R/C Tech Forums

Go Back   R/C Tech Forums > General Forums > Electric On-Road

    Hide Wikipost
Old 10-28-2016, 12:43 PM   -   Wikipost
R/C Tech Forums Thread Wiki: 1/12 forum
Please read: This is a community-maintained wiki post containing the most important information from this thread. You may edit the Wiki once you have been a member for 90 days and have made 90 posts.
 
Last edit by: fenton06
This is a place to share knowledge related to 1/12th scale racing. It is not to be used for conversations.

KITS:
Click links to go to manufacturer product page. If any are missing please add them!

TIRES:
Pre-mounted tires readily available in the US:
Pre-mounted tires readily available in the Europe:
  • Hot Race ??

Gluing your own donuts:
https://www.youtube.com/watch?v=hm7z1rz-74s - Special thanks to Edward Pickering!
Truing tires:
https://www.youtube.com/watch?v=8wqHOLWq6Uc - Special thanks to Edward Pickering!

The following information came from HERE, with some editing and information added. Thanks Christian!

THIS MAY NEED UPDATING FOR THE NEW BLACK CRC CARPET

Brands:
BSR, CRC, Jaco:
Pro One is no longer selling to the public, but it and the brands above are all mounted by BSR and use the same foam. The nomenclature of the BSR vs Jaco/CRC is a little different in a few instances but is otherwise the same. The BSR foam consists of three families, and can be identifed as synthetics, naturals, and blends.

Synthetics - The old school, light weight, easy to true "dry feeling" tires. These include tires like CRC/Jaco Yellow (BSR White), Black, Gray, etc. These tires offer the highest wear rate and lowest grip. Many racers continue to use these nder high bite conditions.

Naturals - These tires are usually the best alternative for low bite and asphalt. They include Pink, Magenta, Double Pink, Lilac (BSR Team Purple), Purple, and other tires. These tires provide a ton of grip, but tend to get sticky in high bite conditions. This rubber does not wear as easily, and the cars will pick up gunk and fibers from the carpet under most high bite conditions. This is especially bad if the humidity is high.

Blends - These are the tires most people run today. They were initially called "JFT foam" by some, as it was believed that the tires were the same as the JFT tires. We can divide the blends further into two groups: high rubber and low rubber content. The high rubber would be the new rear Orange and Red from the BSR family, and the low rubber would be the Green and Blue varieties. When, asked about the difference, John Foister from BSR Tires said they came from the same "family" of foam, but they offered different grip. According to John, the Green/Blue has more bite than Orange/Red, but from track testing Oranges offer more bite than Green (being equivalent to in hardness) when the grip is high and absolutely no grip when it is lower. The Orange foam has a denser pore structure and the tire is not as prone to chunking. It is also important to note is that BSR Blue rears are not the same as the BSR Blue fronts!

JFT:
JFT stands for Japan Foam Tire. They started the new wave of foam tires we are all using now (Blue/Blu, Green/Greene, Dbl Blue, etc). These tires are a little different than the BSR tire family, but work in very similar conditions. They offers four varieties A (asphalt), C (carpet), S (???), and R (???). This does not mean that those types only work on that surface, but this is what they recommend.

JFT uses the same foam for fronts and rears if the color is the same.

A: Used on asphalt, considered close to the natural rubber variety and are named consistently with other natural tires.
C: Used on carpet, considered a blend.
S: Used on carpet?, tires are ???
R: Used on carpet?, tires are ???

For setup, the JFT foam seem to generate more bite than the BSR, therefore the car tends to be a little more aggressive.

Ulti:
Ulti is another Japanese brand that offers an array of compounds. They have their own way of rating tires, and are difficult to equate to other brands. They have 4 different varieties, each in varying degrees of hardness.

J: High rubber content tire, similar to Pink/ Magenta. Soft would be close to a pink. These offer the most bite and are great for asphalt/carpet front tire. (J hard being very popular)
X: "Balanced" blend, similar to JFT Blue/ Green. Soft is equivalent to Green, medium to Blue in hardness. Great for carpet!
Y: High synthetic blend with lower grip, and is not a very popular variety.
Z: A very expensive "special" foam that is supposed to be magic on asphalt. Only make it in soft shore.
European tires:
There are many great European foam tire brands that use their own types of foam, as well as traditional foams. SOmeone with more knowledge about them will need to fill this in!

Tire Diameter:
If you are racing on carpet, you have to evaluate how much grip your track has. If your track is low to medium grip, you can run bigger tires. If you are on higher bite you have to cut them smaller, there is simply no way around it. Bigger tires are needed for asphalt, especially in the rear. The larger tires provide much needed lateral bite.

