R/C Tech Forums

Go Back   R/C Tech Forums > General Forums > Electric On-Road

    Hide Wikipost
Old 10-28-2016, 12:43 PM   -   Wikipost
R/C Tech Forums Thread Wiki: 1/12 forum
Please read: This is a community-maintained wiki post containing the most important information from this thread. You may edit the Wiki once you have been a member for 90 days and have made 90 posts.
 
Last edit by: fenton06
This is a place to share knowledge related to 1/12th scale racing. It is not to be used for conversations.

KITS:
Click links to go to manufacturer product page. If any are missing please add them!

TIRES:
Pre-mounted tires readily available in the US:
Pre-mounted tires readily available in the Europe:
  • Hot Race ??

Gluing your own donuts:
https://www.youtube.com/watch?v=hm7z1rz-74s - Special thanks to Edward Pickering!
Truing tires:
https://www.youtube.com/watch?v=8wqHOLWq6Uc - Special thanks to Edward Pickering!

The following information came from HERE, with some editing and information added. Thanks Christian!

THIS MAY NEED UPDATING FOR THE NEW BLACK CRC CARPET

Brands:
BSR, CRC, Jaco:
Pro One is no longer selling to the public, but it and the brands above are all mounted by BSR and use the same foam. The nomenclature of the BSR vs Jaco/CRC is a little different in a few instances but is otherwise the same. The BSR foam consists of three families, and can be identifed as synthetics, naturals, and blends.

Synthetics - The old school, light weight, easy to true "dry feeling" tires. These include tires like CRC/Jaco Yellow (BSR White), Black, Gray, etc. These tires offer the highest wear rate and lowest grip. Many racers continue to use these nder high bite conditions.

Naturals - These tires are usually the best alternative for low bite and asphalt. They include Pink, Magenta, Double Pink, Lilac (BSR Team Purple), Purple, and other tires. These tires provide a ton of grip, but tend to get sticky in high bite conditions. This rubber does not wear as easily, and the cars will pick up gunk and fibers from the carpet under most high bite conditions. This is especially bad if the humidity is high.

Blends - These are the tires most people run today. They were initially called "JFT foam" by some, as it was believed that the tires were the same as the JFT tires. We can divide the blends further into two groups: high rubber and low rubber content. The high rubber would be the new rear Orange and Red from the BSR family, and the low rubber would be the Green and Blue varieties. When, asked about the difference, John Foister from BSR Tires said they came from the same "family" of foam, but they offered different grip. According to John, the Green/Blue has more bite than Orange/Red, but from track testing Oranges offer more bite than Green (being equivalent to in hardness) when the grip is high and absolutely no grip when it is lower. The Orange foam has a denser pore structure and the tire is not as prone to chunking. It is also important to note is that BSR Blue rears are not the same as the BSR Blue fronts!

JFT:
JFT stands for Japan Foam Tire. They started the new wave of foam tires we are all using now (Blue/Blu, Green/Greene, Dbl Blue, etc). These tires are a little different than the BSR tire family, but work in very similar conditions. They offers four varieties A (asphalt), C (carpet), S (???), and R (???). This does not mean that those types only work on that surface, but this is what they recommend.

JFT uses the same foam for fronts and rears if the color is the same.

A: Used on asphalt, considered close to the natural rubber variety and are named consistently with other natural tires.
C: Used on carpet, considered a blend.
S: Used on carpet?, tires are ???
R: Used on carpet?, tires are ???

For setup, the JFT foam seem to generate more bite than the BSR, therefore the car tends to be a little more aggressive.

Ulti:
Ulti is another Japanese brand that offers an array of compounds. They have their own way of rating tires, and are difficult to equate to other brands. They have 4 different varieties, each in varying degrees of hardness.

