R/C Tech Forums

Go Back   R/C Tech Forums > General Forums > Electric On-Road

    Hide Wikipost
Old 10-28-2016, 12:43 PM   -   Wikipost
R/C Tech Forums Thread Wiki: 1/12 forum
Please read: This is a community-maintained wiki post containing the most important information from this thread. You may edit the Wiki once you have been a member for 90 days and have made 90 posts.
 
Last edit by: fenton06
This is a place to share knowledge related to 1/12th scale racing. It is not to be used for conversations.

KITS:
Click links to go to manufacturer product page. If any are missing please add them!

TIRES:
Pre-mounted tires readily available in the US:
Pre-mounted tires readily available in the Europe:
  • Hot Race ??

Gluing your own donuts:
https://www.youtube.com/watch?v=hm7z1rz-74s - Special thanks to Edward Pickering!
Truing tires:
https://www.youtube.com/watch?v=8wqHOLWq6Uc - Special thanks to Edward Pickering!

The following information came from HERE, with some editing and information added. Thanks Christian!

THIS MAY NEED UPDATING FOR THE NEW BLACK CRC CARPET

Brands:
BSR, CRC, Jaco:
Pro One is no longer selling to the public, but it and the brands above are all mounted by BSR and use the same foam. The nomenclature of the BSR vs Jaco/CRC is a little different in a few instances but is otherwise the same. The BSR foam consists of three families, and can be identifed as synthetics, naturals, and blends.

Synthetics - The old school, light weight, easy to true "dry feeling" tires. These include tires like CRC/Jaco Yellow (BSR White), Black, Gray, etc. These tires offer the highest wear rate and lowest grip. Many racers continue to use these nder high bite conditions.

Naturals - These tires are usually the best alternative for low bite and asphalt. They include Pink, Magenta, Double Pink, Lilac (BSR Team Purple), Purple, and other tires. These tires provide a ton of grip, but tend to get sticky in high bite conditions. This rubber does not wear as easily, and the cars will pick up gunk and fibers from the carpet under most high bite conditions. This is especially bad if the humidity is high.

Blends - These are the tires most people run today. They were initially called "JFT foam" by some, as it was believed that the tires were the same as the JFT tires. We can divide the blends further into two groups: high rubber and low rubber content. The high rubber would be the new rear Orange and Red from the BSR family, and the low rubber would be the Green and Blue varieties. When, asked about the difference, John Foister from BSR Tires said they came from the same "family" of foam, but they offered different grip. According to John, the Green/Blue has more bite than Orange/Red, but from track testing Oranges offer more bite than Green (being equivalent to in hardness) when the grip is high and absolutely no grip when it is lower. The Orange foam has a denser pore structure and the tire is not as prone to chunking. It is also important to note is that BSR Blue rears are not the same as the BSR Blue fronts!

JFT:
JFT stands for Japan Foam Tire. They started the new wave of foam tires we are all using now (Blue/Blu, Green/Greene, Dbl Blue, etc). These tires are a little different than the BSR tire family, but work in very similar conditions. They offers four varieties A (asphalt), C (carpet), S (???), and R (???). This does not mean that those types only work on that surface, but this is what they recommend.

JFT uses the same foam for fronts and rears if the color is the same.

A: Used on asphalt, considered close to the natural rubber variety and are named consistently with other natural tires.
C: Used on carpet, considered a blend.
S: Used on carpet?, tires are ???
R: Used on carpet?, tires are ???

For setup, the JFT foam seem to generate more bite than the BSR, therefore the car tends to be a little more aggressive.

Ulti:
Ulti is another Japanese brand that offers an array of compounds. They have their own way of rating tires, and are difficult to equate to other brands. They have 4 different varieties, each in varying degrees of hardness.

J: High rubber content tire, similar to Pink/ Magenta. Soft would be close to a pink. These offer the most bite and are great for asphalt/carpet front tire. (J hard being very popular)
X: "Balanced" blend, similar to JFT Blue/ Green. Soft is equivalent to Green, medium to Blue in hardness. Great for carpet!
Y: High synthetic blend with lower grip, and is not a very popular variety.
Z: A very expensive "special" foam that is supposed to be magic on asphalt. Only make it in soft shore.
European tires:
There are many great European foam tire brands that use their own types of foam, as well as traditional foams. SOmeone with more knowledge about them will need to fill this in!

Tire Diameter:
If you are racing on carpet, you have to evaluate how much grip your track has. If your track is low to medium grip, you can run bigger tires. If you are on higher bite you have to cut them smaller, there is simply no way around it. Bigger tires are needed for asphalt, especially in the rear. The larger tires provide much needed lateral bite.

