R/C Tech Forums

Go Back   R/C Tech Forums > General Forums > Electric On-Road

    Hide Wikipost
Old 10-28-2016, 12:43 PM   -   Wikipost
R/C Tech Forums Thread Wiki: 1/12 forum
Please read: This is a community-maintained wiki post containing the most important information from this thread. You may edit the Wiki once you have been a member for 90 days and have made 90 posts.
 
Last edit by: fenton06
This is a place to share knowledge related to 1/12th scale racing. It is not to be used for conversations.

KITS:
Click links to go to manufacturer product page. If any are missing please add them!

TIRES:
Pre-mounted tires readily available in the US:
Pre-mounted tires readily available in the Europe:
  • Hot Race ??

Gluing your own donuts:
https://www.youtube.com/watch?v=hm7z1rz-74s - Special thanks to Edward Pickering!
Truing tires:
https://www.youtube.com/watch?v=8wqHOLWq6Uc - Special thanks to Edward Pickering!

The following information came from HERE, with some editing and information added. Thanks Christian!

THIS MAY NEED UPDATING FOR THE NEW BLACK CRC CARPET

Brands:
BSR, CRC, Jaco:
Pro One is no longer selling to the public, but it and the brands above are all mounted by BSR and use the same foam. The nomenclature of the BSR vs Jaco/CRC is a little different in a few instances but is otherwise the same. The BSR foam consists of three families, and can be identifed as synthetics, naturals, and blends.

Synthetics - The old school, light weight, easy to true "dry feeling" tires. These include tires like CRC/Jaco Yellow (BSR White), Black, Gray, etc. These tires offer the highest wear rate and lowest grip. Many racers continue to use these nder high bite conditions.

Naturals - These tires are usually the best alternative for low bite and asphalt. They include Pink, Magenta, Double Pink, Lilac (BSR Team Purple), Purple, and other tires. These tires provide a ton of grip, but tend to get sticky in high bite conditions. This rubber does not wear as easily, and the cars will pick up gunk and fibers from the carpet under most high bite conditions. This is especially bad if the humidity is high.

Blends - These are the tires most people run today. They were initially called "JFT foam" by some, as it was believed that the tires were the same as the JFT tires. We can divide the blends further into two groups: high rubber and low rubber content. The high rubber would be the new rear Orange and Red from the BSR family, and the low rubber would be the Green and Blue varieties. When, asked about the difference, John Foister from BSR Tires said they came from the same "family" of foam, but they offered different grip. According to John, the Green/Blue has more bite than Orange/Red, but from track testing Oranges offer more bite than Green (being equivalent to in hardness) when the grip is high and absolutely no grip when it is lower. The Orange foam has a denser pore structure and the tire is not as prone to chunking. It is also important to note is that BSR Blue rears are not the same as the BSR Blue fronts!

JFT:
JFT stands for Japan Foam Tire. They started the new wave of foam tires we are all using now (Blue/Blu, Green/Greene, Dbl Blue, etc). These tires are a little different than the BSR tire family, but work in very similar conditions. They offers four varieties A (asphalt), C (carpet), S (???), and R (???). This does not mean that those types only work on that surface, but this is what they recommend.

JFT uses the same foam for fronts and rears if the color is the same.

A: Used on asphalt, considered close to the natural rubber variety and are named consistently with other natural tires.
C: Used on carpet, considered a blend.
S: Used on carpet?, tires are ???
R: Used on carpet?, tires are ???

For setup, the JFT foam seem to generate more bite than the BSR, therefore the car tends to be a little more aggressive.

Ulti:
Ulti is another Japanese brand that offers an array of compounds. They have their own way of rating tires, and are difficult to equate to other brands. They have 4 different varieties, each in varying degrees of hardness.