J: High rubber content tire, similar to Pink/ Magenta. Soft would be close to a pink. These offer the most bite and are great for asphalt/carpet front tire. (J hard being very popular)
X: "Balanced" blend, similar to JFT Blue/ Green. Soft is equivalent to Green, medium to Blue in hardness. Great for carpet!
Y: High synthetic blend with lower grip, and is not a very popular variety.
Z: A very expensive "special" foam that is supposed to be magic on asphalt. Only make it in soft shore.
European tires:
There are many great European foam tire brands that use their own types of foam, as well as traditional foams. SOmeone with more knowledge about them will need to fill this in!

Tire Diameter:
If you are racing on carpet, you have to evaluate how much grip your track has. If your track is low to medium grip, you can run bigger tires. If you are on higher bite you have to cut them smaller, there is simply no way around it. Bigger tires are needed for asphalt, especially in the rear. The larger tires provide much needed lateral bite.

Carpet (mm):
Low - Medium Bite
Front: 42.0 - 42.5
Rear: 42.5 - 43.00
Medium - High Bite
Front: 40.5 - 41.0
Rear: 41.5 - 42.0
Big Race
Front: 39.5 - 40.0
Rear: 40.5 - 41.0
Asphalt (mm):
Parking Lot
Front: 43.0 - 44.0
Rear: 44.0 - 45.0
Prepped High Bite
Front: 42.0 - 43.0
Rear: 43.0 - 44.0

Tire Saucing:
Most facilities have moved towards odorless traction additives such as SXT. Some of additives evaporate very quickly and some do not. This seems to be something that is also dependent on tire compound and ambient temperature. For example, saucing a Green compound seems like it never dries, especially when tjhe temperature is lower. We have found that wiping the tires off 15 minutes before we go run allows the sauce to cure, which makes the car come in much quicker with Green rears. Blue compounds on the other hand, do fine when wiped off right before hitting the track.

Saucing half front and full rear is a good initial starting point. If the front of the car is too agressive you can sauce les than half, or for a shorter amount of time.
Tire Fuzzing:
In conditions of increasing grip, foam tires will somewtimes get sticky and pick up fuzz and debris from the track. This is highly dependent on the rubber sedan tire that is being run at your local track and the compound/ type of foam you are running on you car. The softer the sedan tire and the harder/higher rubber content in your foam tire, trouble with fuzzing seems more likely to occur.

There are ways to get around fuzzing under most conditions, and usually involves the selection of the correct foam compound. The more fuzz you get, the softer/lower rubber content you want to run.

Examples:
Problem: Car fuzzes with Lilac/Team Purple fronts and car starts pushing.
Solution: Use a softer front tire and or different family of foam. Replace it with Blue or Double Blue front.

Problem: Car loses rear bite 6 minutes into the run. Blue rear tires look almost clean but have small carpet hairs.
Solution: Use Green rear tires. The softer compound wears instead of getting sticky, minimizing fuzz.

Tire Selection:
Starting out, pick 2 tire compounds for the front and rear. The following should have you covered 99% of the time.

Front - Green and Blue (BSR) or Green and Light Blue (JFT)
Rear - Blue and Double Blue (BSR) or Blue and Dark Blue (JFT)

You may wonder about other compounds out there and if they might be better, trust me, they probably won't be. Even if there are other tires that can be as fast, the synthetic family wears out really fast and the high natural rubber will probably fuzz on you over an 8 minute run. The blends family seems to be the most versatile foam type available today. They last awhile, and sticking to them will make your process of tire selection simpler.
Tire Charts:
BSR/CRC/Jaco



Contact



Corally



JFT (Japan Foam Tire)



Ulti



Enneti (Xceed)



ELECTRONICS:
ESC:
As of now, ROAR is staying 1S (3.7V nominal; 4.2V fully charged) for 1/12. There are many 1S ESC's with a built in BEC so nothing else is required to power the receiver and servo.

If you don't want to lock yourself into a 1S specific ESC, you do have other options! It is possible to use your 2S ESC without a booster or receiver pack, and the ESC simply supplies the lower voltage. If that does not appeal to you, you will need to use an Rx pack or booster. The Rx pack and booster will both supply the receiver with a higher voltage than the 1S pack.