Carpet (mm):
Low - Medium Bite
Front: 42.0 - 42.5
Rear: 42.5 - 43.00
Medium - High Bite
Front: 40.5 - 41.0
Rear: 41.5 - 42.0
Big Race
Front: 39.5 - 40.0
Rear: 40.5 - 41.0
Asphalt (mm):
Parking Lot
Front: 43.0 - 44.0
Rear: 44.0 - 45.0
Prepped High Bite
Front: 42.0 - 43.0
Rear: 43.0 - 44.0

Tire Saucing:
Most facilities have moved towards odorless traction additives such as SXT. Some of additives evaporate very quickly and some do not. This seems to be something that is also dependent on tire compound and ambient temperature. For example, saucing a Green compound seems like it never dries, especially when tjhe temperature is lower. We have found that wiping the tires off 15 minutes before we go run allows the sauce to cure, which makes the car come in much quicker with Green rears. Blue compounds on the other hand, do fine when wiped off right before hitting the track.

Saucing half front and full rear is a good initial starting point. If the front of the car is too agressive you can sauce les than half, or for a shorter amount of time.
Tire Fuzzing:
In conditions of increasing grip, foam tires will somewtimes get sticky and pick up fuzz and debris from the track. This is highly dependent on the rubber sedan tire that is being run at your local track and the compound/ type of foam you are running on you car. The softer the sedan tire and the harder/higher rubber content in your foam tire, trouble with fuzzing seems more likely to occur.

There are ways to get around fuzzing under most conditions, and usually involves the selection of the correct foam compound. The more fuzz you get, the softer/lower rubber content you want to run.

Examples:
Problem: Car fuzzes with Lilac/Team Purple fronts and car starts pushing.
Solution: Use a softer front tire and or different family of foam. Replace it with Blue or Double Blue front.

Problem: Car loses rear bite 6 minutes into the run. Blue rear tires look almost clean but have small carpet hairs.
Solution: Use Green rear tires. The softer compound wears instead of getting sticky, minimizing fuzz.

Tire Selection:
Starting out, pick 2 tire compounds for the front and rear. The following should have you covered 99% of the time.

Front - Green and Blue (BSR) or Green and Light Blue (JFT)
Rear - Blue and Double Blue (BSR) or Blue and Dark Blue (JFT)

You may wonder about other compounds out there and if they might be better, trust me, they probably won't be. Even if there are other tires that can be as fast, the synthetic family wears out really fast and the high natural rubber will probably fuzz on you over an 8 minute run. The blends family seems to be the most versatile foam type available today. They last awhile, and sticking to them will make your process of tire selection simpler.
Tire Charts:
BSR/CRC/Jaco



Contact



Corally



JFT (Japan Foam Tire)



Ulti



Enneti (Xceed)



ELECTRONICS:
ESC:
As of now, ROAR is staying 1S (3.7V nominal; 4.2V fully charged) for 1/12. There are many 1S ESC's with a built in BEC so nothing else is required to power the receiver and servo.

If you don't want to lock yourself into a 1S specific ESC, you do have other options! It is possible to use your 2S ESC without a booster or receiver pack, and the ESC simply supplies the lower voltage. If that does not appeal to you, you will need to use an Rx pack or booster. The Rx pack and booster will both supply the receiver with a higher voltage than the 1S pack.

If you decide to use an Rx pack, MAKE SURE TO REMOVE THE RED WIRE FROM THE ESC PLUG THAT GOES INTO THE RECEIVER!!!

If you choose to use a voltage booster, it works exactly how it sounds. Instead of plugging the ESC into the receiver, it plugs into the booster, and the booster plug goes to the ESC, supplying the higher voltage.

1S ESC:
If there are any missing please add them!!

If anyone would like a need for a chart comparing the ESC's specs PM fenton06 and I'll get one made and put in here!
Voltage Boosters:
If there are any missing please add them!
Servos:
BODIES:
Black Art (CRC - US Dist):
  • Audi R8C - BA002 - .020 Thick



  • Black Market (Mohawk 12) - BA005 - .020



  • Lola B10 - BA006 - .020 thick
  • Toyota TS030 - BA008 - .020 thick

    Lola - black/red, TS030 - green/pink


PROTOForm:

Reflex Racing/RSD:

SUSPENSION ADJUSTMENTS:

Print Wikipost

Reply
 
Thread Tools Search this Thread
Old 02-05-2004, 04:36 AM   #6571
Tech Addict
 
sean's Avatar
 
Join Date: Mar 2003
Posts: 702
Default

just get the 1/12 kydex bumper direct from CRC. it works great and has no problem fitting under bodies. in fact it fits the parma speed 8 perfect. i think they had that body in mind when designing it. oh and dont everybody start jumping up and down saying its too heavy or effects steering, because its not
and it doesnt.

