R/C Tech Forums

Go Back   R/C Tech Forums > General Forums > Electric On-Road

    Hide Wikipost
Old 10-28-2016, 12:43 PM   -   Wikipost
R/C Tech Forums Thread Wiki: 1/12 forum
Please read: This is a community-maintained wiki post containing the most important information from this thread. You may edit the Wiki once you have been a member for 90 days and have made 90 posts.
 
Last edit by: fenton06
This is a place to share knowledge related to 1/12th scale racing. It is not to be used for conversations.

KITS:
Click links to go to manufacturer product page. If any are missing please add them!

TIRES:
Pre-mounted tires readily available in the US:
Pre-mounted tires readily available in the Europe:
  • Hot Race ??

Gluing your own donuts:
https://www.youtube.com/watch?v=hm7z1rz-74s - Special thanks to Edward Pickering!
Truing tires:
https://www.youtube.com/watch?v=8wqHOLWq6Uc - Special thanks to Edward Pickering!

The following information came from HERE, with some editing and information added. Thanks Christian!

THIS MAY NEED UPDATING FOR THE NEW BLACK CRC CARPET

Brands:
BSR, CRC, Jaco:
Pro One is no longer selling to the public, but it and the brands above are all mounted by BSR and use the same foam. The nomenclature of the BSR vs Jaco/CRC is a little different in a few instances but is otherwise the same. The BSR foam consists of three families, and can be identifed as synthetics, naturals, and blends.

Synthetics - The old school, light weight, easy to true "dry feeling" tires. These include tires like CRC/Jaco Yellow (BSR White), Black, Gray, etc. These tires offer the highest wear rate and lowest grip. Many racers continue to use these nder high bite conditions.

Naturals - These tires are usually the best alternative for low bite and asphalt. They include Pink, Magenta, Double Pink, Lilac (BSR Team Purple), Purple, and other tires. These tires provide a ton of grip, but tend to get sticky in high bite conditions. This rubber does not wear as easily, and the cars will pick up gunk and fibers from the carpet under most high bite conditions. This is especially bad if the humidity is high.

Blends - These are the tires most people run today. They were initially called "JFT foam" by some, as it was believed that the tires were the same as the JFT tires. We can divide the blends further into two groups: high rubber and low rubber content. The high rubber would be the new rear Orange and Red from the BSR family, and the low rubber would be the Green and Blue varieties. When, asked about the difference, John Foister from BSR Tires said they came from the same "family" of foam, but they offered different grip. According to John, the Green/Blue has more bite than Orange/Red, but from track testing Oranges offer more bite than Green (being equivalent to in hardness) when the grip is high and absolutely no grip when it is lower. The Orange foam has a denser pore structure and the tire is not as prone to chunking. It is also important to note is that BSR Blue rears are not the same as the BSR Blue fronts!

JFT:
JFT stands for Japan Foam Tire. They started the new wave of foam tires we are all using now (Blue/Blu, Green/Greene, Dbl Blue, etc). These tires are a little different than the BSR tire family, but work in very similar conditions. They offers four varieties A (asphalt), C (carpet), S (???), and R (???). This does not mean that those types only work on that surface, but this is what they recommend.

JFT uses the same foam for fronts and rears if the color is the same.

A: Used on asphalt, considered close to the natural rubber variety and are named consistently with other natural tires.
C: Used on carpet, considered a blend.
S: Used on carpet?, tires are ???
R: Used on carpet?, tires are ???

For setup, the JFT foam seem to generate more bite than the BSR, therefore the car tends to be a little more aggressive.

Ulti:
Ulti is another Japanese brand that offers an array of compounds. They have their own way of rating tires, and are difficult to equate to other brands. They have 4 different varieties, each in varying degrees of hardness.

