R/C Tech Forums

Go Back   R/C Tech Forums > General Forums > Electric On-Road

    Hide Wikipost
Old 10-28-2016, 12:43 PM   -   Wikipost
R/C Tech Forums Thread Wiki: 1/12 forum
Please read: This is a community-maintained wiki post containing the most important information from this thread. You may edit the Wiki once you have been a member for 90 days and have made 90 posts.
 
Last edit by: fenton06
This is a place to share knowledge related to 1/12th scale racing. It is not to be used for conversations.

KITS:
Click links to go to manufacturer product page. If any are missing please add them!

TIRES:
Pre-mounted tires readily available in the US:
Pre-mounted tires readily available in the Europe:
  • Hot Race ??

Gluing your own donuts:
https://www.youtube.com/watch?v=hm7z1rz-74s - Special thanks to Edward Pickering!
Truing tires:
https://www.youtube.com/watch?v=8wqHOLWq6Uc - Special thanks to Edward Pickering!

The following information came from HERE, with some editing and information added. Thanks Christian!

THIS MAY NEED UPDATING FOR THE NEW BLACK CRC CARPET

Brands:
BSR, CRC, Jaco:
Pro One is no longer selling to the public, but it and the brands above are all mounted by BSR and use the same foam. The nomenclature of the BSR vs Jaco/CRC is a little different in a few instances but is otherwise the same. The BSR foam consists of three families, and can be identifed as synthetics, naturals, and blends.

Synthetics - The old school, light weight, easy to true "dry feeling" tires. These include tires like CRC/Jaco Yellow (BSR White), Black, Gray, etc. These tires offer the highest wear rate and lowest grip. Many racers continue to use these nder high bite conditions.

Naturals - These tires are usually the best alternative for low bite and asphalt. They include Pink, Magenta, Double Pink, Lilac (BSR Team Purple), Purple, and other tires. These tires provide a ton of grip, but tend to get sticky in high bite conditions. This rubber does not wear as easily, and the cars will pick up gunk and fibers from the carpet under most high bite conditions. This is especially bad if the humidity is high.

Blends - These are the tires most people run today. They were initially called "JFT foam" by some, as it was believed that the tires were the same as the JFT tires. We can divide the blends further into two groups: high rubber and low rubber content. The high rubber would be the new rear Orange and Red from the BSR family, and the low rubber would be the Green and Blue varieties. When, asked about the difference, John Foister from BSR Tires said they came from the same "family" of foam, but they offered different grip. According to John, the Green/Blue has more bite than Orange/Red, but from track testing Oranges offer more bite than Green (being equivalent to in hardness) when the grip is high and absolutely no grip when it is lower. The Orange foam has a denser pore structure and the tire is not as prone to chunking. It is also important to note is that BSR Blue rears are not the same as the BSR Blue fronts!

JFT:
JFT stands for Japan Foam Tire. They started the new wave of foam tires we are all using now (Blue/Blu, Green/Greene, Dbl Blue, etc). These tires are a little different than the BSR tire family, but work in very similar conditions. They offers four varieties A (asphalt), C (carpet), S (???), and R (???). This does not mean that those types only work on that surface, but this is what they recommend.

JFT uses the same foam for fronts and rears if the color is the same.

A: Used on asphalt, considered close to the natural rubber variety and are named consistently with other natural tires.
C: Used on carpet, considered a blend.
S: Used on carpet?, tires are ???
R: Used on carpet?, tires are ???

For setup, the JFT foam seem to generate more bite than the BSR, therefore the car tends to be a little more aggressive.

Ulti:
Ulti is another Japanese brand that offers an array of compounds. They have their own way of rating tires, and are difficult to equate to other brands. They have 4 different varieties, each in varying degrees of hardness.

J: High rubber content tire, similar to Pink/ Magenta. Soft would be close to a pink. These offer the most bite and are great for asphalt/carpet front tire. (J hard being very popular)
X: "Balanced" blend, similar to JFT Blue/ Green. Soft is equivalent to Green, medium to Blue in hardness. Great for carpet!
Y: High synthetic blend with lower grip, and is not a very popular variety.
Z: A very expensive "special" foam that is supposed to be magic on asphalt. Only make it in soft shore.
European tires:
There are many great European foam tire brands that use their own types of foam, as well as traditional foams. SOmeone with more knowledge about them will need to fill this in!

