R/C Tech Forums

Go Back   R/C Tech Forums > General Forums > Electric On-Road

    Hide Wikipost
Old 10-28-2016, 12:43 PM   -   Wikipost
R/C Tech Forums Thread Wiki: 1/12 forum
Please read: This is a community-maintained wiki post containing the most important information from this thread. You may edit the Wiki once you have been a member for 90 days and have made 90 posts.
 
Last edit by: fenton06
This is a place to share knowledge related to 1/12th scale racing. It is not to be used for conversations.

KITS:
Click links to go to manufacturer product page. If any are missing please add them!

TIRES:
Pre-mounted tires readily available in the US:
Pre-mounted tires readily available in the Europe:
  • Hot Race ??

Gluing your own donuts:
https://www.youtube.com/watch?v=hm7z1rz-74s - Special thanks to Edward Pickering!
Truing tires:
https://www.youtube.com/watch?v=8wqHOLWq6Uc - Special thanks to Edward Pickering!

The following information came from HERE, with some editing and information added. Thanks Christian!

THIS MAY NEED UPDATING FOR THE NEW BLACK CRC CARPET

Brands:
BSR, CRC, Jaco:
Pro One is no longer selling to the public, but it and the brands above are all mounted by BSR and use the same foam. The nomenclature of the BSR vs Jaco/CRC is a little different in a few instances but is otherwise the same. The BSR foam consists of three families, and can be identifed as synthetics, naturals, and blends.

Synthetics - The old school, light weight, easy to true "dry feeling" tires. These include tires like CRC/Jaco Yellow (BSR White), Black, Gray, etc. These tires offer the highest wear rate and lowest grip. Many racers continue to use these nder high bite conditions.

Naturals - These tires are usually the best alternative for low bite and asphalt. They include Pink, Magenta, Double Pink, Lilac (BSR Team Purple), Purple, and other tires. These tires provide a ton of grip, but tend to get sticky in high bite conditions. This rubber does not wear as easily, and the cars will pick up gunk and fibers from the carpet under most high bite conditions. This is especially bad if the humidity is high.

Blends - These are the tires most people run today. They were initially called "JFT foam" by some, as it was believed that the tires were the same as the JFT tires. We can divide the blends further into two groups: high rubber and low rubber content. The high rubber would be the new rear Orange and Red from the BSR family, and the low rubber would be the Green and Blue varieties. When, asked about the difference, John Foister from BSR Tires said they came from the same "family" of foam, but they offered different grip. According to John, the Green/Blue has more bite than Orange/Red, but from track testing Oranges offer more bite than Green (being equivalent to in hardness) when the grip is high and absolutely no grip when it is lower. The Orange foam has a denser pore structure and the tire is not as prone to chunking. It is also important to note is that BSR Blue rears are not the same as the BSR Blue fronts!

JFT:
JFT stands for Japan Foam Tire. They started the new wave of foam tires we are all using now (Blue/Blu, Green/Greene, Dbl Blue, etc). These tires are a little different than the BSR tire family, but work in very similar conditions. They offers four varieties A (asphalt), C (carpet), S (???), and R (???). This does not mean that those types only work on that surface, but this is what they recommend.

JFT uses the same foam for fronts and rears if the color is the same.

A: Used on asphalt, considered close to the natural rubber variety and are named consistently with other natural tires.
C: Used on carpet, considered a blend.
S: Used on carpet?, tires are ???
R: Used on carpet?, tires are ???

For setup, the JFT foam seem to generate more bite than the BSR, therefore the car tends to be a little more aggressive.

Ulti:
Ulti is another Japanese brand that offers an array of compounds. They have their own way of rating tires, and are difficult to equate to other brands. They have 4 different varieties, each in varying degrees of hardness.

