R/C Tech Forums

Go Back   R/C Tech Forums > General Forums > Electric On-Road

    Hide Wikipost
Old 10-28-2016, 12:43 PM   -   Wikipost
R/C Tech Forums Thread Wiki: 1/12 forum
Please read: This is a community-maintained wiki post containing the most important information from this thread. You may edit the Wiki once you have been a member for 90 days and have made 90 posts.
 
Last edit by: fenton06
This is a place to share knowledge related to 1/12th scale racing. It is not to be used for conversations.

KITS:
Click links to go to manufacturer product page. If any are missing please add them!

TIRES:
Pre-mounted tires readily available in the US:
Pre-mounted tires readily available in the Europe:
  • Hot Race ??

Gluing your own donuts:
https://www.youtube.com/watch?v=hm7z1rz-74s - Special thanks to Edward Pickering!
Truing tires:
https://www.youtube.com/watch?v=8wqHOLWq6Uc - Special thanks to Edward Pickering!

The following information came from HERE, with some editing and information added. Thanks Christian!

THIS MAY NEED UPDATING FOR THE NEW BLACK CRC CARPET

Brands:
BSR, CRC, Jaco:
Pro One is no longer selling to the public, but it and the brands above are all mounted by BSR and use the same foam. The nomenclature of the BSR vs Jaco/CRC is a little different in a few instances but is otherwise the same. The BSR foam consists of three families, and can be identifed as synthetics, naturals, and blends.

Synthetics - The old school, light weight, easy to true "dry feeling" tires. These include tires like CRC/Jaco Yellow (BSR White), Black, Gray, etc. These tires offer the highest wear rate and lowest grip. Many racers continue to use these nder high bite conditions.

Naturals - These tires are usually the best alternative for low bite and asphalt. They include Pink, Magenta, Double Pink, Lilac (BSR Team Purple), Purple, and other tires. These tires provide a ton of grip, but tend to get sticky in high bite conditions. This rubber does not wear as easily, and the cars will pick up gunk and fibers from the carpet under most high bite conditions. This is especially bad if the humidity is high.

Blends - These are the tires most people run today. They were initially called "JFT foam" by some, as it was believed that the tires were the same as the JFT tires. We can divide the blends further into two groups: high rubber and low rubber content. The high rubber would be the new rear Orange and Red from the BSR family, and the low rubber would be the Green and Blue varieties. When, asked about the difference, John Foister from BSR Tires said they came from the same "family" of foam, but they offered different grip. According to John, the Green/Blue has more bite than Orange/Red, but from track testing Oranges offer more bite than Green (being equivalent to in hardness) when the grip is high and absolutely no grip when it is lower. The Orange foam has a denser pore structure and the tire is not as prone to chunking. It is also important to note is that BSR Blue rears are not the same as the BSR Blue fronts!

JFT:
JFT stands for Japan Foam Tire. They started the new wave of foam tires we are all using now (Blue/Blu, Green/Greene, Dbl Blue, etc). These tires are a little different than the BSR tire family, but work in very similar conditions. They offers four varieties A (asphalt), C (carpet), S (???), and R (???). This does not mean that those types only work on that surface, but this is what they recommend.

JFT uses the same foam for fronts and rears if the color is the same.

A: Used on asphalt, considered close to the natural rubber variety and are named consistently with other natural tires.
C: Used on carpet, considered a blend.
S: Used on carpet?, tires are ???
R: Used on carpet?, tires are ???

For setup, the JFT foam seem to generate more bite than the BSR, therefore the car tends to be a little more aggressive.

Ulti:
Ulti is another Japanese brand that offers an array of compounds. They have their own way of rating tires, and are difficult to equate to other brands. They have 4 different varieties, each in varying degrees of hardness.

