R/C Tech Forums

Go Back   R/C Tech Forums > General Forums > Electric On-Road

    Hide Wikipost
Old 10-28-2016, 12:43 PM   -   Wikipost
R/C Tech Forums Thread Wiki: 1/12 forum
Please read: This is a community-maintained wiki post containing the most important information from this thread. You may edit the Wiki once you have been a member for 90 days and have made 90 posts.
 
Last edit by: fenton06
This is a place to share knowledge related to 1/12th scale racing. It is not to be used for conversations.

KITS:
Click links to go to manufacturer product page. If any are missing please add them!

TIRES:
Pre-mounted tires readily available in the US:
Pre-mounted tires readily available in the Europe:
  • Hot Race ??

Gluing your own donuts:
https://www.youtube.com/watch?v=hm7z1rz-74s - Special thanks to Edward Pickering!
Truing tires:
https://www.youtube.com/watch?v=8wqHOLWq6Uc - Special thanks to Edward Pickering!

The following information came from HERE, with some editing and information added. Thanks Christian!

THIS MAY NEED UPDATING FOR THE NEW BLACK CRC CARPET

Brands:
BSR, CRC, Jaco:
Pro One is no longer selling to the public, but it and the brands above are all mounted by BSR and use the same foam. The nomenclature of the BSR vs Jaco/CRC is a little different in a few instances but is otherwise the same. The BSR foam consists of three families, and can be identifed as synthetics, naturals, and blends.

Synthetics - The old school, light weight, easy to true "dry feeling" tires. These include tires like CRC/Jaco Yellow (BSR White), Black, Gray, etc. These tires offer the highest wear rate and lowest grip. Many racers continue to use these nder high bite conditions.

Naturals - These tires are usually the best alternative for low bite and asphalt. They include Pink, Magenta, Double Pink, Lilac (BSR Team Purple), Purple, and other tires. These tires provide a ton of grip, but tend to get sticky in high bite conditions. This rubber does not wear as easily, and the cars will pick up gunk and fibers from the carpet under most high bite conditions. This is especially bad if the humidity is high.

Blends - These are the tires most people run today. They were initially called "JFT foam" by some, as it was believed that the tires were the same as the JFT tires. We can divide the blends further into two groups: high rubber and low rubber content. The high rubber would be the new rear Orange and Red from the BSR family, and the low rubber would be the Green and Blue varieties. When, asked about the difference, John Foister from BSR Tires said they came from the same "family" of foam, but they offered different grip. According to John, the Green/Blue has more bite than Orange/Red, but from track testing Oranges offer more bite than Green (being equivalent to in hardness) when the grip is high and absolutely no grip when it is lower. The Orange foam has a denser pore structure and the tire is not as prone to chunking. It is also important to note is that BSR Blue rears are not the same as the BSR Blue fronts!

JFT:
JFT stands for Japan Foam Tire. They started the new wave of foam tires we are all using now (Blue/Blu, Green/Greene, Dbl Blue, etc). These tires are a little different than the BSR tire family, but work in very similar conditions. They offers four varieties A (asphalt), C (carpet), S (???), and R (???). This does not mean that those types only work on that surface, but this is what they recommend.

JFT uses the same foam for fronts and rears if the color is the same.

A: Used on asphalt, considered close to the natural rubber variety and are named consistently with other natural tires.
C: Used on carpet, considered a blend.
S: Used on carpet?, tires are ???
R: Used on carpet?, tires are ???

For setup, the JFT foam seem to generate more bite than the BSR, therefore the car tends to be a little more aggressive.

Ulti:
Ulti is another Japanese brand that offers an array of compounds. They have their own way of rating tires, and are difficult to equate to other brands. They have 4 different varieties, each in varying degrees of hardness.

J: High rubber content tire, similar to Pink/ Magenta. Soft would be close to a pink. These offer the most bite and are great for asphalt/carpet front tire. (J hard being very popular)
X: "Balanced" blend, similar to JFT Blue/ Green. Soft is equivalent to Green, medium to Blue in hardness. Great for carpet!
Y: High synthetic blend with lower grip, and is not a very popular variety.
Z: A very expensive "special" foam that is supposed to be magic on asphalt. Only make it in soft shore.
European tires:
There are many great European foam tire brands that use their own types of foam, as well as traditional foams. SOmeone with more knowledge about them will need to fill this in!

Tire Diameter:
If you are racing on carpet, you have to evaluate how much grip your track has. If your track is low to medium grip, you can run bigger tires. If you are on higher bite you have to cut them smaller, there is simply no way around it. Bigger tires are needed for asphalt, especially in the rear. The larger tires provide much needed lateral bite.

