R/C Tech Forums

Go Back   R/C Tech Forums > General Forums > Electric On-Road

    Hide Wikipost
Old 10-28-2016, 12:43 PM   -   Wikipost
R/C Tech Forums Thread Wiki: 1/12 forum
Please read: This is a community-maintained wiki post containing the most important information from this thread. You may edit the Wiki once you have been a member for 90 days and have made 90 posts.
 
Last edit by: fenton06
This is a place to share knowledge related to 1/12th scale racing. It is not to be used for conversations.

KITS:
Click links to go to manufacturer product page. If any are missing please add them!

TIRES:
Pre-mounted tires readily available in the US:
Pre-mounted tires readily available in the Europe:
  • Hot Race ??

Gluing your own donuts:
https://www.youtube.com/watch?v=hm7z1rz-74s - Special thanks to Edward Pickering!
Truing tires:
https://www.youtube.com/watch?v=8wqHOLWq6Uc - Special thanks to Edward Pickering!

The following information came from HERE, with some editing and information added. Thanks Christian!

THIS MAY NEED UPDATING FOR THE NEW BLACK CRC CARPET

Brands:
BSR, CRC, Jaco:
Pro One is no longer selling to the public, but it and the brands above are all mounted by BSR and use the same foam. The nomenclature of the BSR vs Jaco/CRC is a little different in a few instances but is otherwise the same. The BSR foam consists of three families, and can be identifed as synthetics, naturals, and blends.

Synthetics - The old school, light weight, easy to true "dry feeling" tires. These include tires like CRC/Jaco Yellow (BSR White), Black, Gray, etc. These tires offer the highest wear rate and lowest grip. Many racers continue to use these nder high bite conditions.

Naturals - These tires are usually the best alternative for low bite and asphalt. They include Pink, Magenta, Double Pink, Lilac (BSR Team Purple), Purple, and other tires. These tires provide a ton of grip, but tend to get sticky in high bite conditions. This rubber does not wear as easily, and the cars will pick up gunk and fibers from the carpet under most high bite conditions. This is especially bad if the humidity is high.

Blends - These are the tires most people run today. They were initially called "JFT foam" by some, as it was believed that the tires were the same as the JFT tires. We can divide the blends further into two groups: high rubber and low rubber content. The high rubber would be the new rear Orange and Red from the BSR family, and the low rubber would be the Green and Blue varieties. When, asked about the difference, John Foister from BSR Tires said they came from the same "family" of foam, but they offered different grip. According to John, the Green/Blue has more bite than Orange/Red, but from track testing Oranges offer more bite than Green (being equivalent to in hardness) when the grip is high and absolutely no grip when it is lower. The Orange foam has a denser pore structure and the tire is not as prone to chunking. It is also important to note is that BSR Blue rears are not the same as the BSR Blue fronts!

JFT:
JFT stands for Japan Foam Tire. They started the new wave of foam tires we are all using now (Blue/Blu, Green/Greene, Dbl Blue, etc). These tires are a little different than the BSR tire family, but work in very similar conditions. They offers four varieties A (asphalt), C (carpet), S (???), and R (???). This does not mean that those types only work on that surface, but this is what they recommend.

JFT uses the same foam for fronts and rears if the color is the same.

A: Used on asphalt, considered close to the natural rubber variety and are named consistently with other natural tires.
C: Used on carpet, considered a blend.
S: Used on carpet?, tires are ???
R: Used on carpet?, tires are ???

For setup, the JFT foam seem to generate more bite than the BSR, therefore the car tends to be a little more aggressive.

Ulti:
Ulti is another Japanese brand that offers an array of compounds. They have their own way of rating tires, and are difficult to equate to other brands. They have 4 different varieties, each in varying degrees of hardness.

J: High rubber content tire, similar to Pink/ Magenta. Soft would be close to a pink. These offer the most bite and are great for asphalt/carpet front tire. (J hard being very popular)
X: "Balanced" blend, similar to JFT Blue/ Green. Soft is equivalent to Green, medium to Blue in hardness. Great for carpet!
Y: High synthetic blend with lower grip, and is not a very popular variety.
Z: A very expensive "special" foam that is supposed to be magic on asphalt. Only make it in soft shore.
European tires:
There are many great European foam tire brands that use their own types of foam, as well as traditional foams. SOmeone with more knowledge about them will need to fill this in!

Tire Diameter:
If you are racing on carpet, you have to evaluate how much grip your track has. If your track is low to medium grip, you can run bigger tires. If you are on higher bite you have to cut them smaller, there is simply no way around it. Bigger tires are needed for asphalt, especially in the rear. The larger tires provide much needed lateral bite.

