R/C Tech Forums

Go Back   R/C Tech Forums > General Forums > Electric On-Road

    Hide Wikipost
Old 10-28-2016, 12:43 PM   -   Wikipost
R/C Tech Forums Thread Wiki: 1/12 forum
Please read: This is a community-maintained wiki post containing the most important information from this thread. You may edit the Wiki once you have been a member for 90 days and have made 90 posts.
 
Last edit by: fenton06
This is a place to share knowledge related to 1/12th scale racing. It is not to be used for conversations.

KITS:
Click links to go to manufacturer product page. If any are missing please add them!

TIRES:
Pre-mounted tires readily available in the US:
Pre-mounted tires readily available in the Europe:
  • Hot Race ??

Gluing your own donuts:
https://www.youtube.com/watch?v=hm7z1rz-74s - Special thanks to Edward Pickering!
Truing tires:
https://www.youtube.com/watch?v=8wqHOLWq6Uc - Special thanks to Edward Pickering!

The following information came from HERE, with some editing and information added. Thanks Christian!

THIS MAY NEED UPDATING FOR THE NEW BLACK CRC CARPET

Brands:
BSR, CRC, Jaco:
Pro One is no longer selling to the public, but it and the brands above are all mounted by BSR and use the same foam. The nomenclature of the BSR vs Jaco/CRC is a little different in a few instances but is otherwise the same. The BSR foam consists of three families, and can be identifed as synthetics, naturals, and blends.

Synthetics - The old school, light weight, easy to true "dry feeling" tires. These include tires like CRC/Jaco Yellow (BSR White), Black, Gray, etc. These tires offer the highest wear rate and lowest grip. Many racers continue to use these nder high bite conditions.

Naturals - These tires are usually the best alternative for low bite and asphalt. They include Pink, Magenta, Double Pink, Lilac (BSR Team Purple), Purple, and other tires. These tires provide a ton of grip, but tend to get sticky in high bite conditions. This rubber does not wear as easily, and the cars will pick up gunk and fibers from the carpet under most high bite conditions. This is especially bad if the humidity is high.

Blends - These are the tires most people run today. They were initially called "JFT foam" by some, as it was believed that the tires were the same as the JFT tires. We can divide the blends further into two groups: high rubber and low rubber content. The high rubber would be the new rear Orange and Red from the BSR family, and the low rubber would be the Green and Blue varieties. When, asked about the difference, John Foister from BSR Tires said they came from the same "family" of foam, but they offered different grip. According to John, the Green/Blue has more bite than Orange/Red, but from track testing Oranges offer more bite than Green (being equivalent to in hardness) when the grip is high and absolutely no grip when it is lower. The Orange foam has a denser pore structure and the tire is not as prone to chunking. It is also important to note is that BSR Blue rears are not the same as the BSR Blue fronts!

JFT:
JFT stands for Japan Foam Tire. They started the new wave of foam tires we are all using now (Blue/Blu, Green/Greene, Dbl Blue, etc). These tires are a little different than the BSR tire family, but work in very similar conditions. They offers four varieties A (asphalt), C (carpet), S (???), and R (???). This does not mean that those types only work on that surface, but this is what they recommend.

JFT uses the same foam for fronts and rears if the color is the same.

A: Used on asphalt, considered close to the natural rubber variety and are named consistently with other natural tires.
C: Used on carpet, considered a blend.
S: Used on carpet?, tires are ???
R: Used on carpet?, tires are ???

For setup, the JFT foam seem to generate more bite than the BSR, therefore the car tends to be a little more aggressive.

Ulti:
Ulti is another Japanese brand that offers an array of compounds. They have their own way of rating tires, and are difficult to equate to other brands. They have 4 different varieties, each in varying degrees of hardness.

J: High rubber content tire, similar to Pink/ Magenta. Soft would be close to a pink. These offer the most bite and are great for asphalt/carpet front tire. (J hard being very popular)
X: "Balanced" blend, similar to JFT Blue/ Green. Soft is equivalent to Green, medium to Blue in hardness. Great for carpet!
Y: High synthetic blend with lower grip, and is not a very popular variety.
Z: A very expensive "special" foam that is supposed to be magic on asphalt. Only make it in soft shore.
European tires:
There are many great European foam tire brands that use their own types of foam, as well as traditional foams. SOmeone with more knowledge about them will need to fill this in!

Tire Diameter:
If you are racing on carpet, you have to evaluate how much grip your track has. If your track is low to medium grip, you can run bigger tires. If you are on higher bite you have to cut them smaller, there is simply no way around it. Bigger tires are needed for asphalt, especially in the rear. The larger tires provide much needed lateral bite.