Quote:
Originally posted by stumper1
That's what I figured - looks like a great idea. Anyone know where to get them?
sean is offline   Reply With Quote
Old 02-05-2004, 05:59 AM   #6572
Tech Addict
 
sands's Avatar
 
Join Date: Sep 2003
Location: Iowa
Posts: 620
Default

I've been running a bumper for this season and it has saved a suspension re-build at least twice and has probably saved about 3 bodies. (they don't get wrapped under the nose anymore)
sands is offline   Reply With Quote
Old 02-05-2004, 08:25 AM   #6573
Tech Elite
 
trackdesigner71's Avatar
 
Join Date: Sep 2002
Location: Lynchburg/Portsmouth, VA
Posts: 4,978
Trader Rating: 4 (100%+)
Send a message via AIM to trackdesigner71 Send a message via Yahoo to trackdesigner71
Default

Hey, another question.

Can I change the 12L from the two hole to the three hole axle? I was talkin to a guy from Jaco and he says that most rear tires are set up for the three hole axle.
trackdesigner71 is offline   Reply With Quote
Old 02-05-2004, 08:33 AM   #6574
Tech Addict
 
sands's Avatar
 
Join Date: Sep 2003
Location: Iowa
Posts: 620
Default

You need to get a new axle assembly. Might as well get a large ring diff while you are at it. CRC and IRS have aftermarket options. Both are very good.
sands is offline   Reply With Quote
Old 02-05-2004, 09:31 AM   #6575
Tech Addict
 
stumper1's Avatar
R/C Tech Charter Subscriber
 
Join Date: Oct 2002
Posts: 549
Trader Rating: 2 (100%+)
Default

Quote:
Originally posted by sean
just get the 1/12 kydex bumper direct from CRC. it works great and has no problem fitting under bodies. in fact it fits the parma speed 8 perfect. i think they had that body in mind when designing it. oh and dont everybody start jumping up and down saying its too heavy or effects steering, because its not
and it doesnt.
I got a CRC bumper but it doesn't fit my Quad12 very well. Maybe Doug can make one to fit.........
stumper1 is offline   Reply With Quote
Old 02-05-2004, 10:30 AM   #6576
Tech Regular
 
DPowell's Avatar
 
Join Date: Apr 2003
Location: Denver, CO
Posts: 454
Trader Rating: 3 (100%+)
Default

Quote:
Originally posted by stumper1
I got a CRC bumper but it doesn't fit my Quad12 very well. Maybe Doug can make one to fit.........

stumper1,
A Yokomo foam bumper works great on the Quad12. They are a real body saver. Another thing you can do is to put 5/8" or 3/4" rubber bevel washers under the front body posts. Bevel washers are available in the plumbing department of your local hardware store.

D.P.
__________________
www.powellracingcomponents.com
**Record setting carbon fiber**

Speedmerchant and TOP USA dealer.
DPowell is offline   Reply With Quote
Old 02-05-2004, 11:18 AM   #6577
Tech Elite
 
nashrcracer's Avatar
R/C Tech Charter Subscriber
 
Join Date: Nov 2001
Location: LA - Lower Antioch
Posts: 4,849
Trader Rating: 1 (100%+)
Default

Quote:
Originally posted by trackdesigner71
Hey, another question.

Can I change the 12L from the two hole to the three hole axle? I was talkin to a guy from Jaco and he says that most rear tires are set up for the three hole axle.
the new yellow trc rims have 6 holes in them so you can run them on the old two whole axle. as for changing the axle watch that your offset doesn't change the the right side hub is different width from 12LS to 12L3
__________________
RC50 As you come into this world, something else is also born. You begin your life, and it begins a journey towards you. It moves slowly, but it never stops. Wherever you go, whatever path you take, it will follow never faster, never slower, always coming. You will run, it will walk. You will rest, it will not. One day, you will linger in the same place too long you will sit too still, or sleep too deep. And when, too late, you rise to go, you will notice a second shadow next to yours. Your life will then be over.
nashrcracer is offline   Reply With Quote
Old 02-05-2004, 11:42 AM   #6578
Tech Elite
 
markp27's Avatar
 
Join Date: Jan 2003
Location: Nuremberg, Germany
Posts: 4,069
Send a message via ICQ to markp27
Default

What kind of bumber works well on the corally G3?
markp27 is offline   Reply With Quote
Old 02-05-2004, 12:56 PM   #6579
Tech Addict
 
stumper1's Avatar
R/C Tech Charter Subscriber
 
Join Date: Oct 2002
Posts: 549
Trader Rating: 2 (100%+)
Default

Quote:
Originally posted by DPowell
stumper1,
A Yokomo foam bumper works great on the Quad12. They are a real body saver. Another thing you can do is to put 5/8" or 3/4" rubber bevel washers under the front body posts. Bevel washers are available in the plumbing department of your local hardware store.

