R/C Tech Forums

Go Back   R/C Tech Forums > General Forums > Electric On-Road

    Hide Wikipost
Old 10-28-2016, 12:43 PM   -   Wikipost
R/C Tech Forums Thread Wiki: 1/12 forum
Please read: This is a community-maintained wiki post containing the most important information from this thread. You may edit the Wiki once you have been a member for 90 days and have made 90 posts.
 
Last edit by: fenton06
This is a place to share knowledge related to 1/12th scale racing. It is not to be used for conversations.

KITS:
Click links to go to manufacturer product page. If any are missing please add them!

TIRES:
Pre-mounted tires readily available in the US:
Pre-mounted tires readily available in the Europe:
  • Hot Race ??

Gluing your own donuts:
https://www.youtube.com/watch?v=hm7z1rz-74s - Special thanks to Edward Pickering!
Truing tires:
https://www.youtube.com/watch?v=8wqHOLWq6Uc - Special thanks to Edward Pickering!

The following information came from HERE, with some editing and information added. Thanks Christian!

THIS MAY NEED UPDATING FOR THE NEW BLACK CRC CARPET

Brands:
BSR, CRC, Jaco:
Pro One is no longer selling to the public, but it and the brands above are all mounted by BSR and use the same foam. The nomenclature of the BSR vs Jaco/CRC is a little different in a few instances but is otherwise the same. The BSR foam consists of three families, and can be identifed as synthetics, naturals, and blends.

Synthetics - The old school, light weight, easy to true "dry feeling" tires. These include tires like CRC/Jaco Yellow (BSR White), Black, Gray, etc. These tires offer the highest wear rate and lowest grip. Many racers continue to use these nder high bite conditions.

Naturals - These tires are usually the best alternative for low bite and asphalt. They include Pink, Magenta, Double Pink, Lilac (BSR Team Purple), Purple, and other tires. These tires provide a ton of grip, but tend to get sticky in high bite conditions. This rubber does not wear as easily, and the cars will pick up gunk and fibers from the carpet under most high bite conditions. This is especially bad if the humidity is high.

Blends - These are the tires most people run today. They were initially called "JFT foam" by some, as it was believed that the tires were the same as the JFT tires. We can divide the blends further into two groups: high rubber and low rubber content. The high rubber would be the new rear Orange and Red from the BSR family, and the low rubber would be the Green and Blue varieties. When, asked about the difference, John Foister from BSR Tires said they came from the same "family" of foam, but they offered different grip. According to John, the Green/Blue has more bite than Orange/Red, but from track testing Oranges offer more bite than Green (being equivalent to in hardness) when the grip is high and absolutely no grip when it is lower. The Orange foam has a denser pore structure and the tire is not as prone to chunking. It is also important to note is that BSR Blue rears are not the same as the BSR Blue fronts!

JFT:
JFT stands for Japan Foam Tire. They started the new wave of foam tires we are all using now (Blue/Blu, Green/Greene, Dbl Blue, etc). These tires are a little different than the BSR tire family, but work in very similar conditions. They offers four varieties A (asphalt), C (carpet), S (???), and R (???). This does not mean that those types only work on that surface, but this is what they recommend.

JFT uses the same foam for fronts and rears if the color is the same.

A: Used on asphalt, considered close to the natural rubber variety and are named consistently with other natural tires.
C: Used on carpet, considered a blend.
S: Used on carpet?, tires are ???
R: Used on carpet?, tires are ???

For setup, the JFT foam seem to generate more bite than the BSR, therefore the car tends to be a little more aggressive.

Ulti:
Ulti is another Japanese brand that offers an array of compounds. They have their own way of rating tires, and are difficult to equate to other brands. They have 4 different varieties, each in varying degrees of hardness.

J: High rubber content tire, similar to Pink/ Magenta. Soft would be close to a pink. These offer the most bite and are great for asphalt/carpet front tire. (J hard being very popular)
X: "Balanced" blend, similar to JFT Blue/ Green. Soft is equivalent to Green, medium to Blue in hardness. Great for carpet!
Y: High synthetic blend with lower grip, and is not a very popular variety.
Z: A very expensive "special" foam that is supposed to be magic on asphalt. Only make it in soft shore.
European tires:
There are many great European foam tire brands that use their own types of foam, as well as traditional foams. SOmeone with more knowledge about them will need to fill this in!

Tire Diameter:
If you are racing on carpet, you have to evaluate how much grip your track has. If your track is low to medium grip, you can run bigger tires. If you are on higher bite you have to cut them smaller, there is simply no way around it. Bigger tires are needed for asphalt, especially in the rear. The larger tires provide much needed lateral bite.