Carpet (mm):
Low - Medium Bite
Front: 42.0 - 42.5
Rear: 42.5 - 43.00
Medium - High Bite
Front: 40.5 - 41.0
Rear: 41.5 - 42.0
Big Race
Front: 39.5 - 40.0
Rear: 40.5 - 41.0
Asphalt (mm):
Parking Lot
Front: 43.0 - 44.0
Rear: 44.0 - 45.0
Prepped High Bite
Front: 42.0 - 43.0
Rear: 43.0 - 44.0

Tire Saucing:
Most facilities have moved towards odorless traction additives such as SXT. Some of additives evaporate very quickly and some do not. This seems to be something that is also dependent on tire compound and ambient temperature. For example, saucing a Green compound seems like it never dries, especially when tjhe temperature is lower. We have found that wiping the tires off 15 minutes before we go run allows the sauce to cure, which makes the car come in much quicker with Green rears. Blue compounds on the other hand, do fine when wiped off right before hitting the track.

Saucing half front and full rear is a good initial starting point. If the front of the car is too agressive you can sauce les than half, or for a shorter amount of time.
Tire Fuzzing:
In conditions of increasing grip, foam tires will somewtimes get sticky and pick up fuzz and debris from the track. This is highly dependent on the rubber sedan tire that is being run at your local track and the compound/ type of foam you are running on you car. The softer the sedan tire and the harder/higher rubber content in your foam tire, trouble with fuzzing seems more likely to occur.

There are ways to get around fuzzing under most conditions, and usually involves the selection of the correct foam compound. The more fuzz you get, the softer/lower rubber content you want to run.

Examples:
Problem: Car fuzzes with Lilac/Team Purple fronts and car starts pushing.
Solution: Use a softer front tire and or different family of foam. Replace it with Blue or Double Blue front.

Problem: Car loses rear bite 6 minutes into the run. Blue rear tires look almost clean but have small carpet hairs.
Solution: Use Green rear tires. The softer compound wears instead of getting sticky, minimizing fuzz.

Tire Selection:
Starting out, pick 2 tire compounds for the front and rear. The following should have you covered 99% of the time.

Front - Green and Blue (BSR) or Green and Light Blue (JFT)
Rear - Blue and Double Blue (BSR) or Blue and Dark Blue (JFT)

You may wonder about other compounds out there and if they might be better, trust me, they probably won't be. Even if there are other tires that can be as fast, the synthetic family wears out really fast and the high natural rubber will probably fuzz on you over an 8 minute run. The blends family seems to be the most versatile foam type available today. They last awhile, and sticking to them will make your process of tire selection simpler.
Tire Charts:
BSR/CRC/Jaco



Contact



Corally



JFT (Japan Foam Tire)



Ulti



Enneti (Xceed)



ELECTRONICS:
ESC:
As of now, ROAR is staying 1S (3.7V nominal; 4.2V fully charged) for 1/12. There are many 1S ESC's with a built in BEC so nothing else is required to power the receiver and servo.

If you don't want to lock yourself into a 1S specific ESC, you do have other options! It is possible to use your 2S ESC without a booster or receiver pack, and the ESC simply supplies the lower voltage. If that does not appeal to you, you will need to use an Rx pack or booster. The Rx pack and booster will both supply the receiver with a higher voltage than the 1S pack.

If you decide to use an Rx pack, MAKE SURE TO REMOVE THE RED WIRE FROM THE ESC PLUG THAT GOES INTO THE RECEIVER!!!

If you choose to use a voltage booster, it works exactly how it sounds. Instead of plugging the ESC into the receiver, it plugs into the booster, and the booster plug goes to the ESC, supplying the higher voltage.

1S ESC:
If there are any missing please add them!!

If anyone would like a need for a chart comparing the ESC's specs PM fenton06 and I'll get one made and put in here!
Voltage Boosters:
If there are any missing please add them!
Servos:
BODIES:
Black Art (CRC - US Dist):
  • Audi R8C - BA002 - .020 Thick



  • Black Market (Mohawk 12) - BA005 - .020



  • Lola B10 - BA006 - .020 thick
  • Toyota TS030 - BA008 - .020 thick

    Lola - black/red, TS030 - green/pink


PROTOForm:

Reflex Racing/RSD:

SUSPENSION ADJUSTMENTS:

Print Wikipost

Reply
 
Thread Tools Search this Thread
Old 12-01-2004, 02:56 PM   #9541
Tech Elite
 
litespeed-dom's Avatar
 
Join Date: Oct 2002
Location: Beaverton, Oregon
Posts: 3,990
Trader Rating: 4 (100%+)
Default Part# for L4 front end

Quote:
Originally posted by wesb_65
Hey Dom
Here are the P/N's you need
4564 Cross Brace, Graphite
4561 Upper Suspension Mount 0, 5, and 10 degree
4569 Hinge Pin, Titanium with castor shims
You will also need 3862 5-40x1/8" Set Screws

Wes B
Coastaltony, Here you go, courtesy of Wes B!