J: High rubber content tire, similar to Pink/ Magenta. Soft would be close to a pink. These offer the most bite and are great for asphalt/carpet front tire. (J hard being very popular)
X: "Balanced" blend, similar to JFT Blue/ Green. Soft is equivalent to Green, medium to Blue in hardness. Great for carpet!
Y: High synthetic blend with lower grip, and is not a very popular variety.
Z: A very expensive "special" foam that is supposed to be magic on asphalt. Only make it in soft shore.
European tires:
There are many great European foam tire brands that use their own types of foam, as well as traditional foams. SOmeone with more knowledge about them will need to fill this in!

Tire Diameter:
If you are racing on carpet, you have to evaluate how much grip your track has. If your track is low to medium grip, you can run bigger tires. If you are on higher bite you have to cut them smaller, there is simply no way around it. Bigger tires are needed for asphalt, especially in the rear. The larger tires provide much needed lateral bite.

Carpet (mm):
Low - Medium Bite
Front: 42.0 - 42.5
Rear: 42.5 - 43.00
Medium - High Bite
Front: 40.5 - 41.0
Rear: 41.5 - 42.0
Big Race
Front: 39.5 - 40.0
Rear: 40.5 - 41.0
Asphalt (mm):
Parking Lot
Front: 43.0 - 44.0
Rear: 44.0 - 45.0
Prepped High Bite
Front: 42.0 - 43.0
Rear: 43.0 - 44.0

Tire Saucing:
Most facilities have moved towards odorless traction additives such as SXT. Some of additives evaporate very quickly and some do not. This seems to be something that is also dependent on tire compound and ambient temperature. For example, saucing a Green compound seems like it never dries, especially when tjhe temperature is lower. We have found that wiping the tires off 15 minutes before we go run allows the sauce to cure, which makes the car come in much quicker with Green rears. Blue compounds on the other hand, do fine when wiped off right before hitting the track.

Saucing half front and full rear is a good initial starting point. If the front of the car is too agressive you can sauce les than half, or for a shorter amount of time.
Tire Fuzzing:
In conditions of increasing grip, foam tires will somewtimes get sticky and pick up fuzz and debris from the track. This is highly dependent on the rubber sedan tire that is being run at your local track and the compound/ type of foam you are running on you car. The softer the sedan tire and the harder/higher rubber content in your foam tire, trouble with fuzzing seems more likely to occur.

There are ways to get around fuzzing under most conditions, and usually involves the selection of the correct foam compound. The more fuzz you get, the softer/lower rubber content you want to run.

Examples:
Problem: Car fuzzes with Lilac/Team Purple fronts and car starts pushing.
Solution: Use a softer front tire and or different family of foam. Replace it with Blue or Double Blue front.

Problem: Car loses rear bite 6 minutes into the run. Blue rear tires look almost clean but have small carpet hairs.
Solution: Use Green rear tires. The softer compound wears instead of getting sticky, minimizing fuzz.

Tire Selection:
Starting out, pick 2 tire compounds for the front and rear. The following should have you covered 99% of the time.

Front - Green and Blue (BSR) or Green and Light Blue (JFT)
Rear - Blue and Double Blue (BSR) or Blue and Dark Blue (JFT)

You may wonder about other compounds out there and if they might be better, trust me, they probably won't be. Even if there are other tires that can be as fast, the synthetic family wears out really fast and the high natural rubber will probably fuzz on you over an 8 minute run. The blends family seems to be the most versatile foam type available today. They last awhile, and sticking to them will make your process of tire selection simpler.
Tire Charts:
BSR/CRC/Jaco



Contact



Corally



JFT (Japan Foam Tire)



Ulti



Enneti (Xceed)



ELECTRONICS:
ESC:
As of now, ROAR is staying 1S (3.7V nominal; 4.2V fully charged) for 1/12. There are many 1S ESC's with a built in BEC so nothing else is required to power the receiver and servo.