J: High rubber content tire, similar to Pink/ Magenta. Soft would be close to a pink. These offer the most bite and are great for asphalt/carpet front tire. (J hard being very popular)
X: "Balanced" blend, similar to JFT Blue/ Green. Soft is equivalent to Green, medium to Blue in hardness. Great for carpet!
Y: High synthetic blend with lower grip, and is not a very popular variety.
Z: A very expensive "special" foam that is supposed to be magic on asphalt. Only make it in soft shore.
European tires:
There are many great European foam tire brands that use their own types of foam, as well as traditional foams. SOmeone with more knowledge about them will need to fill this in!

Tire Diameter:
If you are racing on carpet, you have to evaluate how much grip your track has. If your track is low to medium grip, you can run bigger tires. If you are on higher bite you have to cut them smaller, there is simply no way around it. Bigger tires are needed for asphalt, especially in the rear. The larger tires provide much needed lateral bite.

Carpet (mm):
Low - Medium Bite
Front: 42.0 - 42.5
Rear: 42.5 - 43.00
Medium - High Bite
Front: 40.5 - 41.0
Rear: 41.5 - 42.0
Big Race
Front: 39.5 - 40.0
Rear: 40.5 - 41.0
Asphalt (mm):
Parking Lot
Front: 43.0 - 44.0
Rear: 44.0 - 45.0
Prepped High Bite
Front: 42.0 - 43.0
Rear: 43.0 - 44.0

Tire Saucing:
Most facilities have moved towards odorless traction additives such as SXT. Some of additives evaporate very quickly and some do not. This seems to be something that is also dependent on tire compound and ambient temperature. For example, saucing a Green compound seems like it never dries, especially when tjhe temperature is lower. We have found that wiping the tires off 15 minutes before we go run allows the sauce to cure, which makes the car come in much quicker with Green rears. Blue compounds on the other hand, do fine when wiped off right before hitting the track.

Saucing half front and full rear is a good initial starting point. If the front of the car is too agressive you can sauce les than half, or for a shorter amount of time.
Tire Fuzzing:
In conditions of increasing grip, foam tires will somewtimes get sticky and pick up fuzz and debris from the track. This is highly dependent on the rubber sedan tire that is being run at your local track and the compound/ type of foam you are running on you car. The softer the sedan tire and the harder/higher rubber content in your foam tire, trouble with fuzzing seems more likely to occur.

There are ways to get around fuzzing under most conditions, and usually involves the selection of the correct foam compound. The more fuzz you get, the softer/lower rubber content you want to run.

Examples:
Problem: Car fuzzes with Lilac/Team Purple fronts and car starts pushing.
Solution: Use a softer front tire and or different family of foam. Replace it with Blue or Double Blue front.

Problem: Car loses rear bite 6 minutes into the run. Blue rear tires look almost clean but have small carpet hairs.
Solution: Use Green rear tires. The softer compound wears instead of getting sticky, minimizing fuzz.

Tire Selection:
Starting out, pick 2 tire compounds for the front and rear. The following should have you covered 99% of the time.

Front - Green and Blue (BSR) or Green and Light Blue (JFT)
Rear - Blue and Double Blue (BSR) or Blue and Dark Blue (JFT)

You may wonder about other compounds out there and if they might be better, trust me, they probably won't be. Even if there are other tires that can be as fast, the synthetic family wears out really fast and the high natural rubber will probably fuzz on you over an 8 minute run. The blends family seems to be the most versatile foam type available today. They last awhile, and sticking to them will make your process of tire selection simpler.
Tire Charts:
BSR/CRC/Jaco



Contact



Corally



JFT (Japan Foam Tire)



Ulti



Enneti (Xceed)



ELECTRONICS:
ESC:
As of now, ROAR is staying 1S (3.7V nominal; 4.2V fully charged) for 1/12. There are many 1S ESC's with a built in BEC so nothing else is required to power the receiver and servo.

If you don't want to lock yourself into a 1S specific ESC, you do have other options! It is possible to use your 2S ESC without a booster or receiver pack, and the ESC simply supplies the lower voltage. If that does not appeal to you, you will need to use an Rx pack or booster. The Rx pack and booster will both supply the receiver with a higher voltage than the 1S pack.