J: High rubber content tire, similar to Pink/ Magenta. Soft would be close to a pink. These offer the most bite and are great for asphalt/carpet front tire. (J hard being very popular)
X: "Balanced" blend, similar to JFT Blue/ Green. Soft is equivalent to Green, medium to Blue in hardness. Great for carpet!
Y: High synthetic blend with lower grip, and is not a very popular variety.
Z: A very expensive "special" foam that is supposed to be magic on asphalt. Only make it in soft shore.
European tires:
There are many great European foam tire brands that use their own types of foam, as well as traditional foams. SOmeone with more knowledge about them will need to fill this in!

Tire Diameter:
If you are racing on carpet, you have to evaluate how much grip your track has. If your track is low to medium grip, you can run bigger tires. If you are on higher bite you have to cut them smaller, there is simply no way around it. Bigger tires are needed for asphalt, especially in the rear. The larger tires provide much needed lateral bite.

Carpet (mm):
Low - Medium Bite
Front: 42.0 - 42.5
Rear: 42.5 - 43.00
Medium - High Bite
Front: 40.5 - 41.0
Rear: 41.5 - 42.0
Big Race
Front: 39.5 - 40.0
Rear: 40.5 - 41.0
Asphalt (mm):
Parking Lot
Front: 43.0 - 44.0
Rear: 44.0 - 45.0
Prepped High Bite
Front: 42.0 - 43.0
Rear: 43.0 - 44.0

Tire Saucing:
Most facilities have moved towards odorless traction additives such as SXT. Some of additives evaporate very quickly and some do not. This seems to be something that is also dependent on tire compound and ambient temperature. For example, saucing a Green compound seems like it never dries, especially when tjhe temperature is lower. We have found that wiping the tires off 15 minutes before we go run allows the sauce to cure, which makes the car come in much quicker with Green rears. Blue compounds on the other hand, do fine when wiped off right before hitting the track.

Saucing half front and full rear is a good initial starting point. If the front of the car is too agressive you can sauce les than half, or for a shorter amount of time.
Tire Fuzzing:
In conditions of increasing grip, foam tires will somewtimes get sticky and pick up fuzz and debris from the track. This is highly dependent on the rubber sedan tire that is being run at your local track and the compound/ type of foam you are running on you car. The softer the sedan tire and the harder/higher rubber content in your foam tire, trouble with fuzzing seems more likely to occur.

There are ways to get around fuzzing under most conditions, and usually involves the selection of the correct foam compound. The more fuzz you get, the softer/lower rubber content you want to run.

Examples:
Problem: Car fuzzes with Lilac/Team Purple fronts and car starts pushing.
Solution: Use a softer front tire and or different family of foam. Replace it with Blue or Double Blue front.

Problem: Car loses rear bite 6 minutes into the run. Blue rear tires look almost clean but have small carpet hairs.
Solution: Use Green rear tires. The softer compound wears instead of getting sticky, minimizing fuzz.

Tire Selection:
Starting out, pick 2 tire compounds for the front and rear. The following should have you covered 99% of the time.

Front - Green and Blue (BSR) or Green and Light Blue (JFT)
Rear - Blue and Double Blue (BSR) or Blue and Dark Blue (JFT)

You may wonder about other compounds out there and if they might be better, trust me, they probably won't be. Even if there are other tires that can be as fast, the synthetic family wears out really fast and the high natural rubber will probably fuzz on you over an 8 minute run. The blends family seems to be the most versatile foam type available today. They last awhile, and sticking to them will make your process of tire selection simpler.
Tire Charts:
BSR/CRC/Jaco



Contact



Corally



JFT (Japan Foam Tire)



Ulti



Enneti (Xceed)



ELECTRONICS:
ESC:
As of now, ROAR is staying 1S (3.7V nominal; 4.2V fully charged) for 1/12. There are many 1S ESC's with a built in BEC so nothing else is required to power the receiver and servo.

If you don't want to lock yourself into a 1S specific ESC, you do have other options! It is possible to use your 2S ESC without a booster or receiver pack, and the ESC simply supplies the lower voltage. If that does not appeal to you, you will need to use an Rx pack or booster. The Rx pack and booster will both supply the receiver with a higher voltage than the 1S pack.