If you don't want to lock yourself into a 1S specific ESC, you do have other options! It is possible to use your 2S ESC without a booster or receiver pack, and the ESC simply supplies the lower voltage. If that does not appeal to you, you will need to use an Rx pack or booster. The Rx pack and booster will both supply the receiver with a higher voltage than the 1S pack.

If you decide to use an Rx pack, MAKE SURE TO REMOVE THE RED WIRE FROM THE ESC PLUG THAT GOES INTO THE RECEIVER!!!

If you choose to use a voltage booster, it works exactly how it sounds. Instead of plugging the ESC into the receiver, it plugs into the booster, and the booster plug goes to the ESC, supplying the higher voltage.

1S ESC:
If there are any missing please add them!!

If anyone would like a need for a chart comparing the ESC's specs PM fenton06 and I'll get one made and put in here!
Voltage Boosters:
If there are any missing please add them!
Servos:
BODIES:
Black Art (CRC - US Dist):
  • Audi R8C - BA002 - .020 Thick



  • Black Market (Mohawk 12) - BA005 - .020



  • Lola B10 - BA006 - .020 thick
  • Toyota TS030 - BA008 - .020 thick

    Lola - black/red, TS030 - green/pink


PROTOForm:

Reflex Racing/RSD:

SUSPENSION ADJUSTMENTS:

Print Wikipost

Reply
 
Thread Tools Search this Thread
Old 09-22-2014, 06:01 PM   #41401
Tech Elite
 
Skiddins's Avatar
 
Join Date: Feb 2006
Location: Windsor, UK
Posts: 4,518
Default

Quote:
Originally Posted by andrewdoherty View Post
I'd like to hear others thoughts about the topic of wobbly wheels as well. Especially if the truer has been eliminated as a problem.
From what I've been told, it's the tightening of the screws into the rear wheels that usually causes it.
If the screws aren't evenly tight etc it can 'pinch' the plastic of the rim which can distort it slightly.

Zen Racing developed a rear axle to remove this problem. Dave Spashett helped design it.
The hubs have small 'lugs' that fit through the holes on the wheels and M2.5 screws that attach the wheels;



A review of it;
http://www.thercracer.com/2014/01/re...tive-lock.html
__________________
Xray T4'16, T4'14 (Wet Car)
Xray X12 2016
Xray X1'16
wlrc.co.uk (West London Racing Centre)
RD Disco
Skiddins is offline   Reply With Quote
Old 09-22-2014, 06:24 PM   #41402
Tech Elite
 
andrewdoherty's Avatar
 
Join Date: Jan 2005
Location: ★Wylie, TX★
Posts: 3,763
Trader Rating: 47 (100%+)
Default

Interesting...
__________________
"Whether you think you can, or think you can't, you're right." -Henry Ford
"[Driving] Genius is 1% inspiration, and 99% perspiration" -T.A. Edison
|◤Hobbywing◢|◤SpeedzoneUSA.com◢|◤Pro-One◢|
|◤ReflexRacing.net◢|◤Protoform◢|◤AVID R/C◢|
andrewdoherty is offline   Reply With Quote
Old 09-23-2014, 02:40 AM   #41403
Tech Elite
 
Skiddins's Avatar
 
Join Date: Feb 2006
Location: Windsor, UK
Posts: 4,518
Default

Quote:
Originally Posted by andrewdoherty View Post
Interesting...
I'll have it with me at the worlds if you want to take a look
__________________
Xray T4'16, T4'14 (Wet Car)
Xray X12 2016
Xray X1'16
wlrc.co.uk (West London Racing Centre)
RD Disco
Skiddins is offline   Reply With Quote
Old 09-23-2014, 04:28 AM   #41404
Tech Champion
 
Join Date: Nov 2001
Location: Hawaii, USA
Posts: 7,157
Default

That is why I like rim designs that have flat area where the screws go through...you can use a washer on rims like Ulti rims which help to keep from over torquing the screw and distorting the rim.
__________________
Apex RC
www.apexrc.com - Hawaii's #1 RC Proshop

