k_bojar

iTrader: (30)

interesting....any more info on this chassis???

kiloolli

Marcel Geiger is a German LRP Team Driver, he had made a few Chassis for his teammates. I think the Chassis is not for sale. I had buy my car from a Team Driver, he only drives Offroad.

ali_g

iTrader: (7)

3racing has 2 kinds, blue and black. only the blue one works?

wa7ash

iTrader: (38)

3Racing work well and you can barley see the hideous blue.

http://www.rcmart.com/catalog/rc-cyc...a-p-21870.html

idbdoug

iTrader: (41)

I'm interested in running this car some in VTA Classes. We use 25.5 motors at our track an the FDR is usually around 4.0 or so. Has anybody geared this low and if so what spur/pinion combo are you using???
thanks
idbdoug

wa7ash

iTrader: (38)

You will need the following combo,
48p 78Spur x 38Pinion = 4.003
64p 90Spur x 43Pinion = 4.081

idbdoug

iTrader: (41)

thanks
idbdoug

k_bojar

iTrader: (30)

never seen black ones for the cyclones from 3racing, only the blue ones

orzel24

iTrader: (2)

Was testing today FF and FR block 1.5 complete.

Great result, the car is the way easier to drive and smooth into the corner.

Spacers under blocks 1.5mm complete.

Gabe Boudoin

Any idea what i should gear this thing at with a 6.5 im at 115 27 right now and its really fast in the infield but really slow on the straight.

wa7ash

iTrader: (38)

115 34 = 6.59

niskie

iTrader: (9)

Hey Guys,

New to the TCX and as everyone else is experiencing or has experienced I have a large amount of steering chatter

I have noticed that there are many options for reducing this by using Tamiya/Yokomo/Top dog bones and various required changes for the spool.

I have been hunting around for replacement parts and most are out of stock everywhere

Just to make sure I am looking for the right parts, can anyone tell me the suggested tamiya dogbone part number? is it this: http://www.rc-mushroom.com/product_i...oducts_id=6905

Thanks

ali_g

iTrader: (7)

is it a must to run 4mm hubs?

k_bojar

iTrader: (30)

anyone see these yet??

Spring Steel Swing Shaft 44mm (For Hotbodies TCX) - http://www.egrmart.com/b2b/index.php...oducts_id=4154

Spring Steel Swing Shaft 46mm (For Hotbodies TCX) - http://www.egrmart.com/b2b/index.php...oducts_id=4155

they were just listed yesterday - wonder how they'll work with the spec-r diff and the standard diff outdrives?

orzel24

iTrader: (2)

I have tested with std 5mm its not neccesery enought sterring. This weekend i will test with 4mm hex.