Carpet (mm):
Low - Medium Bite
Front: 42.0 - 42.5
Rear: 42.5 - 43.00
Medium - High Bite
Front: 40.5 - 41.0
Rear: 41.5 - 42.0
Big Race
Front: 39.5 - 40.0
Rear: 40.5 - 41.0
Asphalt (mm):
Parking Lot
Front: 43.0 - 44.0
Rear: 44.0 - 45.0
Prepped High Bite
Front: 42.0 - 43.0
Rear: 43.0 - 44.0

Tire Saucing:
Most facilities have moved towards odorless traction additives such as SXT. Some of additives evaporate very quickly and some do not. This seems to be something that is also dependent on tire compound and ambient temperature. For example, saucing a Green compound seems like it never dries, especially when tjhe temperature is lower. We have found that wiping the tires off 15 minutes before we go run allows the sauce to cure, which makes the car come in much quicker with Green rears. Blue compounds on the other hand, do fine when wiped off right before hitting the track.

Saucing half front and full rear is a good initial starting point. If the front of the car is too agressive you can sauce les than half, or for a shorter amount of time.
Tire Fuzzing:
In conditions of increasing grip, foam tires will somewtimes get sticky and pick up fuzz and debris from the track. This is highly dependent on the rubber sedan tire that is being run at your local track and the compound/ type of foam you are running on you car. The softer the sedan tire and the harder/higher rubber content in your foam tire, trouble with fuzzing seems more likely to occur.

There are ways to get around fuzzing under most conditions, and usually involves the selection of the correct foam compound. The more fuzz you get, the softer/lower rubber content you want to run.

Examples:
Problem: Car fuzzes with Lilac/Team Purple fronts and car starts pushing.
Solution: Use a softer front tire and or different family of foam. Replace it with Blue or Double Blue front.

Problem: Car loses rear bite 6 minutes into the run. Blue rear tires look almost clean but have small carpet hairs.
Solution: Use Green rear tires. The softer compound wears instead of getting sticky, minimizing fuzz.

Tire Selection:
Starting out, pick 2 tire compounds for the front and rear. The following should have you covered 99% of the time.

Front - Green and Blue (BSR) or Green and Light Blue (JFT)
Rear - Blue and Double Blue (BSR) or Blue and Dark Blue (JFT)

You may wonder about other compounds out there and if they might be better, trust me, they probably won't be. Even if there are other tires that can be as fast, the synthetic family wears out really fast and the high natural rubber will probably fuzz on you over an 8 minute run. The blends family seems to be the most versatile foam type available today. They last awhile, and sticking to them will make your process of tire selection simpler.
Tire Charts:
BSR/CRC/Jaco



Contact



Corally



JFT (Japan Foam Tire)



Ulti



Enneti (Xceed)



ELECTRONICS:
ESC:
As of now, ROAR is staying 1S (3.7V nominal; 4.2V fully charged) for 1/12. There are many 1S ESC's with a built in BEC so nothing else is required to power the receiver and servo.

If you don't want to lock yourself into a 1S specific ESC, you do have other options! It is possible to use your 2S ESC without a booster or receiver pack, and the ESC simply supplies the lower voltage. If that does not appeal to you, you will need to use an Rx pack or booster. The Rx pack and booster will both supply the receiver with a higher voltage than the 1S pack.

If you decide to use an Rx pack, MAKE SURE TO REMOVE THE RED WIRE FROM THE ESC PLUG THAT GOES INTO THE RECEIVER!!!

If you choose to use a voltage booster, it works exactly how it sounds. Instead of plugging the ESC into the receiver, it plugs into the booster, and the booster plug goes to the ESC, supplying the higher voltage.

1S ESC:
If there are any missing please add them!!

If anyone would like a need for a chart comparing the ESC's specs PM fenton06 and I'll get one made and put in here!
Voltage Boosters:
If there are any missing please add them!
Servos:
BODIES:
Black Art (CRC - US Dist):
  • Audi R8C - BA002 - .020 Thick



  • Black Market (Mohawk 12) - BA005 - .020



  • Lola B10 - BA006 - .020 thick
  • Toyota TS030 - BA008 - .020 thick

    Lola - black/red, TS030 - green/pink


PROTOForm:

Reflex Racing/RSD:

SUSPENSION ADJUSTMENTS:

Print Wikipost

Reply
 
Thread Tools Search this Thread
Old 02-03-2008, 05:51 PM   #28126
Tech Adept
 
Join Date: May 2005
Posts: 241
Default

Quote:
Quick question: How does rear width affect handling?
Increasing rear width will decrease rear cornering traction. Most racers use near maximum rear width (172 mm under ROAR rules) and tune the rest of the car to their liking.
Larry Brown is offline   Reply With Quote
Old 02-03-2008, 06:46 PM   #28127
Tech Addict
 