Share & Like Our Page:https://www.facebook.com/ApexRCProshop
Win free stuff!
InspGadgt is offline   Reply With Quote
Old 09-23-2014, 05:14 AM   #41405
Tech Regular
 
Join Date: Jun 2013
Posts: 263
Trader Rating: 3 (100%+)
Default

For the guys in Australia:
1/12th scale clear out!!!
Andrew S is offline   Reply With Quote
Old 09-23-2014, 02:50 PM   #41406
Tech Fanatic
 
Join Date: Jun 2005
Posts: 900
Default

The 'wiggle' depends almost completely on the quality of the rim where it fits onto the shoulders of the drive hubs on the axle, and the tightening of the screws. I've never had a problem with any truer or arbor in getting a good round tyre because the arbor clamps down on a large flat area and the clamping nut does the same.

The Zen solution is very good because the part is well made, and the shoulders that fit into the holes in the wheel provide additional support and location that the simple shoulder in the middle of the hubs cannot provide.

My experience is that wheels from JFT and CRC are much better moulded than anything else, and the now-defunct Jaco rims were the worst in this respect. HTH
SlowerOne is offline   Reply With Quote
Old 09-23-2014, 03:42 PM   #41407
Tech Lord
 
wingracer's Avatar
 
Join Date: Nov 2007
Posts: 12,633
Trader Rating: 21 (100%+)
Default

Very neat piece, though probably completely unnecessary with CRC rims. Still I might have to give it a try sometime.
__________________
Sean. Certified speed crazed mowron.
Team Shepherd USA
www.ashfordhobby.com
wingracer is offline   Reply With Quote
Old 09-23-2014, 06:22 PM   #41408
Tech Master
 
BadSign's Avatar
 
Join Date: Feb 2002
Location: Franklin, IN
Posts: 1,144
Trader Rating: 15 (100%+)
Default

Can someone give me the dimensions of the crc's Audi r8c body? I need length and width.
__________________
This is the day the Lord has made, I will rejoice and be glad in it- Psalms 118:24

World Champion Turn Marshall
BadSign is offline   Reply With Quote
Old 09-24-2014, 08:27 AM   #41409
Tech Champion
 
RedBullFiXX's Avatar
R/C Tech Elite Subscriber
 
Join Date: Mar 2003
Location: Intergalactic Planetary
Posts: 6,539
Trader Rating: 34 (100%+)
Default

Looks ApexRC Pro has the Team Prime shocks again...
__________________
--> 12th scale Information Source <--

"Men do not quit playing because they grow old; they grow old because they quit playing."
― Oliver Wendell Holmes Jr.
RedBullFiXX is offline   Reply With Quote
Old 09-24-2014, 09:09 AM   #41410
Team EAM
 
EAMotorsports's Avatar
 
Join Date: Dec 2001
Location: Murfreesboro, TN
Posts: 8,862
Trader Rating: 73 (100%+)
Send a message via AIM to EAMotorsports
Default

The Team Prime shocks are pretty awesome. Only thing Ive found that work as good as a Hot bodies!

EA
__________________
Contact Us
Team EAM, Our Facebook
Xray | RCAmerica | Hudy | Apex RC | ProSpec America | Killer Concepts | AVID | Futaba.
EAMotorsports is offline   Reply With Quote
Old 09-24-2014, 10:35 AM   #41411
Tech Champion
 
Korey Harbke's Avatar
 
Join Date: Oct 2002
Location: Redmond, WA
Posts: 6,053
Trader Rating: 13 (100%+)
Default

Ordering now....

