R/C Tech Forums

Go Back   R/C Tech Forums > General Forums > Electric On-Road

    Hide Wikipost
Old 10-28-2016, 12:43 PM   -   Wikipost
R/C Tech Forums Thread Wiki: 1/12 forum
Please read: This is a community-maintained wiki post containing the most important information from this thread. You may edit the Wiki once you have been a member for 90 days and have made 90 posts.
 
Last edit by: fenton06
This is a place to share knowledge related to 1/12th scale racing. It is not to be used for conversations.

KITS:
Click links to go to manufacturer product page. If any are missing please add them!

TIRES:
Pre-mounted tires readily available in the US:
Pre-mounted tires readily available in the Europe:
  • Hot Race ??

Gluing your own donuts:
https://www.youtube.com/watch?v=hm7z1rz-74s - Special thanks to Edward Pickering!
Truing tires:
https://www.youtube.com/watch?v=8wqHOLWq6Uc - Special thanks to Edward Pickering!

The following information came from HERE, with some editing and information added. Thanks Christian!

THIS MAY NEED UPDATING FOR THE NEW BLACK CRC CARPET

Brands:
BSR, CRC, Jaco:
Pro One is no longer selling to the public, but it and the brands above are all mounted by BSR and use the same foam. The nomenclature of the BSR vs Jaco/CRC is a little different in a few instances but is otherwise the same. The BSR foam consists of three families, and can be identifed as synthetics, naturals, and blends.

Synthetics - The old school, light weight, easy to true "dry feeling" tires. These include tires like CRC/Jaco Yellow (BSR White), Black, Gray, etc. These tires offer the highest wear rate and lowest grip. Many racers continue to use these nder high bite conditions.

Naturals - These tires are usually the best alternative for low bite and asphalt. They include Pink, Magenta, Double Pink, Lilac (BSR Team Purple), Purple, and other tires. These tires provide a ton of grip, but tend to get sticky in high bite conditions. This rubber does not wear as easily, and the cars will pick up gunk and fibers from the carpet under most high bite conditions. This is especially bad if the humidity is high.

Blends - These are the tires most people run today. They were initially called "JFT foam" by some, as it was believed that the tires were the same as the JFT tires. We can divide the blends further into two groups: high rubber and low rubber content. The high rubber would be the new rear Orange and Red from the BSR family, and the low rubber would be the Green and Blue varieties. When, asked about the difference, John Foister from BSR Tires said they came from the same "family" of foam, but they offered different grip. According to John, the Green/Blue has more bite than Orange/Red, but from track testing Oranges offer more bite than Green (being equivalent to in hardness) when the grip is high and absolutely no grip when it is lower. The Orange foam has a denser pore structure and the tire is not as prone to chunking. It is also important to note is that BSR Blue rears are not the same as the BSR Blue fronts!

JFT:
JFT stands for Japan Foam Tire. They started the new wave of foam tires we are all using now (Blue/Blu, Green/Greene, Dbl Blue, etc). These tires are a little different than the BSR tire family, but work in very similar conditions. They offers four varieties A (asphalt), C (carpet), S (???), and R (???). This does not mean that those types only work on that surface, but this is what they recommend.

JFT uses the same foam for fronts and rears if the color is the same.

A: Used on asphalt, considered close to the natural rubber variety and are named consistently with other natural tires.
C: Used on carpet, considered a blend.
S: Used on carpet?, tires are ???
R: Used on carpet?, tires are ???

For setup, the JFT foam seem to generate more bite than the BSR, therefore the car tends to be a little more aggressive.

Ulti:
Ulti is another Japanese brand that offers an array of compounds. They have their own way of rating tires, and are difficult to equate to other brands. They have 4 different varieties, each in varying degrees of hardness.