Carpet (mm):
Low - Medium Bite
Front: 42.0 - 42.5
Rear: 42.5 - 43.00
Medium - High Bite
Front: 40.5 - 41.0
Rear: 41.5 - 42.0
Big Race
Front: 39.5 - 40.0
Rear: 40.5 - 41.0
Asphalt (mm):
Parking Lot
Front: 43.0 - 44.0
Rear: 44.0 - 45.0
Prepped High Bite
Front: 42.0 - 43.0
Rear: 43.0 - 44.0

Tire Saucing:
Most facilities have moved towards odorless traction additives such as SXT. Some of additives evaporate very quickly and some do not. This seems to be something that is also dependent on tire compound and ambient temperature. For example, saucing a Green compound seems like it never dries, especially when tjhe temperature is lower. We have found that wiping the tires off 15 minutes before we go run allows the sauce to cure, which makes the car come in much quicker with Green rears. Blue compounds on the other hand, do fine when wiped off right before hitting the track.

Saucing half front and full rear is a good initial starting point. If the front of the car is too agressive you can sauce les than half, or for a shorter amount of time.
Tire Fuzzing:
In conditions of increasing grip, foam tires will somewtimes get sticky and pick up fuzz and debris from the track. This is highly dependent on the rubber sedan tire that is being run at your local track and the compound/ type of foam you are running on you car. The softer the sedan tire and the harder/higher rubber content in your foam tire, trouble with fuzzing seems more likely to occur.

There are ways to get around fuzzing under most conditions, and usually involves the selection of the correct foam compound. The more fuzz you get, the softer/lower rubber content you want to run.

Examples:
Problem: Car fuzzes with Lilac/Team Purple fronts and car starts pushing.
Solution: Use a softer front tire and or different family of foam. Replace it with Blue or Double Blue front.

Problem: Car loses rear bite 6 minutes into the run. Blue rear tires look almost clean but have small carpet hairs.
Solution: Use Green rear tires. The softer compound wears instead of getting sticky, minimizing fuzz.

Tire Selection:
Starting out, pick 2 tire compounds for the front and rear. The following should have you covered 99% of the time.

Front - Green and Blue (BSR) or Green and Light Blue (JFT)
Rear - Blue and Double Blue (BSR) or Blue and Dark Blue (JFT)

You may wonder about other compounds out there and if they might be better, trust me, they probably won't be. Even if there are other tires that can be as fast, the synthetic family wears out really fast and the high natural rubber will probably fuzz on you over an 8 minute run. The blends family seems to be the most versatile foam type available today. They last awhile, and sticking to them will make your process of tire selection simpler.
Tire Charts:
BSR/CRC/Jaco



Contact



Corally



JFT (Japan Foam Tire)



Ulti



Enneti (Xceed)



ELECTRONICS:
ESC:
As of now, ROAR is staying 1S (3.7V nominal; 4.2V fully charged) for 1/12. There are many 1S ESC's with a built in BEC so nothing else is required to power the receiver and servo.

If you don't want to lock yourself into a 1S specific ESC, you do have other options! It is possible to use your 2S ESC without a booster or receiver pack, and the ESC simply supplies the lower voltage. If that does not appeal to you, you will need to use an Rx pack or booster. The Rx pack and booster will both supply the receiver with a higher voltage than the 1S pack.

If you decide to use an Rx pack, MAKE SURE TO REMOVE THE RED WIRE FROM THE ESC PLUG THAT GOES INTO THE RECEIVER!!!

If you choose to use a voltage booster, it works exactly how it sounds. Instead of plugging the ESC into the receiver, it plugs into the booster, and the booster plug goes to the ESC, supplying the higher voltage.

1S ESC:
If there are any missing please add them!!

If anyone would like a need for a chart comparing the ESC's specs PM fenton06 and I'll get one made and put in here!
Voltage Boosters:
If there are any missing please add them!
Servos:
BODIES:
Black Art (CRC - US Dist):
  • Audi R8C - BA002 - .020 Thick



  • Black Market (Mohawk 12) - BA005 - .020



  • Lola B10 - BA006 - .020 thick
  • Toyota TS030 - BA008 - .020 thick

    Lola - black/red, TS030 - green/pink


PROTOForm:

Reflex Racing/RSD:

SUSPENSION ADJUSTMENTS:

Print Wikipost

Reply
 
Thread Tools Search this Thread
Old 09-23-2005, 05:24 AM   #14566
ml
Tech Apprentice
 
ml's Avatar
 
Join Date: May 2004
Location: Jacksonville, FL
Posts: 84
Send a message via AIM to ml Send a message via Yahoo to ml Send a message via Skype™ to ml
Default

Quote:
Originally Posted by El Gatto
hi guys

does anyone know the item no. for the carbon fiber stiffener for the L4 front end??

cheers..
The cross brace is AE #4564.
ml is offline   Reply With Quote
Old 09-23-2005, 07:55 AM   #14567
Tech Fanatic
 
Join Date: Nov 2001
Location: Somewhere on earth
Posts: 927
Default CEFX with trinity style front end?

http://www.rc50.com/modules/coppermi...y/PICT0222.JPG

Has anyone got any news on this new CEFX? Is it Josh's car? Things have been fairly quite on CEFX for a while. Sorry about the size, link there now.