J: High rubber content tire, similar to Pink/ Magenta. Soft would be close to a pink. These offer the most bite and are great for asphalt/carpet front tire. (J hard being very popular)
X: "Balanced" blend, similar to JFT Blue/ Green. Soft is equivalent to Green, medium to Blue in hardness. Great for carpet!
Y: High synthetic blend with lower grip, and is not a very popular variety.
Z: A very expensive "special" foam that is supposed to be magic on asphalt. Only make it in soft shore.
European tires:
There are many great European foam tire brands that use their own types of foam, as well as traditional foams. SOmeone with more knowledge about them will need to fill this in!

Tire Diameter:
If you are racing on carpet, you have to evaluate how much grip your track has. If your track is low to medium grip, you can run bigger tires. If you are on higher bite you have to cut them smaller, there is simply no way around it. Bigger tires are needed for asphalt, especially in the rear. The larger tires provide much needed lateral bite.

Carpet (mm):
Low - Medium Bite
Front: 42.0 - 42.5
Rear: 42.5 - 43.00
Medium - High Bite
Front: 40.5 - 41.0
Rear: 41.5 - 42.0
Big Race
Front: 39.5 - 40.0
Rear: 40.5 - 41.0
Asphalt (mm):
Parking Lot
Front: 43.0 - 44.0
Rear: 44.0 - 45.0
Prepped High Bite
Front: 42.0 - 43.0
Rear: 43.0 - 44.0

Tire Saucing:
Most facilities have moved towards odorless traction additives such as SXT. Some of additives evaporate very quickly and some do not. This seems to be something that is also dependent on tire compound and ambient temperature. For example, saucing a Green compound seems like it never dries, especially when tjhe temperature is lower. We have found that wiping the tires off 15 minutes before we go run allows the sauce to cure, which makes the car come in much quicker with Green rears. Blue compounds on the other hand, do fine when wiped off right before hitting the track.

Saucing half front and full rear is a good initial starting point. If the front of the car is too agressive you can sauce les than half, or for a shorter amount of time.
Tire Fuzzing:
In conditions of increasing grip, foam tires will somewtimes get sticky and pick up fuzz and debris from the track. This is highly dependent on the rubber sedan tire that is being run at your local track and the compound/ type of foam you are running on you car. The softer the sedan tire and the harder/higher rubber content in your foam tire, trouble with fuzzing seems more likely to occur.

There are ways to get around fuzzing under most conditions, and usually involves the selection of the correct foam compound. The more fuzz you get, the softer/lower rubber content you want to run.

Examples:
Problem: Car fuzzes with Lilac/Team Purple fronts and car starts pushing.
Solution: Use a softer front tire and or different family of foam. Replace it with Blue or Double Blue front.

Problem: Car loses rear bite 6 minutes into the run. Blue rear tires look almost clean but have small carpet hairs.
Solution: Use Green rear tires. The softer compound wears instead of getting sticky, minimizing fuzz.

Tire Selection:
Starting out, pick 2 tire compounds for the front and rear. The following should have you covered 99% of the time.

Front - Green and Blue (BSR) or Green and Light Blue (JFT)
Rear - Blue and Double Blue (BSR) or Blue and Dark Blue (JFT)

You may wonder about other compounds out there and if they might be better, trust me, they probably won't be. Even if there are other tires that can be as fast, the synthetic family wears out really fast and the high natural rubber will probably fuzz on you over an 8 minute run. The blends family seems to be the most versatile foam type available today. They last awhile, and sticking to them will make your process of tire selection simpler.
Tire Charts:
BSR/CRC/Jaco



Contact



Corally



JFT (Japan Foam Tire)



Ulti



Enneti (Xceed)



ELECTRONICS:
ESC:
As of now, ROAR is staying 1S (3.7V nominal; 4.2V fully charged) for 1/12. There are many 1S ESC's with a built in BEC so nothing else is required to power the receiver and servo.

If you don't want to lock yourself into a 1S specific ESC, you do have other options! It is possible to use your 2S ESC without a booster or receiver pack, and the ESC simply supplies the lower voltage. If that does not appeal to you, you will need to use an Rx pack or booster. The Rx pack and booster will both supply the receiver with a higher voltage than the 1S pack.