If you decide to use an Rx pack, MAKE SURE TO REMOVE THE RED WIRE FROM THE ESC PLUG THAT GOES INTO THE RECEIVER!!!

If you choose to use a voltage booster, it works exactly how it sounds. Instead of plugging the ESC into the receiver, it plugs into the booster, and the booster plug goes to the ESC, supplying the higher voltage.

1S ESC:
If there are any missing please add them!!

If anyone would like a need for a chart comparing the ESC's specs PM fenton06 and I'll get one made and put in here!
Voltage Boosters:
If there are any missing please add them!
Servos:
BODIES:
Black Art (CRC - US Dist):
  • Audi R8C - BA002 - .020 Thick



  • Black Market (Mohawk 12) - BA005 - .020



  • Lola B10 - BA006 - .020 thick
  • Toyota TS030 - BA008 - .020 thick

    Lola - black/red, TS030 - green/pink


PROTOForm:

Reflex Racing/RSD:

SUSPENSION ADJUSTMENTS:

Print Wikipost

Reply
 
Thread Tools Search this Thread
Old 05-20-2009, 07:14 PM   #31441
Tech Master
 
CanyonCarverR1's Avatar
 
Join Date: Jan 2008
Location: NorCal
Posts: 1,340
Trader Rating: 13 (100%+)
Default

Is this the battery you guys are using?
Attached Thumbnails
1/12 forum-smc-1c.jpg  
CanyonCarverR1 is offline   Reply With Quote
Old 05-20-2009, 07:24 PM   #31442
Tech Master
 
Join Date: Nov 2003
Location: Arlington, Texas
Posts: 1,052
Trader Rating: 16 (94%+)
Default

Quote:
Originally Posted by CanyonCarverR1 View Post
Is this the battery you guys are using?
Yep, thats the one.
__________________
KSN
kn7671 is offline   Reply With Quote
Old 05-20-2009, 08:58 PM   #31443
Tech Master
 
CarlosG.'s Avatar
 
Join Date: Jul 2004
Location: Falls City,TX
Posts: 1,145
Trader Rating: 12 (100%+)
Send a message via Yahoo to CarlosG.
Default

All, I know is by August at the latest, we 12th scale racers down here In San Antonio will be up and running 13.5 and 1s LiPo for our stock class. Although by ROAR's definition it is not stock, but it will be close but not equivilant to 4 cell /17.5. We thought about 17.5/1s but for us here it would be to slow in the back straight-away.

Hey Yang, were are my tires????
CarlosG. is offline   Reply With Quote
Old 05-20-2009, 09:12 PM   #31444
Tech Elite
 
theisgroup's Avatar
 
Join Date: Apr 2002
Posts: 3,191
Trader Rating: 10 (100%+)
Default

Quote:
Originally Posted by CarlosG. View Post
All, I know is by August at the latest, we 12th scale racers down here In San Antonio will be up and running 13.5 and 1s LiPo for our stock class. Although by ROAR's definition it is not stock, but it will be close but not equivilant to 4 cell /17.5. We thought about 17.5/1s but for us here it would be to slow in the back straight-away.

Hey Yang, were are my tires????
in a box on my desk.
__________________
yang lai

Team Tamale | Team Tekin | RCAmerica | Speedmerchant | Speedzone RC | EA Motorsports | Ko Propo USA | eXpress Motorsports | Parma/PSE
theisgroup is offline   Reply With Quote
Old 05-21-2009, 01:09 AM   #31445
Tech Prophet
 
Casper's Avatar
 
Join Date: Aug 2004
Location: Orange, Ca
Posts: 17,275
Trader Rating: 33 (100%+)
Default

Quote:
Originally Posted by kn7671 View Post
17.5 Rollout with 1-cell LiPo is around 100mm +/- 5.
I will keep that in my back pocket but I just learned tonight they will be running 1S with 13.5 against 17.5 round at our club. sooooo

