R/C Tech Forums

Go Back   R/C Tech Forums > General Forums > Electric On-Road

    Hide Wikipost
Old 10-28-2016, 12:43 PM   -   Wikipost
R/C Tech Forums Thread Wiki: 1/12 forum
Please read: This is a community-maintained wiki post containing the most important information from this thread. You may edit the Wiki once you have been a member for 90 days and have made 90 posts.
 
Last edit by: fenton06
This is a place to share knowledge related to 1/12th scale racing. It is not to be used for conversations.

KITS:
Click links to go to manufacturer product page. If any are missing please add them!

TIRES:
Pre-mounted tires readily available in the US:
Pre-mounted tires readily available in the Europe:
  • Hot Race ??

Gluing your own donuts:
https://www.youtube.com/watch?v=hm7z1rz-74s - Special thanks to Edward Pickering!
Truing tires:
https://www.youtube.com/watch?v=8wqHOLWq6Uc - Special thanks to Edward Pickering!

The following information came from HERE, with some editing and information added. Thanks Christian!

THIS MAY NEED UPDATING FOR THE NEW BLACK CRC CARPET

Brands:
BSR, CRC, Jaco:
Pro One is no longer selling to the public, but it and the brands above are all mounted by BSR and use the same foam. The nomenclature of the BSR vs Jaco/CRC is a little different in a few instances but is otherwise the same. The BSR foam consists of three families, and can be identifed as synthetics, naturals, and blends.

Synthetics - The old school, light weight, easy to true "dry feeling" tires. These include tires like CRC/Jaco Yellow (BSR White), Black, Gray, etc. These tires offer the highest wear rate and lowest grip. Many racers continue to use these nder high bite conditions.

Naturals - These tires are usually the best alternative for low bite and asphalt. They include Pink, Magenta, Double Pink, Lilac (BSR Team Purple), Purple, and other tires. These tires provide a ton of grip, but tend to get sticky in high bite conditions. This rubber does not wear as easily, and the cars will pick up gunk and fibers from the carpet under most high bite conditions. This is especially bad if the humidity is high.

Blends - These are the tires most people run today. They were initially called "JFT foam" by some, as it was believed that the tires were the same as the JFT tires. We can divide the blends further into two groups: high rubber and low rubber content. The high rubber would be the new rear Orange and Red from the BSR family, and the low rubber would be the Green and Blue varieties. When, asked about the difference, John Foister from BSR Tires said they came from the same "family" of foam, but they offered different grip. According to John, the Green/Blue has more bite than Orange/Red, but from track testing Oranges offer more bite than Green (being equivalent to in hardness) when the grip is high and absolutely no grip when it is lower. The Orange foam has a denser pore structure and the tire is not as prone to chunking. It is also important to note is that BSR Blue rears are not the same as the BSR Blue fronts!

JFT:
JFT stands for Japan Foam Tire. They started the new wave of foam tires we are all using now (Blue/Blu, Green/Greene, Dbl Blue, etc). These tires are a little different than the BSR tire family, but work in very similar conditions. They offers four varieties A (asphalt), C (carpet), S (???), and R (???). This does not mean that those types only work on that surface, but this is what they recommend.

JFT uses the same foam for fronts and rears if the color is the same.

A: Used on asphalt, considered close to the natural rubber variety and are named consistently with other natural tires.
C: Used on carpet, considered a blend.
S: Used on carpet?, tires are ???
R: Used on carpet?, tires are ???

For setup, the JFT foam seem to generate more bite than the BSR, therefore the car tends to be a little more aggressive.

Ulti:
Ulti is another Japanese brand that offers an array of compounds. They have their own way of rating tires, and are difficult to equate to other brands. They have 4 different varieties, each in varying degrees of hardness.

J: High rubber content tire, similar to Pink/ Magenta. Soft would be close to a pink. These offer the most bite and are great for asphalt/carpet front tire. (J hard being very popular)
X: "Balanced" blend, similar to JFT Blue/ Green. Soft is equivalent to Green, medium to Blue in hardness. Great for carpet!
Y: High synthetic blend with lower grip, and is not a very popular variety.
Z: A very expensive "special" foam that is supposed to be magic on asphalt. Only make it in soft shore.
European tires:
There are many great European foam tire brands that use their own types of foam, as well as traditional foams. SOmeone with more knowledge about them will need to fill this in!

Tire Diameter:
If you are racing on carpet, you have to evaluate how much grip your track has. If your track is low to medium grip, you can run bigger tires. If you are on higher bite you have to cut them smaller, there is simply no way around it. Bigger tires are needed for asphalt, especially in the rear. The larger tires provide much needed lateral bite.

