R/C Tech Forums

Go Back   R/C Tech Forums > General Forums > Electric On-Road

    Hide Wikipost
Old 10-28-2016, 12:43 PM   -   Wikipost
R/C Tech Forums Thread Wiki: 1/12 forum
Please read: This is a community-maintained wiki post containing the most important information from this thread. You may edit the Wiki once you have been a member for 90 days and have made 90 posts.
 
Last edit by: fenton06
This is a place to share knowledge related to 1/12th scale racing. It is not to be used for conversations.

KITS:
Click links to go to manufacturer product page. If any are missing please add them!

TIRES:
Pre-mounted tires readily available in the US:
Pre-mounted tires readily available in the Europe:
  • Hot Race ??

Gluing your own donuts:
https://www.youtube.com/watch?v=hm7z1rz-74s - Special thanks to Edward Pickering!
Truing tires:
https://www.youtube.com/watch?v=8wqHOLWq6Uc - Special thanks to Edward Pickering!

The following information came from HERE, with some editing and information added. Thanks Christian!

THIS MAY NEED UPDATING FOR THE NEW BLACK CRC CARPET

Brands:
BSR, CRC, Jaco:
Pro One is no longer selling to the public, but it and the brands above are all mounted by BSR and use the same foam. The nomenclature of the BSR vs Jaco/CRC is a little different in a few instances but is otherwise the same. The BSR foam consists of three families, and can be identifed as synthetics, naturals, and blends.

Synthetics - The old school, light weight, easy to true "dry feeling" tires. These include tires like CRC/Jaco Yellow (BSR White), Black, Gray, etc. These tires offer the highest wear rate and lowest grip. Many racers continue to use these nder high bite conditions.

Naturals - These tires are usually the best alternative for low bite and asphalt. They include Pink, Magenta, Double Pink, Lilac (BSR Team Purple), Purple, and other tires. These tires provide a ton of grip, but tend to get sticky in high bite conditions. This rubber does not wear as easily, and the cars will pick up gunk and fibers from the carpet under most high bite conditions. This is especially bad if the humidity is high.

Blends - These are the tires most people run today. They were initially called "JFT foam" by some, as it was believed that the tires were the same as the JFT tires. We can divide the blends further into two groups: high rubber and low rubber content. The high rubber would be the new rear Orange and Red from the BSR family, and the low rubber would be the Green and Blue varieties. When, asked about the difference, John Foister from BSR Tires said they came from the same "family" of foam, but they offered different grip. According to John, the Green/Blue has more bite than Orange/Red, but from track testing Oranges offer more bite than Green (being equivalent to in hardness) when the grip is high and absolutely no grip when it is lower. The Orange foam has a denser pore structure and the tire is not as prone to chunking. It is also important to note is that BSR Blue rears are not the same as the BSR Blue fronts!

JFT:
JFT stands for Japan Foam Tire. They started the new wave of foam tires we are all using now (Blue/Blu, Green/Greene, Dbl Blue, etc). These tires are a little different than the BSR tire family, but work in very similar conditions. They offers four varieties A (asphalt), C (carpet), S (???), and R (???). This does not mean that those types only work on that surface, but this is what they recommend.

JFT uses the same foam for fronts and rears if the color is the same.

A: Used on asphalt, considered close to the natural rubber variety and are named consistently with other natural tires.
C: Used on carpet, considered a blend.
S: Used on carpet?, tires are ???
R: Used on carpet?, tires are ???

For setup, the JFT foam seem to generate more bite than the BSR, therefore the car tends to be a little more aggressive.

Ulti:
Ulti is another Japanese brand that offers an array of compounds. They have their own way of rating tires, and are difficult to equate to other brands. They have 4 different varieties, each in varying degrees of hardness.

J: High rubber content tire, similar to Pink/ Magenta. Soft would be close to a pink. These offer the most bite and are great for asphalt/carpet front tire. (J hard being very popular)
X: "Balanced" blend, similar to JFT Blue/ Green. Soft is equivalent to Green, medium to Blue in hardness. Great for carpet!
Y: High synthetic blend with lower grip, and is not a very popular variety.
Z: A very expensive "special" foam that is supposed to be magic on asphalt. Only make it in soft shore.
European tires:
There are many great European foam tire brands that use their own types of foam, as well as traditional foams. SOmeone with more knowledge about them will need to fill this in!

Tire Diameter:
If you are racing on carpet, you have to evaluate how much grip your track has. If your track is low to medium grip, you can run bigger tires. If you are on higher bite you have to cut them smaller, there is simply no way around it. Bigger tires are needed for asphalt, especially in the rear. The larger tires provide much needed lateral bite.