J: High rubber content tire, similar to Pink/ Magenta. Soft would be close to a pink. These offer the most bite and are great for asphalt/carpet front tire. (J hard being very popular)
X: "Balanced" blend, similar to JFT Blue/ Green. Soft is equivalent to Green, medium to Blue in hardness. Great for carpet!
Y: High synthetic blend with lower grip, and is not a very popular variety.
Z: A very expensive "special" foam that is supposed to be magic on asphalt. Only make it in soft shore.
European tires:
There are many great European foam tire brands that use their own types of foam, as well as traditional foams. SOmeone with more knowledge about them will need to fill this in!

Tire Diameter:
If you are racing on carpet, you have to evaluate how much grip your track has. If your track is low to medium grip, you can run bigger tires. If you are on higher bite you have to cut them smaller, there is simply no way around it. Bigger tires are needed for asphalt, especially in the rear. The larger tires provide much needed lateral bite.

Carpet (mm):
Low - Medium Bite
Front: 42.0 - 42.5
Rear: 42.5 - 43.00
Medium - High Bite
Front: 40.5 - 41.0
Rear: 41.5 - 42.0
Big Race
Front: 39.5 - 40.0
Rear: 40.5 - 41.0
Asphalt (mm):
Parking Lot
Front: 43.0 - 44.0
Rear: 44.0 - 45.0
Prepped High Bite
Front: 42.0 - 43.0
Rear: 43.0 - 44.0

Tire Saucing:
Most facilities have moved towards odorless traction additives such as SXT. Some of additives evaporate very quickly and some do not. This seems to be something that is also dependent on tire compound and ambient temperature. For example, saucing a Green compound seems like it never dries, especially when tjhe temperature is lower. We have found that wiping the tires off 15 minutes before we go run allows the sauce to cure, which makes the car come in much quicker with Green rears. Blue compounds on the other hand, do fine when wiped off right before hitting the track.

Saucing half front and full rear is a good initial starting point. If the front of the car is too agressive you can sauce les than half, or for a shorter amount of time.
Tire Fuzzing:
In conditions of increasing grip, foam tires will somewtimes get sticky and pick up fuzz and debris from the track. This is highly dependent on the rubber sedan tire that is being run at your local track and the compound/ type of foam you are running on you car. The softer the sedan tire and the harder/higher rubber content in your foam tire, trouble with fuzzing seems more likely to occur.

There are ways to get around fuzzing under most conditions, and usually involves the selection of the correct foam compound. The more fuzz you get, the softer/lower rubber content you want to run.

Examples:
Problem: Car fuzzes with Lilac/Team Purple fronts and car starts pushing.
Solution: Use a softer front tire and or different family of foam. Replace it with Blue or Double Blue front.

Problem: Car loses rear bite 6 minutes into the run. Blue rear tires look almost clean but have small carpet hairs.
Solution: Use Green rear tires. The softer compound wears instead of getting sticky, minimizing fuzz.

Tire Selection:
Starting out, pick 2 tire compounds for the front and rear. The following should have you covered 99% of the time.

Front - Green and Blue (BSR) or Green and Light Blue (JFT)
Rear - Blue and Double Blue (BSR) or Blue and Dark Blue (JFT)

You may wonder about other compounds out there and if they might be better, trust me, they probably won't be. Even if there are other tires that can be as fast, the synthetic family wears out really fast and the high natural rubber will probably fuzz on you over an 8 minute run. The blends family seems to be the most versatile foam type available today. They last awhile, and sticking to them will make your process of tire selection simpler.
Tire Charts:
BSR/CRC/Jaco



Contact



Corally



JFT (Japan Foam Tire)



Ulti



Enneti (Xceed)



ELECTRONICS:
ESC:
As of now, ROAR is staying 1S (3.7V nominal; 4.2V fully charged) for 1/12. There are many 1S ESC's with a built in BEC so nothing else is required to power the receiver and servo.

If you don't want to lock yourself into a 1S specific ESC, you do have other options! It is possible to use your 2S ESC without a booster or receiver pack, and the ESC simply supplies the lower voltage. If that does not appeal to you, you will need to use an Rx pack or booster. The Rx pack and booster will both supply the receiver with a higher voltage than the 1S pack.