Carpet (mm):
Low - Medium Bite
Front: 42.0 - 42.5
Rear: 42.5 - 43.00
Medium - High Bite
Front: 40.5 - 41.0
Rear: 41.5 - 42.0
Big Race
Front: 39.5 - 40.0
Rear: 40.5 - 41.0
Asphalt (mm):
Parking Lot
Front: 43.0 - 44.0
Rear: 44.0 - 45.0
Prepped High Bite
Front: 42.0 - 43.0
Rear: 43.0 - 44.0

Tire Saucing:
Most facilities have moved towards odorless traction additives such as SXT. Some of additives evaporate very quickly and some do not. This seems to be something that is also dependent on tire compound and ambient temperature. For example, saucing a Green compound seems like it never dries, especially when tjhe temperature is lower. We have found that wiping the tires off 15 minutes before we go run allows the sauce to cure, which makes the car come in much quicker with Green rears. Blue compounds on the other hand, do fine when wiped off right before hitting the track.

Saucing half front and full rear is a good initial starting point. If the front of the car is too agressive you can sauce les than half, or for a shorter amount of time.
Tire Fuzzing:
In conditions of increasing grip, foam tires will somewtimes get sticky and pick up fuzz and debris from the track. This is highly dependent on the rubber sedan tire that is being run at your local track and the compound/ type of foam you are running on you car. The softer the sedan tire and the harder/higher rubber content in your foam tire, trouble with fuzzing seems more likely to occur.

There are ways to get around fuzzing under most conditions, and usually involves the selection of the correct foam compound. The more fuzz you get, the softer/lower rubber content you want to run.

Examples:
Problem: Car fuzzes with Lilac/Team Purple fronts and car starts pushing.
Solution: Use a softer front tire and or different family of foam. Replace it with Blue or Double Blue front.

Problem: Car loses rear bite 6 minutes into the run. Blue rear tires look almost clean but have small carpet hairs.
Solution: Use Green rear tires. The softer compound wears instead of getting sticky, minimizing fuzz.

Tire Selection:
Starting out, pick 2 tire compounds for the front and rear. The following should have you covered 99% of the time.

Front - Green and Blue (BSR) or Green and Light Blue (JFT)
Rear - Blue and Double Blue (BSR) or Blue and Dark Blue (JFT)

You may wonder about other compounds out there and if they might be better, trust me, they probably won't be. Even if there are other tires that can be as fast, the synthetic family wears out really fast and the high natural rubber will probably fuzz on you over an 8 minute run. The blends family seems to be the most versatile foam type available today. They last awhile, and sticking to them will make your process of tire selection simpler.
Tire Charts:
BSR/CRC/Jaco



Contact



Corally



JFT (Japan Foam Tire)



Ulti



Enneti (Xceed)



ELECTRONICS:
ESC:
As of now, ROAR is staying 1S (3.7V nominal; 4.2V fully charged) for 1/12. There are many 1S ESC's with a built in BEC so nothing else is required to power the receiver and servo.

If you don't want to lock yourself into a 1S specific ESC, you do have other options! It is possible to use your 2S ESC without a booster or receiver pack, and the ESC simply supplies the lower voltage. If that does not appeal to you, you will need to use an Rx pack or booster. The Rx pack and booster will both supply the receiver with a higher voltage than the 1S pack.

If you decide to use an Rx pack, MAKE SURE TO REMOVE THE RED WIRE FROM THE ESC PLUG THAT GOES INTO THE RECEIVER!!!

If you choose to use a voltage booster, it works exactly how it sounds. Instead of plugging the ESC into the receiver, it plugs into the booster, and the booster plug goes to the ESC, supplying the higher voltage.

1S ESC:
If there are any missing please add them!!

If anyone would like a need for a chart comparing the ESC's specs PM fenton06 and I'll get one made and put in here!
Voltage Boosters:
If there are any missing please add them!
Servos:
BODIES:
Black Art (CRC - US Dist):
  • Audi R8C - BA002 - .020 Thick



  • Black Market (Mohawk 12) - BA005 - .020



  • Lola B10 - BA006 - .020 thick
  • Toyota TS030 - BA008 - .020 thick

    Lola - black/red, TS030 - green/pink


PROTOForm:

Reflex Racing/RSD:

SUSPENSION ADJUSTMENTS:

Print Wikipost

Reply
 
Thread Tools Search this Thread
Old 01-20-2004, 01:28 AM   #6196
Tech Adept
 
Join Date: Jun 2003
Location: SoCal
Posts: 153
Default

Quote:
Originally posted by AdrianM
Mike McMahon just TQ'd and won the January Jam in 1/12 Mod with his CRC T-bar car. Dumas was 2nd.
Eric D (12l3) pulled 2nd, not Mike. McMahon almost lost it after leading the race, he dumped, and won by .03 seconds.