D.P.
D.P.
Do you by chance have a part# for the Yok bumper?
stumper1 is offline   Reply With Quote
Old 02-05-2004, 01:16 PM   #6580
Tech Champion
 
Matt Howard's Avatar
 
Join Date: Aug 2001
Location: Abilene TX
Posts: 5,952
Trader Rating: 6 (100%+)
Default

Yokomo lists part # sp-12lsb as a Urethane foam bumper for an AE type front end, list price $5.50. I've never seen any pics of it but this should be what you need.
__________________
Official member of The Guild of Calamitous Intent and proud supporter of Conjectural Technologies.
Serpent S411 LE kit #192
RCTech #361
Matt Howard is offline   Reply With Quote
Old 02-05-2004, 01:19 PM   #6581
Tech Champion
 
rc-zombies's Avatar
 
Join Date: Aug 2001
Location: NorCal. Napa area
Posts: 7,218
Trader Rating: 8 (100%+)
Default

Quote:
Originally posted by Matt Howard
Yokomo lists part # sp-12lsb as a Urethane foam bumper for an AE type front end, list price $5.50. I've never seen any pics of it but this should be what you need.
I have one and still has to be trimmed down to fit the body correctly...almost half of it is gone...
__________________
HB WCE HARA EDITION CYCLONE: LRP Sphere TC, KO 2363 digital servo.
HB HARA EDITION PRO4: Gone to a new home..

SPEEDTECH|FUTABA|KO|ORION|SPEEDWORLD|HARA
rc-zombies is offline   Reply With Quote
Old 02-05-2004, 02:36 PM   #6582
Tech Prophet
 
Randy Caster's Avatar
R/C Tech Elite Subscriber
 
Join Date: Mar 2003
Location: Irvine, CA
Posts: 16,665
Trader Rating: 45 (100%+)
Default

Can you post a pic Ramon, I'm interested to see what it looks like...
Randy Caster is offline   Reply With Quote
Old 02-05-2004, 02:37 PM   #6583
Tech Champion
 
rc-zombies's Avatar
 
Join Date: Aug 2001
Location: NorCal. Napa area
Posts: 7,218
Trader Rating: 8 (100%+)
Default

Quote:
Originally posted by Randman
Can you post a pic Ramon, I'm interested to see what it looks like...
I'll try to take a pic tonight...basically a foam bumber similar to the HPI foam bumpers... and fit right onto the front body post.
__________________
HB WCE HARA EDITION CYCLONE: LRP Sphere TC, KO 2363 digital servo.
HB HARA EDITION PRO4: Gone to a new home..

SPEEDTECH|FUTABA|KO|ORION|SPEEDWORLD|HARA
rc-zombies is offline   Reply With Quote
Old 02-05-2004, 03:02 PM   #6584
Tech Prophet
 
Randy Caster's Avatar
R/C Tech Elite Subscriber
 
Join Date: Mar 2003
Location: Irvine, CA
Posts: 16,665
Trader Rating: 45 (100%+)
Default

Quote:
Originally posted by rc-zombies
I'll try to take a pic tonight...basically a foam bumber similar to the HPI foam bumpers... and fit right onto the front body post.
I'm pretty sure I have an idea of what to expect, I'd just like a visual. I may end up using one...
Randy Caster is offline   Reply With Quote
Old 02-06-2004, 10:09 AM   #6585
Tech Addict
 
stumper1's Avatar
R/C Tech Charter Subscriber
 
Join Date: Oct 2002
Posts: 549
Trader Rating: 2 (100%+)
Default LRP QuantumC2

Can anyone give me a good starting set-up for a Quantum Comp2 for12th scale stock?

I may be running 19 turn or mod soon so any tips there would be great too!!

Thanks
stumper1 is offline   Reply With Quote
Reply

Similar Threads
Thread Thread Starter Forum Replies Last Post
New to the forum mig rod Electric Off-Road 1 01-05-2008 05:23 PM
hi i need help and im new to the forum racer4 Rookie Zone 4 01-21-2007 02:37 PM
Why is this forum listed under the On Road Forum? sport10 Onroad Nitro Engine Zone 0 01-11-2007 08:06 AM
Forum Changes... futureal Wisconsin & Illinois Racing 3 10-28-2002 09:26 PM



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off



All times are GMT -7. It is currently 06:43 AM.


Powered By: vBulletin v3.9.2.1
Privacy Policy | Terms of Use | Advertise Content © 2001-2011 RCTech.net

SEO by vBSEO 3.5.0