Hot Bodies TCX
#541
Tech Initiate
That's pretty much correct - though the spool in the TCX is not actually the v3 spool from before, as the bulkheads are 3mm closer together. I think the outdrives are the same, just the central portion is narrower and it is also made from purple anodised aluminium rather than black steel.
#542
That's pretty much correct - though the spool in the TCX is not actually the v3 spool from before, as the bulkheads are 3mm closer together. I think the outdrives are the same, just the central portion is narrower and it is also made from purple anodised aluminium rather than black steel.
#543
First run out with TCX today
Fan tast ic
So much more planted than my TC, the corner speed is something else, inproved my best lap times by 3/10ths of a second.
Just need to get used to how sharp the steering is.
Fan tast ic
So much more planted than my TC, the corner speed is something else, inproved my best lap times by 3/10ths of a second.
Just need to get used to how sharp the steering is.
#544
#545
did you use your tc set up with the tcx or its a brand new set up from scratch? tips will do as i don't have that much time to test it before our club race.
#547
Tech Lord
iTrader: (26)
#549
hey guys
got the photos for the tcx build up onto photobucket, the linkk is in the bottom of the post.
they'll be going up on the blog at some point this week aswell as a bit of a step by step process
well anyway heres the the pics
http://s3.photobucket.com/albums/y96/gazdesigns/tcx/
cheers.
luke
got the photos for the tcx build up onto photobucket, the linkk is in the bottom of the post.
they'll be going up on the blog at some point this week aswell as a bit of a step by step process
well anyway heres the the pics
http://s3.photobucket.com/albums/y96/gazdesigns/tcx/
cheers.
luke
#551
is it really that sharp? had my kit done but still haven't done any run with it due to work and stuff. hoping that i can run it this weekend.
did you use your tc set up with the tcx or its a brand new set up from scratch? tips will do as i don't have that much time to test it before our club race.
did you use your tc set up with the tcx or its a brand new set up from scratch? tips will do as i don't have that much time to test it before our club race.
Used the set up from my TC but ran the kit gold front springs rather than Assoc Blues I use on the TC.
3 hole 1.1 pistons, lengthened the shocks to get a bit more droop ft & rear 5mm on a Hudy gauge, I measure the distance between shock case and ball end cup, this was 12.6mm.
Shocks in holes 3 front & rear otherwise as kit settings.
1.5 camber ft & 2 rear
My car was not quickest in a straight line but awesome through the turns.
#552
Tech Elite
iTrader: (138)
hey guys
got the photos for the tcx build up onto photobucket, the linkk is in the bottom of the post.
they'll be going up on the blog at some point this week aswell as a bit of a step by step process
well anyway heres the the pics
http://s3.photobucket.com/albums/y96/gazdesigns/tcx/
cheers.
luke
got the photos for the tcx build up onto photobucket, the linkk is in the bottom of the post.
they'll be going up on the blog at some point this week aswell as a bit of a step by step process
well anyway heres the the pics
http://s3.photobucket.com/albums/y96/gazdesigns/tcx/
cheers.
luke
#553
Yep it was that good.
Used the set up from my TC but ran the kit gold front springs rather than Assoc Blues I use on the TC.
3 hole 1.1 pistons, lengthened the shocks to get a bit more droop ft & rear 5mm on a Hudy gauge, I measure the distance between shock case and ball end cup, this was 12.6mm.
Shocks in holes 3 front & rear otherwise as kit settings.
1.5 camber ft & 2 rear
My car was not quickest in a straight line but awesome through the turns.
Used the set up from my TC but ran the kit gold front springs rather than Assoc Blues I use on the TC.
3 hole 1.1 pistons, lengthened the shocks to get a bit more droop ft & rear 5mm on a Hudy gauge, I measure the distance between shock case and ball end cup, this was 12.6mm.
Shocks in holes 3 front & rear otherwise as kit settings.
1.5 camber ft & 2 rear
My car was not quickest in a straight line but awesome through the turns.
#554
#555