Carpet (mm):
Low - Medium Bite
Front: 42.0 - 42.5
Rear: 42.5 - 43.00
Medium - High Bite
Front: 40.5 - 41.0
Rear: 41.5 - 42.0
Big Race
Front: 39.5 - 40.0
Rear: 40.5 - 41.0
Asphalt (mm):
Parking Lot
Front: 43.0 - 44.0
Rear: 44.0 - 45.0
Prepped High Bite
Front: 42.0 - 43.0
Rear: 43.0 - 44.0

Tire Saucing:
Most facilities have moved towards odorless traction additives such as SXT. Some of additives evaporate very quickly and some do not. This seems to be something that is also dependent on tire compound and ambient temperature. For example, saucing a Green compound seems like it never dries, especially when tjhe temperature is lower. We have found that wiping the tires off 15 minutes before we go run allows the sauce to cure, which makes the car come in much quicker with Green rears. Blue compounds on the other hand, do fine when wiped off right before hitting the track.

Saucing half front and full rear is a good initial starting point. If the front of the car is too agressive you can sauce les than half, or for a shorter amount of time.
Tire Fuzzing:
In conditions of increasing grip, foam tires will somewtimes get sticky and pick up fuzz and debris from the track. This is highly dependent on the rubber sedan tire that is being run at your local track and the compound/ type of foam you are running on you car. The softer the sedan tire and the harder/higher rubber content in your foam tire, trouble with fuzzing seems more likely to occur.

There are ways to get around fuzzing under most conditions, and usually involves the selection of the correct foam compound. The more fuzz you get, the softer/lower rubber content you want to run.

Examples:
Problem: Car fuzzes with Lilac/Team Purple fronts and car starts pushing.
Solution: Use a softer front tire and or different family of foam. Replace it with Blue or Double Blue front.

Problem: Car loses rear bite 6 minutes into the run. Blue rear tires look almost clean but have small carpet hairs.
Solution: Use Green rear tires. The softer compound wears instead of getting sticky, minimizing fuzz.

Tire Selection:
Starting out, pick 2 tire compounds for the front and rear. The following should have you covered 99% of the time.

Front - Green and Blue (BSR) or Green and Light Blue (JFT)
Rear - Blue and Double Blue (BSR) or Blue and Dark Blue (JFT)

You may wonder about other compounds out there and if they might be better, trust me, they probably won't be. Even if there are other tires that can be as fast, the synthetic family wears out really fast and the high natural rubber will probably fuzz on you over an 8 minute run. The blends family seems to be the most versatile foam type available today. They last awhile, and sticking to them will make your process of tire selection simpler.
Tire Charts:
BSR/CRC/Jaco



Contact



Corally



JFT (Japan Foam Tire)



Ulti



Enneti (Xceed)



ELECTRONICS:
ESC:
As of now, ROAR is staying 1S (3.7V nominal; 4.2V fully charged) for 1/12. There are many 1S ESC's with a built in BEC so nothing else is required to power the receiver and servo.

If you don't want to lock yourself into a 1S specific ESC, you do have other options! It is possible to use your 2S ESC without a booster or receiver pack, and the ESC simply supplies the lower voltage. If that does not appeal to you, you will need to use an Rx pack or booster. The Rx pack and booster will both supply the receiver with a higher voltage than the 1S pack.

If you decide to use an Rx pack, MAKE SURE TO REMOVE THE RED WIRE FROM THE ESC PLUG THAT GOES INTO THE RECEIVER!!!

If you choose to use a voltage booster, it works exactly how it sounds. Instead of plugging the ESC into the receiver, it plugs into the booster, and the booster plug goes to the ESC, supplying the higher voltage.

1S ESC:
If there are any missing please add them!!

If anyone would like a need for a chart comparing the ESC's specs PM fenton06 and I'll get one made and put in here!
Voltage Boosters:
If there are any missing please add them!
Servos:
BODIES:
Black Art (CRC - US Dist):
  • Audi R8C - BA002 - .020 Thick



  • Black Market (Mohawk 12) - BA005 - .020



  • Lola B10 - BA006 - .020 thick
  • Toyota TS030 - BA008 - .020 thick

    Lola - black/red, TS030 - green/pink


PROTOForm:

Reflex Racing/RSD:

SUSPENSION ADJUSTMENTS:

Print Wikipost

Reply
 
Thread Tools Search this Thread
Old 01-18-2005, 11:30 AM   #10321
Tech Champion
 
rayhuang's Avatar
 
Join Date: Dec 2001
Location: Cleveland Heights, Ohio
Posts: 6,511
Trader Rating: 5 (100%+)
Send a message via AIM to rayhuang
Default

