R/C Tech Forums

Go Back   R/C Tech Forums > General Forums > Electric On-Road

    Hide Wikipost
Old 10-28-2016, 12:43 PM   -   Wikipost
R/C Tech Forums Thread Wiki: 1/12 forum
Please read: This is a community-maintained wiki post containing the most important information from this thread. You may edit the Wiki once you have been a member for 90 days and have made 90 posts.
 
Last edit by: fenton06
This is a place to share knowledge related to 1/12th scale racing. It is not to be used for conversations.

KITS:
Click links to go to manufacturer product page. If any are missing please add them!

TIRES:
Pre-mounted tires readily available in the US:
Pre-mounted tires readily available in the Europe:
  • Hot Race ??

Gluing your own donuts:
https://www.youtube.com/watch?v=hm7z1rz-74s - Special thanks to Edward Pickering!
Truing tires:
https://www.youtube.com/watch?v=8wqHOLWq6Uc - Special thanks to Edward Pickering!

The following information came from HERE, with some editing and information added. Thanks Christian!

THIS MAY NEED UPDATING FOR THE NEW BLACK CRC CARPET

Brands:
BSR, CRC, Jaco:
Pro One is no longer selling to the public, but it and the brands above are all mounted by BSR and use the same foam. The nomenclature of the BSR vs Jaco/CRC is a little different in a few instances but is otherwise the same. The BSR foam consists of three families, and can be identifed as synthetics, naturals, and blends.

Synthetics - The old school, light weight, easy to true "dry feeling" tires. These include tires like CRC/Jaco Yellow (BSR White), Black, Gray, etc. These tires offer the highest wear rate and lowest grip. Many racers continue to use these nder high bite conditions.

Naturals - These tires are usually the best alternative for low bite and asphalt. They include Pink, Magenta, Double Pink, Lilac (BSR Team Purple), Purple, and other tires. These tires provide a ton of grip, but tend to get sticky in high bite conditions. This rubber does not wear as easily, and the cars will pick up gunk and fibers from the carpet under most high bite conditions. This is especially bad if the humidity is high.

Blends - These are the tires most people run today. They were initially called "JFT foam" by some, as it was believed that the tires were the same as the JFT tires. We can divide the blends further into two groups: high rubber and low rubber content. The high rubber would be the new rear Orange and Red from the BSR family, and the low rubber would be the Green and Blue varieties. When, asked about the difference, John Foister from BSR Tires said they came from the same "family" of foam, but they offered different grip. According to John, the Green/Blue has more bite than Orange/Red, but from track testing Oranges offer more bite than Green (being equivalent to in hardness) when the grip is high and absolutely no grip when it is lower. The Orange foam has a denser pore structure and the tire is not as prone to chunking. It is also important to note is that BSR Blue rears are not the same as the BSR Blue fronts!

JFT:
JFT stands for Japan Foam Tire. They started the new wave of foam tires we are all using now (Blue/Blu, Green/Greene, Dbl Blue, etc). These tires are a little different than the BSR tire family, but work in very similar conditions. They offers four varieties A (asphalt), C (carpet), S (???), and R (???). This does not mean that those types only work on that surface, but this is what they recommend.

JFT uses the same foam for fronts and rears if the color is the same.

A: Used on asphalt, considered close to the natural rubber variety and are named consistently with other natural tires.
C: Used on carpet, considered a blend.
S: Used on carpet?, tires are ???
R: Used on carpet?, tires are ???

For setup, the JFT foam seem to generate more bite than the BSR, therefore the car tends to be a little more aggressive.

Ulti:
Ulti is another Japanese brand that offers an array of compounds. They have their own way of rating tires, and are difficult to equate to other brands. They have 4 different varieties, each in varying degrees of hardness.

J: High rubber content tire, similar to Pink/ Magenta. Soft would be close to a pink. These offer the most bite and are great for asphalt/carpet front tire. (J hard being very popular)
X: "Balanced" blend, similar to JFT Blue/ Green. Soft is equivalent to Green, medium to Blue in hardness. Great for carpet!
Y: High synthetic blend with lower grip, and is not a very popular variety.
Z: A very expensive "special" foam that is supposed to be magic on asphalt. Only make it in soft shore.
European tires:
There are many great European foam tire brands that use their own types of foam, as well as traditional foams. SOmeone with more knowledge about them will need to fill this in!

Tire Diameter:
If you are racing on carpet, you have to evaluate how much grip your track has. If your track is low to medium grip, you can run bigger tires. If you are on higher bite you have to cut them smaller, there is simply no way around it. Bigger tires are needed for asphalt, especially in the rear. The larger tires provide much needed lateral bite.