Last edited by Rick Draper; 09-23-2005 at 08:19 AM.
Rick Draper is offline   Reply With Quote
Old 09-23-2005, 08:01 AM   #14568
Tech Addict
 
radio_car_racer's Avatar
 
Join Date: Apr 2004
Posts: 543
Trader Rating: 1 (100%+)
Default

Quote:
Originally Posted by AdrianM
I finally saw the pic you were talking about. Nash changed the pic numbers up so it took me a minute to find it. You are correct. That is a machined delrin arm. That must be a new bit CRC is looking at producing.
you got the new link to pic to save us all some finger work?
radio_car_racer is offline   Reply With Quote
Old 09-23-2005, 08:04 AM   #14569
Tech Champion
 
rayhuang's Avatar
 
Join Date: Dec 2001
Location: Cleveland Heights, Ohio
Posts: 6,511
Trader Rating: 5 (100%+)
Send a message via AIM to rayhuang
Default

Wow-can you resize that picture or post from the smaller [icture of it?

Judging form the anodized green parts, SMC battery pac, Jacos and Truspeed motor and Kyosho parts box-all signs point to Cyruls car
rayhuang is offline   Reply With Quote
Old 09-23-2005, 08:04 AM   #14570
Tech Addict
 
radio_car_racer's Avatar
 
Join Date: Apr 2004
Posts: 543
Trader Rating: 1 (100%+)
Default

Quote:
Originally Posted by Rick Draper
Has anyone got any news on this new CEFX? Is it Josh's car? Things have been fairly quite on CEFX for a while. Thanks
So CEFX now have the Trinity front end whilst the Trinity Black Widow has gone over to Associated front end
radio_car_racer is offline   Reply With Quote
Old 09-23-2005, 09:37 AM   #14571
Tech Champion
 
AdrianM's Avatar
 
Join Date: Aug 2001
Location: Tampa, FL
Posts: 5,914
Trader Rating: 4 (100%+)
Default

If you can stay on top of it the Switchblade front end is the best 1/12th front end. However, lots of guys really struggle with it and end up going slower. It is also easy to jack up if you crash.

You need two skills to run a Trinity front end:

1. You crash rarely.

2. You are really good at attention to detail.
__________________
Adrian Martinez
What I run: Schumacher Mi5/Associated RC10R5.1/Associated RC12R5.2/Futaba/HobbyWing/Team EA Motorsports/BSR Racing
Where I run: Florida Indoor R/C Complex/Thunder Racing/Florida On Road State Series
AdrianM is offline   Reply With Quote
Old 09-23-2005, 05:56 PM   #14572
Tech Elite
 
1armed1's Avatar
 
Join Date: Apr 2005
Location: Northern Indiana
Posts: 3,071
Trader Rating: 79 (100%+)
Send a message via AIM to 1armed1
Default

need gear suggestions.
12L4 w 100 tooth spur, rear tires are at 1.955 inches

monster
c2
reedy quad

Thanks
Dayton
Track is 78x37 fast and flowing
__________________
Serpent,B-Fast Rc,Discount Rc Store,
92zero.com,Lunsford Racing, Xpert Rc,
Schelle Racing Innovations
1armed1 is offline   Reply With Quote
Old 09-23-2005, 06:48 PM   #14573
Tech Elite
 
celt's Avatar
 
Join Date: Jan 2004
Location: /dev/null
Posts: 2,196
Trader Rating: 5 (100%+)
Default

Are there issues with using a Spektrum DSM radio w/ 4-cell packs? On Horizon'e site, they claim that there was an issue with the earlier Airtronics M-8 modules, but that had been resolved.

Anyone hear of using the Spektrum in 1/12 successfully?

Damned, I would like to get that antennae out of my face for eight minutes.
__________________
"Soon they will get everything they deserve. This isn't about trite elitism, but the otherwise intellectual and educated classes refusing to think for themselves. I call it situational ignorance, and painfully intolerable."