If you decide to use an Rx pack, MAKE SURE TO REMOVE THE RED WIRE FROM THE ESC PLUG THAT GOES INTO THE RECEIVER!!!

If you choose to use a voltage booster, it works exactly how it sounds. Instead of plugging the ESC into the receiver, it plugs into the booster, and the booster plug goes to the ESC, supplying the higher voltage.

1S ESC:
If there are any missing please add them!!

If anyone would like a need for a chart comparing the ESC's specs PM fenton06 and I'll get one made and put in here!
Voltage Boosters:
If there are any missing please add them!
Servos:
BODIES:
Black Art (CRC - US Dist):
  • Audi R8C - BA002 - .020 Thick



  • Black Market (Mohawk 12) - BA005 - .020



  • Lola B10 - BA006 - .020 thick
  • Toyota TS030 - BA008 - .020 thick

    Lola - black/red, TS030 - green/pink


PROTOForm:

Reflex Racing/RSD:

SUSPENSION ADJUSTMENTS:

Print Wikipost

Reply
 
Thread Tools Search this Thread
Old 07-11-2014, 02:23 PM   #40921
Tech Regular
 
blwaz23's Avatar
 
Join Date: Nov 2012
Posts: 263
Default

Where is 1/12 scale most popular in the U.S?
blwaz23 is offline   Reply With Quote
Old 07-12-2014, 12:15 AM   #40922
Tech Master
 
TOADYY's Avatar
 
Join Date: Nov 2001
Location: SoCal
Posts: 1,178
Trader Rating: 5 (100%+)
Send a message via AIM to TOADYY
Default

Quote:
Originally Posted by idbdoug View Post
Awesomatix USA has RW 1/12 racing spurs in 70-72t 64p.
http://shop.awesomatixusa.com/rw-rac...spur-gear.html

Owner is a big 1/12 racer
idbdoug
Great! Thanks. Order has been placed.
__________________
Pro 10 / 10th scale pan GTP: Speed Merchant Road Kill 10 (one of the first 10 produced)
12th Scale: Speed Merchant Rev 8 PRO x2 and Yokomo YRX12

"Pro 10, the only way to fly around the track!"
TOADYY is offline   Reply With Quote
Old 07-12-2014, 04:51 AM   #40923
Tech Initiate
 
Join Date: Jun 2014
Posts: 29
Default

Hi everyone
I have a Serpent 120 ltx. We run on a medium traction asphalt track. I have two questions.
Lately I have been wondering if the latest xray, vbc or the yokomo r12 c3.1 would give me an advantage over my current car. What are your views?
Secondly we have a fast sweeper at the end of the straight. I have been trying to take it full tilt but the car pushes a little. Should I be trying to soften the front tires ( currently running 32 in front and 25 in the rear) or harden the rears or using set up to solve the problem. In some cases i can get it around at full throttle but some times it looks like the front end is bouncing.

Thanks

Marc
__________________
BD7 2014 mod, BD7 13.5, Serpent S120 ltx 10.5
marcvanderzon is offline   Reply With Quote
Old 07-12-2014, 07:53 AM   #40924
Tech Master
 
EDWARD2003's Avatar
 
Join Date: Jan 2003
Location: Kagoshima, Japan
Posts: 1,919
Trader Rating: 6 (100%+)
Default

Quote:
Originally Posted by marcvanderzon View Post
Hi everyone
I have a Serpent 120 ltx. We run on a medium traction asphalt track. I have two questions.
Lately I have been wondering if the latest xray, vbc or the yokomo r12 c3.1 would give me an advantage over my current car. What are your views?
Secondly we have a fast sweeper at the end of the straight. I have been trying to take it full tilt but the car pushes a little. Should I be trying to soften the front tires ( currently running 32 in front and 25 in the rear) or harden the rears or using set up to solve the problem. In some cases i can get it around at full throttle but some times it looks like the front end is bouncing.