Carpet (mm):
Low - Medium Bite
Front: 42.0 - 42.5
Rear: 42.5 - 43.00
Medium - High Bite
Front: 40.5 - 41.0
Rear: 41.5 - 42.0
Big Race
Front: 39.5 - 40.0
Rear: 40.5 - 41.0
Asphalt (mm):
Parking Lot
Front: 43.0 - 44.0
Rear: 44.0 - 45.0
Prepped High Bite
Front: 42.0 - 43.0
Rear: 43.0 - 44.0

Tire Saucing:
Most facilities have moved towards odorless traction additives such as SXT. Some of additives evaporate very quickly and some do not. This seems to be something that is also dependent on tire compound and ambient temperature. For example, saucing a Green compound seems like it never dries, especially when tjhe temperature is lower. We have found that wiping the tires off 15 minutes before we go run allows the sauce to cure, which makes the car come in much quicker with Green rears. Blue compounds on the other hand, do fine when wiped off right before hitting the track.

Saucing half front and full rear is a good initial starting point. If the front of the car is too agressive you can sauce les than half, or for a shorter amount of time.
Tire Fuzzing:
In conditions of increasing grip, foam tires will somewtimes get sticky and pick up fuzz and debris from the track. This is highly dependent on the rubber sedan tire that is being run at your local track and the compound/ type of foam you are running on you car. The softer the sedan tire and the harder/higher rubber content in your foam tire, trouble with fuzzing seems more likely to occur.

There are ways to get around fuzzing under most conditions, and usually involves the selection of the correct foam compound. The more fuzz you get, the softer/lower rubber content you want to run.

Examples:
Problem: Car fuzzes with Lilac/Team Purple fronts and car starts pushing.
Solution: Use a softer front tire and or different family of foam. Replace it with Blue or Double Blue front.

Problem: Car loses rear bite 6 minutes into the run. Blue rear tires look almost clean but have small carpet hairs.
Solution: Use Green rear tires. The softer compound wears instead of getting sticky, minimizing fuzz.

Tire Selection:
Starting out, pick 2 tire compounds for the front and rear. The following should have you covered 99% of the time.

Front - Green and Blue (BSR) or Green and Light Blue (JFT)
Rear - Blue and Double Blue (BSR) or Blue and Dark Blue (JFT)

You may wonder about other compounds out there and if they might be better, trust me, they probably won't be. Even if there are other tires that can be as fast, the synthetic family wears out really fast and the high natural rubber will probably fuzz on you over an 8 minute run. The blends family seems to be the most versatile foam type available today. They last awhile, and sticking to them will make your process of tire selection simpler.
Tire Charts:
BSR/CRC/Jaco



Contact



Corally



JFT (Japan Foam Tire)



Ulti



Enneti (Xceed)



ELECTRONICS:
ESC:
As of now, ROAR is staying 1S (3.7V nominal; 4.2V fully charged) for 1/12. There are many 1S ESC's with a built in BEC so nothing else is required to power the receiver and servo.

If you don't want to lock yourself into a 1S specific ESC, you do have other options! It is possible to use your 2S ESC without a booster or receiver pack, and the ESC simply supplies the lower voltage. If that does not appeal to you, you will need to use an Rx pack or booster. The Rx pack and booster will both supply the receiver with a higher voltage than the 1S pack.

If you decide to use an Rx pack, MAKE SURE TO REMOVE THE RED WIRE FROM THE ESC PLUG THAT GOES INTO THE RECEIVER!!!

If you choose to use a voltage booster, it works exactly how it sounds. Instead of plugging the ESC into the receiver, it plugs into the booster, and the booster plug goes to the ESC, supplying the higher voltage.

1S ESC:
If there are any missing please add them!!

If anyone would like a need for a chart comparing the ESC's specs PM fenton06 and I'll get one made and put in here!
Voltage Boosters:
If there are any missing please add them!
Servos:
BODIES:
Black Art (CRC - US Dist):
  • Audi R8C - BA002 - .020 Thick



  • Black Market (Mohawk 12) - BA005 - .020



  • Lola B10 - BA006 - .020 thick
  • Toyota TS030 - BA008 - .020 thick

    Lola - black/red, TS030 - green/pink


PROTOForm:

Reflex Racing/RSD:

SUSPENSION ADJUSTMENTS:

Print Wikipost

Reply
 
Thread Tools Search this Thread
Old 11-20-2008, 07:29 AM   #29731
Tech Apprentice
 