Tire Diameter:
If you are racing on carpet, you have to evaluate how much grip your track has. If your track is low to medium grip, you can run bigger tires. If you are on higher bite you have to cut them smaller, there is simply no way around it. Bigger tires are needed for asphalt, especially in the rear. The larger tires provide much needed lateral bite.

Carpet (mm):
Low - Medium Bite
Front: 42.0 - 42.5
Rear: 42.5 - 43.00
Medium - High Bite
Front: 40.5 - 41.0
Rear: 41.5 - 42.0
Big Race
Front: 39.5 - 40.0
Rear: 40.5 - 41.0
Asphalt (mm):
Parking Lot
Front: 43.0 - 44.0
Rear: 44.0 - 45.0
Prepped High Bite
Front: 42.0 - 43.0
Rear: 43.0 - 44.0

Tire Saucing:
Most facilities have moved towards odorless traction additives such as SXT. Some of additives evaporate very quickly and some do not. This seems to be something that is also dependent on tire compound and ambient temperature. For example, saucing a Green compound seems like it never dries, especially when tjhe temperature is lower. We have found that wiping the tires off 15 minutes before we go run allows the sauce to cure, which makes the car come in much quicker with Green rears. Blue compounds on the other hand, do fine when wiped off right before hitting the track.

Saucing half front and full rear is a good initial starting point. If the front of the car is too agressive you can sauce les than half, or for a shorter amount of time.
Tire Fuzzing:
In conditions of increasing grip, foam tires will somewtimes get sticky and pick up fuzz and debris from the track. This is highly dependent on the rubber sedan tire that is being run at your local track and the compound/ type of foam you are running on you car. The softer the sedan tire and the harder/higher rubber content in your foam tire, trouble with fuzzing seems more likely to occur.

There are ways to get around fuzzing under most conditions, and usually involves the selection of the correct foam compound. The more fuzz you get, the softer/lower rubber content you want to run.

Examples:
Problem: Car fuzzes with Lilac/Team Purple fronts and car starts pushing.
Solution: Use a softer front tire and or different family of foam. Replace it with Blue or Double Blue front.

Problem: Car loses rear bite 6 minutes into the run. Blue rear tires look almost clean but have small carpet hairs.
Solution: Use Green rear tires. The softer compound wears instead of getting sticky, minimizing fuzz.

Tire Selection:
Starting out, pick 2 tire compounds for the front and rear. The following should have you covered 99% of the time.

Front - Green and Blue (BSR) or Green and Light Blue (JFT)
Rear - Blue and Double Blue (BSR) or Blue and Dark Blue (JFT)

You may wonder about other compounds out there and if they might be better, trust me, they probably won't be. Even if there are other tires that can be as fast, the synthetic family wears out really fast and the high natural rubber will probably fuzz on you over an 8 minute run. The blends family seems to be the most versatile foam type available today. They last awhile, and sticking to them will make your process of tire selection simpler.
Tire Charts:
BSR/CRC/Jaco



Contact



Corally



JFT (Japan Foam Tire)



Ulti



Enneti (Xceed)



ELECTRONICS:
ESC:
As of now, ROAR is staying 1S (3.7V nominal; 4.2V fully charged) for 1/12. There are many 1S ESC's with a built in BEC so nothing else is required to power the receiver and servo.

If you don't want to lock yourself into a 1S specific ESC, you do have other options! It is possible to use your 2S ESC without a booster or receiver pack, and the ESC simply supplies the lower voltage. If that does not appeal to you, you will need to use an Rx pack or booster. The Rx pack and booster will both supply the receiver with a higher voltage than the 1S pack.

If you decide to use an Rx pack, MAKE SURE TO REMOVE THE RED WIRE FROM THE ESC PLUG THAT GOES INTO THE RECEIVER!!!