OK-0.5mm between the pills and 8 different heights!! $9.50

Ride height Adjusters
rayhuang is offline   Reply With Quote
Old 01-18-2005, 11:38 AM   #10322
Tech Regular
 
WVRACER's Avatar
 
Join Date: May 2002
Location: SCOTT DEPOT WV
Posts: 491
Send a message via AIM to WVRACER
Default

http://www.teamirsrc.com/podplates.html#rideheight

WVRACER is offline   Reply With Quote
Old 01-18-2005, 11:42 AM   #10323
Tech Master
 
JamesArluck's Avatar
 
Join Date: Jul 2003
Posts: 1,232
Trader Rating: 52 (100%+)
Send a message via AIM to JamesArluck
Default Re: Greatest advancement in 12th scale!!!

Quote:
Originally posted by rayhuang
Hey all-I just saw possibly the best thing to happen to 12th scale since I have been in the hobby. IRS has produced an entire package of rear bearing/ride height adjusters in very small increments!! Now you can run your tires 2 or 3x and chnage pills and be right back to where you were. No more having to run your big tires WAY down to make it to the next pill.

I will post links if I find them-but I am sure an e-mail to Dave at Irrgang will be enough. I think they are alreday available!! They looks like a stiffer material than the AE ones too-so the bearing/axle should spin longer.

Ray
http://www.teamirsrc.com/podplates.html#rideheight
JamesArluck is offline   Reply With Quote
Old 01-18-2005, 11:43 AM   #10324
Tech Master
 
chicky03's Avatar
 
Join Date: Mar 2002
Posts: 1,938
Trader Rating: 1 (100%+)
Send a message via AIM to chicky03
Thumbs up

The new ride height adjusters are awsome. No reaming needed and the bearings spin forever.

Paul
__________________
Serpent America, Picco, Blitz Bodies, Team Titan, Desoto Racing, LRP, Motiv, J Concepts, Nitro Pro fuel, PT RC Racing Oils, TQ Wire(best wire ever!), BSR tires, Arrowmax, Xceed, Sanwa.
chicky03 is offline   Reply With Quote
Old 01-18-2005, 11:45 AM   #10325
Tech Regular
 
WVRACER's Avatar
 
Join Date: May 2002
Location: SCOTT DEPOT WV
Posts: 491
Send a message via AIM to WVRACER
Default

ok incase you missed the link its right here j/k
WVRACER is offline   Reply With Quote
Old 01-18-2005, 11:45 AM   #10326
Tech Addict
 
Tim Stamper's Avatar
 
Join Date: Nov 2003
Location: Redford, Mi.
Posts: 591
Default Re: Greatest advancement in 12th scale!!!

Nice. Definately something to add to my collection.

Tim
__________________
This space for rent
Tim Stamper is offline   Reply With Quote
Old 01-18-2005, 11:47 AM   #10327
Tech Regular
 
johnnywhopper's Avatar
 
Join Date: Apr 2003
Location: Rome, NY
Posts: 371
Default

i have been using these for a couple weeks now, and they are BY FAR a much better fit right off the mold. Better bearing fit, better pod plate fit, and of course having the smaller increments of adjustment is absolutely dialed!


John
__________________
Team CRC, Spektrum, Hobbywing, JDJ Vinyl Graphics, Moby Graphix, Black Art, Power Push
johnnywhopper is offline   Reply With Quote
Old 01-18-2005, 11:48 AM   #10328
Tech Champion
 
rayhuang's Avatar
 
Join Date: Dec 2001
Location: Cleveland Heights, Ohio
Posts: 6,511
Trader Rating: 5 (100%+)
Send a message via AIM to rayhuang
Default

I am getting a couple sets because i KNOW people will be borrowing them left and right. Always do.

Ray
p.s. Yeah-I know-the answer should be "buy your own".
rayhuang is offline   Reply With Quote
Old 01-18-2005, 01:15 PM   #10329
P2
Tech Fanatic
 
P2's Avatar
 
Join Date: Aug 2003
Location: Oahu, Hi
Posts: 865
Trader Rating: 15 (100%+)
Default

Quote:
Originally posted by rayhuang
I am getting a couple sets because i KNOW people will be borrowing them left and right. Always do.