Join Date: Apr 2005
Location: Helsinki, Finland
Posts: 83
Default

@ nash

try Mark Payne's blog here
http://www.markpayneblog.blogspot.com/
jarkko is offline   Reply With Quote
Old 11-20-2008, 07:37 AM   #29732
Tech Elite
 
nashrcracer's Avatar
R/C Tech Charter Subscriber
 
Join Date: Nov 2001
Location: LA - Lower Antioch
Posts: 4,849
Trader Rating: 1 (100%+)
Default

haven't put it together yet but I am still waiting on the car. but I figured I would get a head start on what areas in the molding that need extra sanding what can be cut. and the normal stuff. I'll check out Mark's page and see. got to build 2 cars this weekend... weeeeee...
__________________
RC50 As you come into this world, something else is also born. You begin your life, and it begins a journey towards you. It moves slowly, but it never stops. Wherever you go, whatever path you take, it will follow never faster, never slower, always coming. You will run, it will walk. You will rest, it will not. One day, you will linger in the same place too long you will sit too still, or sleep too deep. And when, too late, you rise to go, you will notice a second shadow next to yours. Your life will then be over.
nashrcracer is offline   Reply With Quote
Old 11-20-2008, 08:51 AM   #29733
Tech Master
 
Join Date: Nov 2006
Location: New Bern, N.C.
Posts: 1,179
Trader Rating: 3 (100%+)
Default instructions

except for maybe looking a the pictures, real men don't use instructions.......either for RC cars or for anything else in life. It's a guy thing. We don't ask for driving directions either.
vafactor is offline   Reply With Quote
Old 11-20-2008, 09:34 AM   #29734
Tech Addict
 
mtbboy's Avatar
 
Join Date: Sep 2005
Location: Winnipeg. Igloo. Hockey. Beer.
Posts: 715
Trader Rating: 1 (100%+)
Default

I think this applies as well Nash.

http://www.swiftracingproducts.com/Page.cfm?InfoID=5192

Dave.
__________________
Team Associated Reedy factory team driver.
B5M Factory lite $ B44.3 Factory $ TC6.2 $ RC12R 5.1
Reedy 410 Speedos $ Reedy Mach Series motors
204 Raceway Winnipeg 1/10-1/8 Offroad. Owner.
mtbboy is offline   Reply With Quote
Old 11-20-2008, 09:43 AM   #29735
Tech Elite
 
nashrcracer's Avatar
R/C Tech Charter Subscriber
 
Join Date: Nov 2001
Location: LA - Lower Antioch
Posts: 4,849
Trader Rating: 1 (100%+)
Default

I was the guy looking over others peoples shoulders cheating in class. Life is hard take all the advantages you can get... And I don't ask for directions either I just use google maps on my phone. and thanks I'll look at that also...
__________________
RC50 As you come into this world, something else is also born. You begin your life, and it begins a journey towards you. It moves slowly, but it never stops. Wherever you go, whatever path you take, it will follow never faster, never slower, always coming. You will run, it will walk. You will rest, it will not. One day, you will linger in the same place too long you will sit too still, or sleep too deep. And when, too late, you rise to go, you will notice a second shadow next to yours. Your life will then be over.
nashrcracer is offline   Reply With Quote
Old 11-20-2008, 10:38 AM   #29736
Tech Master
 
gijoe64's Avatar
 
Join Date: Apr 2003
Location: Corona, Ca
Posts: 1,407
Trader Rating: 25 (100%+)
Default

Hey guys can I get some help with gearing a 17.5 motor, I will be at the Snowbirds and I am alittle confused about Pinion and spur with these motors.
What type of rollout are you looking for on a small track and on a large track like at the Birds.

Thanks
__________________
Raymon Robinson

ARC, LRP Go Blue!!
gijoe64 is offline   Reply With Quote
Old 11-20-2008, 11:05 AM   #29737
Tech Elite
 
odpurple's Avatar
 
Join Date: Dec 2002
Location: San Francisco
Posts: 2,187
Default

It depends somewhat on the brand of motor. We run between 85mm and 95mm depending on that and the track size
__________________
TOP Racing USA--OD Racing--Novak--Power Push--J Spec
odpurple is offline   Reply With Quote
Old 11-20-2008, 12:10 PM   #29738
Tech Master
 
gijoe64's Avatar
 
Join Date: Apr 2003
Location: Corona, Ca
Posts: 1,407
Trader Rating: 25 (100%+)
Default

Quote:
Originally Posted by odpurple View Post
It depends somewhat on the brand of motor. We run between 85mm and 95mm depending on that and the track size
I use Trinity and Orion motors.
__________________
Raymon Robinson

ARC, LRP Go Blue!!
gijoe64 is offline   Reply With Quote
Old 11-20-2008, 12:47 PM   #29739
Tech Elite
 
PutAwayWet's Avatar
 
Join Date: Apr 2007
Location: Seattle, WA
Posts: 2,296
Trader Rating: 1 (100%+)
Default