If you choose to use a voltage booster, it works exactly how it sounds. Instead of plugging the ESC into the receiver, it plugs into the booster, and the booster plug goes to the ESC, supplying the higher voltage.

1S ESC:
If there are any missing please add them!!

If anyone would like a need for a chart comparing the ESC's specs PM fenton06 and I'll get one made and put in here!
Voltage Boosters:
If there are any missing please add them!
Servos:
BODIES:
Black Art (CRC - US Dist):
  • Audi R8C - BA002 - .020 Thick



  • Black Market (Mohawk 12) - BA005 - .020



  • Lola B10 - BA006 - .020 thick
  • Toyota TS030 - BA008 - .020 thick

    Lola - black/red, TS030 - green/pink


PROTOForm:

Reflex Racing/RSD:

SUSPENSION ADJUSTMENTS:

Print Wikipost

Reply
 
Thread Tools Search this Thread
Old 08-27-2012, 11:41 PM   #38176
Tech Champion
 
Radio Active's Avatar
 
Join Date: Jun 2003
Location: Newcastle, Australia
Posts: 6,994
Trader Rating: 2 (100%+)
Default

Quote:
Originally Posted by ongbenghui View Post
Hi,

With today 2.4Ghz short antenna, has anyone try to embed antenna within the body shell ?

any good tips to do that ?
That'll work fine, but you'll want to keep the rollover antenna. Without it a rollover goes from a 5% chance of needing a marshal to a 50% chance.
__________________
Reigning NSW 4WD Group 20 Champion
Member: Maitland Radio Car Club (http://www.morcc.com.au)
twitter: @dvcotton
Australian 12th Scale hastag: #EP12AU
Radio Active is offline   Reply With Quote
Old 08-28-2012, 10:57 AM   #38177
Tech Elite
 
DesertRat's Avatar
R/C Tech Elite Subscriber
 
Join Date: Mar 2011
Location: Sniffin the 'Sauce Fumes
Posts: 2,377
Trader Rating: 1 (100%+)
Default

I guess i always just liked the clean look of no rollover stick... its hard to flip a 1/12 unless you race on a track with corner volcanos.
__________________
I race toy cars for fun. If I need to explain, you'll never understand.
If everything is under control... go faster.
WTB: Carpet racing in Arizona.
It is obvious and intuitive to the most casual of observers that RC racing is better than golf.
DesertRat is offline   Reply With Quote
Old 08-28-2012, 11:50 AM   #38178
Tech Master
R/C Tech Elite Subscriber
 
Join Date: Oct 2008
Location: Grand Portage, MN
Posts: 1,362
Trader Rating: 39 (100%+)
Default

We have the dreaded DOTS and not the small plastic ones these are steel and just over a foot across with a height in the middle I would say of 2" So hitting one of those is instant launch
__________________
______________________________________________
Jason Deadman

I race toy cars for fun. If I need to explain, you'll never understand.
jdeadman is offline   Reply With Quote
Old 08-28-2012, 12:24 PM   #38179
Tech Lord
 
wingracer's Avatar
 
Join Date: Nov 2007
Posts: 12,636
Trader Rating: 21 (100%+)
Default

Also, traction rolling can occur in high bite. I know, my car was constantly traction rolling the first few lap this weekend. Fortunately, I could usually get it out of the way in warm-up.
__________________
Sean. Certified speed crazed mowron.
Team Shepherd USA
www.ashfordhobby.com
wingracer is offline   Reply With Quote
Old 08-28-2012, 12:26 PM   #38180
Tech Champion
 
Join Date: Nov 2001
Location: Hawaii, USA
Posts: 7,157
Default

Also other 1/12th cars can be a ramp and roll you over.
InspGadgt is offline   Reply With Quote
Old 08-28-2012, 07:16 PM   #38181
Tech Master
 
EricF's Avatar
 
Join Date: Jun 2003
Location: AZ
Posts: 1,515
Default

I tried racing my car without the rollover antenna and I couldn't get used to it. I need just so my car doesn't look weird.

