R/C Tech Forums

Go Back   R/C Tech Forums > General Forums > Electric On-Road

    Hide Wikipost
Old 10-28-2016, 12:43 PM   -   Wikipost
R/C Tech Forums Thread Wiki: 1/12 forum
Please read: This is a community-maintained wiki post containing the most important information from this thread. You may edit the Wiki once you have been a member for 90 days and have made 90 posts.
 
Last edit by: fenton06
This is a place to share knowledge related to 1/12th scale racing. It is not to be used for conversations.

KITS:
Click links to go to manufacturer product page. If any are missing please add them!

TIRES:
Pre-mounted tires readily available in the US:
Pre-mounted tires readily available in the Europe:
  • Hot Race ??

Gluing your own donuts:
https://www.youtube.com/watch?v=hm7z1rz-74s - Special thanks to Edward Pickering!
Truing tires:
https://www.youtube.com/watch?v=8wqHOLWq6Uc - Special thanks to Edward Pickering!

The following information came from HERE, with some editing and information added. Thanks Christian!

THIS MAY NEED UPDATING FOR THE NEW BLACK CRC CARPET

Brands:
BSR, CRC, Jaco:
Pro One is no longer selling to the public, but it and the brands above are all mounted by BSR and use the same foam. The nomenclature of the BSR vs Jaco/CRC is a little different in a few instances but is otherwise the same. The BSR foam consists of three families, and can be identifed as synthetics, naturals, and blends.

Synthetics - The old school, light weight, easy to true "dry feeling" tires. These include tires like CRC/Jaco Yellow (BSR White), Black, Gray, etc. These tires offer the highest wear rate and lowest grip. Many racers continue to use these nder high bite conditions.

Naturals - These tires are usually the best alternative for low bite and asphalt. They include Pink, Magenta, Double Pink, Lilac (BSR Team Purple), Purple, and other tires. These tires provide a ton of grip, but tend to get sticky in high bite conditions. This rubber does not wear as easily, and the cars will pick up gunk and fibers from the carpet under most high bite conditions. This is especially bad if the humidity is high.

Blends - These are the tires most people run today. They were initially called "JFT foam" by some, as it was believed that the tires were the same as the JFT tires. We can divide the blends further into two groups: high rubber and low rubber content. The high rubber would be the new rear Orange and Red from the BSR family, and the low rubber would be the Green and Blue varieties. When, asked about the difference, John Foister from BSR Tires said they came from the same "family" of foam, but they offered different grip. According to John, the Green/Blue has more bite than Orange/Red, but from track testing Oranges offer more bite than Green (being equivalent to in hardness) when the grip is high and absolutely no grip when it is lower. The Orange foam has a denser pore structure and the tire is not as prone to chunking. It is also important to note is that BSR Blue rears are not the same as the BSR Blue fronts!

JFT:
JFT stands for Japan Foam Tire. They started the new wave of foam tires we are all using now (Blue/Blu, Green/Greene, Dbl Blue, etc). These tires are a little different than the BSR tire family, but work in very similar conditions. They offers four varieties A (asphalt), C (carpet), S (???), and R (???). This does not mean that those types only work on that surface, but this is what they recommend.

JFT uses the same foam for fronts and rears if the color is the same.

A: Used on asphalt, considered close to the natural rubber variety and are named consistently with other natural tires.
C: Used on carpet, considered a blend.
S: Used on carpet?, tires are ???
R: Used on carpet?, tires are ???

For setup, the JFT foam seem to generate more bite than the BSR, therefore the car tends to be a little more aggressive.

Ulti:
Ulti is another Japanese brand that offers an array of compounds. They have their own way of rating tires, and are difficult to equate to other brands. They have 4 different varieties, each in varying degrees of hardness.

J: High rubber content tire, similar to Pink/ Magenta. Soft would be close to a pink. These offer the most bite and are great for asphalt/carpet front tire. (J hard being very popular)
X: "Balanced" blend, similar to JFT Blue/ Green. Soft is equivalent to Green, medium to Blue in hardness. Great for carpet!
Y: High synthetic blend with lower grip, and is not a very popular variety.
Z: A very expensive "special" foam that is supposed to be magic on asphalt. Only make it in soft shore.
European tires:
There are many great European foam tire brands that use their own types of foam, as well as traditional foams. SOmeone with more knowledge about them will need to fill this in!

Tire Diameter:
If you are racing on carpet, you have to evaluate how much grip your track has. If your track is low to medium grip, you can run bigger tires. If you are on higher bite you have to cut them smaller, there is simply no way around it. Bigger tires are needed for asphalt, especially in the rear. The larger tires provide much needed lateral bite.