If you decide to use an Rx pack, MAKE SURE TO REMOVE THE RED WIRE FROM THE ESC PLUG THAT GOES INTO THE RECEIVER!!!

If you choose to use a voltage booster, it works exactly how it sounds. Instead of plugging the ESC into the receiver, it plugs into the booster, and the booster plug goes to the ESC, supplying the higher voltage.

1S ESC:
If there are any missing please add them!!

If anyone would like a need for a chart comparing the ESC's specs PM fenton06 and I'll get one made and put in here!
Voltage Boosters:
If there are any missing please add them!
Servos:
BODIES:
Black Art (CRC - US Dist):
  • Audi R8C - BA002 - .020 Thick



  • Black Market (Mohawk 12) - BA005 - .020



  • Lola B10 - BA006 - .020 thick
  • Toyota TS030 - BA008 - .020 thick

    Lola - black/red, TS030 - green/pink


PROTOForm:

Reflex Racing/RSD:

SUSPENSION ADJUSTMENTS:

Print Wikipost

Reply
 
Thread Tools Search this Thread
Old 12-28-2010, 12:16 AM   #35266
Tech Fanatic
 
Join Date: Aug 2008
Posts: 828
Trader Rating: 36 (100%+)
Default

Thanks a ton Alex that will provide me with quite a bit of info and reading. Looking forward to digging into it.
__________________
On-point/ EA horsey power/XFactory / Hudy / Tekin / Trinity / KO Propo / Reino's Ragu
mracer is offline   Reply With Quote
Old 12-28-2010, 06:59 AM   #35267
Tech Regular
 
Join Date: Aug 2007
Posts: 399
Default inspire me show me your best 1/12th bodyshells

best paint jobs please
__________________
MB Models Leeds,RC4LESS,Troy McKune
V-DEZIGN CR5 ,LRP SXX, CRC cells,
tellan is offline   Reply With Quote
Old 12-28-2010, 07:50 AM   #35268
Tech Master
 
Drillit's Avatar
 
Join Date: Sep 2007
Location: Oreganastan Pacific Wonderland home to Indoor Farming
Posts: 1,059
Default

try this from 20 pages ago........

12th scale gallery (Post your pics... body on and body off)
__________________
Mark Tilley
Got T-Bar ? ......... Oregons No ZigZag rule sucks
Bias the weight to the end you want to hit the wall with first!
Searchin fer answers in the Fog.......that's what I found
Drillit is offline   Reply With Quote
Old 12-28-2010, 10:16 AM   #35269
CFR
Tech Regular
 
CFR's Avatar
 
Join Date: May 2007
Posts: 327
Default

Quote:
Originally Posted by Shifty View Post
Here is something i cooked up to run in Vegas. 12th and wgt Clamping Motor mount so any motor can be balanced in the pod. No Link rear suspension, carbon old school front end castor and camber is done in the blocks no paper shim, Also my car has 4 side springs so i have a very progressive side spring. I am only running the outer set at the moment my home track is a little light on traction. I have had the idea for the car since 98 but until recently i didn't have the means to build it. Just a project of mine.
How's the SJ12 been running lately?
CFR is offline   Reply With Quote
Old 12-28-2010, 08:13 PM   #35270
Tech Elite
 
VooDooPH's Avatar
 
Join Date: Feb 2006
Location: Philippines
Posts: 3,714
Trader Rating: 18 (100%+)
Send a message via Yahoo to VooDooPH
Default

does the CRC Carpet Knife, AE RC12R5.1 and the Yok R12 use metric or SAE screws?
__________________
[TRF418][TB-04Pro][FF-03Pro][M-05v2][TRF102][F-104 WGP][TT-01R TypeE]
[Cross CF-01'08][Yokomo R12][Team C TC02Evo][Team C T8E v3]
VooDooPH is offline   Reply With Quote
Old 12-28-2010, 08:29 PM   #35271
Tech Champion
 
Korey Harbke's Avatar
 
Join Date: Oct 2002
Location: Redmond, WA
Posts: 6,053
Trader Rating: 13 (100%+)
Default

I know the CRC is fully SAE.

