Integy 16x9 v6 and Charging...
#1
Tech Regular
Thread Starter
Integy 16x9 v6 and Charging...
I was looking at the Fukuyama web site and it recomends to charge the batteries with a peak cut off of:
We suggest a .05 ( 50 mv ) for 6 cell packs.
We suggest a .03 ( 30 mv ) for 4 cell packs.
With the 16x9, there is mV/C and mV/P, which setting is this referring to?
Thanks....
We suggest a .05 ( 50 mv ) for 6 cell packs.
We suggest a .03 ( 30 mv ) for 4 cell packs.
With the 16x9, there is mV/C and mV/P, which setting is this referring to?
Thanks....
#2
Tech Adept
mv/p
0.05 is 50mv/p
0.03 is 30mv/p
0.05 is 50mv/p
0.03 is 30mv/p
#3
Tech Regular
Thread Starter
Rory,
Thank you very much....
Thank you very much....