Mike's car was dialed.
spyderx is offline   Reply With Quote
Old 01-20-2004, 04:44 AM   #6197
Tech Adept
 
Join Date: Dec 2003
Posts: 159
Send a message via ICQ to elvo
Default Yok body

http://www.yokomousa.com/bodies/MS_1_pict.html


NE1 every used the yok MS1 body?
elvo is offline   Reply With Quote
Old 01-20-2004, 08:02 AM   #6198
Tech Champion
 
Korey Harbke's Avatar
 
Join Date: Oct 2002
Location: Redmond, WA
Posts: 6,053
Trader Rating: 13 (100%+)
Default

I dont think it would work to well on carpet because it has soooooo much downforce. It would work good outside on asphalt though.

-Sushi Boy
__________________
Pro Spec America/Apex RC - Team ORCA - Awesomatix USA - Roche RC USA - AVID - Sweep - Protoform - Pro-One RC - Slapmaster Tools - Hebiki Design Works - Turtlemaster Racing - Seattle RC Racers - Timezone Hobbies
Korey Harbke is offline   Reply With Quote
Old 01-20-2004, 10:44 AM   #6199
Tech Elite
 
BigDogRacing's Avatar
R/C Tech Charter Subscriber
 
Join Date: Aug 2001
Location: Memphis, TN
Posts: 2,955
Trader Rating: 12 (100%+)
Send a message via MSN to BigDogRacing
Default

Sushi, my Hyperdrive car was so dialed this past weekend at the Mike's Hobby Shop Grand Opening Race that I couldn't believe it!! Kyle Skidmore drove it and said the best thing I can do to that car is not touch it...lol. I was running the basic .020" spring, .073" T-plate, Losi heavy hydradrive fl., purple/grays with a monster stock. Not bragging or anything, just glad because I finally had the experience of racing a good handling car!!
BigDogRacing is offline   Reply With Quote
Old 01-20-2004, 10:52 AM   #6200
Tech Champion
 
Korey Harbke's Avatar
 
Join Date: Oct 2002
Location: Redmond, WA
Posts: 6,053
Trader Rating: 13 (100%+)
Default

Yeah, the hyperdirve's are awesome. I'm kinda using a yokomo/hyperdrive hybrid thingy, but all the hyperdrive cars are stupid fast. I'm rubbing almost the same setup as you only I'm running trc purples and trc granites in the rear for mod. It's crazy how well 1/12 cars handle. Our local fast guys Andrew Cartwright (team schumacher), Travis Schreven (team xray), and a few others run the car and they are all dailed!

-Sushi Boy
__________________
Pro Spec America/Apex RC - Team ORCA - Awesomatix USA - Roche RC USA - AVID - Sweep - Protoform - Pro-One RC - Slapmaster Tools - Hebiki Design Works - Turtlemaster Racing - Seattle RC Racers - Timezone Hobbies
Korey Harbke is offline   Reply With Quote
Old 01-20-2004, 12:01 PM   #6201
Tech Master
 
Join Date: Aug 2001
Location: MD
Posts: 1,497
Trader Rating: 35 (100%+)
Default My CRC 3.1 with DPowell battery hold-down

Per Doug Powell's request, I'm posting photos of my CK with his battery hold down brace.

I raced this past weekend for the first time using it and it worked great. I was looking for an alternative to the "easy to use" "O" ring because, I "suspect" that the "O" ring was causing my chassis to warp. The "O" ring may not be at fault, but my relatively new CK chassis is not flat. I should note, that I didn't check the chassis when I first bought it so it could have been warped from the begining.

Anyway, I've taken a couple of photos that I'm attaching.
Attached Images
File Type: jpg crcchassis2a.jpg (75.0 KB, 157 views)
Geppetto is offline   Reply With Quote
Old 01-20-2004, 12:03 PM   #6202
Tech Master
 
Join Date: Aug 2001
Location: MD
Posts: 1,497
Trader Rating: 35 (100%+)
Default Photo # 2

CK w/ DPowell battery hold-down.
Attached Images
File Type: jpg crcchassis1a.jpg (73.9 KB, 153 views)
Geppetto is offline   Reply With Quote
Old 01-20-2004, 12:04 PM   #6203
Tech Master
 
Join Date: Aug 2001
Location: MD
Posts: 1,497
Trader Rating: 35 (100%+)
Default Last Photo

battery hold-down
Attached Images
File Type: jpg crcchassis5a.jpg (77.2 KB, 132 views)
Geppetto is offline   Reply With Quote
Old 01-20-2004, 12:09 PM   #6204
Tech Master
 
jc510's Avatar
 
Join Date: Dec 2003
Location: Sacramento, Ca
Posts: 1,185
Trader Rating: 7 (100%+)
Default Hey?