Join Date: Jun 2005
Location: Halifax, Nova Scotia, Canada
Posts: 708
Trader Rating: 2 (100%+)
Default

Thanks Larry!
adam lancia is offline   Reply With Quote
Old 02-04-2008, 02:50 PM   #28128
Tech Initiate
 
Join Date: Nov 2006
Location: Coca-cola land
Posts: 30
Default

Hi, guys. Which shop(prefer online shop) sell Kimbrough 64dp spur gear 92-94T, or any 92-94T spur gear with 12 outer diff ball holes. Thx.
B-day is offline   Reply With Quote
Old 02-04-2008, 03:25 PM   #28129
Tech Apprentice
 
Join Date: Oct 2007
Posts: 62
Default

For Sale
A CRC Gen-X I only ran this car this week at the Snowbirds. The chassis has been sanded and sealed by Mike Odonnell, and has no scratches marks or chips on it. The car will come with a Novak GTX speedo, a JR3550 servo and a Spektrum Micro Receiver. The car was also wired by Mike and looks awesome. The car will come with two Cobalt 27t motors only cut once and two Promatch IB4200 cells. The car has the new Open X rear pod on it and the new longer front pivot balls on it, along with a Slapmaster front bumper and thrust bearing. The car will come with a new set of high roller tires and I new painted body, along with some spare parts. I am asking $315 shipped anywhere in the US and I will only accept paypal. If you have any question or would like some pics of the car Email me at Jon@vgsportsinc.com
IMTK422 is offline   Reply With Quote
Old 02-04-2008, 03:39 PM   #28130
Tech Adept
 
Join Date: May 2005
Posts: 241
Default

Quote:
Hi, guys. Which shop(prefer online shop) sell Kimbrough 64dp spur gear 92-94T, or any 92-94T spur gear with 12 outer diff ball holes. Thx.
B-day: try www.superiorhobbies.com look under electric motors, then accessories
Larry Brown is offline   Reply With Quote
Old 02-04-2008, 04:01 PM   #28131
Tech Addict
 
Ferrarimk13's Avatar
 
Join Date: Jan 2008
Location: Staten Island, New York
Posts: 630
Send a message via AIM to Ferrarimk13
Default

damn IMTK, why didnt you sell it earlier, i would have bought it, lol. are you sure you didnt mean $1315? man, the person who buys it is gonna be one lucky mother.
__________________
Press Alt+F4 for a good time.
Ferrarimk13 is offline   Reply With Quote
Old 02-05-2008, 05:47 AM   #28132
Tech Initiate
 
Join Date: Nov 2006
Location: Coca-cola land
Posts: 30
Default

Quote:
Originally Posted by Larry Brown View Post
B-day: try www.superiorhobbies.com look under electric motors, then accessories
Big thanks, bro.
B-day is offline   Reply With Quote
Old 02-05-2008, 12:02 PM   #28133
Tech Master
 
Join Date: Jan 2007
Posts: 1,036
Trader Rating: 10 (100%+)
Default

Quote:
Originally Posted by IMTK422 View Post
For Sale
A CRC Gen-X I only ran this car this week at the Snowbirds. The chassis has been sanded and sealed by Mike Odonnell, and has no scratches marks or chips on it. The car will come with a Novak GTX speedo, a JR3550 servo and a Spektrum Micro Receiver. The car was also wired by Mike and looks awesome. The car will come with two Cobalt 27t motors only cut once and two Promatch IB4200 cells. The car has the new Open X rear pod on it and the new longer front pivot balls on it, along with a Slapmaster front bumper and thrust bearing. The car will come with a new set of high roller tires and I new painted body, along with some spare parts. I am asking $315 shipped anywhere in the US and I will only accept paypal. If you have any question or would like some pics of the car Email me at Jon@vgsportsinc.com
dam jon, you really cant wait to get back to off-road can you! dont worry bro only 12 more days till we leave for the nitro challenge
__________________
Leon McIntosh
PRO-LINE--XRAY--RCAmerica--FX Engines--NitroPro Fuel--Kustom R/C Graphics--Schelle Racing

******* DialedSetups.com ****** Check it out!!!!!
punkracer24 is offline   Reply With Quote
Old 02-06-2008, 03:20 AM   #28134
Tech Master
 
Canyon's Avatar
 
Join Date: Oct 2005
Posts: 1,152
Trader Rating: 8 (91%+)
Default

What kind of rollout are you guys using for brushless 10.5 and 13.5?
Canyon is offline   Reply With Quote
Old 02-06-2008, 10:34 AM   #28135
Tech Apprentice
 