I think the AE/Yok cars are mostly metric, but use std screws for the wheels. I could be wrong on that though.

-Korey
__________________
Pro Spec America/Apex RC - Team ORCA - Awesomatix USA - Roche RC USA - AVID - Sweep - Protoform - Pro-One RC - Slapmaster Tools - Hebiki Design Works - Turtlemaster Racing - Seattle RC Racers - Timezone Hobbies
Korey Harbke is offline   Reply With Quote
Old 12-28-2010, 08:31 PM   #35272
Tech Master
 
Alex C's Avatar
 
Join Date: Feb 2005
Location: On a ship in the warm seas with no sail !!!
Posts: 1,638
Trader Rating: 50 (100%+)
Default

Quote:
Originally Posted by VooDooPH View Post
does the CRC Carpet Knife, AE RC12R5.1 and the Yok R12 use metric or SAE screws?
From my experience both the Associated 12R5.1 & Yokomo R12 both use Metric, for the CRC I believe they are SAE.

Hope that helps .......... Alex
__________________
Alex Cortez
Thank You to all My Sponsors
Ko Propo USA / RC America - Xray - Hudy / Max Power Engines / VP PowerMaster Fuel / Team Espo - "Lay it down Prop"!!!!
Alex C is offline   Reply With Quote
Old 12-29-2010, 07:01 PM   #35273
Tech Adept
 
speed-e's Avatar
 
Join Date: Aug 2005
Posts: 198
Trader Rating: 28 (100%+)
Default

Quote:
Originally Posted by Korey Harbke View Post
I know the CRC is fully SAE.

I think the AE/Yok cars are mostly metric, but use std screws for the wheels. I could be wrong on that though.

-Korey
You're correct, at least for the Associated car.
__________________
Mugen Seiki
MIP
Contrast Neo 2.5 HR, Neo X
V-Speed Engines
RadioPost
speed-e is offline   Reply With Quote
Old 12-30-2010, 05:18 AM   #35274
Tech Elite
 
nitrobeast's Avatar
 
Join Date: Apr 2006
Location: Colonia, NJ
Posts: 2,297
Trader Rating: 40 (100%+)
Default

Quote:
Originally Posted by Korey Harbke View Post
I know the CRC is fully SAE.

I think the AE/Yok cars are mostly metric, but use std screws for the wheels. I could be wrong on that though.

-Korey
Quote:
Originally Posted by Alex C View Post
From my experience both the Associated 12R5.1 & Yokomo R12 both use Metric, for the CRC I believe they are SAE.

Hope that helps .......... Alex
Quote:
Originally Posted by speed-e View Post
You're correct, at least for the Associated car.
Both of you are correct. I went crazy looking for metric screws in my stuff for the wheel hubs of my associate only to realize they were SAE.
__________________
Rui Goncalves
Reds Racing USA|Hot Race Tyres USA|Team CRC|Team Trinity|
Jackson RC|Horsham RC|Floyd Bennett|Blue Diamond
Jackson curbs, ready for lift off!
nitrobeast is offline   Reply With Quote
Old 12-30-2010, 05:19 AM   #35275
Tech Elite
 
nitrobeast's Avatar
 
Join Date: Apr 2006
Location: Colonia, NJ
Posts: 2,297
Trader Rating: 40 (100%+)
Default Center shock

What are most guys using? Am I the only one that cant stand the associated stuff?
__________________
Rui Goncalves
Reds Racing USA|Hot Race Tyres USA|Team CRC|Team Trinity|
Jackson RC|Horsham RC|Floyd Bennett|Blue Diamond
Jackson curbs, ready for lift off!
nitrobeast is offline   Reply With Quote
Old 12-30-2010, 05:46 AM   #35276
Tech Elite
 
Yokomo_Ant3's Avatar
 
Join Date: Apr 2008
Location: Australia
Posts: 2,387
Trader Rating: 29 (100%+)
Default