Thanks

Marc
Do you mind posting your full setup? We can all take a look and give you some input. As for tires, I've learned to run the same tires front and rear.
EDWARD2003 is offline   Reply With Quote
Old 07-12-2014, 11:10 PM   #40925
Tech Champion
 
RedBullFiXX's Avatar
R/C Tech Elite Subscriber
 
Join Date: Mar 2003
Location: Intergalactic Planetary
Posts: 6,539
Trader Rating: 34 (100%+)
Cool

Quote:
Originally Posted by blwaz23 View Post
Where is 1/12 scale most popular in the U.S?
I'd say it's most popular in Vegas around October
__________________
--> 12th scale Information Source <--

"Men do not quit playing because they grow old; they grow old because they quit playing."
― Oliver Wendell Holmes Jr.
RedBullFiXX is offline   Reply With Quote
Old 07-12-2014, 11:35 PM   #40926
Tech Elite
 
DesertRat's Avatar
R/C Tech Elite Subscriber
 
Join Date: Mar 2011
Location: Sniffin the 'Sauce Fumes
Posts: 2,377
Trader Rating: 1 (100%+)
Default

Quote:
Originally Posted by RedBullFiXX View Post
I'd say it's most popular in Vegas around October
I heard they run five different classes of spec tire touring car at that race...
__________________
I race toy cars for fun. If I need to explain, you'll never understand.
If everything is under control... go faster.
WTB: Carpet racing in Arizona.
It is obvious and intuitive to the most casual of observers that RC racing is better than golf.
DesertRat is offline   Reply With Quote
Old 07-13-2014, 09:26 PM   #40927
Tech Regular
 
blwaz23's Avatar
 
Join Date: Nov 2012
Posts: 263
Default

Quote:
Originally Posted by RedBullFiXX View Post
I'd say it's most popular in Vegas around October
Do you know what part of the U.S it's popular all year round?
blwaz23 is offline   Reply With Quote
Old 07-13-2014, 09:33 PM   #40928
Tech Master
 
TOADYY's Avatar
 
Join Date: Nov 2001
Location: SoCal
Posts: 1,178
Trader Rating: 5 (100%+)
Send a message via AIM to TOADYY
Default

Quote:
Originally Posted by blwaz23 View Post
Do you know what part of the U.S it's popular all year round?
I can't speak for the entire U.S. but in SoCal we usual have at least 2 heats/mains of 12th scale at our local track (TQ RC Racing) year around.
__________________
Pro 10 / 10th scale pan GTP: Speed Merchant Road Kill 10 (one of the first 10 produced)
12th Scale: Speed Merchant Rev 8 PRO x2 and Yokomo YRX12

"Pro 10, the only way to fly around the track!"
TOADYY is offline   Reply With Quote
Old 07-13-2014, 09:40 PM   #40929
Tech Elite
 
metalnut's Avatar
R/C Tech Elite Subscriber
 
Join Date: Feb 2013
Location: Seattle
Posts: 2,726
Trader Rating: 36 (100%+)
Default

Up here in Seattle, we have a strong 12th scale showing every carpet race night. All nights have stock heats, some nights we even have modified heats. I would say anywhere from 4 to 8 entries is normal for our club, from what I've observed.
__________________
Team Nervous | Team Scruffy | Team Orange

"If you ain't first, you're last!"
- Ricky Bobby
metalnut is offline   Reply With Quote
Old 07-13-2014, 09:44 PM   #40930
Tech Elite
 
nashrcracer's Avatar
R/C Tech Charter Subscriber
 
Join Date: Nov 2001
Location: LA - Lower Antioch
Posts: 4,849
Trader Rating: 1 (100%+)
Default

Quote:
Originally Posted by blwaz23 View Post
Where is 1/12 scale most popular in the U.S?
Cleveland Ohio probably has the best following
__________________
RC50 As you come into this world, something else is also born. You begin your life, and it begins a journey towards you. It moves slowly, but it never stops. Wherever you go, whatever path you take, it will follow never faster, never slower, always coming. You will run, it will walk. You will rest, it will not. One day, you will linger in the same place too long you will sit too still, or sleep too deep. And when, too late, you rise to go, you will notice a second shadow next to yours. Your life will then be over.
nashrcracer is offline   Reply With Quote
Old 07-14-2014, 07:52 AM   #40931
Tech Master
 
