R/C Tech Forums

Go Back   R/C Tech Forums > General Forums > Electric On-Road

    Hide Wikipost
Old 10-28-2016, 12:43 PM   -   Wikipost
R/C Tech Forums Thread Wiki: 1/12 forum
Please read: This is a community-maintained wiki post containing the most important information from this thread. You may edit the Wiki once you have been a member for 90 days and have made 90 posts.
 
Last edit by: fenton06
This is a place to share knowledge related to 1/12th scale racing. It is not to be used for conversations.

KITS:
Click links to go to manufacturer product page. If any are missing please add them!

TIRES:
Pre-mounted tires readily available in the US:
Pre-mounted tires readily available in the Europe:
  • Hot Race ??

Gluing your own donuts:
https://www.youtube.com/watch?v=hm7z1rz-74s - Special thanks to Edward Pickering!
Truing tires:
https://www.youtube.com/watch?v=8wqHOLWq6Uc - Special thanks to Edward Pickering!

The following information came from HERE, with some editing and information added. Thanks Christian!

THIS MAY NEED UPDATING FOR THE NEW BLACK CRC CARPET

Brands:
BSR, CRC, Jaco:
Pro One is no longer selling to the public, but it and the brands above are all mounted by BSR and use the same foam. The nomenclature of the BSR vs Jaco/CRC is a little different in a few instances but is otherwise the same. The BSR foam consists of three families, and can be identifed as synthetics, naturals, and blends.

Synthetics - The old school, light weight, easy to true "dry feeling" tires. These include tires like CRC/Jaco Yellow (BSR White), Black, Gray, etc. These tires offer the highest wear rate and lowest grip. Many racers continue to use these nder high bite conditions.

Naturals - These tires are usually the best alternative for low bite and asphalt. They include Pink, Magenta, Double Pink, Lilac (BSR Team Purple), Purple, and other tires. These tires provide a ton of grip, but tend to get sticky in high bite conditions. This rubber does not wear as easily, and the cars will pick up gunk and fibers from the carpet under most high bite conditions. This is especially bad if the humidity is high.

Blends - These are the tires most people run today. They were initially called "JFT foam" by some, as it was believed that the tires were the same as the JFT tires. We can divide the blends further into two groups: high rubber and low rubber content. The high rubber would be the new rear Orange and Red from the BSR family, and the low rubber would be the Green and Blue varieties. When, asked about the difference, John Foister from BSR Tires said they came from the same "family" of foam, but they offered different grip. According to John, the Green/Blue has more bite than Orange/Red, but from track testing Oranges offer more bite than Green (being equivalent to in hardness) when the grip is high and absolutely no grip when it is lower. The Orange foam has a denser pore structure and the tire is not as prone to chunking. It is also important to note is that BSR Blue rears are not the same as the BSR Blue fronts!

JFT:
JFT stands for Japan Foam Tire. They started the new wave of foam tires we are all using now (Blue/Blu, Green/Greene, Dbl Blue, etc). These tires are a little different than the BSR tire family, but work in very similar conditions. They offers four varieties A (asphalt), C (carpet), S (???), and R (???). This does not mean that those types only work on that surface, but this is what they recommend.

JFT uses the same foam for fronts and rears if the color is the same.

A: Used on asphalt, considered close to the natural rubber variety and are named consistently with other natural tires.
C: Used on carpet, considered a blend.
S: Used on carpet?, tires are ???
R: Used on carpet?, tires are ???

For setup, the JFT foam seem to generate more bite than the BSR, therefore the car tends to be a little more aggressive.

Ulti:
Ulti is another Japanese brand that offers an array of compounds. They have their own way of rating tires, and are difficult to equate to other brands. They have 4 different varieties, each in varying degrees of hardness.

J: High rubber content tire, similar to Pink/ Magenta. Soft would be close to a pink. These offer the most bite and are great for asphalt/carpet front tire. (J hard being very popular)
X: "Balanced" blend, similar to JFT Blue/ Green. Soft is equivalent to Green, medium to Blue in hardness. Great for carpet!
Y: High synthetic blend with lower grip, and is not a very popular variety.
Z: A very expensive "special" foam that is supposed to be magic on asphalt. Only make it in soft shore.
European tires:
There are many great European foam tire brands that use their own types of foam, as well as traditional foams. SOmeone with more knowledge about them will need to fill this in!

Tire Diameter:
If you are racing on carpet, you have to evaluate how much grip your track has. If your track is low to medium grip, you can run bigger tires. If you are on higher bite you have to cut them smaller, there is simply no way around it. Bigger tires are needed for asphalt, especially in the rear. The larger tires provide much needed lateral bite.

