R/C Tech Forums

Go Back   R/C Tech Forums > General Forums > Electric On-Road

    Hide Wikipost
Old 10-28-2016, 12:43 PM   -   Wikipost
R/C Tech Forums Thread Wiki: 1/12 forum
Please read: This is a community-maintained wiki post containing the most important information from this thread. You may edit the Wiki once you have been a member for 90 days and have made 90 posts.
 
Last edit by: fenton06
This is a place to share knowledge related to 1/12th scale racing. It is not to be used for conversations.

KITS:
Click links to go to manufacturer product page. If any are missing please add them!

TIRES:
Pre-mounted tires readily available in the US:
Pre-mounted tires readily available in the Europe:
  • Hot Race ??

Gluing your own donuts:
https://www.youtube.com/watch?v=hm7z1rz-74s - Special thanks to Edward Pickering!
Truing tires:
https://www.youtube.com/watch?v=8wqHOLWq6Uc - Special thanks to Edward Pickering!

The following information came from HERE, with some editing and information added. Thanks Christian!

THIS MAY NEED UPDATING FOR THE NEW BLACK CRC CARPET

Brands:
BSR, CRC, Jaco:
Pro One is no longer selling to the public, but it and the brands above are all mounted by BSR and use the same foam. The nomenclature of the BSR vs Jaco/CRC is a little different in a few instances but is otherwise the same. The BSR foam consists of three families, and can be identifed as synthetics, naturals, and blends.

Synthetics - The old school, light weight, easy to true "dry feeling" tires. These include tires like CRC/Jaco Yellow (BSR White), Black, Gray, etc. These tires offer the highest wear rate and lowest grip. Many racers continue to use these nder high bite conditions.

Naturals - These tires are usually the best alternative for low bite and asphalt. They include Pink, Magenta, Double Pink, Lilac (BSR Team Purple), Purple, and other tires. These tires provide a ton of grip, but tend to get sticky in high bite conditions. This rubber does not wear as easily, and the cars will pick up gunk and fibers from the carpet under most high bite conditions. This is especially bad if the humidity is high.

Blends - These are the tires most people run today. They were initially called "JFT foam" by some, as it was believed that the tires were the same as the JFT tires. We can divide the blends further into two groups: high rubber and low rubber content. The high rubber would be the new rear Orange and Red from the BSR family, and the low rubber would be the Green and Blue varieties. When, asked about the difference, John Foister from BSR Tires said they came from the same "family" of foam, but they offered different grip. According to John, the Green/Blue has more bite than Orange/Red, but from track testing Oranges offer more bite than Green (being equivalent to in hardness) when the grip is high and absolutely no grip when it is lower. The Orange foam has a denser pore structure and the tire is not as prone to chunking. It is also important to note is that BSR Blue rears are not the same as the BSR Blue fronts!

JFT:
JFT stands for Japan Foam Tire. They started the new wave of foam tires we are all using now (Blue/Blu, Green/Greene, Dbl Blue, etc). These tires are a little different than the BSR tire family, but work in very similar conditions. They offers four varieties A (asphalt), C (carpet), S (???), and R (???). This does not mean that those types only work on that surface, but this is what they recommend.

JFT uses the same foam for fronts and rears if the color is the same.

A: Used on asphalt, considered close to the natural rubber variety and are named consistently with other natural tires.
C: Used on carpet, considered a blend.
S: Used on carpet?, tires are ???
R: Used on carpet?, tires are ???

For setup, the JFT foam seem to generate more bite than the BSR, therefore the car tends to be a little more aggressive.

Ulti:
Ulti is another Japanese brand that offers an array of compounds. They have their own way of rating tires, and are difficult to equate to other brands. They have 4 different varieties, each in varying degrees of hardness.

J: High rubber content tire, similar to Pink/ Magenta. Soft would be close to a pink. These offer the most bite and are great for asphalt/carpet front tire. (J hard being very popular)
X: "Balanced" blend, similar to JFT Blue/ Green. Soft is equivalent to Green, medium to Blue in hardness. Great for carpet!
Y: High synthetic blend with lower grip, and is not a very popular variety.
Z: A very expensive "special" foam that is supposed to be magic on asphalt. Only make it in soft shore.
European tires:
There are many great European foam tire brands that use their own types of foam, as well as traditional foams. SOmeone with more knowledge about them will need to fill this in!

Tire Diameter:
If you are racing on carpet, you have to evaluate how much grip your track has. If your track is low to medium grip, you can run bigger tires. If you are on higher bite you have to cut them smaller, there is simply no way around it. Bigger tires are needed for asphalt, especially in the rear. The larger tires provide much needed lateral bite.