If you decide to use an Rx pack, MAKE SURE TO REMOVE THE RED WIRE FROM THE ESC PLUG THAT GOES INTO THE RECEIVER!!!

If you choose to use a voltage booster, it works exactly how it sounds. Instead of plugging the ESC into the receiver, it plugs into the booster, and the booster plug goes to the ESC, supplying the higher voltage.

1S ESC:
If there are any missing please add them!!

If anyone would like a need for a chart comparing the ESC's specs PM fenton06 and I'll get one made and put in here!
Voltage Boosters:
If there are any missing please add them!
Servos:
BODIES:
Black Art (CRC - US Dist):
  • Audi R8C - BA002 - .020 Thick



  • Black Market (Mohawk 12) - BA005 - .020



  • Lola B10 - BA006 - .020 thick
  • Toyota TS030 - BA008 - .020 thick

    Lola - black/red, TS030 - green/pink


PROTOForm:

Reflex Racing/RSD:

SUSPENSION ADJUSTMENTS:

Print Wikipost

Reply
 
Thread Tools Search this Thread
Old 12-19-2012, 10:41 AM   #38806
Moderator
 
Clegg's Avatar
 
Join Date: Jan 2004
Location: Outside doing things in places... Denver, CO
Posts: 4,601
Trader Rating: 8 (100%+)
Default

I really like the Enetti rims, super light and they are just flexible enough not to shatter like fine china like I've found the CRCs to do if you have a strong hit to the front and the wheel contacts the steering arm.

I've found the foam to be OK in the firmer ranges, but their softer Pink/Magenta compounds leave a bit to be desired on our carpet at least. I've also found their wheels to be inconsistent when it comes to quality of the glue job, roundness of the rim, and overall foam placement. The enetti foam in the natural rubber range seems to be 2 shore softer than the CRC/Jaco ranges.
__________________
Joe Kelly - JK720.net
5280 Raceway |5280raceway.com | 5280 Raceway Facebook
Clegg is offline   Reply With Quote
Old 12-19-2012, 12:30 PM   #38807
Tech Champion
 
RedBullFiXX's Avatar
R/C Tech Elite Subscriber
 
Join Date: Mar 2003
Location: Intergalactic Planetary
Posts: 6,539
Trader Rating: 34 (100%+)
Default

Quote:
Originally Posted by mike ivy View Post
Hey Dave,

I have the same results I really like these tires got to run them a few weeks Back.Rob at KO was very helpful with the tire info. There very consistent and the offset are close to the jaco's
Yes
Good stuff
Very happy Rob agreed to import these
__________________
--> 12th scale Information Source <--

"Men do not quit playing because they grow old; they grow old because they quit playing."
― Oliver Wendell Holmes Jr.
RedBullFiXX is offline   Reply With Quote
Old 12-19-2012, 05:04 PM   #38808
Tech Initiate
 
Join Date: Aug 2005
Posts: 35
Default

hey guys i just got my son a gen xi. when i tried to install one of my nano-tech 1 cell it wouldnt fit. the battery was to wide, battery measures 93.7mm and where the battery goes is the car measures 93mm, would it be ok to file the left and right plates so the battery will fit, thanks guys
bkdent is offline   Reply With Quote
Old 12-20-2012, 12:10 AM   #38809
Tech Master
 
CanyonCarverR1's Avatar
 
Join Date: Jan 2008
Location: NorCal
Posts: 1,340
Trader Rating: 13 (100%+)
Default

Getting ready to update my CRC GenXL for outdoor asphalt. What would be the best version? I was thinking the Altered Ego?
CanyonCarverR1 is offline   Reply With Quote
Old 12-20-2012, 08:04 AM   #38810
Tech Master
R/C Tech Elite Subscriber
 
Join Date: Oct 2008
Location: Grand Portage, MN
Posts: 1,362
Trader Rating: 39 (100%+)
Default

I am still running my old Gex X and still winning. I'm racing against brand new xti's serpents and associated cars with no issues. as for feel the alter ego will be more like your old car than the new xti.
__________________
______________________________________________
Jason Deadman