Carpet (mm):
Low - Medium Bite
Front: 42.0 - 42.5
Rear: 42.5 - 43.00
Medium - High Bite
Front: 40.5 - 41.0
Rear: 41.5 - 42.0
Big Race
Front: 39.5 - 40.0
Rear: 40.5 - 41.0
Asphalt (mm):
Parking Lot
Front: 43.0 - 44.0
Rear: 44.0 - 45.0
Prepped High Bite
Front: 42.0 - 43.0
Rear: 43.0 - 44.0

Tire Saucing:
Most facilities have moved towards odorless traction additives such as SXT. Some of additives evaporate very quickly and some do not. This seems to be something that is also dependent on tire compound and ambient temperature. For example, saucing a Green compound seems like it never dries, especially when tjhe temperature is lower. We have found that wiping the tires off 15 minutes before we go run allows the sauce to cure, which makes the car come in much quicker with Green rears. Blue compounds on the other hand, do fine when wiped off right before hitting the track.

Saucing half front and full rear is a good initial starting point. If the front of the car is too agressive you can sauce les than half, or for a shorter amount of time.
Tire Fuzzing:
In conditions of increasing grip, foam tires will somewtimes get sticky and pick up fuzz and debris from the track. This is highly dependent on the rubber sedan tire that is being run at your local track and the compound/ type of foam you are running on you car. The softer the sedan tire and the harder/higher rubber content in your foam tire, trouble with fuzzing seems more likely to occur.

There are ways to get around fuzzing under most conditions, and usually involves the selection of the correct foam compound. The more fuzz you get, the softer/lower rubber content you want to run.

Examples:
Problem: Car fuzzes with Lilac/Team Purple fronts and car starts pushing.
Solution: Use a softer front tire and or different family of foam. Replace it with Blue or Double Blue front.

Problem: Car loses rear bite 6 minutes into the run. Blue rear tires look almost clean but have small carpet hairs.
Solution: Use Green rear tires. The softer compound wears instead of getting sticky, minimizing fuzz.

Tire Selection:
Starting out, pick 2 tire compounds for the front and rear. The following should have you covered 99% of the time.

Front - Green and Blue (BSR) or Green and Light Blue (JFT)
Rear - Blue and Double Blue (BSR) or Blue and Dark Blue (JFT)

You may wonder about other compounds out there and if they might be better, trust me, they probably won't be. Even if there are other tires that can be as fast, the synthetic family wears out really fast and the high natural rubber will probably fuzz on you over an 8 minute run. The blends family seems to be the most versatile foam type available today. They last awhile, and sticking to them will make your process of tire selection simpler.
Tire Charts:
BSR/CRC/Jaco



Contact



Corally



JFT (Japan Foam Tire)



Ulti



Enneti (Xceed)



ELECTRONICS:
ESC:
As of now, ROAR is staying 1S (3.7V nominal; 4.2V fully charged) for 1/12. There are many 1S ESC's with a built in BEC so nothing else is required to power the receiver and servo.

If you don't want to lock yourself into a 1S specific ESC, you do have other options! It is possible to use your 2S ESC without a booster or receiver pack, and the ESC simply supplies the lower voltage. If that does not appeal to you, you will need to use an Rx pack or booster. The Rx pack and booster will both supply the receiver with a higher voltage than the 1S pack.

If you decide to use an Rx pack, MAKE SURE TO REMOVE THE RED WIRE FROM THE ESC PLUG THAT GOES INTO THE RECEIVER!!!

If you choose to use a voltage booster, it works exactly how it sounds. Instead of plugging the ESC into the receiver, it plugs into the booster, and the booster plug goes to the ESC, supplying the higher voltage.

1S ESC:
If there are any missing please add them!!

If anyone would like a need for a chart comparing the ESC's specs PM fenton06 and I'll get one made and put in here!
Voltage Boosters:
If there are any missing please add them!
Servos:
BODIES:
Black Art (CRC - US Dist):
  • Audi R8C - BA002 - .020 Thick



  • Black Market (Mohawk 12) - BA005 - .020



  • Lola B10 - BA006 - .020 thick
  • Toyota TS030 - BA008 - .020 thick

    Lola - black/red, TS030 - green/pink


PROTOForm:

Reflex Racing/RSD:

SUSPENSION ADJUSTMENTS:

Print Wikipost

Reply
 
Thread Tools Search this Thread
Old 03-16-2004, 11:39 AM   #7216
Tech Elite
 
nashrcracer's Avatar
R/C Tech Charter Subscriber
 
Join Date: Nov 2001
Location: LA - Lower Antioch
Posts: 4,849
Trader Rating: 1 (100%+)
Default Re: Re: Re: Re: visualize whirrled peas

Quote:
Originally posted by sands
No! Black Rules!
I liked the red chassis that Hot Trick used. that was the bomb!
__________________
RC50 As you come into this world, something else is also born. You begin your life, and it begins a journey towards you. It moves slowly, but it never stops. Wherever you go, whatever path you take, it will follow — never faster, never slower, always coming. You will run, it will walk. You will rest, it will not. One day, you will linger in the same place too long — you will sit too still, or sleep too deep. And when, too late, you rise to go, you will notice a second shadow next to yours. Your life will then be over.
nashrcracer is offline   Reply With Quote
Old 03-16-2004, 11:53 AM   #7217
Tech Elite
 
dr_hfuhuhurr's Avatar
 
Join Date: Aug 2003
Location: Westchester, NY
Posts: 4,422
Trader Rating: 69 (100%+)
Default

Red chassis only work well with trailing arms.
__________________
"There is a fine line between hobby and mental illness. Which side are you on?"

“Life is hard; it's harder if you're stupid.” - John Wayne
dr_hfuhuhurr is offline   Reply With Quote
Old 03-16-2004, 03:37 PM   #7218
Tech Elite
 
odpurple's Avatar
 
Join Date: Dec 2002
Location: San Francisco
Posts: 2,187
Default David L

You are the Virtuoso of Verbosity!
O'D
odpurple is offline   Reply With Quote
Old 03-16-2004, 03:48 PM   #7219
Tech Addict
 
Join Date: Nov 2003
Location: Ridin my Harley
Posts: 707
Trader Rating: 3 (100%+)
Send a message via AIM to Adam Hartzell
Default

davidl--If you would like I can give a full disertation on super-string theory to really prove why a t-plate car is better.

By the way super-string theory is a real thing. Just read the book "The Fabric of the Cosmos" by Brian Green.
Adam Hartzell is offline   Reply With Quote
Old 03-16-2004, 04:09 PM   #7220
Tech Master
 
FUK_WRX's Avatar
 
Join Date: Feb 2003
Location: Sydney, Australia
Posts: 1,823
Trader Rating: 1 (100%+)
Send a message via ICQ to FUK_WRX Send a message via AIM to FUK_WRX Send a message via MSN to FUK_WRX Send a message via Yahoo to FUK_WRX
Default

I really cant decide which one to get. How much is the PRC conversion?
FUK_WRX is offline   Reply With Quote
Old 03-16-2004, 04:10 PM   #7221
Tech Master
 
FUK_WRX's Avatar
 
Join Date: Feb 2003
Location: Sydney, Australia
Posts: 1,823
Trader Rating: 1 (100%+)
Send a message via ICQ to FUK_WRX Send a message via AIM to FUK_WRX Send a message via MSN to FUK_WRX Send a message via Yahoo to FUK_WRX
Default

Quote:
Originally posted by speedxl
fuk wrx! i like writing that fuk wrx here is the link for prchttp://www.powellracingcomponents.com/
if you have a problem contacting doug pm me with you contact numbers and i will contact him personally for you and have him call you. i am one of his drivers and i am here to help.

thanks; Hector
Hector thanks for your help and im glad you like saying FUK WRX. Anyway is this coversion good for outdoor use, we dont have any indoor tracks in Australia
FUK_WRX is offline   Reply With Quote
Old 03-16-2004, 04:31 PM   #7222
Tech Elite
 
speedxl's Avatar
R/C Tech Charter Subscriber
 
Join Date: Jun 2003
Location: Portland Oregon.
Posts: 3,876
Default

yes fuk! it works well out doors on asphalt as that is what i primaraly run i will even pm you the set up for the car to help you out when the time comes.
the car works extremely well on carpet as does it work on asphalt all you need is the different setups and your are dialed, dont worry i'll hook you up!
__________________
Pemberton / R1 / All out motorsports / Team Power Push
speedxl is offline   Reply With Quote
Old 03-16-2004, 04:45 PM   #7223
Tech Rookie
 
