R/C Tech Forums

Go Back   R/C Tech Forums > General Forums > Electric On-Road

    Hide Wikipost
Old 10-28-2016, 12:43 PM   -   Wikipost
R/C Tech Forums Thread Wiki: 1/12 forum
Please read: This is a community-maintained wiki post containing the most important information from this thread. You may edit the Wiki once you have been a member for 90 days and have made 90 posts.
 
Last edit by: fenton06
This is a place to share knowledge related to 1/12th scale racing. It is not to be used for conversations.

KITS:
Click links to go to manufacturer product page. If any are missing please add them!

TIRES:
Pre-mounted tires readily available in the US:
Pre-mounted tires readily available in the Europe:
  • Hot Race ??

Gluing your own donuts:
https://www.youtube.com/watch?v=hm7z1rz-74s - Special thanks to Edward Pickering!
Truing tires:
https://www.youtube.com/watch?v=8wqHOLWq6Uc - Special thanks to Edward Pickering!

The following information came from HERE, with some editing and information added. Thanks Christian!

THIS MAY NEED UPDATING FOR THE NEW BLACK CRC CARPET

Brands:
BSR, CRC, Jaco:
Pro One is no longer selling to the public, but it and the brands above are all mounted by BSR and use the same foam. The nomenclature of the BSR vs Jaco/CRC is a little different in a few instances but is otherwise the same. The BSR foam consists of three families, and can be identifed as synthetics, naturals, and blends.

Synthetics - The old school, light weight, easy to true "dry feeling" tires. These include tires like CRC/Jaco Yellow (BSR White), Black, Gray, etc. These tires offer the highest wear rate and lowest grip. Many racers continue to use these nder high bite conditions.

Naturals - These tires are usually the best alternative for low bite and asphalt. They include Pink, Magenta, Double Pink, Lilac (BSR Team Purple), Purple, and other tires. These tires provide a ton of grip, but tend to get sticky in high bite conditions. This rubber does not wear as easily, and the cars will pick up gunk and fibers from the carpet under most high bite conditions. This is especially bad if the humidity is high.

Blends - These are the tires most people run today. They were initially called "JFT foam" by some, as it was believed that the tires were the same as the JFT tires. We can divide the blends further into two groups: high rubber and low rubber content. The high rubber would be the new rear Orange and Red from the BSR family, and the low rubber would be the Green and Blue varieties. When, asked about the difference, John Foister from BSR Tires said they came from the same "family" of foam, but they offered different grip. According to John, the Green/Blue has more bite than Orange/Red, but from track testing Oranges offer more bite than Green (being equivalent to in hardness) when the grip is high and absolutely no grip when it is lower. The Orange foam has a denser pore structure and the tire is not as prone to chunking. It is also important to note is that BSR Blue rears are not the same as the BSR Blue fronts!

JFT:
JFT stands for Japan Foam Tire. They started the new wave of foam tires we are all using now (Blue/Blu, Green/Greene, Dbl Blue, etc). These tires are a little different than the BSR tire family, but work in very similar conditions. They offers four varieties A (asphalt), C (carpet), S (???), and R (???). This does not mean that those types only work on that surface, but this is what they recommend.

JFT uses the same foam for fronts and rears if the color is the same.

A: Used on asphalt, considered close to the natural rubber variety and are named consistently with other natural tires.
C: Used on carpet, considered a blend.
S: Used on carpet?, tires are ???
R: Used on carpet?, tires are ???

For setup, the JFT foam seem to generate more bite than the BSR, therefore the car tends to be a little more aggressive.

Ulti:
Ulti is another Japanese brand that offers an array of compounds. They have their own way of rating tires, and are difficult to equate to other brands. They have 4 different varieties, each in varying degrees of hardness.

J: High rubber content tire, similar to Pink/ Magenta. Soft would be close to a pink. These offer the most bite and are great for asphalt/carpet front tire. (J hard being very popular)
X: "Balanced" blend, similar to JFT Blue/ Green. Soft is equivalent to Green, medium to Blue in hardness. Great for carpet!
Y: High synthetic blend with lower grip, and is not a very popular variety.
Z: A very expensive "special" foam that is supposed to be magic on asphalt. Only make it in soft shore.
European tires:
There are many great European foam tire brands that use their own types of foam, as well as traditional foams. SOmeone with more knowledge about them will need to fill this in!