I race toy cars for fun. If I need to explain, you'll never understand.
jdeadman is offline   Reply With Quote
Old 12-20-2012, 10:28 AM   #38811
Tech Champion
 
AdrianM's Avatar
 
Join Date: Aug 2001
Location: Tampa, FL
Posts: 5,914
Trader Rating: 4 (100%+)
Default

My new 12R5.2. Still waiting for a few bits....speedo, tires, body.
Attached Thumbnails
1/12 forum-img_1632.jpg   1/12 forum-img_1634.jpg  
__________________
Adrian Martinez
What I run: Schumacher Mi5/Associated RC10R5.1/Associated RC12R5.2/Futaba/HobbyWing/Team EA Motorsports/BSR Racing
Where I run: Florida Indoor R/C Complex/Thunder Racing/Florida On Road State Series
AdrianM is offline   Reply With Quote
Old 12-20-2012, 02:17 PM   #38812
Tech Adept
 
Join Date: Dec 2011
Location: Colorado
Posts: 192
Default

Quote:
Originally Posted by AdrianM View Post
My new 12R5.2. Still waiting for a few bits....speedo, tires, body.
Looks nice a clean
brushless55 is offline   Reply With Quote
Old 12-20-2012, 07:26 PM   #38813
Tech Regular
 
evirobs's Avatar
 
Join Date: Sep 2006
Posts: 311
Trader Rating: 1 (100%+)
Default

Quote:
Originally Posted by LloydLoar View Post
Thanks Julius, I appreciate the help. The website is a little "engrish" so I couldn't quite understand what compounds were for what and how they might translate to Jaco/CRC, so I figured I would just start trying random compounds! Thanks for the help!
Try with the X compound for carpet first.

General compound guide -
X - For Carpet
J - For Asphalt
Z - For Carpet (More rubber content than X)

For guys running on bumpy asphalt track, you may want larger size tires.
Please check with your distributor for availability.
We have J compound available with 48mm front & 50mm Rear.
__________________
*************My toYs arE DriVing mE CrAzY!!*************
evirobs is offline   Reply With Quote
Old 12-20-2012, 07:50 PM   #38814
Tech Fanatic
 
BCbud's Avatar
R/C Tech Elite Subscriber
 
Join Date: Sep 2009
Location: Victoria BC Canada
Posts: 755
Trader Rating: 37 (100%+)
Default

Quote:
Originally Posted by bkdent View Post
hey guys i just got my son a gen xi. when i tried to install one of my nano-tech 1 cell it wouldnt fit. the battery was to wide, battery measures 93.7mm and where the battery goes is the car measures 93mm, would it be ok to file the left and right plates so the battery will fit, thanks guys
I have the XI and my nano-tech A-spec 6.0 fits with room to spare. What Turnigy battery are you using?

Edit: They also fit in my Gen-x.
__________________
Xray NT1 - Xray T4 2013 TC - Xray T4 2013 VTA - CRCgenX10 - CRCgenX - CRCgenXi - Slash 4X4 with LCG conversion -Associated RC8Be - Xray XB4 - DX3R PRO
Recycled teenager.
www.irocc.ca ; www.corvictoria.com ; http://www.wcics.ca/
I will not send Pay Pal as a gift or add fees to the price so DO NOT ASK!
BCbud is offline   Reply With Quote
Old 12-20-2012, 07:56 PM   #38815
Tech Fanatic
 
BCbud's Avatar
R/C Tech Elite Subscriber
 
Join Date: Sep 2009
Location: Victoria BC Canada
Posts: 755
Trader Rating: 37 (100%+)
Default

Quote:
Originally Posted by CanyonCarverR1 View Post
Getting ready to update my CRC GenXL for outdoor asphalt. What would be the best version? I was thinking the Altered Ego?
IMO I would stay with what you have now. The new car(s) are still going through ther growing pains.
__________________
Xray NT1 - Xray T4 2013 TC - Xray T4 2013 VTA - CRCgenX10 - CRCgenX - CRCgenXi - Slash 4X4 with LCG conversion -Associated RC8Be - Xray XB4 - DX3R PRO
Recycled teenager.
www.irocc.ca ; www.corvictoria.com ; http://www.wcics.ca/
I will not send Pay Pal as a gift or add fees to the price so DO NOT ASK!
BCbud is offline   Reply With Quote
Old 12-20-2012, 09:19 PM   #38816
Tech Regular
 