Carpet (mm):
Low - Medium Bite
Front: 42.0 - 42.5
Rear: 42.5 - 43.00
Medium - High Bite
Front: 40.5 - 41.0
Rear: 41.5 - 42.0
Big Race
Front: 39.5 - 40.0
Rear: 40.5 - 41.0
Asphalt (mm):
Parking Lot
Front: 43.0 - 44.0
Rear: 44.0 - 45.0
Prepped High Bite
Front: 42.0 - 43.0
Rear: 43.0 - 44.0

Tire Saucing:
Most facilities have moved towards odorless traction additives such as SXT. Some of additives evaporate very quickly and some do not. This seems to be something that is also dependent on tire compound and ambient temperature. For example, saucing a Green compound seems like it never dries, especially when tjhe temperature is lower. We have found that wiping the tires off 15 minutes before we go run allows the sauce to cure, which makes the car come in much quicker with Green rears. Blue compounds on the other hand, do fine when wiped off right before hitting the track.

Saucing half front and full rear is a good initial starting point. If the front of the car is too agressive you can sauce les than half, or for a shorter amount of time.
Tire Fuzzing:
In conditions of increasing grip, foam tires will somewtimes get sticky and pick up fuzz and debris from the track. This is highly dependent on the rubber sedan tire that is being run at your local track and the compound/ type of foam you are running on you car. The softer the sedan tire and the harder/higher rubber content in your foam tire, trouble with fuzzing seems more likely to occur.

There are ways to get around fuzzing under most conditions, and usually involves the selection of the correct foam compound. The more fuzz you get, the softer/lower rubber content you want to run.

Examples:
Problem: Car fuzzes with Lilac/Team Purple fronts and car starts pushing.
Solution: Use a softer front tire and or different family of foam. Replace it with Blue or Double Blue front.

Problem: Car loses rear bite 6 minutes into the run. Blue rear tires look almost clean but have small carpet hairs.
Solution: Use Green rear tires. The softer compound wears instead of getting sticky, minimizing fuzz.

Tire Selection:
Starting out, pick 2 tire compounds for the front and rear. The following should have you covered 99% of the time.

Front - Green and Blue (BSR) or Green and Light Blue (JFT)
Rear - Blue and Double Blue (BSR) or Blue and Dark Blue (JFT)

You may wonder about other compounds out there and if they might be better, trust me, they probably won't be. Even if there are other tires that can be as fast, the synthetic family wears out really fast and the high natural rubber will probably fuzz on you over an 8 minute run. The blends family seems to be the most versatile foam type available today. They last awhile, and sticking to them will make your process of tire selection simpler.
Tire Charts:
BSR/CRC/Jaco



Contact



Corally



JFT (Japan Foam Tire)



Ulti



Enneti (Xceed)



ELECTRONICS:
ESC:
As of now, ROAR is staying 1S (3.7V nominal; 4.2V fully charged) for 1/12. There are many 1S ESC's with a built in BEC so nothing else is required to power the receiver and servo.

If you don't want to lock yourself into a 1S specific ESC, you do have other options! It is possible to use your 2S ESC without a booster or receiver pack, and the ESC simply supplies the lower voltage. If that does not appeal to you, you will need to use an Rx pack or booster. The Rx pack and booster will both supply the receiver with a higher voltage than the 1S pack.

If you decide to use an Rx pack, MAKE SURE TO REMOVE THE RED WIRE FROM THE ESC PLUG THAT GOES INTO THE RECEIVER!!!

If you choose to use a voltage booster, it works exactly how it sounds. Instead of plugging the ESC into the receiver, it plugs into the booster, and the booster plug goes to the ESC, supplying the higher voltage.

1S ESC:
If there are any missing please add them!!

If anyone would like a need for a chart comparing the ESC's specs PM fenton06 and I'll get one made and put in here!
Voltage Boosters:
If there are any missing please add them!
Servos:
BODIES:
Black Art (CRC - US Dist):
  • Audi R8C - BA002 - .020 Thick



  • Black Market (Mohawk 12) - BA005 - .020



  • Lola B10 - BA006 - .020 thick
  • Toyota TS030 - BA008 - .020 thick

    Lola - black/red, TS030 - green/pink


PROTOForm:

Reflex Racing/RSD:

SUSPENSION ADJUSTMENTS:

Print Wikipost

Reply
 
Thread Tools Search this Thread
Old 07-07-2007, 08:01 PM   #26146
Tech Champion
 
JayBee's Avatar
 
Join Date: Mar 2004
Location: 12TH-MAN COUNTRY
Posts: 6,803
Trader Rating: 31 (100%+)
Default Odpurple....