Tire Diameter:
If you are racing on carpet, you have to evaluate how much grip your track has. If your track is low to medium grip, you can run bigger tires. If you are on higher bite you have to cut them smaller, there is simply no way around it. Bigger tires are needed for asphalt, especially in the rear. The larger tires provide much needed lateral bite.

Carpet (mm):
Low - Medium Bite
Front: 42.0 - 42.5
Rear: 42.5 - 43.00
Medium - High Bite
Front: 40.5 - 41.0
Rear: 41.5 - 42.0
Big Race
Front: 39.5 - 40.0
Rear: 40.5 - 41.0
Asphalt (mm):
Parking Lot
Front: 43.0 - 44.0
Rear: 44.0 - 45.0
Prepped High Bite
Front: 42.0 - 43.0
Rear: 43.0 - 44.0

Tire Saucing:
Most facilities have moved towards odorless traction additives such as SXT. Some of additives evaporate very quickly and some do not. This seems to be something that is also dependent on tire compound and ambient temperature. For example, saucing a Green compound seems like it never dries, especially when tjhe temperature is lower. We have found that wiping the tires off 15 minutes before we go run allows the sauce to cure, which makes the car come in much quicker with Green rears. Blue compounds on the other hand, do fine when wiped off right before hitting the track.

Saucing half front and full rear is a good initial starting point. If the front of the car is too agressive you can sauce les than half, or for a shorter amount of time.
Tire Fuzzing:
In conditions of increasing grip, foam tires will somewtimes get sticky and pick up fuzz and debris from the track. This is highly dependent on the rubber sedan tire that is being run at your local track and the compound/ type of foam you are running on you car. The softer the sedan tire and the harder/higher rubber content in your foam tire, trouble with fuzzing seems more likely to occur.

There are ways to get around fuzzing under most conditions, and usually involves the selection of the correct foam compound. The more fuzz you get, the softer/lower rubber content you want to run.

Examples:
Problem: Car fuzzes with Lilac/Team Purple fronts and car starts pushing.
Solution: Use a softer front tire and or different family of foam. Replace it with Blue or Double Blue front.

Problem: Car loses rear bite 6 minutes into the run. Blue rear tires look almost clean but have small carpet hairs.
Solution: Use Green rear tires. The softer compound wears instead of getting sticky, minimizing fuzz.

Tire Selection:
Starting out, pick 2 tire compounds for the front and rear. The following should have you covered 99% of the time.

Front - Green and Blue (BSR) or Green and Light Blue (JFT)
Rear - Blue and Double Blue (BSR) or Blue and Dark Blue (JFT)

You may wonder about other compounds out there and if they might be better, trust me, they probably won't be. Even if there are other tires that can be as fast, the synthetic family wears out really fast and the high natural rubber will probably fuzz on you over an 8 minute run. The blends family seems to be the most versatile foam type available today. They last awhile, and sticking to them will make your process of tire selection simpler.
Tire Charts:
BSR/CRC/Jaco



Contact



Corally



JFT (Japan Foam Tire)



Ulti



Enneti (Xceed)



ELECTRONICS:
ESC:
As of now, ROAR is staying 1S (3.7V nominal; 4.2V fully charged) for 1/12. There are many 1S ESC's with a built in BEC so nothing else is required to power the receiver and servo.

If you don't want to lock yourself into a 1S specific ESC, you do have other options! It is possible to use your 2S ESC without a booster or receiver pack, and the ESC simply supplies the lower voltage. If that does not appeal to you, you will need to use an Rx pack or booster. The Rx pack and booster will both supply the receiver with a higher voltage than the 1S pack.

If you decide to use an Rx pack, MAKE SURE TO REMOVE THE RED WIRE FROM THE ESC PLUG THAT GOES INTO THE RECEIVER!!!