Carpet (mm):
Low - Medium Bite
Front: 42.0 - 42.5
Rear: 42.5 - 43.00
Medium - High Bite
Front: 40.5 - 41.0
Rear: 41.5 - 42.0
Big Race
Front: 39.5 - 40.0
Rear: 40.5 - 41.0
Asphalt (mm):
Parking Lot
Front: 43.0 - 44.0
Rear: 44.0 - 45.0
Prepped High Bite
Front: 42.0 - 43.0
Rear: 43.0 - 44.0

Tire Saucing:
Most facilities have moved towards odorless traction additives such as SXT. Some of additives evaporate very quickly and some do not. This seems to be something that is also dependent on tire compound and ambient temperature. For example, saucing a Green compound seems like it never dries, especially when tjhe temperature is lower. We have found that wiping the tires off 15 minutes before we go run allows the sauce to cure, which makes the car come in much quicker with Green rears. Blue compounds on the other hand, do fine when wiped off right before hitting the track.

Saucing half front and full rear is a good initial starting point. If the front of the car is too agressive you can sauce les than half, or for a shorter amount of time.
Tire Fuzzing:
In conditions of increasing grip, foam tires will somewtimes get sticky and pick up fuzz and debris from the track. This is highly dependent on the rubber sedan tire that is being run at your local track and the compound/ type of foam you are running on you car. The softer the sedan tire and the harder/higher rubber content in your foam tire, trouble with fuzzing seems more likely to occur.

There are ways to get around fuzzing under most conditions, and usually involves the selection of the correct foam compound. The more fuzz you get, the softer/lower rubber content you want to run.

Examples:
Problem: Car fuzzes with Lilac/Team Purple fronts and car starts pushing.
Solution: Use a softer front tire and or different family of foam. Replace it with Blue or Double Blue front.

Problem: Car loses rear bite 6 minutes into the run. Blue rear tires look almost clean but have small carpet hairs.
Solution: Use Green rear tires. The softer compound wears instead of getting sticky, minimizing fuzz.

Tire Selection:
Starting out, pick 2 tire compounds for the front and rear. The following should have you covered 99% of the time.

Front - Green and Blue (BSR) or Green and Light Blue (JFT)
Rear - Blue and Double Blue (BSR) or Blue and Dark Blue (JFT)

You may wonder about other compounds out there and if they might be better, trust me, they probably won't be. Even if there are other tires that can be as fast, the synthetic family wears out really fast and the high natural rubber will probably fuzz on you over an 8 minute run. The blends family seems to be the most versatile foam type available today. They last awhile, and sticking to them will make your process of tire selection simpler.
Tire Charts:
BSR/CRC/Jaco



Contact



Corally



JFT (Japan Foam Tire)



Ulti



Enneti (Xceed)



ELECTRONICS:
ESC:
As of now, ROAR is staying 1S (3.7V nominal; 4.2V fully charged) for 1/12. There are many 1S ESC's with a built in BEC so nothing else is required to power the receiver and servo.

If you don't want to lock yourself into a 1S specific ESC, you do have other options! It is possible to use your 2S ESC without a booster or receiver pack, and the ESC simply supplies the lower voltage. If that does not appeal to you, you will need to use an Rx pack or booster. The Rx pack and booster will both supply the receiver with a higher voltage than the 1S pack.

If you decide to use an Rx pack, MAKE SURE TO REMOVE THE RED WIRE FROM THE ESC PLUG THAT GOES INTO THE RECEIVER!!!

If you choose to use a voltage booster, it works exactly how it sounds. Instead of plugging the ESC into the receiver, it plugs into the booster, and the booster plug goes to the ESC, supplying the higher voltage.

1S ESC:
If there are any missing please add them!!

If anyone would like a need for a chart comparing the ESC's specs PM fenton06 and I'll get one made and put in here!
Voltage Boosters:
If there are any missing please add them!
Servos:
BODIES:
Black Art (CRC - US Dist):
  • Audi R8C - BA002 - .020 Thick



  • Black Market (Mohawk 12) - BA005 - .020



  • Lola B10 - BA006 - .020 thick
  • Toyota TS030 - BA008 - .020 thick

    Lola - black/red, TS030 - green/pink


PROTOForm:

Reflex Racing/RSD:

SUSPENSION ADJUSTMENTS:

Print Wikipost

Reply
 
Thread Tools Search this Thread
Old 02-06-2004, 10:13 AM   #6586
Tech Champion
 
rc-zombies's Avatar
 
Join Date: Aug 2001
Location: NorCal. Napa area
Posts: 7,218
Trader Rating: 8 (100%+)
Default

Quote:
Originally posted by Randman
I'm pretty sure I have an idea of what to expect, I'd just like a visual. I may end up using one...
Here ya go... untrimmed bumper
Attached Images
File Type: jpg yrx front bumper 003.jpg (70.9 KB, 253 views)
__________________
HB WCE HARA EDITION CYCLONE: LRP Sphere TC, KO 2363 digital servo.
HB HARA EDITION PRO4: Gone to a new home..