OD I had to pull off a marathon session today but Spiderman is back!! So now I can go get some legit track time for Nats

Now off for some Transformer & Shrek3 Fam-time LOL.........
__________________
R C 3 G R A F I X _ F U S I O N . G R A P H I X _ S E A T T L E - R/C - R A C E R S _ E M E R A L D C I T Y R C . C O M

A E - 12R5.2 _ S M - REV8 PRO

Last edited by JayBee; 09-12-2008 at 10:33 PM.
JayBee is offline   Reply With Quote
Old 07-07-2007, 08:08 PM   #26147
Tech Champion
 
AdrianM's Avatar
 
Join Date: Aug 2001
Location: Tampa, FL
Posts: 5,914
Trader Rating: 4 (100%+)
Default

In talking with the LRP guys they really tried to make their motor the same speed as the Novak. They made changes to slow it down all the way up to the release date.

The Stock X11 13.5 with a bonded rotor is about the same as the Novak with a sintered rotor. If you fit a sintered rotor from the X11 3.5 motor it is pretty much the same speed as a 19T.

BL motors and BL racing is still in its infancy. Don't complain if every 3 months a new 13.5 (or 10.5) comes out that blows away the motor you currently own. You wanted BL racing and now you got it.
AdrianM is offline   Reply With Quote
Old 07-07-2007, 08:13 PM   #26148
Tech Elite
 
odpurple's Avatar
 
Join Date: Dec 2002
Location: San Francisco
Posts: 2,187
Default

Quote:
Originally Posted by JayBee View Post
OD I had to pull off a marathon session today but Spiderman is back!! So now I can go get some legit track time for Nats

Now off for some Transformer & Shrek3 Fam-time LOL.........
Go Spidey!

Now call me cuz I'm thinkin of cuttin your ears off
odpurple is offline   Reply With Quote
Old 07-07-2007, 08:27 PM   #26149
Tech Elite
 
mike ivy's Avatar
 
Join Date: Feb 2002
Location: Comin at ya from a distant galaxy
Posts: 2,784
Trader Rating: 50 (100%+)
Default

odpurple ygpm question for ya
__________________
[-eXpress motorsports-] [-TQ Wire-]

1/12th Fo' Life!!! R.I.P Mike Reedy, R.I.P John Williams

[-Horsham RC-] [-Jackson RC-] [-RC Car World-] [ Black Out Free 2015 ]
mike ivy is offline   Reply With Quote
Old 07-07-2007, 08:36 PM   #26150
Tech Elite
 
mike ivy's Avatar
 
Join Date: Feb 2002
Location: Comin at ya from a distant galaxy
Posts: 2,784
Trader Rating: 50 (100%+)
Default

AdrianM ygpm Question for ya
__________________
[-eXpress motorsports-] [-TQ Wire-]

1/12th Fo' Life!!! R.I.P Mike Reedy, R.I.P John Williams

[-Horsham RC-] [-Jackson RC-] [-RC Car World-] [ Black Out Free 2015 ]
mike ivy is offline   Reply With Quote
Old 07-07-2007, 09:38 PM   #26151
Tech Elite
 
RED-LINE M03's Avatar
 
Join Date: Jun 2005
Location: >>> USA <<<
Posts: 4,102
Trader Rating: 127 (100%+)
Default CLOSET CLEAN OUT

DOES ANYONE HAVE THIS COLLECTING DUST...........


PROJECT CAR



http://www.rctech.net/forum/showthre...46#post3464046





THANKS FOR LOOKING......
RED-LINE M03 is offline   Reply With Quote
Old 07-08-2007, 03:18 AM   #26152
Tech Elite
 
Trips's Avatar
 
Join Date: Aug 2001
Location: 360 Speedway
Posts: 2,251
Trader Rating: 16 (100%+)
Default

Quote:
Originally Posted by fast-ho-cars View Post
ROAR from what i understand is looking at rating BL spec motors by KV due to the differences by the manufactures.

That'll be a mistake, about the equivalent of "rating" stock brushed motors based on no-load RPM...
__________________
MARSHAL!!
Trips is offline   Reply With Quote
Old 07-08-2007, 07:10 AM   #26153
Tech Fanatic
 
Join Date: Feb 2007
Location: ny
Posts: 957
Trader Rating: 5 (100%+)
Send a message via AIM to Carpetracer92
Default

Hey can some one please give me a really fast setup for a crc ck 3.1.