Join Date: Mar 2004
Posts: 6
Default

How much is the Q12 conversion?
roadmaster is offline   Reply With Quote
Old 03-16-2004, 04:49 PM   #7224
Tech Elite
 
speedxl's Avatar
R/C Tech Charter Subscriber
 
Join Date: Jun 2003
Location: Portland Oregon.
Posts: 3,876
Default

pm doug powell and he give you a definate price quote! i believe the kit is $100.00 US dollars.
email him athttp://www.powellracingcomponents.com/

good luck.
__________________
Pemberton / R1 / All out motorsports / Team Power Push
speedxl is offline   Reply With Quote
Old 03-16-2004, 05:23 PM   #7225
Tech Master
 
FUK_WRX's Avatar
 
Join Date: Feb 2003
Location: Sydney, Australia
Posts: 1,823
Trader Rating: 1 (100%+)
Send a message via ICQ to FUK_WRX Send a message via AIM to FUK_WRX Send a message via MSN to FUK_WRX Send a message via Yahoo to FUK_WRX
Default

Quote:
Originally posted by speedxl
yes fuk! it works well out doors on asphalt as that is what i primaraly run i will even pm you the set up for the car to help you out when the time comes.
the car works extremely well on carpet as does it work on asphalt all you need is the different setups and your are dialed, dont worry i'll hook you up!
I PM Doug im going to buy one now need some new pods do PRC sell them too ?? Thanks heaps for your help set-up would be nice
FUK_WRX is offline   Reply With Quote
Old 03-16-2004, 05:26 PM   #7226
Tech Master
 
Speedie's Avatar
 
Join Date: Feb 2003
Location: Wisconsin
Posts: 1,844
Default

Can someone tell me what all the Quad 12 kit comes with? Do the tubes come with it? IT looks like it would be cheaper to buy a kit from PRC and finish it than to buy a new 12l4.
__________________
www.victoryhobbies.com Greenbay, Wisconsin
Speedie is offline   Reply With Quote
Old 03-16-2004, 05:36 PM   #7227
Tech Elite
 
speedxl's Avatar
R/C Tech Charter Subscriber
 
Join Date: Jun 2003
Location: Portland Oregon.
Posts: 3,876
Default

speedie you get all the graphite and the aluminum stand offs hardware and dampner tubes, all you need to get sep is the front supension and a few other things pm doug its easier for him to tell you i got to go ! good night!
__________________
Pemberton / R1 / All out motorsports / Team Power Push
speedxl is offline   Reply With Quote
Old 03-16-2004, 05:38 PM   #7228
Tech Addict
 
Join Date: Nov 2003
Location: Ridin my Harley
Posts: 707
Trader Rating: 3 (100%+)
Send a message via AIM to Adam Hartzell
Default

The Quad 12 is a conversion kit for the 12l3 so it only comes with the chassis components. I know that Doug would like to eventually sell it as a complete kit.
Adam Hartzell is offline   Reply With Quote
Old 03-16-2004, 05:45 PM   #7229
Tech Master
 
FUK_WRX's Avatar
 
Join Date: Feb 2003
Location: Sydney, Australia
Posts: 1,823
Trader Rating: 1 (100%+)
Send a message via ICQ to FUK_WRX Send a message via AIM to FUK_WRX Send a message via MSN to FUK_WRX Send a message via Yahoo to FUK_WRX
Default Old skool front end

I notice that the old front end is being used in the PRC cars and other 1/12 cars lately is there any reason for this? Or is this setup for carpet only?
FUK_WRX is offline   Reply With Quote
Old 03-16-2004, 07:02 PM   #7230
Company Representative
 
Tres's Avatar
R/C Tech Charter Subscriber
 
Join Date: Oct 2001
Location: WWW.TNT-FX.COM
Posts: 3,403
Trader Rating: 14 (100%+)
Default

FUK_WRX: the O'l Skool rocks in stock.....

The reason have been stated many times...
Doesn't tweek easy, lighter, less adjustment, etc....


However, in mod I prefer the new style....
About .2-.3 worth
__________________
Tre's
TnT-Fx Custom Graphics
www.tnt-fx.com
Tres is offline   Reply With Quote
Reply

Similar Threads
Thread Thread Starter Forum Replies Last Post
New to the forum mig rod Electric Off-Road 1 01-05-2008 05:23 PM
hi i need help and im new to the forum racer4 Rookie Zone 4 01-21-2007 02:37 PM
Why is this forum listed under the On Road Forum? sport10 Onroad Nitro Engine Zone 0 01-11-2007 08:06 AM
Forum Changes... futureal Wisconsin & Illinois Racing 3 10-28-2002 09:26 PM



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off



All times are GMT -7. It is currently 12:51 PM.


Powered By: vBulletin v3.9.2.1
Privacy Policy | Terms of Use | Advertise Content © 2001-2011 RCTech.net

SEO by vBSEO 3.5.0