Join Date: May 2007
Location: Antwerp, Belgium
Posts: 50
Default

Quote:
Originally Posted by spdtch View Post
What kind of rollout are you guys using for brushless 10.5 and 13.5?
Depends on the track basically... for a technical indoor track 43mm would be fine.
potloodslijper is offline   Reply With Quote
Old 02-06-2008, 12:50 PM   #28136
Tech Apprentice
 
Join Date: Oct 2007
Posts: 62
Default

CRC HIGH ROLLER TIRES FOR SALE
Front pairs
Magenta- New
Magenta- Cut to 1.70 used
Purple- cut to 1.70 new
Black- cut to 1.70 new

Rear Pairs
Grey- cut to 1.74 new
Grey- cut to 1.77 used
White- new
Magenta- new
Pink- cut to 1.74 used
Grey- cut to 1.77 new
Pink- cut to 1.77 new
White- cut to 1.77 new
All of these tire are in great shape. None of the used tire have been chunked, and most only have one 8min run on them. I am asking 60.00 Paypal for all of them shipped anywhere in the US. If you have any questions or would like to see pics Email me at Jon@vgsportsinc.com
IMTK422 is offline   Reply With Quote
Old 02-06-2008, 01:02 PM   #28137
Tech Master
 
Canyon's Avatar
 
Join Date: Oct 2005
Posts: 1,152
Trader Rating: 8 (91%+)
Default

Quote:
Originally Posted by potloodslijper View Post
Depends on the track basically... for a technical indoor track 43mm would be fine.
Well is that for 10.5 or 13.5?
Canyon is offline   Reply With Quote
Old 02-06-2008, 01:58 PM   #28138
Tech Apprentice
 
Join Date: Oct 2007
Posts: 62
Default

CRC GEN-X FOR SALE
This car has only one race on it. The car has a open-X rear end, the long pillow balls, Ti. turnbuckles,Ti Front screws, ceramic bearings, Slapmaster bumper and thrust bearing, and ceramic balls. The chassis is sanded and sealed by Mike Odonnell. This car is awesome, it only has the snowbirds on it. The chassis is perfect. I am asking $200 for this car. I only accept Paypal and will only ship in the lower 48 states. If you have any question, or would like to see pics email me at Jon@vgsportsinc.com
IMTK422 is offline   Reply With Quote
Old 02-06-2008, 02:10 PM   #28139
Tech Master
 
CREWMAN's Avatar
 
Join Date: Aug 2007
Posts: 1,539
Trader Rating: 19 (100%+)
Default

This may seem dumb but i get annoyed ( mainly at myself) when i buy a car and its good that day but the next day the company comes out with somthing new. I don't know why i guess i have a thing for the latest and greatest. My question is is the CRC Gen-x or the BMI 1/12 scale going to be soon replace with newer stuff. I realize the both cars are awesome and both would be a dream to have But For example if the Gen x 2 comes out in a month I can wait.
__________________
D&K HOBBIES!!!!
Losi 8ight-T 2.0 Race Roller/Losi 350/JR 9100 Servos/Spektrum DX3R
BMI Copperhead 12/Thunder Power Lipo/Futaba Servo/Express 17.5/Spektrum DX3R
CREWMAN is offline   Reply With Quote
Old 02-06-2008, 05:34 PM   #28140
Tech Fanatic
 
Cosmo's Avatar
 
Join Date: Aug 2001
Location: Roanoke, VA
Posts: 829
Trader Rating: 5 (100%+)
Default Car for outdoor?

Can someone suggest a good car for outdoor (asphalt) racing? I raced 1/12 a LONG time ago, but have been out of RC for a while, and raced touring cars pretty much exclusively since then. I'm looking for a good car for running on asphalt on a pretty tight track.
Cosmo is offline   Reply With Quote
Reply

Similar Threads
Thread Thread Starter Forum Replies Last Post
New to the forum mig rod Electric Off-Road 1 01-05-2008 05:23 PM
hi i need help and im new to the forum racer4 Rookie Zone 4 01-21-2007 02:37 PM
Why is this forum listed under the On Road Forum? sport10 Onroad Nitro Engine Zone 0 01-11-2007 08:06 AM
Forum Changes... futureal Wisconsin & Illinois Racing 3 10-28-2002 09:26 PM



Currently Active Users Viewing This Thread: 2 (0 members and 2 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off



All times are GMT -7. It is currently 11:21 AM.


Powered By: vBulletin v3.9.2.1
Privacy Policy | Terms of Use | Advertise Content © 2001-2011 RCTech.net

SEO by vBSEO 3.5.0