Carpet (mm):
Low - Medium Bite
Front: 42.0 - 42.5
Rear: 42.5 - 43.00
Medium - High Bite
Front: 40.5 - 41.0
Rear: 41.5 - 42.0
Big Race
Front: 39.5 - 40.0
Rear: 40.5 - 41.0
Asphalt (mm):
Parking Lot
Front: 43.0 - 44.0
Rear: 44.0 - 45.0
Prepped High Bite
Front: 42.0 - 43.0
Rear: 43.0 - 44.0

Tire Saucing:
Most facilities have moved towards odorless traction additives such as SXT. Some of additives evaporate very quickly and some do not. This seems to be something that is also dependent on tire compound and ambient temperature. For example, saucing a Green compound seems like it never dries, especially when tjhe temperature is lower. We have found that wiping the tires off 15 minutes before we go run allows the sauce to cure, which makes the car come in much quicker with Green rears. Blue compounds on the other hand, do fine when wiped off right before hitting the track.

Saucing half front and full rear is a good initial starting point. If the front of the car is too agressive you can sauce les than half, or for a shorter amount of time.
Tire Fuzzing:
In conditions of increasing grip, foam tires will somewtimes get sticky and pick up fuzz and debris from the track. This is highly dependent on the rubber sedan tire that is being run at your local track and the compound/ type of foam you are running on you car. The softer the sedan tire and the harder/higher rubber content in your foam tire, trouble with fuzzing seems more likely to occur.

There are ways to get around fuzzing under most conditions, and usually involves the selection of the correct foam compound. The more fuzz you get, the softer/lower rubber content you want to run.

Examples:
Problem: Car fuzzes with Lilac/Team Purple fronts and car starts pushing.
Solution: Use a softer front tire and or different family of foam. Replace it with Blue or Double Blue front.

Problem: Car loses rear bite 6 minutes into the run. Blue rear tires look almost clean but have small carpet hairs.
Solution: Use Green rear tires. The softer compound wears instead of getting sticky, minimizing fuzz.

Tire Selection:
Starting out, pick 2 tire compounds for the front and rear. The following should have you covered 99% of the time.

Front - Green and Blue (BSR) or Green and Light Blue (JFT)
Rear - Blue and Double Blue (BSR) or Blue and Dark Blue (JFT)

You may wonder about other compounds out there and if they might be better, trust me, they probably won't be. Even if there are other tires that can be as fast, the synthetic family wears out really fast and the high natural rubber will probably fuzz on you over an 8 minute run. The blends family seems to be the most versatile foam type available today. They last awhile, and sticking to them will make your process of tire selection simpler.
Tire Charts:
BSR/CRC/Jaco



Contact



Corally



JFT (Japan Foam Tire)



Ulti



Enneti (Xceed)



ELECTRONICS:
ESC:
As of now, ROAR is staying 1S (3.7V nominal; 4.2V fully charged) for 1/12. There are many 1S ESC's with a built in BEC so nothing else is required to power the receiver and servo.

If you don't want to lock yourself into a 1S specific ESC, you do have other options! It is possible to use your 2S ESC without a booster or receiver pack, and the ESC simply supplies the lower voltage. If that does not appeal to you, you will need to use an Rx pack or booster. The Rx pack and booster will both supply the receiver with a higher voltage than the 1S pack.

If you decide to use an Rx pack, MAKE SURE TO REMOVE THE RED WIRE FROM THE ESC PLUG THAT GOES INTO THE RECEIVER!!!

If you choose to use a voltage booster, it works exactly how it sounds. Instead of plugging the ESC into the receiver, it plugs into the booster, and the booster plug goes to the ESC, supplying the higher voltage.

1S ESC:
If there are any missing please add them!!

If anyone would like a need for a chart comparing the ESC's specs PM fenton06 and I'll get one made and put in here!
Voltage Boosters:
If there are any missing please add them!
Servos:
BODIES:
Black Art (CRC - US Dist):
  • Audi R8C - BA002 - .020 Thick



  • Black Market (Mohawk 12) - BA005 - .020



  • Lola B10 - BA006 - .020 thick
  • Toyota TS030 - BA008 - .020 thick

    Lola - black/red, TS030 - green/pink


PROTOForm:

Reflex Racing/RSD:

SUSPENSION ADJUSTMENTS:

Print Wikipost

Reply
 
Thread Tools Search this Thread
Old 05-01-2005, 09:51 AM   #12901
Tech Fanatic
 
crimson eagle's Avatar
 
Join Date: Jun 2003
Location: Nor Cal
Posts: 841
Send a message via ICQ to crimson eagle
Default

Bill,

yes, there is no way I can do the wheel thing, I just can't deal with that.