Carpet (mm):
Low - Medium Bite
Front: 42.0 - 42.5
Rear: 42.5 - 43.00
Medium - High Bite
Front: 40.5 - 41.0
Rear: 41.5 - 42.0
Big Race
Front: 39.5 - 40.0
Rear: 40.5 - 41.0
Asphalt (mm):
Parking Lot
Front: 43.0 - 44.0
Rear: 44.0 - 45.0
Prepped High Bite
Front: 42.0 - 43.0
Rear: 43.0 - 44.0

Tire Saucing:
Most facilities have moved towards odorless traction additives such as SXT. Some of additives evaporate very quickly and some do not. This seems to be something that is also dependent on tire compound and ambient temperature. For example, saucing a Green compound seems like it never dries, especially when tjhe temperature is lower. We have found that wiping the tires off 15 minutes before we go run allows the sauce to cure, which makes the car come in much quicker with Green rears. Blue compounds on the other hand, do fine when wiped off right before hitting the track.

Saucing half front and full rear is a good initial starting point. If the front of the car is too agressive you can sauce les than half, or for a shorter amount of time.
Tire Fuzzing:
In conditions of increasing grip, foam tires will somewtimes get sticky and pick up fuzz and debris from the track. This is highly dependent on the rubber sedan tire that is being run at your local track and the compound/ type of foam you are running on you car. The softer the sedan tire and the harder/higher rubber content in your foam tire, trouble with fuzzing seems more likely to occur.

There are ways to get around fuzzing under most conditions, and usually involves the selection of the correct foam compound. The more fuzz you get, the softer/lower rubber content you want to run.

Examples:
Problem: Car fuzzes with Lilac/Team Purple fronts and car starts pushing.
Solution: Use a softer front tire and or different family of foam. Replace it with Blue or Double Blue front.

Problem: Car loses rear bite 6 minutes into the run. Blue rear tires look almost clean but have small carpet hairs.
Solution: Use Green rear tires. The softer compound wears instead of getting sticky, minimizing fuzz.

Tire Selection:
Starting out, pick 2 tire compounds for the front and rear. The following should have you covered 99% of the time.

Front - Green and Blue (BSR) or Green and Light Blue (JFT)
Rear - Blue and Double Blue (BSR) or Blue and Dark Blue (JFT)

You may wonder about other compounds out there and if they might be better, trust me, they probably won't be. Even if there are other tires that can be as fast, the synthetic family wears out really fast and the high natural rubber will probably fuzz on you over an 8 minute run. The blends family seems to be the most versatile foam type available today. They last awhile, and sticking to them will make your process of tire selection simpler.
Tire Charts:
BSR/CRC/Jaco



Contact



Corally



JFT (Japan Foam Tire)



Ulti



Enneti (Xceed)



ELECTRONICS:
ESC:
As of now, ROAR is staying 1S (3.7V nominal; 4.2V fully charged) for 1/12. There are many 1S ESC's with a built in BEC so nothing else is required to power the receiver and servo.

If you don't want to lock yourself into a 1S specific ESC, you do have other options! It is possible to use your 2S ESC without a booster or receiver pack, and the ESC simply supplies the lower voltage. If that does not appeal to you, you will need to use an Rx pack or booster. The Rx pack and booster will both supply the receiver with a higher voltage than the 1S pack.

If you decide to use an Rx pack, MAKE SURE TO REMOVE THE RED WIRE FROM THE ESC PLUG THAT GOES INTO THE RECEIVER!!!

If you choose to use a voltage booster, it works exactly how it sounds. Instead of plugging the ESC into the receiver, it plugs into the booster, and the booster plug goes to the ESC, supplying the higher voltage.

1S ESC:
If there are any missing please add them!!

If anyone would like a need for a chart comparing the ESC's specs PM fenton06 and I'll get one made and put in here!
Voltage Boosters:
If there are any missing please add them!
Servos:
BODIES:
Black Art (CRC - US Dist):
  • Audi R8C - BA002 - .020 Thick



  • Black Market (Mohawk 12) - BA005 - .020



  • Lola B10 - BA006 - .020 thick
  • Toyota TS030 - BA008 - .020 thick

    Lola - black/red, TS030 - green/pink


PROTOForm:

Reflex Racing/RSD:

SUSPENSION ADJUSTMENTS:

Print Wikipost

Reply
 
Thread Tools Search this Thread
Old 11-26-2012, 05:51 PM   #38641
Tech Champion
 
RedBullFiXX's Avatar
R/C Tech Elite Subscriber
 
Join Date: Mar 2003
Location: Intergalactic Planetary
Posts: 6,539
Trader Rating: 34 (100%+)
Cool

I go with 16g for all wires 1s blinky related

New RM-01 coming...