Quote:
Originally Posted by nitrobeast View Post
What are most guys using? Am I the only one that cant stand the associated stuff?
Hotbodies shock all the way!
__________________
Antoni Caretti

Team Schumacher - Team Scorpion - Sweep Racing - Bezerk RC - Adelaide RC
Yokomo_Ant3 is offline   Reply With Quote
Old 12-30-2010, 03:33 PM   #35277
Tech Elite
 
Grenade10's Avatar
 
Join Date: Nov 2003
Location: Fort Collins, Colorado
Posts: 4,667
Trader Rating: 37 (100%+)
Default

Quote:
Originally Posted by nitrobeast View Post
What are most guys using? Am I the only one that cant stand the associated stuff?
Try the CRC Encore Shock, Builds easy Holds fluids and lasts!!!
__________________
Darkside, Sweep, BSR, Fantom, IGT Hobbies and IGT8
Byrons Fuel, ProtoForm Bodies & Futaba Radio Gear by Choice
Founding Member of CORRC .... 5280raceway
www.darksidems.com www.igthobbies.com www.IGT8.com
Grenade10 is offline   Reply With Quote
Old 12-30-2010, 04:21 PM   #35278
Tech Adept
 
NoMercyRC's Avatar
 
Join Date: Dec 2010
Location: Summerville SC
Posts: 167
Trader Rating: 4 (100%+)
Default

hello i just recently got a CRC carpet knife its a roller right now. what esc an motor should i use in i want to race with it an im new to the 12th scale i used to run 18th scale so any help would be great. thanks James
__________________
MY RC GARAGE:
Exceed Forza VX-18 engine
NoMercyRC is offline   Reply With Quote
Old 12-30-2010, 04:52 PM   #35279
Tech Master
 
LonnyJ1950's Avatar
 
Join Date: Aug 2009
Location: Tucson, AZ. USA
Posts: 1,139
Default

You should check to see what classes they are running at the track where you plan to race. No sense buying a mod if everybody races 13.5. As far as speed controls go the Tekin RS is probably the most popular choice. Just about everybody who has one loves it. I am running an LRP that I am very happy with, the current choice is SXX Competition (not TC Spec). If your track is running a Cirtek class, that is an excellent place to start. Speedpassion sells the Cirtek motor and speedo combo for around $90 I believe.
__________________
Lonny
LonnyJ1950 is offline   Reply With Quote
Old 12-30-2010, 04:53 PM   #35280
Tech Champion
 
Scottrik's Avatar
 
Join Date: Sep 2004
Location: Billings, MT
Posts: 6,119
Trader Rating: 237 (100%+)
Default

Kinda depends. Is your local race program running "spec" or "open" esc rules. If it's "spec" ("blinky") I'd probably get an old GTB 4-cell (what I've been using) or a Havoc 1-s (added bonus of internal voltage booster). No real need to spend more. If they're running "open" you'll want a Tekin RS, Novak Kinetic, etc.
__________________
Congressmen should wear uniforms like NASCAR drivers so we can identify their corporate sponsors.

THE REVOLUTION WILL NOT BE TELEVISED -Gil Scott-Heron (1949-2011)
Scottrik is offline   Reply With Quote
Reply

Similar Threads
Thread Thread Starter Forum Replies Last Post
New to the forum mig rod Electric Off-Road 1 01-05-2008 05:23 PM
hi i need help and im new to the forum racer4 Rookie Zone 4 01-21-2007 02:37 PM
Why is this forum listed under the On Road Forum? sport10 Onroad Nitro Engine Zone 0 01-11-2007 08:06 AM
Forum Changes... futureal Wisconsin & Illinois Racing 3 10-28-2002 09:26 PM



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off



All times are GMT -7. It is currently 08:46 AM.


Powered By: vBulletin v3.9.2.1
Privacy Policy | Terms of Use | Advertise Content © 2001-2011 RCTech.net

SEO by vBSEO 3.5.0