On another note, has anyone really done a back to back comparison of progressive (tapered) side springs and the straight coiled ones that are more linear by design?
__________________
Pro Spec America/Apex RC - Team ORCA - Awesomatix USA - Roche RC USA - AVID - Sweep - Protoform - Pro-One RC - Slapmaster Tools - Hebiki Design Works - Turtlemaster Racing - Seattle RC Racers - Timezone Hobbies
Korey Harbke is offline   Reply With Quote
Old 09-24-2014, 11:48 AM   #41412
Tech Elite
 
metalnut's Avatar
R/C Tech Elite Subscriber
 
Join Date: Feb 2013
Location: Seattle
Posts: 2,726
Trader Rating: 36 (100%+)
Default

Quote:
Originally Posted by EAMotorsports View Post
The Team Prime shocks are pretty awesome. Only thing Ive found that work as good as a Hot bodies!

EA
Do these fit standard AE springs?
__________________
Team Nervous | Team Scruffy | Team Orange

"If you ain't first, you're last!"
- Ricky Bobby
metalnut is offline   Reply With Quote
Old 09-24-2014, 11:50 AM   #41413
Tech Regular
 
DaveVera's Avatar
 
Join Date: Mar 2003
Location: Ft. Lauderdale,Fl
Posts: 317
Default

Quote:
Originally Posted by metalnut View Post
Do these fit standard AE springs?
Yes they do....
__________________
Motiv, Gravity RC, Discharge RC, Joe Conte Racing ,Blast RC Paint, Sanwa, #~MASAMI~ . ROAR#27050
DaveVera is offline   Reply With Quote
Old 09-24-2014, 02:25 PM   #41414
Tech Elite
 
DesertRat's Avatar
R/C Tech Elite Subscriber
 
Join Date: Mar 2011
Location: Sniffin the 'Sauce Fumes
Posts: 2,376
Trader Rating: 1 (100%+)
Default

Are they just a smoother shock or something?
__________________
I race toy cars for fun. If I need to explain, you'll never understand.
If everything is under control... go faster.
WTB: Carpet racing in Arizona.
It is obvious and intuitive to the most casual of observers that RC racing is better than golf.
DesertRat is offline   Reply With Quote
Old 09-24-2014, 03:59 PM   #41415
TLRacing
 
Frank Root's Avatar
R/C Tech Elite Subscriber
 
Join Date: Oct 2004
Location: Corona, CA, USA
Posts: 5,024
Trader Rating: 25 (100%+)
Default

I was looking for a Spektrum alternative to the JR Z3650 I've seen recommended quite a bit, and found a gem. The A5040 is nearly identical to the Z3650 in specs and dimensions. The two major differences, 0.34oz lighter (over 25%) and street price of $28 rather than $90. Check out the specs in the image below.

I have an A5040 going into my 1/12 this weekend, and I'll report back. I just need to add some weight to stay legal
Attached Thumbnails
1/12 forum-2014-09-24_145643.jpg  
__________________
Frank Root -- TLR Project Manager
Twitter - @FrankRoot FB - facebook.com/FrankRootTLR
Team Losi Racing (TLR) - Team Orion - Spektrum - JConcepts - Horizon Hobby - Stick It 1 - Sticky Kicks - Bradley's Fine Line Designs - liverc.com - OCRC Raceway - Tuning Haus - Pacific Coast Hobbies - RIP
Frank Root is offline   Reply With Quote
Reply

Similar Threads
Thread Thread Starter Forum Replies Last Post
New to the forum mig rod Electric Off-Road 1 01-05-2008 05:23 PM
hi i need help and im new to the forum racer4 Rookie Zone 4 01-21-2007 02:37 PM
Why is this forum listed under the On Road Forum? sport10 Onroad Nitro Engine Zone 0 01-11-2007 08:06 AM
Forum Changes... futureal Wisconsin & Illinois Racing 3 10-28-2002 09:26 PM



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off



All times are GMT -7. It is currently 09:32 PM.


Powered By: vBulletin v3.9.2.1
Privacy Policy | Terms of Use | Advertise Content © 2001-2011 RCTech.net

SEO by vBSEO 3.5.0