__________________
--> 12th scale Information Source <--

"Men do not quit playing because they grow old; they grow old because they quit playing."
― Oliver Wendell Holmes Jr.
RedBullFiXX is offline   Reply With Quote
Old 11-26-2012, 07:07 PM   #38642
Tech Master
R/C Tech Elite Subscriber
 
Join Date: Oct 2008
Location: Grand Portage, MN
Posts: 1,362
Trader Rating: 39 (100%+)
Default

I run 18 Gauge for the Motor and 16 for the battery wires
__________________
______________________________________________
Jason Deadman

I race toy cars for fun. If I need to explain, you'll never understand.
jdeadman is offline   Reply With Quote
Old 11-26-2012, 07:16 PM   #38643
Tech Adept
 
Join Date: Apr 2010
Posts: 167
Default

Quote:
Originally Posted by wingman2 View Post
I like this, but how the rear pod to mains ? T-bar or link or other new idea ?
Wish to see this via photos.....
mos-leung is offline   Reply With Quote
Old 11-27-2012, 04:04 AM   #38644
Tech Champion
 
Radio Active's Avatar
 
Join Date: Jun 2003
Location: Newcastle, Australia
Posts: 6,995
Trader Rating: 2 (100%+)
Default

Quote:
Originally Posted by wingman2 View Post
Do you find that the centre damping is strong enough, if so what weight grease are you using? I was using a similar damper tube as a single side-damper with 100,000 wt and the damping was too weak.
__________________
Reigning NSW 4WD Group 20 Champion
Member: Maitland Radio Car Club (http://www.morcc.com.au)
twitter: @dvcotton
Australian 12th Scale hastag: #EP12AU
Radio Active is offline   Reply With Quote
Old 11-27-2012, 04:14 AM   #38645
Tech Master
 
dontfeelcold's Avatar
 
Join Date: Aug 2003
Location: Where there's smoke there's a tyre
Posts: 1,722
Trader Rating: 20 (100%+)
Default

All the recommendations (I have found so far) for tyres for asphalt tracks seems to double pink front, pink rear.

Has anyone else found purple front, magenta rear to be faster in some circumstances?
dontfeelcold is offline   Reply With Quote
Old 11-27-2012, 04:21 AM   #38646
Tech Champion
 
Radio Active's Avatar
 
Join Date: Jun 2003
Location: Newcastle, Australia
Posts: 6,995
Trader Rating: 2 (100%+)
Default

Quote:
Originally Posted by dontfeelcold View Post
All the recommendations (I have found so far) for tyres for asphalt tracks seems to double pink front, pink rear.

Has anyone else found purple front, magenta rear to be faster in some circumstances?
There was a competitor using that combination at the NSW Championships at SMA last month. It seemed to be working pretty well for him, but this was only after the grip came up from 2 days running.
__________________
Reigning NSW 4WD Group 20 Champion
Member: Maitland Radio Car Club (http://www.morcc.com.au)
twitter: @dvcotton
Australian 12th Scale hastag: #EP12AU
Radio Active is offline   Reply With Quote
Old 11-27-2012, 08:25 AM   #38647
Tech Master
 
TAMAK's Avatar
 
Join Date: Nov 2008
Posts: 1,915
Trader Rating: 28 (100%+)
Default

Hey guys, I am about to pull the trigger on the Serpent S120 link tube for 17.5t. Any thoughts on reliability and tune ability?
__________________
TrakPower Speed Equipment / Speed Passion
Serpent Natrix 748 TQ - Nova REX
D413 Reventon 1.1ex 13.5t; AE B6d Laydown Reventon Pro 1.1
DNX408V2-NovaP5, DETC410-Reventon 1.1ex-5.5t MMM
RC10 , RC10GT2- CV-R- SAVOX,
TAMAK is offline   Reply With Quote
Old 11-27-2012, 08:35 AM   #38648
Tech Master
 
wingman2's Avatar
 
Join Date: Dec 2005
Location: Tewkesbury, UK via Plymouth, UK.
Posts: 1,259
Default

...
__________________
Sponsored by CML Distribution - http://www.cmldistribution.co.uk

Last edited by wingman2; 11-27-2012 at 10:00 AM.
wingman2 is offline   Reply With Quote
Old 11-27-2012, 08:36 AM   #38649
Tech Master
 
wingman2's Avatar
 
Join Date: Dec 2005
Location: Tewkesbury, UK via Plymouth, UK.
Posts: 1,259
Default