Also if your car doesn't have one it ca be used as a ramp to launch other cars.
E
__________________
<
AE 12R5.2 (x2) - TC7 - M05 - M05V2R

People who don't have to wait for the latest item, should not tell those that do, that "It's worth the wait"
EricF is online now   Reply With Quote
Old 08-29-2012, 01:48 AM   #38182
Tech Elite
 
odpurple's Avatar
 
Join Date: Dec 2002
Location: San Francisco
Posts: 2,187
Default

Not using a rollover antenna in 1/12 is just dumb. Looks are not important, performance is. It doesn't happen every time, but how will you feel if you travel to a big race and lose a 1/2 a lap or a whole one because your car is on it's lid?
__________________
TOP Racing USA--OD Racing--Novak--Power Push--J Spec
odpurple is offline   Reply With Quote
Old 08-29-2012, 10:17 AM   #38183
Tech Elite
 
DesertRat's Avatar
R/C Tech Elite Subscriber
 
Join Date: Mar 2011
Location: Sniffin the 'Sauce Fumes
Posts: 2,377
Trader Rating: 1 (100%+)
Default

I will not be running a rollover antenna at the IIC. The car is too pudgy already and I will not be adding the weight.
__________________
I race toy cars for fun. If I need to explain, you'll never understand.
If everything is under control... go faster.
WTB: Carpet racing in Arizona.
It is obvious and intuitive to the most casual of observers that RC racing is better than golf.
DesertRat is offline   Reply With Quote
Old 08-29-2012, 10:27 AM   #38184
Tech Master
 
HB Moose's Avatar
 
Join Date: Oct 2003
Location: Surf City, USA
Posts: 1,067
Default

Quote:
Originally Posted by DesertRat View Post
I will not be running a rollover antenna at the IIC. The car is too pudgy already and I will not be adding the weight.
Guess it's a matter of risk vs reward. But I'll say thanks if I pass you while you sit up side down.
__________________
Bruce "Moose" Riedinger
HB Moose is offline   Reply With Quote
Old 08-29-2012, 12:21 PM   #38185
AOD
Tech Regular
 
AOD's Avatar
 
Join Date: Apr 2007
Location: 9th Island
Posts: 470
Default

Rollover antennas and antenna tubes sticking out of cars are antiquted, it's time to move on into the future. I have not run a rollover since 2010 and I'm not going change anytime soon. Sure I may loose some time if I crash or get taken out but I can live with that. Never like the car on a stick look....lol
AOD is offline   Reply With Quote
Old 08-29-2012, 02:00 PM   #38186
Tech Master
 
ByteStream's Avatar
 
Join Date: Jan 2010
Location: 5280 Raceway
Posts: 1,131
Trader Rating: 2 (100%+)
Default

Quote:
Originally Posted by DesertRat View Post
I will not be running a rollover antenna at the IIC. The car is too pudgy already and I will not be adding the weight.
Food for thought ..

IIC .. Imagine shorting the sweeper, the car gets unsettled, flops on it's lid and goes sliding across the carpet head first into the board, jumps the board, and goes underneath the promotional tables that are set up by the sweeper. The marshal goes scrambling for your car which he can't see cause it's somewhere underneath the tables. I've seen it happen more than once.

Last year 8-10 seconds was the difference between being TQ and BQ, BQ and CQ. It's the difference between a full main.
__________________
RCAmerica | Xray | Hudy | KO Propo | Hobbywing HWNA | R1Wurks | BSR Tires
5280 Raceway - www.5280raceway.com
MILE HIGH INDOOR CHAMPS April 20-23rd 2017 @ www.milehighindoorchamps.com
ByteStream is offline   Reply With Quote
Old 08-29-2012, 02:16 PM   #38187
Tech Elite
 
NolanP's Avatar
 
Join Date: Apr 2012
Location: Westmont
Posts: 2,425
Trader Rating: 8 (100%+)
Default