Rollout for 1S 13.5 as well if you got it! Thanks!!!!
__________________
TLR/Losi Team Driver
TLR/Losi | Tekin | Venom | DE Racing | Spektrum | Exotek | JBRL | Kolor Koncepts | OC/RC |Sticky Kicks | Imagine It Graphics | Casper-RC.com
TLR 22 3.0, TLR 22SCT 2.0, TLR 22-4 2.0, TLR Ten-SCTE 3.0, Spektrum DX6R

WWW.CASPER-RC.COM TLR and Tekin setups
Casper is offline   Reply With Quote
Old 05-21-2009, 06:06 AM   #31446
Tech Master
 
Join Date: Nov 2003
Location: Arlington, Texas
Posts: 1,052
Trader Rating: 16 (94%+)
Default

Quote:
Originally Posted by Casper View Post
Rollout for 1S 13.5 as well if you got it! Thanks!!!!
Around 85mm +/- 5mm for 13.5 1-Cell LiPo.
__________________
KSN
kn7671 is offline   Reply With Quote
Old 05-21-2009, 06:13 AM   #31447
Tech Elite
 
theisgroup's Avatar
 
Join Date: Apr 2002
Posts: 3,191
Trader Rating: 10 (100%+)
Default

anywhere from 85mm to 95mm. it all depends on motor and speedo.
__________________
yang lai

Team Tamale | Team Tekin | RCAmerica | Speedmerchant | Speedzone RC | EA Motorsports | Ko Propo USA | eXpress Motorsports | Parma/PSE
theisgroup is offline   Reply With Quote
Old 05-21-2009, 07:17 AM   #31448
Tech Regular
 
TrevCoult's Avatar
 
Join Date: Sep 2008
Location: Worksop, Nottinghamshire, UK
Posts: 350
Default

I've just put a short review of the CRC super soft sensor wire up on www.carsrcracing.co.uk.

Trev
__________________
Schumacher Atom GT12
Schumacher Eclipse 12th
www.carsrcracing.co.uk
CARSrcracing.co.uk Webmaster
Schumacher Racing
TrevCoult is offline   Reply With Quote
Old 05-21-2009, 07:40 AM   #31449
Tech Prophet
 
Casper's Avatar
 
Join Date: Aug 2004
Location: Orange, Ca
Posts: 17,275
Trader Rating: 33 (100%+)
Default

Thanks guys!
__________________
TLR/Losi Team Driver
TLR/Losi | Tekin | Venom | DE Racing | Spektrum | Exotek | JBRL | Kolor Koncepts | OC/RC |Sticky Kicks | Imagine It Graphics | Casper-RC.com
TLR 22 3.0, TLR 22SCT 2.0, TLR 22-4 2.0, TLR Ten-SCTE 3.0, Spektrum DX6R

WWW.CASPER-RC.COM TLR and Tekin setups
Casper is offline   Reply With Quote
Old 05-21-2009, 08:33 AM   #31450
Tech Master
 
EricF's Avatar
 
Join Date: Jun 2003
Location: AZ
Posts: 1,516
Default

Quote:
Originally Posted by CarlosG. View Post
All, I know is by August at the latest, we 12th scale racers down here In San Antonio will be up and running 13.5 and 1s LiPo for our stock class. Although by ROAR's definition it is not stock, but it will be close but not equivilant to 4 cell /17.5. We thought about 17.5/1s but for us here it would be to slow in the back straight-away.

Hey Yang, were are my tires????
Well why don't you just call it super stock as it's defined by ROAR why not call it what the class is, or do you think that may cause confussion to the masses?

I'm just asking... I'm not trying to insult you or get insulted, I think Chris and Yang have done that enough for the last couple of days
E
EricF is offline   Reply With Quote
Old 05-21-2009, 08:38 AM   #31451
Tech Master
 
EricF's Avatar
 
Join Date: Jun 2003
Location: AZ
Posts: 1,516
Default

Quote:
Originally Posted by chris moore View Post
:Hey get off the porch and start running 1/12 again
I'm working on it... I have a couple of lipo's on order, I still have some round cells but they may be a little iffy on the performance scale. I've been running 1/8 scale at HT. I think I'll be able to come up to SRS in a couple of weeks.