Bikerbob's Avatar
 
Join Date: Jan 2006
Location: Ontario, Canada
Posts: 453
Trader Rating: 11 (100%+)
Send a message via ICQ to Bikerbob Send a message via MSN to Bikerbob Send a message via Yahoo to Bikerbob
Default

Hey people picked up a couple of these in 17.5t look great but I have not bullet connectors on mine, everywhere I look I see pics of these motors with special bullet connectors like this..


I need these, I cant fit the motor in my rear 1/12 pod with std connectors.. any idea where I can get them???

The speed passion site does not even mention them.
Bikerbob is offline   Reply With Quote
Old 12-20-2012, 09:35 PM   #38817
Tech Master
 
jsinclair's Avatar
 
Join Date: Jul 2011
Location: rice lake, wi
Posts: 1,036
Trader Rating: 3 (100%+)
Default

http://www.speedpassion.net/us/produ...p=162820&c=OPT

Bam
jsinclair is offline   Reply With Quote
Old 12-20-2012, 10:36 PM   #38818
Tech Initiate
 
Join Date: Aug 2005
Posts: 35
Default

im using the turnigy nano-tech 5600 mah
bkdent is offline   Reply With Quote
Old 12-20-2012, 11:06 PM   #38819
Tech Elite
 
DesertRat's Avatar
R/C Tech Elite Subscriber
 
Join Date: Mar 2011
Location: Sniffin the 'Sauce Fumes
Posts: 2,377
Trader Rating: 1 (100%+)
Default

File the car, not the battery
__________________
I race toy cars for fun. If I need to explain, you'll never understand.
If everything is under control... go faster.
WTB: Carpet racing in Arizona.
It is obvious and intuitive to the most casual of observers that RC racing is better than golf.
DesertRat is offline   Reply With Quote
Old 12-21-2012, 12:06 AM   #38820
Tech Fanatic
 
BCbud's Avatar
R/C Tech Elite Subscriber
 
Join Date: Sep 2009
Location: Victoria BC Canada
Posts: 755
Trader Rating: 37 (100%+)
Default

Quote:
Originally Posted by bkdent View Post
im using the turnigy nano-tech 5600 mah
It would be ok to file a little bit. If it is a used car I would check to see if the mounting posts or the screws that hold them are not bent. Also try lossing the 4 screws per side and then re-tighten them.
__________________
Xray NT1 - Xray T4 2013 TC - Xray T4 2013 VTA - CRCgenX10 - CRCgenX - CRCgenXi - Slash 4X4 with LCG conversion -Associated RC8Be - Xray XB4 - DX3R PRO
Recycled teenager.
www.irocc.ca ; www.corvictoria.com ; http://www.wcics.ca/
I will not send Pay Pal as a gift or add fees to the price so DO NOT ASK!
BCbud is offline   Reply With Quote
Reply

Similar Threads
Thread Thread Starter Forum Replies Last Post
New to the forum mig rod Electric Off-Road 1 01-05-2008 05:23 PM
hi i need help and im new to the forum racer4 Rookie Zone 4 01-21-2007 02:37 PM
Why is this forum listed under the On Road Forum? sport10 Onroad Nitro Engine Zone 0 01-11-2007 08:06 AM
Forum Changes... futureal Wisconsin & Illinois Racing 3 10-28-2002 09:26 PM



Currently Active Users Viewing This Thread: 3 (0 members and 3 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off



All times are GMT -7. It is currently 11:26 AM.


Powered By: vBulletin v3.9.2.1
Privacy Policy | Terms of Use | Advertise Content © 2001-2011 RCTech.net

SEO by vBSEO 3.5.0