?
Has any body run the spec r diff in the front and rear? if so whats the benfit over a spool and gear diff?
WHAT OIL WOULD YOU RUN IN THE FRONT?