I've heard rummors that CH may pull the carpet and go to asphalt or myabe just start running the offroad wet to keeep the dust down. We'll see.
E
EricF is offline   Reply With Quote
Old 05-21-2009, 08:56 AM   #31452
Tech Adept
 
12thScaleCrazy's Avatar
 
Join Date: Aug 2003
Location: The Great White North
Posts: 106
Default

Quote:
Originally Posted by TrevCoult View Post
I've just put a short review of the CRC super soft sensor wire up on www.carsrcracing.co.uk.
Trev
I thought CRC used this companies wire.
http://www.tqracing.com/sensor.htm
12thScaleCrazy is offline   Reply With Quote
Old 05-21-2009, 08:57 AM   #31453
Tech Prophet
 
Casper's Avatar
 
Join Date: Aug 2004
Location: Orange, Ca
Posts: 17,275
Trader Rating: 33 (100%+)
Default

I just ran some numbers on those rollouts. Holly cow those are some big pinons. I was kind of expecting that but wow.

I am planning on running a CRC Gen X. What is the smallest spur you can get on one of these. Also anyone know what the total teeth you can put on the car is? (spur + pinion).

Thanks for the help guys!
__________________
TLR/Losi Team Driver
TLR/Losi | Tekin | Venom | DE Racing | Spektrum | Exotek | JBRL | Kolor Koncepts | OC/RC |Sticky Kicks | Imagine It Graphics | Casper-RC.com
TLR 22 3.0, TLR 22SCT 2.0, TLR 22-4 2.0, TLR Ten-SCTE 3.0, Spektrum DX6R

WWW.CASPER-RC.COM TLR and Tekin setups
Casper is offline   Reply With Quote
Old 05-21-2009, 09:11 AM   #31454
Tech Elite
 
theisgroup's Avatar
 
Join Date: Apr 2002
Posts: 3,191
Trader Rating: 10 (100%+)
Default

prs has 71
__________________
yang lai

Team Tamale | Team Tekin | RCAmerica | Speedmerchant | Speedzone RC | EA Motorsports | Ko Propo USA | eXpress Motorsports | Parma/PSE
theisgroup is offline   Reply With Quote
Old 05-21-2009, 09:12 AM   #31455
Tech Master
 
EricF's Avatar
 
Join Date: Jun 2003
Location: AZ
Posts: 1,516
Default

Quote:
Originally Posted by Casper View Post
I just ran some numbers on those rollouts. Holly cow those are some big pinons. I was kind of expecting that but wow.

I am planning on running a CRC Gen X. What is the smallest spur you can get on one of these. Also anyone know what the total teeth you can put on the car is? (spur + pinion).

Thanks for the help guys!
I think the smallest spur is a 74 or 76 depending on which brand you buy also the dia. of diff rings drive this. The spur / pinion size combo will depend on your car; which I can't comment on as I don't have a gen X.
E
EricF is offline   Reply With Quote
Reply

Similar Threads
Thread Thread Starter Forum Replies Last Post
New to the forum mig rod Electric Off-Road 1 01-05-2008 05:23 PM
hi i need help and im new to the forum racer4 Rookie Zone 4 01-21-2007 02:37 PM
Why is this forum listed under the On Road Forum? sport10 Onroad Nitro Engine Zone 0 01-11-2007 08:06 AM
Forum Changes... futureal Wisconsin & Illinois Racing 3 10-28-2002 09:26 PM



Currently Active Users Viewing This Thread: 3 (0 members and 3 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off



All times are GMT -7. It is currently 03:17 PM.


Powered By: vBulletin v3.9.2.1
Privacy Policy | Terms of Use | Advertise Content © 2001-2011 RCTech.net

SEO by vBSEO 3.5.0