If you choose to use a voltage booster, it works exactly how it sounds. Instead of plugging the ESC into the receiver, it plugs into the booster, and the booster plug goes to the ESC, supplying the higher voltage.

1S ESC:
If there are any missing please add them!!

If anyone would like a need for a chart comparing the ESC's specs PM fenton06 and I'll get one made and put in here!
Voltage Boosters:
If there are any missing please add them!
Servos:
BODIES:
Black Art (CRC - US Dist):
  • Audi R8C - BA002 - .020 Thick



  • Black Market (Mohawk 12) - BA005 - .020



  • Lola B10 - BA006 - .020 thick
  • Toyota TS030 - BA008 - .020 thick

    Lola - black/red, TS030 - green/pink


PROTOForm:

Reflex Racing/RSD:

SUSPENSION ADJUSTMENTS:

Print Wikipost

Reply
 
Thread Tools Search this Thread
Old 08-25-2009, 02:10 PM   #31891
Tech Prophet
 
Casper's Avatar
 
Join Date: Aug 2004
Location: Orange, Ca
Posts: 17,270
Trader Rating: 33 (100%+)
Default

BMI makes a 58T 48P spur.
__________________
TLR/Losi Team Driver
TLR/Losi | Tekin | Venom | DE Racing | Spektrum | Exotek | JBRL | Kolor Koncepts | OC/RC |Sticky Kicks | Imagine It Graphics | Casper-RC.com
TLR 22 3.0, TLR 22SCT 2.0, TLR 22-4 2.0, TLR Ten-SCTE 3.0, Spektrum DX6R

WWW.CASPER-RC.COM TLR and Tekin setups
Casper is offline   Reply With Quote
Old 08-25-2009, 05:04 PM   #31892
Tech Elite
 
Bob-Stormer's Avatar
 
Join Date: Dec 2001
Location: Glasgow, Montana USA
Posts: 3,512
Trader Rating: 8 (100%+)
Default

Quote:
Originally Posted by Scottrik View Post
I know Bob has a great time racing with you guys.
It's true, eh.
__________________
www.stormerhobbies.com "Where the world shops for radio control."
www.facebook.com/stormerhobbies
www.twitter.com/stormerhobbies

looking for....vintage 1/10-1/12 pan, need Schumacher 1/12th cars and parts.
Bob-Stormer is offline   Reply With Quote
Old 08-25-2009, 06:13 PM   #31893
Tech Master
 
Danny-b23's Avatar
 
Join Date: Feb 2009
Location: Saskatoon, SK, Canada
Posts: 1,210
Trader Rating: 3 (100%+)
Default

Quote:
Originally Posted by Bob-Stormer View Post
It's true, eh.
You going to run 12th Mod at WCICS this year?
__________________
RC America|EA Motorsports|ORCA
Danny Buck
WCICS Rep - Round 1, Saskatoon, SK
Danny-b23 is offline   Reply With Quote
Old 08-25-2009, 06:37 PM   #31894
Tech Elite
 
Bob-Stormer's Avatar
 
Join Date: Dec 2001
Location: Glasgow, Montana USA
Posts: 3,512
Trader Rating: 8 (100%+)
Default

Quote:
Originally Posted by Danny-b23 View Post
You going to run 12th Mod at WCICS this year?
Hope to.

Got to get Evan his "get into Canada" credentials back first. Randon is heading off to Missoula in a few days, so I got no traveling buddy.
__________________
www.stormerhobbies.com "Where the world shops for radio control."
www.facebook.com/stormerhobbies
www.twitter.com/stormerhobbies

looking for....vintage 1/10-1/12 pan, need Schumacher 1/12th cars and parts.
Bob-Stormer is offline   Reply With Quote
Old 08-25-2009, 06:42 PM   #31895
Tech Champion
 
Scottrik's Avatar
 
Join Date: Sep 2004
Location: Billings, MT
Posts: 6,119
Trader Rating: 237 (100%+)
Default