Dom
__________________
Team Kyosho America - Team Br00d Racing - Team R/C Plus - GQ Racing Tyres - Slapmaster Tools - FSX Racing
litespeed-dom is offline   Reply With Quote
Old 12-01-2004, 03:32 PM   #9542
Tech Elite
 
J.Gonzalez's Avatar
 
Join Date: Nov 2002
Location: connecticut
Posts: 2,409
Trader Rating: 16 (100%+)
Default HARA HAMMER 12

CHECK IT OUT IN THE FOR SALE SECTION...TAKING OFFERS.
J.Gonzalez is offline   Reply With Quote
Old 12-01-2004, 03:36 PM   #9543
Tech Apprentice
 
Join Date: Dec 2003
Location: UK
Posts: 92
Trader Rating: 1 (100%+)
Default

Quote:
Originally posted by reynard55
Did anybody get pictures of the new prototype front end on Josh's winning C12 at Cleveland?
Josh's quote from the CEFX website forum-

It wasn't a 12L4 front end. I will admit that it was a prototype front end that is a direct fit onto our current chassis. Designing cars for everyone is extremely difficult as to win top level races I need the car to be so aggressive that it will traction roll in every corner - this is way too much for club racers and people wanting to enjoy 1/12. I made this to get myself back up on the mark in 1/12 and to gain the feel back.... We are going to continue to test and develop a new C12 front end that will direct fit on out current chassis. I now have both extremes to work from - extremely aggressive prototype and our extremely easy to drive and stable production. I hope to learn more about both to produce something that will be as fast lap time wise as well as comfortable to drive. This will take a while as I want to do loads of testing to make sure I can deliver the most complete front end to our customers.
reynard55 is offline   Reply With Quote
Old 12-01-2004, 08:08 PM   #9544
Tech Apprentice
 
Jay Boyd's Avatar
 
Join Date: Jan 2004
Location: Canada
Posts: 95
Default

AE pros,when you guys run the Rockey City links are you spacing the top arm mounts out(closer to center) so you can have longer upper a-arms?What + effects does this mod have?
Thanks to Barry Baker for letting me take some pics of his rides.
Attached Images
File Type: jpg 110-1007_img.jpg (138.5 KB, 346 views)
Jay Boyd is offline   Reply With Quote
Old 12-01-2004, 08:50 PM   #9545
Tech Master
 
JamesArluck's Avatar
 
Join Date: Jul 2003
Posts: 1,232
Trader Rating: 52 (100%+)
Send a message via AIM to JamesArluck
Default Jaco Two-Stage Tires

Does anyone have any info on these?

-James
JamesArluck is offline   Reply With Quote
Old 12-01-2004, 09:35 PM   #9546
Tech Elite
 
Taz_S's Avatar
 
Join Date: Aug 2001
Location: Santa Rosa CA
Posts: 2,551
Trader Rating: 4 (100%+)
Default

Quote:
Originally posted by litespeed-dom
It's funny that 1/12th is pretty big this winter. Us being mainly an 1/8th gas club ran 1/12th Mod in winter for training purpose. Just a couple of years ago, the sedan people were tell us 1/12th is dead, but look now! Due to cost, we're spec'ing 1/12th class to spec 19T only. But it's pretty amazing to see all these manufacturers coming out with new cars this year...

Slapmaster MS2.2
AE RC12l4
Speed Merchant Rev4
Calandra 3.2R
Calandra T-Force
PRC Quad12
BMI 1/12th
CEFX C12

All are new cars within the last 13 months or so.

Actually during our last Sat club race, 1/12th 19T was the biggest class.

Dom
Slapmaster MS2.2?
__________________
Jake's Performance Hobbies http://www.jphracing.com/
https://www.facebook.com/groups/757500284356171 Facebook Group for Pro 10
Taz_S is offline   Reply With Quote
Old 12-01-2004, 10:59 PM   #9547
Tech Elite
 
fatdoggy's Avatar
R/C Tech Charter Subscriber
 
Join Date: Aug 2001
Location: MD USA
Posts: 3,642
Default

Quote:
Originally posted by Taz_S
Slapmaster MS2.2?
SLAPMASTER - 1/12th MS2.2
fatdoggy is offline   Reply With Quote
Old 12-02-2004, 06:56 AM   #9548
sg1
Tech Elite
 
sg1's Avatar
 
Join Date: Aug 2004
Location: Ohio
Posts: 2,777
Trader Rating: 79 (100%+)
Default

Jay Boyd...

