R/C Tech Forums

Go Back   R/C Tech Forums > General Forums > Electric On-Road

    Hide Wikipost
Old 10-28-2016, 12:43 PM   -   Wikipost
R/C Tech Forums Thread Wiki: 1/12 forum
Please read: This is a community-maintained wiki post containing the most important information from this thread. You may edit the Wiki once you have been a member for 90 days and have made 90 posts.
 
Last edit by: fenton06
This is a place to share knowledge related to 1/12th scale racing. It is not to be used for conversations.

KITS:
Click links to go to manufacturer product page. If any are missing please add them!

TIRES:
Pre-mounted tires readily available in the US:
Pre-mounted tires readily available in the Europe:
  • Hot Race ??

Gluing your own donuts:
https://www.youtube.com/watch?v=hm7z1rz-74s - Special thanks to Edward Pickering!
Truing tires:
https://www.youtube.com/watch?v=8wqHOLWq6Uc - Special thanks to Edward Pickering!

The following information came from HERE, with some editing and information added. Thanks Christian!

THIS MAY NEED UPDATING FOR THE NEW BLACK CRC CARPET

Brands:
BSR, CRC, Jaco:
Pro One is no longer selling to the public, but it and the brands above are all mounted by BSR and use the same foam. The nomenclature of the BSR vs Jaco/CRC is a little different in a few instances but is otherwise the same. The BSR foam consists of three families, and can be identifed as synthetics, naturals, and blends.

Synthetics - The old school, light weight, easy to true "dry feeling" tires. These include tires like CRC/Jaco Yellow (BSR White), Black, Gray, etc. These tires offer the highest wear rate and lowest grip. Many racers continue to use these nder high bite conditions.

Naturals - These tires are usually the best alternative for low bite and asphalt. They include Pink, Magenta, Double Pink, Lilac (BSR Team Purple), Purple, and other tires. These tires provide a ton of grip, but tend to get sticky in high bite conditions. This rubber does not wear as easily, and the cars will pick up gunk and fibers from the carpet under most high bite conditions. This is especially bad if the humidity is high.

Blends - These are the tires most people run today. They were initially called "JFT foam" by some, as it was believed that the tires were the same as the JFT tires. We can divide the blends further into two groups: high rubber and low rubber content. The high rubber would be the new rear Orange and Red from the BSR family, and the low rubber would be the Green and Blue varieties. When, asked about the difference, John Foister from BSR Tires said they came from the same "family" of foam, but they offered different grip. According to John, the Green/Blue has more bite than Orange/Red, but from track testing Oranges offer more bite than Green (being equivalent to in hardness) when the grip is high and absolutely no grip when it is lower. The Orange foam has a denser pore structure and the tire is not as prone to chunking. It is also important to note is that BSR Blue rears are not the same as the BSR Blue fronts!

JFT:
JFT stands for Japan Foam Tire. They started the new wave of foam tires we are all using now (Blue/Blu, Green/Greene, Dbl Blue, etc). These tires are a little different than the BSR tire family, but work in very similar conditions. They offers four varieties A (asphalt), C (carpet), S (???), and R (???). This does not mean that those types only work on that surface, but this is what they recommend.

JFT uses the same foam for fronts and rears if the color is the same.

A: Used on asphalt, considered close to the natural rubber variety and are named consistently with other natural tires.
C: Used on carpet, considered a blend.
S: Used on carpet?, tires are ???
R: Used on carpet?, tires are ???

For setup, the JFT foam seem to generate more bite than the BSR, therefore the car tends to be a little more aggressive.

Ulti:
Ulti is another Japanese brand that offers an array of compounds. They have their own way of rating tires, and are difficult to equate to other brands. They have 4 different varieties, each in varying degrees of hardness.

J: High rubber content tire, similar to Pink/ Magenta. Soft would be close to a pink. These offer the most bite and are great for asphalt/carpet front tire. (J hard being very popular)
X: "Balanced" blend, similar to JFT Blue/ Green. Soft is equivalent to Green, medium to Blue in hardness. Great for carpet!
Y: High synthetic blend with lower grip, and is not a very popular variety.
Z: A very expensive "special" foam that is supposed to be magic on asphalt. Only make it in soft shore.
European tires:
There are many great European foam tire brands that use their own types of foam, as well as traditional foams. SOmeone with more knowledge about them will need to fill this in!

Tire Diameter:
If you are racing on carpet, you have to evaluate how much grip your track has. If your track is low to medium grip, you can run bigger tires. If you are on higher bite you have to cut them smaller, there is simply no way around it. Bigger tires are needed for asphalt, especially in the rear. The larger tires provide much needed lateral bite.