Josh-n-ya's Avatar
 
Join Date: May 2011
Location: Alameda, CA
Posts: 1,991
Trader Rating: 70 (100%+)
Default

Quote:
Originally Posted by blwaz23 View Post
Do you know what part of the U.S it's popular all year round?
I can definitely say its not popular in Oakland (bay area).
Josh-n-ya is offline   Reply With Quote
Old 07-14-2014, 08:39 AM   #40932
Tech Master
 
patorz31's Avatar
 
Join Date: Nov 2007
Location: Edmonton Ab
Posts: 1,233
Default

I know its not the USA; but here in Edmonton Ab Canada, we get at least one 12 car heat every club night most nights we have 2 heats of 8-10 cars. It starting to come back, for running 1/12th will make you a better racer.
__________________
Northern Alberta Scale Car Auto Racers Pres. and Promotions
TEAM POWERS, RACE-OPT, SCHUMACHER RACING,VBC RACING
patorz31 is online now   Reply With Quote
Old 07-14-2014, 08:42 AM   #40933
Tech Master
 
tommy911t's Avatar
R/C Tech Elite Subscriber
 
Join Date: Feb 2011
Location: www.tuitebicyclerepair.com
Posts: 1,070
Trader Rating: 50 (100%+)
Default

Here in Portland, Oregon we just got a carpet track in the city limits. VTA and F1 are gaining huge following... I'm try to pursued the masses here that 12th could be great.
Has any club seen a big Tamiya 1/12 following?
__________________
Northwest Racing Calendar
My Bicycle Sales and Service Shop in PDX: Tuite Bicycle Repair
RC Blog:OnTheTone
tommy911t is offline   Reply With Quote
Old 07-14-2014, 12:12 PM   #40934
Tech Champion
 
RedBullFiXX's Avatar
R/C Tech Elite Subscriber
 
Join Date: Mar 2003
Location: Intergalactic Planetary
Posts: 6,539
Trader Rating: 34 (100%+)
Cool

Quote:
Originally Posted by tommy911t View Post
Here in Portland, Oregon we just got a carpet track in the city limits. VTA and F1 are gaining huge following... I'm try to pursued the masses here that 12th could be great.
Has any club seen a big Tamiya 1/12 following?
TQRC in SoCal have quite a few RM-01 racers
However they only run full Tamiya trim once a year at the TCS race

The RM-01X is quite competitive year round with standard wheels and body
__________________
--> 12th scale Information Source <--

"Men do not quit playing because they grow old; they grow old because they quit playing."
― Oliver Wendell Holmes Jr.
RedBullFiXX is offline   Reply With Quote
Old 07-14-2014, 01:18 PM   #40935
Tech Regular
 
jetnjme's Avatar
 
Join Date: Nov 2007
Location: Sacramento, CA
Posts: 371
Trader Rating: 2 (100%+)
Talking

here in Roseville, CA I am the only one. A wise man once told me "Run it, and they will come".
__________________
Northern California Pan Car Revival
jetnjme is offline   Reply With Quote
Reply

Similar Threads
Thread Thread Starter Forum Replies Last Post
New to the forum mig rod Electric Off-Road 1 01-05-2008 05:23 PM
hi i need help and im new to the forum racer4 Rookie Zone 4 01-21-2007 02:37 PM
Why is this forum listed under the On Road Forum? sport10 Onroad Nitro Engine Zone 0 01-11-2007 08:06 AM
Forum Changes... futureal Wisconsin & Illinois Racing 3 10-28-2002 09:26 PM



Currently Active Users Viewing This Thread: 3 (2 members and 1 guests)
KingEd
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off



All times are GMT -7. It is currently 11:45 AM.


Powered By: vBulletin v3.9.2.1
Privacy Policy | Terms of Use | Advertise Content © 2001-2011 RCTech.net

SEO by vBSEO 3.5.0