If you decide to use an Rx pack, MAKE SURE TO REMOVE THE RED WIRE FROM THE ESC PLUG THAT GOES INTO THE RECEIVER!!!

If you choose to use a voltage booster, it works exactly how it sounds. Instead of plugging the ESC into the receiver, it plugs into the booster, and the booster plug goes to the ESC, supplying the higher voltage.

1S ESC:
If there are any missing please add them!!

If anyone would like a need for a chart comparing the ESC's specs PM fenton06 and I'll get one made and put in here!
Voltage Boosters:
If there are any missing please add them!
Servos:
BODIES:
Black Art (CRC - US Dist):
  • Audi R8C - BA002 - .020 Thick



  • Black Market (Mohawk 12) - BA005 - .020



  • Lola B10 - BA006 - .020 thick
  • Toyota TS030 - BA008 - .020 thick

    Lola - black/red, TS030 - green/pink


PROTOForm:

Reflex Racing/RSD:

SUSPENSION ADJUSTMENTS:

Print Wikipost

Reply
 
Thread Tools Search this Thread
Old 11-11-2010, 04:02 PM   #35116
Tech Regular
 
scribbler's Avatar
 
Join Date: Feb 2009
Location: Calgary, AB
Posts: 429
Trader Rating: 1 (100%+)
Default

Quote:
Originally Posted by JayBee View Post
Got a question about diff rings- the 'indentation' that forms on the rings from the balls, is that desirable or should that be sanded out?
It usually means its time to get new diff rings. I'm not that up to date on the latest ideas though.
scribbler is offline   Reply With Quote
Old 11-11-2010, 04:15 PM   #35117
Tech Fanatic
 
BCbud's Avatar
R/C Tech Elite Subscriber
 
Join Date: Sep 2009
Location: Victoria BC Canada
Posts: 755
Trader Rating: 37 (100%+)
Default

Quote:
Originally Posted by JayBee View Post
Got a question about diff rings- the 'indentation' that forms on the rings from the balls, is that desirable or should that be sanded out?
Here is some tips on diff rebuilds.

http://markpayneblog.blogspot.com/20...erentials.html
__________________
Xray NT1 - Xray T4 2013 TC - Xray T4 2013 VTA - CRCgenX10 - CRCgenX - CRCgenXi - Slash 4X4 with LCG conversion -Associated RC8Be - Xray XB4 - DX3R PRO
Recycled teenager.
www.irocc.ca ; www.corvictoria.com ; http://www.wcics.ca/
I will not send Pay Pal as a gift or add fees to the price so DO NOT ASK!
BCbud is offline   Reply With Quote
Old 11-11-2010, 05:04 PM   #35118
Tech Master
 
mkdut's Avatar
 
Join Date: May 2006
Location: RC Retired
Posts: 1,961
Trader Rating: 19 (100%+)
Default

Quote:
Originally Posted by JayBee View Post
Got a question about diff rings- the 'indentation' that forms on the rings from the balls, is that desirable or should that be sanded out?
Are they actually grooves or just a discoloration from where your balls are wearing?(yeah I said it)
mkdut is offline   Reply With Quote
Old 11-11-2010, 05:56 PM   #35119
Tech Champion
 
gashuffer's Avatar
 
Join Date: Nov 2006
Location: RcVille
Posts: 5,230
Trader Rating: 48 (100%+)
Default

Quote:
Originally Posted by mkdut View Post
Are they actually grooves or just a discoloration from where your balls are wearing?(yeah I said it)
gashuffer is offline   Reply With Quote
Old 11-11-2010, 05:59 PM   #35120
Tech Champion
 
gashuffer's Avatar
 
Join Date: Nov 2006
Location: RcVille
Posts: 5,230
Trader Rating: 48 (100%+)
Default