Chris
crimson eagle is offline   Reply With Quote
Old 05-01-2005, 10:20 AM   #12902
Tech Champion
 
Still Bill's Avatar
 
Join Date: Jan 2004
Location: Reno, NV
Posts: 7,016
Trader Rating: 11 (100%+)
Default

Quote:
Originally posted by crimson eagle
Bill,

yes, there is no way I can do the wheel thing, I just can't deal with that.

Chris
Chris,

Yes, we know you have your "limits". Too bad yours aren't as limited as mine though...

Bill
__________________
Constantly evolving CRC WGT and WGT-R/T...Carpet & Asphalt...All thanks to Team CRC.
Still Bill is offline   Reply With Quote
Old 05-01-2005, 11:04 AM   #12903
Tech Master
 
Switch Blade's Avatar
 
Join Date: Jan 2003
Location: The British Invasion
Posts: 1,078
Send a message via AIM to Switch Blade
Default

I have a problem, and It may be simple and I am over looking something, but how are you supose to change the castor on an L4? I cant insert my wrench into the screws that hold the hinge pins in place. The only way I was thinking of doing it was by using those L wrenches. Am i overlooking something?
Switch Blade is offline   Reply With Quote
Old 05-01-2005, 11:16 AM   #12904
Tech Addict
 
Thraex's Avatar
 
Join Date: Nov 2004
Posts: 518
Default

There are wrenches on the market with with a sort of "ball" on the tip, so you can put it in the screw with an angle.
In know hudy makes them, something like this .
__________________
Thijs van M[HPI/HB]
Thraex is offline   Reply With Quote
Old 05-01-2005, 11:43 AM   #12905
Tech Champion
 
Still Bill's Avatar
 
Join Date: Jan 2004
Location: Reno, NV
Posts: 7,016
Trader Rating: 11 (100%+)
Default 1/12th scale shootouts at Ripon

Special announcement...Because of Mother's Day next Sunday. Ripon will be racing on Saturday night for the next two weeks.

I am expecting an absolute 1/12th scale shootout by those that don't have to be at mom's house on Saturday too...
__________________
Constantly evolving CRC WGT and WGT-R/T...Carpet & Asphalt...All thanks to Team CRC.
Still Bill is offline   Reply With Quote
Old 05-01-2005, 11:49 AM   #12906
Tech Fanatic
 
revzalot's Avatar
 
Join Date: Apr 2004
Location: Nor * Cal
Posts: 959
Trader Rating: 4 (100%+)
Default Re: 1/12th scale shootouts at Ripon

Quote:
Originally posted by JRX-S Bill
Special announcement...Because of Mother's Day next Sunday. Ripon will be racing on Saturday night for the next two weeks.

I am expecting an absolute 1/12th scale shootout by those that don't have to be at mom's house on Saturday too...
Ripon is the most awesome 12th scale track I've been to. It's the best kept secret in N. California.
__________________
www.revzalotmotorsports.com
revzalot is offline   Reply With Quote
Old 05-01-2005, 11:52 AM   #12907
Tech Champion
 
Still Bill's Avatar
 
Join Date: Jan 2004
Location: Reno, NV
Posts: 7,016
Trader Rating: 11 (100%+)
Default Re: Re: 1/12th scale shootouts at Ripon

Quote:
Originally posted by revzalot
Ripon is the most awesome 12th scale track I've been to. It's the best kept secret in N. California.
Come on Rev...It's the best kept secret in the world...Shhhhhh!
__________________
Constantly evolving CRC WGT and WGT-R/T...Carpet & Asphalt...All thanks to Team CRC.
Still Bill is offline   Reply With Quote
Old 05-01-2005, 12:29 PM   #12908
Tech Master
 
Soviet's Avatar
 
Join Date: May 2004
Location: Littleton, CO - USA
Posts: 1,712
Trader Rating: 2 (100%+)
Default

Quote:
Originally posted by Switch Blade
I have a problem, and It may be simple and I am over looking something, but how are you supose to change the castor on an L4? I cant insert my wrench into the screws that hold the hinge pins in place. The only way I was thinking of doing it was by using those L wrenches. Am i overlooking something?
Fixed caster is adjusted by moving the white shims to the different locations on the hingepin.

Dynamic caster is adjusted by changing out the caster blocks. (ie. 0,5,10 degree blocks)
__________________
"You don't get hurt racing little cars..."