Ray
p.s. Yeah-I know-the answer should be "buy your own".
I just ordered another set for the same reason, these things are great! I'm sure every 12th scaler will eventually buy a set.
__________________
TopRacingUSA | Team EPIC | Thunder Power | OD Racing
P2 is offline   Reply With Quote
Old 01-18-2005, 01:21 PM   #10330
Tech Elite
 
litespeed-dom's Avatar
 
Join Date: Oct 2002
Location: Beaverton, Oregon
Posts: 3,990
Trader Rating: 4 (100%+)
Default IRS RIDE HEIGHT ADJUSTERS

Well, I used them over the weekend and I can't say they are awesome. The size of them are smaller than AE so they are actually moving inside your pods, might want to keep an eye on that. Bearing fitment is fine, but pod plate fitment is absolute junk.

dom
__________________
Team Kyosho America - Team Br00d Racing - Team R/C Plus - GQ Racing Tyres - Slapmaster Tools - FSX Racing
litespeed-dom is offline   Reply With Quote
Old 01-18-2005, 01:25 PM   #10331
Tech Champion
 
rayhuang's Avatar
 
Join Date: Dec 2001
Location: Cleveland Heights, Ohio
Posts: 6,511
Trader Rating: 5 (100%+)
Send a message via AIM to rayhuang
Default Re: IRS RIDE HEIGHT ADJUSTERS

Quote:
Originally posted by litespeed-dom
Well, I used them over the weekend and I can't say they are awesome. The size of them are smaller than AE so they are actually moving inside your pods, might want to keep an eye on that. Bearing fitment is fine, but pod plate fitment is absolute junk.

dom
I have some AE adjusters that are very dremeled to fit very free, but they are now very old and wobble like that. I run a very thin , very narrow piece of strapping tape in the pocket of the bulkhead and it stays snug, but doesnt bind the axle at all.
rayhuang is offline   Reply With Quote
Old 01-18-2005, 02:15 PM   #10332
Tech Fanatic
 
Join Date: Mar 2002
Location: Indianapolis, IN
Posts: 864
Default

Dom - let me suggest to place a small dab of CA on the flange of the adjuster where it fits into the pod plate. When the CA sets up, the adjuster should be a solid fit. And all you have to do to remove the adjuster is pop it out by placing your thumb on the inside of the pod plate against the adjuster and push. Good luck and good racing.
davidl is offline   Reply With Quote
Old 01-18-2005, 02:17 PM   #10333
Tech Regular
 
johnnywhopper's Avatar
 
Join Date: Apr 2003
Location: Rome, NY
Posts: 371
Default Re: IRS RIDE HEIGHT ADJUSTERS

Quote:
Originally posted by litespeed-dom
Well, I used them over the weekend and I can't say they are awesome. The size of them are smaller than AE so they are actually moving inside your pods, might want to keep an eye on that. Bearing fitment is fine, but pod plate fitment is absolute junk.

dom
i had the same problem with the set of pod plates that are on my car. so i tried them in about 12 other sets of new pods, and they were perfect in every one. i think the pod plates are actually stretching a bit over time from bangin the walls down.

try them in a new set of pod plates and see if they're still "junk".


John
__________________
Team CRC, Spektrum, Hobbywing, JDJ Vinyl Graphics, Moby Graphix, Black Art, Power Push
johnnywhopper is offline   Reply With Quote
Old 01-18-2005, 02:38 PM   #10334
Tech Apprentice
 
Join Date: Oct 2004
Posts: 91
Default What have I done wrong?

I got some front tires for my car and when I put them on something in the suspension is binding on the wheel. Can you guys see anything here that I have done wrong? Please don't let it be something too dumb.




SteveB is offline   Reply With Quote
Old 01-18-2005, 03:08 PM   #10335
Tech Elite
 
litespeed-dom's Avatar
 
Join Date: Oct 2002
Location: Beaverton, Oregon
Posts: 3,990
Trader Rating: 4 (100%+)
Default

Thanks for the adjuster advice guys. I did try them on another set of pod plates and another set of brand new pod plates. They still have play in them. I guess the CA trick might be a good idea though.

Dom
__________________
Team Kyosho America - Team Br00d Racing - Team R/C Plus - GQ Racing Tyres - Slapmaster Tools - FSX Racing
litespeed-dom is offline   Reply With Quote
Reply

Similar Threads
Thread Thread Starter Forum Replies Last Post
New to the forum mig rod Electric Off-Road 1 01-05-2008 05:23 PM
hi i need help and im new to the forum racer4 Rookie Zone 4 01-21-2007 02:37 PM
Why is this forum listed under the On Road Forum? sport10 Onroad Nitro Engine Zone 0 01-11-2007 08:06 AM
Forum Changes... futureal Wisconsin & Illinois Racing 3 10-28-2002 09:26 PM



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off



All times are GMT -7. It is currently 08:34 AM.


Powered By: vBulletin v3.9.2.1
Privacy Policy | Terms of Use | Advertise Content © 2001-2011 RCTech.net

SEO by vBSEO 3.5.0