I am building up a DB12RR and the term IRS parts keep coming up and all I can think of is independant rear suspension. What does it actually mean?
gashuffer is offline   Reply With Quote
Old 11-11-2010, 06:24 PM   #35121
Tech Elite
 
nashrcracer's Avatar
R/C Tech Charter Subscriber
 
Join Date: Nov 2001
Location: LA - Lower Antioch
Posts: 4,849
Trader Rating: 1 (100%+)
Default

irrgang racing services

Dave Irrgang has been in RC for years making diff parts and other assorted parts for 12th and 10th pan cars. including full cars

http://www.teamirsrc.com/
__________________
RC50 As you come into this world, something else is also born. You begin your life, and it begins a journey towards you. It moves slowly, but it never stops. Wherever you go, whatever path you take, it will follow never faster, never slower, always coming. You will run, it will walk. You will rest, it will not. One day, you will linger in the same place too long you will sit too still, or sleep too deep. And when, too late, you rise to go, you will notice a second shadow next to yours. Your life will then be over.
nashrcracer is offline   Reply With Quote
Old 11-11-2010, 07:19 PM   #35122
Tech Addict
 
pmes's Avatar
 
Join Date: Jun 2010
Location: Bismarck, ND
Posts: 515
Trader Rating: 3 (100%+)
Default

Quote:
Originally Posted by PDX-Spike View Post
The point is, LiFe onboard is plug and play. Nothing else is required. Simple and it works.
If you have a kinetic 1s, spektrum receiver and ko servo the lipo is plug and play. The point is get the right setup and you can do it.
pmes is offline   Reply With Quote
Old 11-11-2010, 07:41 PM   #35123
Tech Champion
 
JayBee's Avatar
 
Join Date: Mar 2004
Location: 12TH-MAN COUNTRY
Posts: 6,803
Trader Rating: 31 (100%+)
Default

Quote:
Originally Posted by mkdut View Post
Are they actually grooves or just a discoloration from where your balls are wearing?(yeah I said it)
.....just discoloration Mike.
__________________
R C 3 G R A F I X _ F U S I O N . G R A P H I X _ S E A T T L E - R/C - R A C E R S _ E M E R A L D C I T Y R C . C O M

A E - 12R5.2 _ S M - REV8 PRO
JayBee is offline   Reply With Quote
Old 11-11-2010, 07:59 PM   #35124
Tech Champion
 
Korey Harbke's Avatar
 
Join Date: Oct 2002
Location: Redmond, WA
Posts: 6,053
Trader Rating: 13 (100%+)
Default

Oh boy...

I usually sand it off and start fresh. You'll notice when you actually "break in" or "run in" your diff, that slight discoloration will come back. When you actually feel a GROOVE thats when its typically bad. Either way, I sand it off. Why? I'm not sure... I feel better about it :P

-Korey
__________________
Pro Spec America/Apex RC - Team ORCA - Awesomatix USA - Roche RC USA - AVID - Sweep - Protoform - Pro-One RC - Slapmaster Tools - Hebiki Design Works - Turtlemaster Racing - Seattle RC Racers - Timezone Hobbies
Korey Harbke is offline   Reply With Quote
Old 11-11-2010, 10:32 PM   #35125
Tech Master
 
EricF's Avatar
 
Join Date: Jun 2003
Location: AZ
Posts: 1,515
Default

Quote:
Originally Posted by gashuffer View Post
This may have been the funniest thing I've read on the net today.
E
__________________
<
AE 12R5.2 (x2) - TC7 - M05 - M05V2R

People who don't have to wait for the latest item, should not tell those that do, that "It's worth the wait"
EricF is offline   Reply With Quote
Old 11-12-2010, 02:44 AM   #35126
avs
Tech Master
 
avs's Avatar
 
Join Date: Jul 2006
Posts: 1,144
Trader Rating: 2 (100%+)
Default

Quote:
Originally Posted by adam lancia View Post
Just a couple of ideas
yes, that is a clever use of the BEC in the speedo. i guess you don't have to recharge your receiver pack more than once a week?

it never occured to me before, but how big a lipo receiver pack can you use before the sanctioning body demands it be in a hardcase?
__________________
Tony Shimko
avs is offline   Reply With Quote
Old 11-12-2010, 04:47 AM   #35127
Tech Champion
 
Radio Active's Avatar
 
Join Date: Jun 2003
Location: Newcastle, Australia
Posts: 6,994
Trader Rating: 2 (100%+)
Default

Sorry for the 101 question but...