There is no difference in spacing, the top a-arm is the same length, unless you want to try it longer. The only reason I tried them is that the ball fits snugger, alot less slop, turnbuckle fits tighter, and it's smoother.

Wayne
__________________
**Team Scream**Parma/PSE**TQ Wire**Roche**Pemberton**BSR**Graupner/GM**SXT**
sg1 is offline   Reply With Quote
Old 12-02-2004, 08:14 AM   #9549
Tech Elite
 
coastaltony's Avatar
 
Join Date: Sep 2001
Location: Palm Beach, Fl
Posts: 2,585
Trader Rating: 13 (100%+)
Default

Thanks for the help guys
__________________
Meucci pool cue collector
coastaltony is offline   Reply With Quote
Old 12-02-2004, 10:24 AM   #9550
Tech Master
 
Tempest2000's Avatar
 
Join Date: Aug 2003
Location: Smyrna, TN
Posts: 1,592
Trader Rating: 21 (100%+)
Default

wayne,

where can you find those rocket city links???

thanks

michael
Tempest2000 is offline   Reply With Quote
Old 12-02-2004, 10:35 AM   #9551
sg1
Tech Elite
 
sg1's Avatar
 
Join Date: Aug 2004
Location: Ohio
Posts: 2,777
Trader Rating: 79 (100%+)
Default

Micheal...
I may have a bunch of them.. I'll look tonight. I got them from our local track, "The Gate".... maybe go over to hobby talk and make a posting in the onroad section under Cleveland style at the gate and "Beans my Hero" (Jimmy) can help you. He runs the hobbyshop there.

Wayne
__________________
**Team Scream**Parma/PSE**TQ Wire**Roche**Pemberton**BSR**Graupner/GM**SXT**
sg1 is offline   Reply With Quote
Old 12-02-2004, 10:42 AM   #9552
Tech Master
 
Tempest2000's Avatar
 
Join Date: Aug 2003
Location: Smyrna, TN
Posts: 1,592
Trader Rating: 21 (100%+)
Default

cool thanks... I didn't know if they are distributed under a different name or what? like something I could order from horizon or somebody...

thanks
Tempest2000 is offline   Reply With Quote
Old 12-02-2004, 10:45 AM   #9553
Tech Elite
 
litespeed-dom's Avatar
 
Join Date: Oct 2002
Location: Beaverton, Oregon
Posts: 3,990
Trader Rating: 4 (100%+)
Default The Gate

Wayne,

Is there a ph# for the track or for "Jimmy"

thanks,
Dom
__________________
Team Kyosho America - Team Br00d Racing - Team R/C Plus - GQ Racing Tyres - Slapmaster Tools - FSX Racing
litespeed-dom is offline   Reply With Quote
Old 12-02-2004, 11:35 AM   #9554
sg1
Tech Elite
 
sg1's Avatar
 
Join Date: Aug 2004
Location: Ohio
Posts: 2,777
Trader Rating: 79 (100%+)
Default ball ends

I don't know the number there I tried locating them once before and had no luck. If you guys want I can see if he has them then get them out to you. They are too long so you have to trim them down, the hole for the turnbuckle is too small (4-40) and they take an RPM delrin ball. Last I saw they had the balls and ends at The Gate. Send me a PM if you're interested and I'll check it out

Wayne
__________________
**Team Scream**Parma/PSE**TQ Wire**Roche**Pemberton**BSR**Graupner/GM**SXT**
sg1 is offline   Reply With Quote
Old 12-02-2004, 12:07 PM   #9555
Tech Elite
 
litespeed-dom's Avatar
 
Join Date: Oct 2002
Location: Beaverton, Oregon
Posts: 3,990
Trader Rating: 4 (100%+)
Default

Wayne,

You have PM.

thanks,
Dom
__________________
Team Kyosho America - Team Br00d Racing - Team R/C Plus - GQ Racing Tyres - Slapmaster Tools - FSX Racing
litespeed-dom is offline   Reply With Quote
Reply

Similar Threads
Thread Thread Starter Forum Replies Last Post
New to the forum mig rod Electric Off-Road 1 01-05-2008 05:23 PM
hi i need help and im new to the forum racer4 Rookie Zone 4 01-21-2007 02:37 PM
Why is this forum listed under the On Road Forum? sport10 Onroad Nitro Engine Zone 0 01-11-2007 08:06 AM
Forum Changes... futureal Wisconsin & Illinois Racing 3 10-28-2002 09:26 PM



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off



All times are GMT -7. It is currently 04:36 AM.


Powered By: vBulletin v3.9.2.1
Privacy Policy | Terms of Use | Advertise Content © 2001-2011 RCTech.net

SEO by vBSEO 3.5.0