SPEEDTECH|FUTABA|KO|ORION|SPEEDWORLD|HARA
rc-zombies is offline   Reply With Quote
Old 02-06-2004, 11:46 AM   #6587
Tech Master
 
jc510's Avatar
 
Join Date: Dec 2003
Location: Sacramento, Ca
Posts: 1,185
Trader Rating: 7 (100%+)
Default Re: LRP QuantumC2

I run 5 trottle and break and 3 coast it works very good. It will differ from track to track. I run on a very tight short track 8 to 9 sec lap times. lol



Quote:
Originally posted by stumper1
Can anyone give me a good starting set-up for a Quantum Comp2 for12th scale stock?

I may be running 19 turn or mod soon so any tips there would be great too!!

Thanks
jc510 is offline   Reply With Quote
Old 02-06-2004, 11:48 AM   #6588
Tech Master
 
jc510's Avatar
 
Join Date: Dec 2003
Location: Sacramento, Ca
Posts: 1,185
Trader Rating: 7 (100%+)
CRC 3.2 ???

Should the motor bump up to the Football? It limits the gearing options.
Should I trim it.
Anyone?
jc510 is offline   Reply With Quote
Old 02-06-2004, 11:51 AM   #6589
Tech Addict
 
sands's Avatar
 
Join Date: Sep 2003
Location: Iowa
Posts: 620
Default Re: CRC 3.2 ???

Quote:
Originally posted by jc510
Should the motor bump up to the Football? It limits the gearing options.
Should I trim it.
Anyone?
You'll need to trim it. Not much though. what about running a smaller spur?
sands is offline   Reply With Quote
Old 02-06-2004, 11:53 AM   #6590
Tech Addict
 
sands's Avatar
 
Join Date: Sep 2003
Location: Iowa
Posts: 620
Default IRS front end

The IRS front end has been out a while. Wondering if anybody has any feedback?

What handling improvments have you noticed?
Is the roll center adjustment worth the trouble?
Do you run a more angled or more parallel setting?
Longer or shorter arms?

I assume that the roll center adjustment theory is the same for 1/12th as it is for TCs?

Thanks
sands is offline   Reply With Quote
Old 02-06-2004, 11:58 AM   #6591
Tech Elite
 
trackdesigner71's Avatar
 
Join Date: Sep 2002
Location: Lynchburg/Portsmouth, VA
Posts: 4,978
Trader Rating: 4 (100%+)
Send a message via AIM to trackdesigner71 Send a message via Yahoo to trackdesigner71
Default

Quote:
Originally posted by nashrcracer
the new yellow trc rims have 6 holes in them so you can run them on the old two whole axle. as for changing the axle watch that your offset doesn't change the the right side hub is different width from 12LS to 12L3
hey nash, does trinity still distribute TRC tires?
trackdesigner71 is offline   Reply With Quote
Old 02-06-2004, 12:10 PM   #6592
Super Moderator
 
Kraig's Avatar
 
Join Date: Aug 2001
Location: Sun Prairie, WI
Posts: 6,275
Trader Rating: 69 (100%+)
Default

Trinity owns TRC.
__________________
There is great need for a sarcasm font.

You never know when it will strike, but there comes a moment at work when you know that you just aren't going to do anything productive for the rest of the day.