Carpet (mm):
Low - Medium Bite
Front: 42.0 - 42.5
Rear: 42.5 - 43.00
Medium - High Bite
Front: 40.5 - 41.0
Rear: 41.5 - 42.0
Big Race
Front: 39.5 - 40.0
Rear: 40.5 - 41.0
Asphalt (mm):
Parking Lot
Front: 43.0 - 44.0
Rear: 44.0 - 45.0
Prepped High Bite
Front: 42.0 - 43.0
Rear: 43.0 - 44.0

Tire Saucing:
Most facilities have moved towards odorless traction additives such as SXT. Some of additives evaporate very quickly and some do not. This seems to be something that is also dependent on tire compound and ambient temperature. For example, saucing a Green compound seems like it never dries, especially when tjhe temperature is lower. We have found that wiping the tires off 15 minutes before we go run allows the sauce to cure, which makes the car come in much quicker with Green rears. Blue compounds on the other hand, do fine when wiped off right before hitting the track.

Saucing half front and full rear is a good initial starting point. If the front of the car is too agressive you can sauce les than half, or for a shorter amount of time.
Tire Fuzzing:
In conditions of increasing grip, foam tires will somewtimes get sticky and pick up fuzz and debris from the track. This is highly dependent on the rubber sedan tire that is being run at your local track and the compound/ type of foam you are running on you car. The softer the sedan tire and the harder/higher rubber content in your foam tire, trouble with fuzzing seems more likely to occur.

There are ways to get around fuzzing under most conditions, and usually involves the selection of the correct foam compound. The more fuzz you get, the softer/lower rubber content you want to run.

Examples:
Problem: Car fuzzes with Lilac/Team Purple fronts and car starts pushing.
Solution: Use a softer front tire and or different family of foam. Replace it with Blue or Double Blue front.

Problem: Car loses rear bite 6 minutes into the run. Blue rear tires look almost clean but have small carpet hairs.
Solution: Use Green rear tires. The softer compound wears instead of getting sticky, minimizing fuzz.

Tire Selection:
Starting out, pick 2 tire compounds for the front and rear. The following should have you covered 99% of the time.

Front - Green and Blue (BSR) or Green and Light Blue (JFT)
Rear - Blue and Double Blue (BSR) or Blue and Dark Blue (JFT)

You may wonder about other compounds out there and if they might be better, trust me, they probably won't be. Even if there are other tires that can be as fast, the synthetic family wears out really fast and the high natural rubber will probably fuzz on you over an 8 minute run. The blends family seems to be the most versatile foam type available today. They last awhile, and sticking to them will make your process of tire selection simpler.
Tire Charts:
BSR/CRC/Jaco



Contact



Corally



JFT (Japan Foam Tire)



Ulti



Enneti (Xceed)



ELECTRONICS:
ESC:
As of now, ROAR is staying 1S (3.7V nominal; 4.2V fully charged) for 1/12. There are many 1S ESC's with a built in BEC so nothing else is required to power the receiver and servo.

If you don't want to lock yourself into a 1S specific ESC, you do have other options! It is possible to use your 2S ESC without a booster or receiver pack, and the ESC simply supplies the lower voltage. If that does not appeal to you, you will need to use an Rx pack or booster. The Rx pack and booster will both supply the receiver with a higher voltage than the 1S pack.

If you decide to use an Rx pack, MAKE SURE TO REMOVE THE RED WIRE FROM THE ESC PLUG THAT GOES INTO THE RECEIVER!!!

If you choose to use a voltage booster, it works exactly how it sounds. Instead of plugging the ESC into the receiver, it plugs into the booster, and the booster plug goes to the ESC, supplying the higher voltage.

1S ESC:
If there are any missing please add them!!

If anyone would like a need for a chart comparing the ESC's specs PM fenton06 and I'll get one made and put in here!
Voltage Boosters:
If there are any missing please add them!
Servos:
BODIES:
Black Art (CRC - US Dist):
  • Audi R8C - BA002 - .020 Thick



  • Black Market (Mohawk 12) - BA005 - .020



  • Lola B10 - BA006 - .020 thick
  • Toyota TS030 - BA008 - .020 thick

    Lola - black/red, TS030 - green/pink


PROTOForm:

Reflex Racing/RSD:

SUSPENSION ADJUSTMENTS:

Print Wikipost

Reply
 
Thread Tools Search this Thread
Old 03-05-2005, 10:51 AM   #11671
Tech Master
 
dakrat's Avatar
 
Join Date: Nov 2004
Location: 96th ABW
Posts: 1,581
Default

does the receiver pack help when running stock? or is just adding weights to the car? i dont see anybody running receiver packs on stock motor.
dakrat is offline   Reply With Quote
Old 03-05-2005, 10:57 AM   #11672
Moderator
 
Pro ten Holland's Avatar
 
Join Date: May 2003
Location: Druten/Holland (Europe)
Posts: 1,658
Trader Rating: 1 (100%+)
Default

Quote:
Originally posted by speedy-932
Hi,

Iīm planning to start 12scale... nice class...
I think i will race standard so I need a 6 cell car... unfortunately i canīt find such a car anywhere... Here in Germany many people race Corally... I donīt like Corally so thatīs no possiblity for me.
Which car would you suggest?
And where to get? I will order anywhere in the world if the price is right because my LHS donīt carry 12scale cars...

Thanks
Chris
Have a look here:
http://www.viol-model-racing.de/violshop/shopindex.htm
This shop is in Neerssen, in Germany. It's where I race (even though I'm from Holland). The next race is tomorrow, so if you're in the neighbourhood, come have a look!
They have a great shop, stocking parts from Corally, Associated and CRC.
He ususally has three or more six-pack cars in stock.
Think about trying a 4cell modified car. It's easier on the motor than a 6cell stock car. It's also sligtly faster in the corners. The only downside on a 4cell mod car in comparison to a 6cell stock car, sis that it's more difficult to make 8 minutes, but imho that's part of the thrill.
__________________
http://www.rc-lemans.de/
Pro ten Holland is offline   Reply With Quote
Old 03-05-2005, 11:04 AM   #11673
Tech Elite
 
odpurple's Avatar
 
Join Date: Dec 2002
Location: San Francisco
Posts: 2,187
Default

Quote:
Originally posted by dakrat
does the receiver pack help when running stock? or is just adding weights to the car? i dont see anybody running receiver packs on stock motor.
You don't need a reciever pack for stock class. I don't think the extra weight hurts too much but you can save over 20 grams by not using it. Some say you need a rec pack if you run a digital servo, but my team mate runs a KO 949 with no rec pack and it works fine.
odpurple is offline   Reply With Quote
Old 03-05-2005, 11:25 AM   #11674
Tech Elite
 
vtl1180ny's Avatar
R/C Tech Charter Subscriber
 
Join Date: Sep 2003
Location: Wrong Island
Posts: 4,961
Default

I've been getting glitches while running the car with others on the track.... Plus I went with a digital servo... The glitching is only while running full throttle so I'm hoping the reciever pack will fix the problem... The LiPo pack I got weighs 8 grams, I'm not worried...
__________________
I still lurk....
vtl1180ny is offline   Reply With Quote
Old 03-05-2005, 12:25 PM   #11675
Tech Elite
 
odpurple's Avatar
 
Join Date: Dec 2002
Location: San Francisco
Posts: 2,187
Default

Cool, 8 grams compared to 20 for a nmhd pack is a big savings. I think the regulator wieghs quite a bit though, doesn't it?
odpurple is offline   Reply With Quote
Old 03-05-2005, 03:33 PM   #11676
Tech Adept
 
Join Date: Oct 2001
Location: Auckland, New Zealand
Posts: 148
Send a message via ICQ to Seano
Default

Quote:
Originally posted by Greg M
In New Zealand its illegal to run a fibreglass antenna

I'm new to 1/12 and not many people run the class here, to the point that we have only 4 cars entered for our Nationals next weekend and thats not enough to run the class.

There are hundreds of pages to this thread, so don't want to go through the whole thing, so hopefully you can help me out with a few questions.

Why do guys run separate receiver battery packs and what size and capacity are they?

I'm looking at running outdoor on a rough ashpalt track, so am running huge tyres, 55mm in the back. I have 12 doubles or a 17 double, can anyone give me a good roll out to run? Will be running 4 cell 3300's.