Stan Garvin
celt is offline   Reply With Quote
Old 09-23-2005, 07:18 PM   #14574
Tech Elite
 
1armed1's Avatar
 
Join Date: Apr 2005
Location: Northern Indiana
Posts: 3,071
Trader Rating: 79 (100%+)
Send a message via AIM to 1armed1
Default

I'm using the original release setup and have not had any problems.
__________________
Serpent,B-Fast Rc,Discount Rc Store,
92zero.com,Lunsford Racing, Xpert Rc,
Schelle Racing Innovations
1armed1 is offline   Reply With Quote
Old 09-23-2005, 07:47 PM   #14575
Tech Elite
 
celt's Avatar
 
Join Date: Jan 2004
Location: /dev/null
Posts: 2,196
Trader Rating: 5 (100%+)
Default

Do you use a personal transponder?
__________________
"Soon they will get everything they deserve. This isn't about trite elitism, but the otherwise intellectual and educated classes refusing to think for themselves. I call it situational ignorance, and painfully intolerable."

Stan Garvin
celt is offline   Reply With Quote
Old 09-23-2005, 07:50 PM   #14576
Tech Elite
 
1armed1's Avatar
 
Join Date: Apr 2005
Location: Northern Indiana
Posts: 3,071
Trader Rating: 79 (100%+)
Send a message via AIM to 1armed1
Default

I don't
__________________
Serpent,B-Fast Rc,Discount Rc Store,
92zero.com,Lunsford Racing, Xpert Rc,
Schelle Racing Innovations
1armed1 is offline   Reply With Quote
Old 09-23-2005, 10:01 PM   #14577
Tech Elite
 
theisgroup's Avatar
 
Join Date: Apr 2002
Posts: 3,191
Trader Rating: 10 (100%+)
Default

i run one in my 1/12 with no problem and yes i run a pt with no cap and indoors. i have run it in mod down to a 9 turn without a problem.
__________________
yang lai

Team Tamale | Team Tekin | RCAmerica | Speedmerchant | Speedzone RC | EA Motorsports | Ko Propo USA | eXpress Motorsports | Parma/PSE
theisgroup is offline   Reply With Quote
Old 09-23-2005, 11:23 PM   #14578
Tech Fanatic
 
fast-ho-cars's Avatar
 
Join Date: Sep 2003
Location: it's a dry heat
Posts: 788
Default

Quote:
Originally Posted by rayhuang
Wow-can you resize that picture or post from the smaller [icture of it?

Judging form the anodized green parts, SMC battery pac, Jacos and Truspeed motor and Kyosho parts box-all signs point to Cyruls car
1.204-7V cells.......wow, has to be his our someone definetly sponsored well.

wonder how many seconds on the cells?
fast-ho-cars is offline   Reply With Quote
Old 09-23-2005, 11:28 PM   #14579
Tech Apprentice
 
Join Date: Jul 2005
Posts: 76
Default asphalt?

Hello! I have several questions and to avoid posting them in several posts, I put them all here.

I was wondering how 1/12 pan cars run on asphalt or are they really designed to run on carpet? is it hard on the cars (excessive bottoming out, tire wear, etc.)? difficult to drive? all we have in our country is asphalt, nothing indoor.

Another thing, if you compare the cost of running touring cars to 1/12 RCs..which is cheaper? considering the fact that 1/12 run 4 cells thats a big help in terms of cost? thanks!
nemo812 is offline   Reply With Quote
Old 09-23-2005, 11:37 PM   #14580
Tech Fanatic
 
fast-ho-cars's Avatar
 
Join Date: Sep 2003
Location: it's a dry heat
Posts: 788
Default

alot of 1/12 races are held on asphalt. it helps when the track is blown off and sugar watered or VHT'd.

until our carpet track reopened, all 1/12 in our town was on asphalt.


TC vs 1/12...i do both. to me, they basicly cost about the same. 2 cell difference ain't killing me

my foams cost the same
both use the same tire truer, chargers, etc.
fast-ho-cars is offline   Reply With Quote
Reply

Similar Threads
Thread Thread Starter Forum Replies Last Post
New to the forum mig rod Electric Off-Road 1 01-05-2008 05:23 PM
hi i need help and im new to the forum racer4 Rookie Zone 4 01-21-2007 02:37 PM
Why is this forum listed under the On Road Forum? sport10 Onroad Nitro Engine Zone 0 01-11-2007 08:06 AM
Forum Changes... futureal Wisconsin & Illinois Racing 3 10-28-2002 09:26 PM



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off



All times are GMT -7. It is currently 07:03 AM.


Powered By: vBulletin v3.9.2.1
Privacy Policy | Terms of Use | Advertise Content © 2001-2011 RCTech.net

SEO by vBSEO 3.5.0