Sometimes I post just to look at my avatar.
Kraig is offline   Reply With Quote
Old 02-06-2004, 05:18 PM   #6593
Tech Prophet
 
Randy Caster's Avatar
R/C Tech Elite Subscriber
 
Join Date: Mar 2003
Location: Irvine, CA
Posts: 16,665
Trader Rating: 45 (100%+)
Default

Quote:
Originally posted by rc-zombies
Here ya go... untrimmed bumper
Cool, not quite what I was expecting. If I chew up my bodies in a hurry I'll buy one...
Randy Caster is offline   Reply With Quote
Old 02-06-2004, 09:05 PM   #6594
Tech Apprentice
 
Jay Boyd's Avatar
 
Join Date: Jan 2004
Location: Canada
Posts: 95
Default

Does anyone have the Yokomo foam bumper in stock? Thanks,Jay.
Jay Boyd is offline   Reply With Quote
Old 02-07-2004, 12:31 AM   #6595
Tech Prophet
 
Randy Caster's Avatar
R/C Tech Elite Subscriber
 
Join Date: Mar 2003
Location: Irvine, CA
Posts: 16,665
Trader Rating: 45 (100%+)
Default

Quote:
Originally posted by Jay Boyd
Does anyone have the Yokomo foam bumper in stock? Thanks,Jay.
I believe I saw it in stock at Speedtechrc.com
Randy Caster is offline   Reply With Quote
Old 02-07-2004, 04:05 AM   #6596
Tech Master
 
Speedie's Avatar
 
Join Date: Feb 2003
Location: Wisconsin
Posts: 1,844
Default

Who sells diff covers?
__________________
www.victoryhobbies.com Greenbay, Wisconsin
Speedie is offline   Reply With Quote
Old 02-07-2004, 09:14 AM   #6597
Moderator
 
Pro ten Holland's Avatar
 
Join Date: May 2003
Location: Druten/Holland (Europe)
Posts: 1,658
Trader Rating: 1 (100%+)
Default

Quote:
Originally posted by SpeediePHATT
Who sells diff covers?
Kimbrough makes them. You'll need to use a kimbrough spur to be able to use them. Tower always has some on stock. Look at www.towerhobbies.com, and search for kimbrough.
__________________
http://www.rc-lemans.de/
Pro ten Holland is offline   Reply With Quote
Old 02-07-2004, 10:16 AM   #6598
Tech Champion
 
rc-zombies's Avatar
 
Join Date: Aug 2001
Location: NorCal. Napa area
Posts: 7,218
Trader Rating: 8 (100%+)
Default

the diff covers work well with Pro10 hubs... due to the size of 12th scale hubs... there is still a gap for dirt and fur balls to get in...
__________________
HB WCE HARA EDITION CYCLONE: LRP Sphere TC, KO 2363 digital servo.
HB HARA EDITION PRO4: Gone to a new home..

SPEEDTECH|FUTABA|KO|ORION|SPEEDWORLD|HARA
rc-zombies is offline   Reply With Quote
Old 02-07-2004, 11:06 AM   #6599
Tech Prophet
 
Randy Caster's Avatar
R/C Tech Elite Subscriber
 
Join Date: Mar 2003
Location: Irvine, CA
Posts: 16,665
Trader Rating: 45 (100%+)
Default

Quote:
Originally posted by rc-zombies
the diff covers work well with Pro10 hubs... due to the size of 12th scale hubs... there is still a gap for dirt and fur balls to get in...
If you are using a large diff ring conversion, they should work pretty well still...
Randy Caster is offline   Reply With Quote
Old 02-07-2004, 11:57 AM   #6600
Tech Champion
 
robk's Avatar
 
Join Date: Aug 2001
Location: Macho Business Donkey Wrestler
Posts: 7,406
Trader Rating: 22 (100%+)
Default

IRS front end:

I have really only run in the upper holes yet. The inner upper can help smooth the car out and give more steering. The outer inner was sort of binding my car up in a chicane ( this was modified). There is usually a little less steering there. The car will roll quickly in that hole. I sort of wonder if my car was contacing the track, but I didn't think to check at the time.

A friend of mine said the lower holes should make the car a "steering machine". I haven't tried yet.
__________________
A mutually re-enforcing cascade of failure

"Failior [sic] crowns enterprise." Robert Goddard

I-Lap Scoring Systems http://www.rclapcounter.com/
robk is offline   Reply With Quote
Reply

Similar Threads
Thread Thread Starter Forum Replies Last Post
New to the forum mig rod Electric Off-Road 1 01-05-2008 05:23 PM
hi i need help and im new to the forum racer4 Rookie Zone 4 01-21-2007 02:37 PM
Why is this forum listed under the On Road Forum? sport10 Onroad Nitro Engine Zone 0 01-11-2007 08:06 AM
Forum Changes... futureal Wisconsin & Illinois Racing 3 10-28-2002 09:26 PM



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off



All times are GMT -7. It is currently 12:51 AM.


Powered By: vBulletin v3.9.2.1
Privacy Policy | Terms of Use | Advertise Content © 2001-2011 RCTech.net

SEO by vBSEO 3.5.0