Quote:
Originally Posted by ByteStream View Post
Last year 8-10 seconds was the difference between being TQ and BQ, BQ and CQ. It's the difference between a full main.
Which usually means if you have to use the roll over your probably looking at C main anyway.
Plus as dumb as it sounds it actually changes the roll center of the 12th scaler.
__________________
Mod Touring Car
Mod 12th
Nitro TC
Nitro GT
Wheeler and Mod Buggy
NolanP is offline   Reply With Quote
Old 08-29-2012, 02:23 PM   #38188
Tech Elite
 
DesertRat's Avatar
R/C Tech Elite Subscriber
 
Join Date: Mar 2011
Location: Sniffin the 'Sauce Fumes
Posts: 2,377
Trader Rating: 1 (100%+)
Default

Quote:
Originally Posted by ByteStream View Post
Food for thought ..

IIC .. Imagine shorting the sweeper, the car gets unsettled, flops on it's lid and goes sliding across the carpet head first into the board, jumps the board, and goes underneath the promotional tables that are set up by the sweeper. The marshal goes scrambling for your car which he can't see cause it's somewhere underneath the tables. I've seen it happen more than once.

Last year 8-10 seconds was the difference between being TQ and BQ, BQ and CQ. It's the difference between a full main.

If you want to be assured of having countered every possible mishap....
Heres another possibility I have seen happen more than once just in club racing: the rollover stick comes lose or breaks and starts to drag the poor saps receiver wire around and they have to retire from the race. That's impossible on my car.
__________________
I race toy cars for fun. If I need to explain, you'll never understand.
If everything is under control... go faster.
WTB: Carpet racing in Arizona.
It is obvious and intuitive to the most casual of observers that RC racing is better than golf.
DesertRat is offline   Reply With Quote
Old 08-29-2012, 02:25 PM   #38189
Tech Champion
 
RedBullFiXX's Avatar
R/C Tech Elite Subscriber
 
Join Date: Mar 2003
Location: Intergalactic Planetary
Posts: 6,539
Trader Rating: 34 (100%+)
Cool

Stick
No Stick

It's still 12th scale

The coolest class of RC racing cars ever !

Right ?
Who's with me
__________________
--> 12th scale Information Source <--

"Men do not quit playing because they grow old; they grow old because they quit playing."
― Oliver Wendell Holmes Jr.
RedBullFiXX is offline   Reply With Quote
Old 08-29-2012, 02:27 PM   #38190
Tech Elite
 
CypressMidWest's Avatar
 
Join Date: May 2003
Location: Central Ohio
Posts: 4,603
Trader Rating: 1 (100%+)
Default

Quote:
Originally Posted by NolanP View Post
Which usually means if you have to use the roll over your probably looking at C main anyway.
Hardly, you roll onto your side, the roll over flops you back down and you lose 2 sec. instead of 10-15 sec. Keep in mind that you're also not the only car on the track. If the mistake is mine and I chose not to run a rollover, then that's on me. But I would never forgive myself if I got peeled by lapped traffic, and didn't make the main because I was stuck on my lid. Just a little insurance policy if you will.........
__________________
Team CRC, Access Race Place, US Indoor Champs, CD SUPERPRO, RK Designs, Cypress, Founder and lead instructor of the Ian Ruggles Negative Reinforcement Driver Training Program, enroll now.....
CypressMidWest is offline   Reply With Quote
Reply

Similar Threads
Thread Thread Starter Forum Replies Last Post
New to the forum mig rod Electric Off-Road 1 01-05-2008 05:23 PM
hi i need help and im new to the forum racer4 Rookie Zone 4 01-21-2007 02:37 PM
Why is this forum listed under the On Road Forum? sport10 Onroad Nitro Engine Zone 0 01-11-2007 08:06 AM
Forum Changes... futureal Wisconsin & Illinois Racing 3 10-28-2002 09:26 PM



Currently Active Users Viewing This Thread: 8 (1 members and 7 guests)
TOADYY
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off



All times are GMT -7. It is currently 09:28 PM.


Powered By: vBulletin v3.9.2.1
Privacy Policy | Terms of Use | Advertise Content © 2001-2011 RCTech.net

SEO by vBSEO 3.5.0