Quote:
Originally Posted by gijoe64 View Post
I use Trinity and Orion motors.
Regardless of the brand, it's in the neighborhood of 90mm +/- 5mm. Adjust for temp and rip based on the track.
PutAwayWet is offline   Reply With Quote
Old 11-20-2008, 01:12 PM   #29740
Tech Master
 
gijoe64's Avatar
 
Join Date: Apr 2003
Location: Corona, Ca
Posts: 1,407
Trader Rating: 25 (100%+)
Default

Quote:
Originally Posted by PutAwayWet View Post
Regardless of the brand, it's in the neighborhood of 90mm +/- 5mm. Adjust for temp and rip based on the track.
On the average what size pinion and spur will I use? And thanks guys for the help.
__________________
Raymon Robinson

ARC, LRP Go Blue!!
gijoe64 is offline   Reply With Quote
Old 11-20-2008, 01:48 PM   #29741
Tech Rookie
 
Join Date: Nov 2008
Posts: 19
Default help needed R5 roll out

Hi hope someone can help im not new to RC but fairly new to the world of brushless, can anyone give me an idea of mill per rev on a 10.5 novak brushless system with sintered rotor. The instruction say gear it to reach approx 160f...last night at club meeting i was running a whoping 61mm per rev which seems crazy high having run brushed motors at around 52mm...and it was still only reaching 128f should I be going even higher as im going to need a smaller spur on my R5 to fit the bigger pinion on!
Help please?
fludey is offline   Reply With Quote
Old 11-20-2008, 02:44 PM   #29742
Tech Elite
 
chris moore's Avatar
 
Join Date: Mar 2004
Location: Phx AZ
Posts: 3,663
Trader Rating: 85 (99%+)
Default

Quote:
Originally Posted by gijoe64 View Post
On the average what size pinion and spur will I use? And thanks guys for the help.

I like a 76 spur, 50 pinion to start and adjust from that depending on your tire size.
__________________
Sponsered by:

CMDezigns Paint Works
https://www.facebook.com/pages/CM-Dezigns/259989190822177?ref=hl
chris moore is offline   Reply With Quote
Old 11-21-2008, 01:07 PM   #29743
Tech Adept
 
Join Date: Jan 2008
Posts: 143
Trader Rating: 9 (100%+)
Default

Does any one know if a brushless motor like the Novak 10.5 or 13.5 will fit into a CALANDRA 3.2r?

Last edited by BIGBOT; 11-21-2008 at 01:37 PM.
BIGBOT is offline   Reply With Quote
Old 11-21-2008, 01:40 PM   #29744
Tech Addict
 
Join Date: Mar 2008
Posts: 649
Trader Rating: 1 (100%+)
Default

Quote:
Originally Posted by fludey View Post
Hi hope someone can help im not new to RC but fairly new to the world of brushless, can anyone give me an idea of mill per rev on a 10.5 novak brushless system with sintered rotor. The instruction say gear it to reach approx 160f...last night at club meeting i was running a whoping 61mm per rev which seems crazy high having run brushed motors at around 52mm...and it was still only reaching 128f should I be going even higher as im going to need a smaller spur on my R5 to fit the bigger pinion on!
Help please?
It's been a long time since I ran 10.5 but I do remember that I was running an 88 spur to get the rollout I needed. You just have to keep gearing it up until the laptimes start to fall off or the motor gets too hot.
Fred_B is offline   Reply With Quote
Old 11-21-2008, 02:41 PM   #29745
Tech Master
 
WIITA's Avatar
 
Join Date: Jun 2008
Posts: 1,551
Trader Rating: 41 (100%+)
Default

I gear around a 76 or 78 spur and a 46-48 pinion. 78 robinson is way easier to find right now. 76 prs gears are great to have but are hard to find in my opinion. I am racing on a large carpet track with med to high grip and 76/50 would be to much for me and I am using the Fantom brushless which is the same as the trinity duo motors. We are rolling out around 80-85 and keeping up just fine with the 19t brushed motors. Hope this helps.
WIITA is offline   Reply With Quote
Reply

Similar Threads
Thread Thread Starter Forum Replies Last Post
New to the forum mig rod Electric Off-Road 1 01-05-2008 05:23 PM
hi i need help and im new to the forum racer4 Rookie Zone 4 01-21-2007 02:37 PM
Why is this forum listed under the On Road Forum? sport10 Onroad Nitro Engine Zone 0 01-11-2007 08:06 AM
Forum Changes... futureal Wisconsin & Illinois Racing 3 10-28-2002 09:26 PM



Currently Active Users Viewing This Thread: 4 (0 members and 4 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off



All times are GMT -7. It is currently 09:33 AM.


Powered By: vBulletin v3.9.2.1
Privacy Policy | Terms of Use | Advertise Content © 2001-2011 RCTech.net

SEO by vBSEO 3.5.0