...
__________________
Sponsored by CML Distribution - http://www.cmldistribution.co.uk

Last edited by wingman2; 11-27-2012 at 10:14 AM.
wingman2 is offline   Reply With Quote
Old 11-27-2012, 08:38 AM   #38650
Tech Master
 
wingman2's Avatar
 
Join Date: Dec 2005
Location: Tewkesbury, UK via Plymouth, UK.
Posts: 1,259
Default

...
__________________
Sponsored by CML Distribution - http://www.cmldistribution.co.uk

Last edited by wingman2; 11-27-2012 at 10:01 AM.
wingman2 is offline   Reply With Quote
Old 11-27-2012, 09:05 AM   #38651
Tech Master
 
Join Date: Jul 2011
Location: Austin, TX
Posts: 1,117
Trader Rating: 13 (100%+)
Default

^ If nothing else, the finished product looks pretty damn nice...
JamesL_71 is offline   Reply With Quote
Old 11-27-2012, 09:38 AM   #38652
Tech Master
 
wingman2's Avatar
 
Join Date: Dec 2005
Location: Tewkesbury, UK via Plymouth, UK.
Posts: 1,259
Default

...
__________________
Sponsored by CML Distribution - http://www.cmldistribution.co.uk

Last edited by wingman2; 11-27-2012 at 10:15 AM.
wingman2 is offline   Reply With Quote
Old 11-27-2012, 10:14 AM   #38653
Tech Master
 
wingman2's Avatar
 
Join Date: Dec 2005
Location: Tewkesbury, UK via Plymouth, UK.
Posts: 1,259
Default

I thought I would remove the crappy quality phone pics and put a few decent quality ones on instead.

I mentioned that I am not too serious about this chassis, I made it up just for a bit of fun really. It did go quite well at the club on Friday and will try it again with some better compound tyres on this coming Friday.

Next job is to slot the t-piece. The side to side action is really nice (the tweak screws at the front of the t-piece limit the amount of action, rather than adjust the tweak. The tweak is controlled by the small (front AE 0.18 springs) that sit nicely on the damper tubes), but the front to back motion is a touch too hard.

The spring on the centre damper tube just controls the pre-load of the pod when race ready.

So, nothing too serious, just for fun and here are some better pics:











Cheers guys :-)
__________________
Sponsored by CML Distribution - http://www.cmldistribution.co.uk
wingman2 is offline   Reply With Quote
Old 11-27-2012, 11:14 AM   #38654
Tech Master
R/C Tech Elite Subscriber
 
Join Date: Oct 2008
Location: Grand Portage, MN
Posts: 1,362
Trader Rating: 39 (100%+)
Default

wingman2, Sexy looking car. If you don;t mind I'd like to see how the rear pod attaches to the alum Chassis.

Looks really nice
__________________
______________________________________________
Jason Deadman

I race toy cars for fun. If I need to explain, you'll never understand.
jdeadman is offline   Reply With Quote
Old 11-27-2012, 11:21 AM   #38655
Tech Elite
 
303slowdown's Avatar
 
Join Date: Sep 2008
Location: Rapid City SD.
Posts: 2,190
Trader Rating: 19 (100%+)
Default

Quote:
Originally Posted by TAMAK View Post
Hey guys, I am about to pull the trigger on the Serpent S120 link tube for 17.5t. Any thoughts on reliability and tune ability?
The Serpents are great cars, the only thing i dont like about them is the aluminum caster blocks. They bend kind of easy and cost $15 for one to replace. Other than that great car.
__________________
Ryan Borgheiinck
303slowdown is offline   Reply With Quote
Reply

Similar Threads
Thread Thread Starter Forum Replies Last Post
New to the forum mig rod Electric Off-Road 1 01-05-2008 05:23 PM
hi i need help and im new to the forum racer4 Rookie Zone 4 01-21-2007 02:37 PM
Why is this forum listed under the On Road Forum? sport10 Onroad Nitro Engine Zone 0 01-11-2007 08:06 AM
Forum Changes... futureal Wisconsin & Illinois Racing 3 10-28-2002 09:26 PM



Currently Active Users Viewing This Thread: 3 (1 members and 2 guests)
tekin112000
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off



All times are GMT -7. It is currently 07:22 AM.


Powered By: vBulletin v3.9.2.1
Privacy Policy | Terms of Use | Advertise Content © 2001-2011 RCTech.net

SEO by vBSEO 3.5.0