-Me
Soviet is offline   Reply With Quote
Old 05-01-2005, 12:32 PM   #12909
Tech Master
 
Switch Blade's Avatar
 
Join Date: Jan 2003
Location: The British Invasion
Posts: 1,078
Send a message via AIM to Switch Blade
Default

i know how to adjust caster, I was wondering how to actually adjust it becasue the location of the screws is hard to get a regular hex wrench to work. Someone recomended a ball hex wrench, so maybe ill try that, or just use the L wrench supplied with the kit
Switch Blade is offline   Reply With Quote
Old 05-01-2005, 12:34 PM   #12910
Tech Master
 
Switch Blade's Avatar
 
Join Date: Jan 2003
Location: The British Invasion
Posts: 1,078
Send a message via AIM to Switch Blade
Default

if you dont know what im talking about, i am running the 10 degree mounts, and want to move the caster shims where both are at the top, which i think is 6-4 degrees of caster, but like I said, the location of the screws is difficult to remove and was just wondering how to properly remove them
Switch Blade is offline   Reply With Quote
Old 05-01-2005, 12:45 PM   #12911
Tech Champion
 
Still Bill's Avatar
 
Join Date: Jan 2004
Location: Reno, NV
Posts: 7,016
Trader Rating: 11 (100%+)
Default

I think I understand. I take the whole front end off of the chassis to change my caster blocks between 0-5-10.
__________________
Constantly evolving CRC WGT and WGT-R/T...Carpet & Asphalt...All thanks to Team CRC.
Still Bill is offline   Reply With Quote
Old 05-01-2005, 02:29 PM   #12912
Tech Regular
 
Join Date: Dec 2001
Posts: 333
Default

Chris no spanking in Ripon, TQ would have been mine but as you know I was running 3300 in the second heat and at the 7 min mark 32 lap pase they fell off. , the noose is getting tighter for you my friend. The fall will begin next race. Fast lap time went to………who. With some new 3700 KC Racing batteries next week you will go down in flames lol. PS did you pay those back markers to block me in the main lol.




Kc Racing Batteries & Motors


Charlie

Last edited by gotyournumber; 05-01-2005 at 02:35 PM.
gotyournumber is offline   Reply With Quote
Old 05-01-2005, 04:09 PM   #12913
Tech Fanatic
 
crimson eagle's Avatar
 
Join Date: Jun 2003
Location: Nor Cal
Posts: 841
Send a message via ICQ to crimson eagle
Default

Charlie,

If it allows you to sleep at night then you can think that and yes I know you can have a good 14.88 seconds worth of driving, unfortunately the race is 8 minutes long. I am interested to see the results to see what my time was for the final, I don't know if I broke my TQ or not.

On a more serious note, next week is going to be great as Jrrc and Ashby are going very well. OD may of knocked some more of his rust off too. If we can get two finals going then a little of the chance element will be reduced.

Chris
crimson eagle is offline   Reply With Quote
Old 05-01-2005, 05:40 PM   #12914
Tech Master
 
Jeff Brown's Avatar
 
Join Date: Nov 2003
Location: Orlando, FL
Posts: 1,913
Default 12th scale website

hey guys, back years ago I used to run a 12th scale only website. Buddy and I were thinking about putting it back up online. Just wondering if there would be interest for it.

Setups...... reports..... tips and tricks...... racers rides.... everything. All just 12th scale. Thanks.

Jeff
__________________
SXT Traction Compounds | www.TractionCompound.com
Jeff Brown is offline   Reply With Quote
Old 05-01-2005, 05:41 PM   #12915
Tech Master
 
dakrat's Avatar
 
Join Date: Nov 2004
Location: 96th ABW
Posts: 1,581
Default Re: 12th scale website

Quote:
Originally posted by Jeff Brown
hey guys, back years ago I used to run a 12th scale only website. Buddy and I were thinking about putting it back up online. Just wondering if there would be interest for it.

Setups...... reports..... tips and tricks...... racers rides.... everything. All just 12th scale. Thanks.

Jeff

jeff ive been looking all over the internet for a site just for 12th scales. that is an awesome idea!
dakrat is offline   Reply With Quote
Reply

Similar Threads
Thread Thread Starter Forum Replies Last Post
New to the forum mig rod Electric Off-Road 1 01-05-2008 05:23 PM
hi i need help and im new to the forum racer4 Rookie Zone 4 01-21-2007 02:37 PM
Why is this forum listed under the On Road Forum? sport10 Onroad Nitro Engine Zone 0 01-11-2007 08:06 AM
Forum Changes... futureal Wisconsin & Illinois Racing 3 10-28-2002 09:26 PM



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off



All times are GMT -7. It is currently 07:01 PM.


Powered By: vBulletin v3.9.2.1
Privacy Policy | Terms of Use | Advertise Content © 2001-2011 RCTech.net

SEO by vBSEO 3.5.0