Quote:
Originally Posted by Bob-Stormer View Post
I got no traveling buddy.
Yeah you do!! I'll volunteer.
Scottrik is offline   Reply With Quote
Old 08-25-2009, 07:08 PM   #31896
Tech Elite
 
Bob-Stormer's Avatar
 
Join Date: Dec 2001
Location: Glasgow, Montana USA
Posts: 3,512
Trader Rating: 8 (100%+)
Default

Quote:
Originally Posted by Scottrik View Post
Yeah you do!! I'll volunteer.
__________________
www.stormerhobbies.com "Where the world shops for radio control."
www.facebook.com/stormerhobbies
www.twitter.com/stormerhobbies

looking for....vintage 1/10-1/12 pan, need Schumacher 1/12th cars and parts.
Bob-Stormer is offline   Reply With Quote
Old 08-25-2009, 09:01 PM   #31897
Tech Elite
 
Grenade10's Avatar
 
Join Date: Nov 2003
Location: Fort Collins, Colorado
Posts: 4,667
Trader Rating: 37 (100%+)
Default

Quote:
Originally Posted by Scottrik View Post
That's fine on your own but leaving the inside THAT exposed when you're dicing for position is just BEGGING somebody to barge up the inside and either a) take the line away from you (best that can happen), or b) drill you in the side as you turn in.
Hey I thought we were over that Move!!!
__________________
Darkside, Sweep, BSR, Fantom, IGT Hobbies and IGT8
Byrons Fuel, ProtoForm Bodies & Futaba Radio Gear by Choice
Founding Member of CORRC .... 5280raceway
www.darksidems.com www.igthobbies.com www.IGT8.com
Grenade10 is offline   Reply With Quote
Old 08-25-2009, 09:09 PM   #31898
Tech Master
 
HB Moose's Avatar
 
Join Date: Oct 2003
Location: Surf City, USA
Posts: 1,067
Default

Quote:
Originally Posted by Danny-b23 View Post
Anybody have any idea where I can get some retardedly small 48p spur gears?
Like smaller then the Kimbrough 69T. 72mm rollout has me running a 32T pinion. I don't even think I can fit that on a 3.2R.
Robinson Racing has them down to 60 then as Casper said there is the BMI @ 58.
__________________
Bruce "Moose" Riedinger
HB Moose is offline   Reply With Quote
Old 08-25-2009, 09:51 PM   #31899
Tech Master
 
rcjunkie3000's Avatar
 
Join Date: Dec 2007
Location: NORCAL
Posts: 1,072
Trader Rating: 94 (100%+)
Default

Cain, also check www.nexusracing.com. Here's a direct link to the CRC Gen X 12 items:

http://www.nexusracing.com/index.php?cPath=137_344
__________________
RCJunkie3000 - Gonzo69 Paints / Lex Tyler Paints / Norcal Hobbies
http://www.rctech.net/forum/r-c-items-sale-trade/344416-rcjunkie3000s-garage-sale-batteries-escs-chargers-cars-accessories-etc.html
rcjunkie3000 is offline   Reply With Quote
Old 08-26-2009, 07:55 AM   #31900
Tech Elite
 
Join Date: Oct 2002
Location: Mclean, VA
Posts: 3,940
Trader Rating: 45 (100%+)
Default

Don't know if anyone can answer this, but I'll give it a shot on this thread since this is the class that is using 1S LiPO's.

I have a Hyperion 0606i charger and just recently bought some of the SMC 4900 40C 1S LiPO's. I won't be using them for a month or so and wanted to run a Store charge on them with the Hyperion. When I start the Store charge it verifies there is no balancer connected, but then gets stuck in the battery check wait status and continues to beep. I was thinking maybe there is a problem with the battery. To verify this I ran a normal charge on it and it charges fine.

