Funkymojo

iTrader: (76)

Hi guys, i've got a mint condition Black Diamond LV V2 to trade. Decided not to get into stock class and planning to go to mod class instead hence looking to trade for a good condition 4002 Black Diamond BL, check out the link...

http://www.rctech.net/forum/r-c-item...ml#post8848960

Interested parties, do drop me a pm.

vafactor

iTrader: (6)

what makes you think that the BD speedo that you already have wouldn't be good for mod. They are super smooth. And you can always turn down the rip with the profile setting if you think it's too punchy. The BD speedo is an ideal choice for running mod.

Funkymojo

iTrader: (76)

We run 3.5T-5.5T in mod class in my country. I don't deny the LV V2 is an awesome esc but max it could take up to 6.5T. I don't wanna risk running a 3.5T-5.5T on it even when playing around with the profile settings and gear ratios.

MDawson

iTrader: (27)

Can anyone post the instructions on how to setup the speedo?

I left the box at home with the instructions.

Thanks.

CarbonJoe

http://www.modeltech.co.uk/catalog/i...onicsBDEsc.pdf

MDawson

iTrader: (27)

Thanks!

tellan

Just finished putting a new 1/12th pan car together.Its looking like stock racing in the Uk is changing to 13.5.
So after digging around in the pit box my 2 black diamonds are out to play again. No longer my main stream Escs till the upgrades come on line.

Fitted to car profile 5 no brake and rollout of 65mm with a GM 13.5 V3 motor.Testing at weekend , not sure on roll out but will see how it goes.

davidl

iTrader: (40)

tellan - you have a PM.

Dragonfire

iTrader: (1)

That rollout sounds a little low but should be a good starting point.

tellan

If too low what would you suggest. Ive come up with a theory.

1s lipo running GM10.5 57MM rollout is perfect. So divide 57 by 10.5 = 5.42 multiply this by 13.5 = 73.2mm rollout so going to use this as a starting rollout.

Ralf

iTrader: (2)

AE is apparently working hard on the next soft release,
Almost there according to them,...
I must say that I am starting to lack of patience, I just hope it's worth waiting for it.

joeymdz

iTrader: (13)

i heard it wasnt anything too impressive.... not saying who i heard it from.. but we all know him or her

Pedro81

when comes the new firmware?
do not take it anymore!

matt prigmore

The car with the quickest top speed at the stcc at moto arena was running the prototype software and this was by 2 mph and i was speed gunning them too.

since i have been using the bd esc by driving has got a lot more consistent,
the only place the bd lets me down is at the end of the main straight but it pulls very hard out of corner with out any sudden rush of uncontrolable power.(mid corner) so what i might be losing at the end of the straight i gain at the start and i'm looking forward for the update.

prodriver

BD wasn't the only car clocked at 49mph down the back straight Orca Speedo and also tekin was clocked at 49mph.

Cheers

RC