How do I wire in a receiver, receiver pack and transponder in the simplest possible way? (A diagram would be really nice.)

For information it is a 4 cell car, using a KO FM receiver, and Novak Atom ESC (Yes, I'm using a brushed motor don't ask).

I may also have the use of a voltage booster, but assume I don't to begin with.
__________________
Reigning NSW 4WD Group 20 Champion
Member: Maitland Radio Car Club (http://www.morcc.com.au)
twitter: @dvcotton
Australian 12th Scale hastag: #EP12AU
Radio Active is offline   Reply With Quote
Old 11-12-2010, 05:37 AM   #35128
Tech Regular
 
Join Date: Oct 2008
Location: Central Indiana
Posts: 355
Trader Rating: 6 (100%+)
Default

Quote:
Originally Posted by pmes View Post
If you have a kinetic 1s, spektrum receiver and ko servo the lipo is plug and play. The point is get the right setup and you can do it.
The unfortunate thing about your post is that the guys in my area with the Novak 1s get smoked on the track because the software doesn't allow it to perform like a Tekin or black diamond yet.

They are getting closer but not yet.
racer357 is offline   Reply With Quote
Old 11-12-2010, 05:56 AM   #35129
Tech Adept
 
Join Date: Jan 2009
Posts: 130
Default

Quote:
Originally Posted by VRacing View Post
My understanding is that for stock 1/12 - (especially with the spec mode now) those cars probably can't overtax a 40C. The modified is where you want to step up the "C" rating. If you have questions - talk to Jeff @ Fantom, he is always very helpful. They have a 5400mah 65C that would give you the juice for a mod setup. Look here.

http://www.fantomracing.com/proddeta...?prod=FAN27609
Thanks... Will check it out

__________________
Corally PHI/PHI 09 TEAM DRIVER
BMI DB12RR TEAM DRIVER
TOP
LRP TC SXX, LRP SXX Ver. 2, LRP X12 Octa, Futaba 3PKS Spektrum Module, Protform.
SOUTH AFRICA :)
PHI/BMI racer is offline   Reply With Quote
Old 11-12-2010, 07:49 AM   #35130
Tech Addict
 
pmes's Avatar
 
Join Date: Jun 2010
Location: Bismarck, ND
Posts: 515
Trader Rating: 3 (100%+)
Default

Quote:
Originally Posted by racer357 View Post
The unfortunate thing about your post is that the guys in my area with the Novak 1s get smoked on the track because the software doesn't allow it to perform like a Tekin or black diamond yet.

They are getting closer but not yet.
It's not the drivers? Either way the Kinetic throttle response feels so much more linear to me. My Tekin feels like I'm pulling my finger through mashed potatoes no matter what throttle curve I set it to.

I may be wrong about the wiring thing as it appears Novak is using something similar to the schematic above to utilize the ESC BEC. I'm not sure what kind of strange things may happen if you feed 8.4v back to the Kinetic through the receiver wires.
pmes is offline   Reply With Quote
Reply

Similar Threads
Thread Thread Starter Forum Replies Last Post
New to the forum mig rod Electric Off-Road 1 01-05-2008 05:23 PM
hi i need help and im new to the forum racer4 Rookie Zone 4 01-21-2007 02:37 PM
Why is this forum listed under the On Road Forum? sport10 Onroad Nitro Engine Zone 0 01-11-2007 08:06 AM
Forum Changes... futureal Wisconsin & Illinois Racing 3 10-28-2002 09:26 PM



Currently Active Users Viewing This Thread: 2 (0 members and 2 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off



All times are GMT -7. It is currently 03:27 PM.


Powered By: vBulletin v3.9.2.1
Privacy Policy | Terms of Use | Advertise Content © 2001-2011 RCTech.net

SEO by vBSEO 3.5.0