Anyone know what's going on here?
Apex is offline   Reply With Quote
Old 08-26-2009, 07:58 AM   #31901
Tech Legend
 
Cain's Avatar
 
Join Date: May 2002
Location: West Fargo, North Dakota
Posts: 26,473
Trader Rating: 206 (100%+)
Default

Is it waiting for you for some sort of interaction? I know on the hyperion duo the latest firmware set it to tick down and then start the charge. Maybe a firmware issue?
__________________
< Team Associated RC10B6D>
< Durango DESC410V2, DEX410V5>
Cain is offline   Reply With Quote
Old 08-26-2009, 08:08 AM   #31902
Tech Elite
 
Join Date: Oct 2002
Location: Mclean, VA
Posts: 3,940
Trader Rating: 45 (100%+)
Default

Quote:
Originally Posted by Cain View Post
Is it waiting for you for some sort of interaction? I know on the hyperion duo the latest firmware set it to tick down and then start the charge. Maybe a firmware issue?
Well, it doesn't look like the 0606i has any firmware updates.

The "tick down", is it a series of beeps and then starts the charge?

Maybe I just need to let it beep for a while and see what happens.
Apex is offline   Reply With Quote
Old 08-26-2009, 08:14 AM   #31903
Tech Legend
 
Cain's Avatar
 
Join Date: May 2002
Location: West Fargo, North Dakota
Posts: 26,473
Trader Rating: 206 (100%+)
Default

Well, on the hyperion duo I have it actually is a count down saying its confirming the number of cells or voltage and if its ok to start the charge. Before my last update, it would just wait for me to press mode to start I believe. Now it just ticks down then starts. Its a 9 second tick down.

What are opinions on the following 17.5T motors, namely fit in CRC Gen X with brushless rear pod and performance:

- LRP X-11
- Tekin Redline
- Novak Ballistic
- Hacker

This would be used with a Speed Passion GT 2.0 ESC.
__________________
< Team Associated RC10B6D>
< Durango DESC410V2, DEX410V5>

Last edited by Cain; 08-26-2009 at 10:07 AM.
Cain is offline   Reply With Quote
Old 08-26-2009, 04:18 PM   #31904
Tech Champion
 
Scottrik's Avatar
 
Join Date: Sep 2004
Location: Billings, MT
Posts: 6,119
Trader Rating: 237 (100%+)
Default

Quote:
Originally Posted by Apex View Post
just recently bought some of the SMC 4900 40C 1S LiPO's. I won't be using them for a month or so and wanted to run a Store charge on them
Keep in mind that, unlike the NiMH batteries of the last several years, as far as a LiPo is concerned "a month or so" isn't "storage"...it's just a little break between races.
Scottrik is offline   Reply With Quote
Old 08-26-2009, 04:31 PM   #31905
Tech Elite
 
andrewdoherty's Avatar
 
Join Date: Jan 2005
Location: ★Wylie, TX★
Posts: 3,763
Trader Rating: 47 (100%+)
Default

My hyperion 0606i won't put a storage charge in the 1 cell lipos wither. I have 8 packs, 4 brand new and 4 older, and they all do the same thing. I think the software requires you have the balancer plugged into the battery to use the storage feature.
__________________
"Whether you think you can, or think you can't, you're right." -Henry Ford
"[Driving] Genius is 1% inspiration, and 99% perspiration" -T.A. Edison
|◤Hobbywing◢|◤SpeedzoneUSA.com◢|◤Pro-One◢|
|◤ReflexRacing.net◢|◤Protoform◢|◤AVID R/C◢|
andrewdoherty is offline   Reply With Quote
Reply

Similar Threads
Thread Thread Starter Forum Replies Last Post
New to the forum mig rod Electric Off-Road 1 01-05-2008 05:23 PM
hi i need help and im new to the forum racer4 Rookie Zone 4 01-21-2007 02:37 PM
Why is this forum listed under the On Road Forum? sport10 Onroad Nitro Engine Zone 0 01-11-2007 08:06 AM
Forum Changes... futureal Wisconsin & Illinois Racing 3 10-28-2002 09:26 PM



Currently Active Users Viewing This Thread: 3 (0 members and 3 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off



All times are GMT -7. It is currently 10:50 AM.


Powered By: vBulletin v3.9.2.1
Privacy Policy | Terms of Use | Advertise Content © 2001-2011 RCTech.net

SEO by vBSEO 3.5.0