I just noticed that battery hold down. I just built my 3.2. Are the batteries not secure with the rubber band they give you?
jc510 is offline   Reply With Quote
Old 01-20-2004, 12:13 PM   #6205
Tech Master
 
Join Date: Aug 2001
Location: MD
Posts: 1,497
Trader Rating: 35 (100%+)
Default Re: Hey?

Quote:
Originally posted by jc510
I just noticed that battery hold down. I just built my 3.2. Are the batteries not secure with the rubber band they give you?
The "O" ring works well. But I "suspect" that it may have contributed to my chassis warping. I don't know that for sure though.
Geppetto is offline   Reply With Quote
Old 01-20-2004, 12:20 PM   #6206
Tech Champion
 
AdrianM's Avatar
 
Join Date: Aug 2001
Location: Tampa, FL
Posts: 5,914
Trader Rating: 4 (100%+)
Default

Tape wont warp chassis and weighs less than o-rings and retianers or graphite and alloy hold downs
__________________
Adrian Martinez
What I run: Schumacher Mi5/Associated RC10R5.1/Associated RC12R5.2/Futaba/HobbyWing/Team EA Motorsports/BSR Racing
Where I run: Florida Indoor R/C Complex/Thunder Racing/Florida On Road State Series
AdrianM is offline   Reply With Quote
Old 01-20-2004, 12:57 PM   #6207
Tech Regular
 
DPowell's Avatar
 
Join Date: Apr 2003
Location: Denver, CO
Posts: 454
Trader Rating: 3 (100%+)
Default

Quote:
Originally posted by AdrianM
Tape wont warp chassis and weighs less than o-rings and retianers or graphite and alloy hold downs
Tape and O-rings can break not to mention the incredible tension that the O-ring puts on the CK or Rev3 chassis. The carbon fiber battery hold down only does what it is supposed to, hold your batteries in place.

D.P.
__________________
www.powellracingcomponents.com
**Record setting carbon fiber**

Speedmerchant and TOP USA dealer.
DPowell is offline   Reply With Quote
Old 01-20-2004, 01:03 PM   #6208
Tech Elite
 
Join Date: Nov 2001
Location: SF Bay Area
Posts: 3,454
Trader Rating: 28 (100%+)
Default

So your saying that the strap down you sell for the ck/rev3 wont break?If that is true then sign me up.Otherwise the oring works just fine.
racenut123 is offline   Reply With Quote
Old 01-20-2004, 01:03 PM   #6209
Tech Elite
 
speedxl's Avatar
R/C Tech Charter Subscriber
 
Join Date: Jun 2003
Location: Portland Oregon.
Posts: 3,876
Default

adrian m i run a quad 12 and there is no warping of the chassis with the brace like an oring car and it does not waigh more then tape especially when i have to add about an ounce on my car to make waight so you could say that it equals out.
and by the way taping a batt in can cause the frame the warp also and if you bottom out the tape can snagg on the carpet.

the quad 12 is an awsome car .
__________________
Pemberton / R1 / All out motorsports / Team Power Push
speedxl is offline   Reply With Quote
Old 01-20-2004, 01:04 PM   #6210
Tech Elite
 
speedxl's Avatar
R/C Tech Charter Subscriber
 
Join Date: Jun 2003
Location: Portland Oregon.
Posts: 3,876
Default

adrian eres un come mierda y una socia!
__________________
Pemberton / R1 / All out motorsports / Team Power Push
speedxl is offline   Reply With Quote
Reply

Similar Threads
Thread Thread Starter Forum Replies Last Post
New to the forum mig rod Electric Off-Road 1 01-05-2008 05:23 PM
hi i need help and im new to the forum racer4 Rookie Zone 4 01-21-2007 02:37 PM
Why is this forum listed under the On Road Forum? sport10 Onroad Nitro Engine Zone 0 01-11-2007 08:06 AM
Forum Changes... futureal Wisconsin & Illinois Racing 3 10-28-2002 09:26 PM



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off



All times are GMT -7. It is currently 07:23 AM.


Powered By: vBulletin v3.9.2.1
Privacy Policy | Terms of Use | Advertise Content © 2001-2011 RCTech.net

SEO by vBSEO 3.5.0