Thanks for your help.
Great to see another 1/12th racer in NZ I was going to run mine at the Nats but couldnt find accommodation. More race it up here up to 10 at the most but they don't seem to want to travel

Personally with 4 cell I run a 10x2 with 12deg timing, rollout I couldnt help you with for your track though, was hoping to find that out myself next weekend but never mind

Just out of curiousity who has entered Pro12?
Seano is offline   Reply With Quote
Old 03-05-2005, 05:17 PM   #11677
Tech Elite
 
vtl1180ny's Avatar
R/C Tech Charter Subscriber
 
Join Date: Sep 2003
Location: Wrong Island
Posts: 4,961
Default

Quote:
Originally posted by odpurple
Cool, 8 grams compared to 20 for a nmhd pack is a big savings. I think the regulator wieghs quite a bit though, doesn't it?
I'll weigh the whole setup before I install it in the car and let you know....
__________________
I still lurk....
vtl1180ny is offline   Reply With Quote
Old 03-05-2005, 05:24 PM   #11678
Tech Addict
 
Thraex's Avatar
 
Join Date: Nov 2004
Posts: 518
Default

Quote:
Originally posted by odpurple
Cool, 8 grams compared to 20 for a nmhd pack is a big savings. I think the regulator wieghs quite a bit though, doesn't it?
About the regulator...
Can't you just use A resistor?
It's smaller and more importent it is as light as A feather.
I guess you could use it and make it work quite well, IF the current has A stalbe value, but I think the reciever and servo draw the same current everytime (not like the motor, with accelerating and those things).
__________________
Thijs van M[HPI/HB]
Thraex is offline   Reply With Quote
Old 03-05-2005, 05:55 PM   #11679
Tech Master
 
picco007's Avatar
 
Join Date: Dec 2001
Location: TX.
Posts: 1,748
Trader Rating: 81 (100%+)
Send a message via AIM to picco007 Send a message via Yahoo to picco007
Default

I'm thinking of putting in a gtx or QC2 in my rugrat. Would anyone have advice as to which they would perfer in a 1/12 scale car? I would appreciate any advice.

Thanks
__________________
EA Motorsports
picco007 is offline   Reply With Quote
Old 03-05-2005, 06:09 PM   #11680
Tech Master
 
nmt6789's Avatar
 
Join Date: Jan 2003
Location: Long Island NY
Posts: 1,292
Send a message via AIM to nmt6789
Default

Theyre both good ESC's.... I would go with a QC2
nmt6789 is offline   Reply With Quote
Old 03-05-2005, 06:21 PM   #11681
Tech Master
 
dakrat's Avatar
 
Join Date: Nov 2004
Location: 96th ABW
Posts: 1,581
Default

i been running novak for years and not a single problem with them. i have a gtx and love it. both are great esc i just dont like the fact that u have to buy the capacitor separately with the QC2 and will bring the total of about 190 bucks. poop.
dakrat is offline   Reply With Quote
Old 03-05-2005, 06:25 PM   #11682
Tech Addict
 
Thraex's Avatar
 
Join Date: Nov 2004
Posts: 518
Default

Just buy the Cap. at your local electronics store and you have the same thing (or better) for $2 or even less.
__________________
Thijs van M[HPI/HB]
Thraex is offline   Reply With Quote
Old 03-05-2005, 06:33 PM   #11683
Tech Master
 
dakrat's Avatar
 
Join Date: Nov 2004
Location: 96th ABW
Posts: 1,581
Default

if its only 2 bucks then why not throw it in the box?
dakrat is offline   Reply With Quote
Old 03-05-2005, 06:44 PM   #11684
Tech Addict
 
Thraex's Avatar
 
Join Date: Nov 2004
Posts: 518
Default

Because they want to make A profit.
LRP sells A special kit with 2 caps and A heatsink for $25,--, that's WAAAAAAAAAAY overpriced!
You shouldn't buy that, and if you buy it at your local electronics shop you will also have A better quality most of the time.
__________________
Thijs van M[HPI/HB]
Thraex is offline   Reply With Quote
Old 03-05-2005, 06:55 PM   #11685
Tech Regular
 
rinkrat99's Avatar
 
Join Date: Sep 2003
Location: Colorado
Posts: 420
Send a message via AIM to rinkrat99
Default 12L3 Setup for bumpy asphalt

Does anyone have a setup sheet for Stock or 19t on bumpy asphalt?

Thanks
rinkrat99 is offline   Reply With Quote
Reply

Similar Threads
Thread Thread Starter Forum Replies Last Post
New to the forum mig rod Electric Off-Road 1 01-05-2008 05:23 PM
hi i need help and im new to the forum racer4 Rookie Zone 4 01-21-2007 02:37 PM
Why is this forum listed under the On Road Forum? sport10 Onroad Nitro Engine Zone 0 01-11-2007 08:06 AM
Forum Changes... futureal Wisconsin & Illinois Racing 3 10-28-2002 09:26 PM



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off



All times are GMT -7. It is currently 11:13 PM.


Powered By: vBulletin v3.9.2.1
Privacy Policy | Terms of Use | Advertise Content © 2001-2011 RCTech.net

SEO by vBSEO 3.5.0