Heres my track http://youtube.com/watch?v=d0kEgyOYaa4

My email is Subaruwrx9216@aol.com so please help
__________________
Check out Long Island Low N Slow


Garage= Slammed g37,Full Exhaust
Carpetracer92 is offline   Reply With Quote
Old 07-08-2007, 09:57 AM   #26154
Tech Master
 
Big B's Avatar
 
Join Date: Dec 2006
Location: Kent, WA
Posts: 1,154
Trader Rating: 4 (100%+)
Default

If all these BL motors are different eventhough the number on the side is the same (13.5, 10.5, etc..) I just don't see how rating them on one thing (KV) will work.
__________________
Traxxas Slash 4x4, Team Checkpoint TC-1030 Charger and Power Supply, Team Checkpoint Lipo Balancer
Big B is offline   Reply With Quote
Old 07-08-2007, 11:04 AM   #26155
Tech Champion
 
AdrianM's Avatar
 
Join Date: Aug 2001
Location: Tampa, FL
Posts: 5,914
Trader Rating: 4 (100%+)
Default

All you can do is make construction specifications to govern as many variables as possible. Just like 27T there will be new motors coming out a couple times a year and you will just have to buy them to keep up.
AdrianM is offline   Reply With Quote
Old 07-08-2007, 12:18 PM   #26156
Tech Master
 
Big B's Avatar
 
Join Date: Dec 2006
Location: Kent, WA
Posts: 1,154
Trader Rating: 4 (100%+)
Default

Quote:
Originally Posted by AdrianM View Post
All you can do is make construction specifications to govern as many variables as possible. Just like 27T there will be new motors coming out a couple times a year and you will just have to buy them to keep up.
These Companies must think we are made of money, but its not all their fault, I think there needs to be strickter guidlines for Brushed and Brushless Motors. Up here at SIR the fast lap a couple weeks ago in Stock was 12.2 the fastest 19T was 12.5 . I am on a budget like many other racers are, and we are falling behind. I have been criticized by some racers at our track for buying parts and equipment online and not from our onsite hobby shop, but their is a $5 difference for every $20 (differs), might not seem like much to them, but to me it is the difference between practicing 8 times a month, vs 4 times. Not to mention our Xray stock is always low or gone, due to RcAmerica taking their sweet a$$ time sending our track stuff, even if we call ahead and to make sure its in stock, it is still a month or two before it comes in.
But I am getting WAY off subject, Sorry
__________________
Traxxas Slash 4x4, Team Checkpoint TC-1030 Charger and Power Supply, Team Checkpoint Lipo Balancer
Big B is offline   Reply With Quote
Old 07-08-2007, 12:25 PM   #26157
Tech Master
 
rchoudini's Avatar
 
Join Date: Mar 2005
Location: Kent, Wa,
Posts: 1,813
Default

Quote:
Originally Posted by JayBee View Post
OD I had to pull off a marathon session today but Spiderman is back!! So now I can go get some legit track time for Nats

Now off for some Transformer & Shrek3 Fam-time LOL.........
JB looks like you gay'd it up real good........

Now get your ass down here for practice.
rchoudini is offline   Reply With Quote
Old 07-08-2007, 12:54 PM   #26158
Tech Champion
 
AdrianM's Avatar
 
Join Date: Aug 2001
Location: Tampa, FL
Posts: 5,914
Trader Rating: 4 (100%+)
Default

Quote:
Originally Posted by Big B View Post
These Companies must think we are made of money, but its not all their fault, I think there needs to be strickter guidlines for Brushed and Brushless Motors. Up here at SIR the fast lap a couple weeks ago in Stock was 12.2 the fastest 19T was 12.5 . I am on a budget like many other racers are, and we are falling behind. I have been criticized by some racers at our track for buying parts and equipment online and not from our onsite hobby shop, but their is a $5 difference for every $20 (differs), might not seem like much to them, but to me it is the difference between practicing 8 times a month, vs 4 times. Not to mention our Xray stock is always low or gone, due to RcAmerica taking their sweet a$$ time sending our track stuff, even if we call ahead and to make sure its in stock, it is still a month or two before it comes in.
But I am getting WAY off subject, Sorry
The brushless situation we will be in soon is all your fault as a consumer(speaking generally..not you in particular)

You all wanted brushless now rather than later. You want to race it now before its fully figured out so guess what...you got it.

ALL of the BL motor manufacturers are just scrambling to get you all what you want.
AdrianM is offline   Reply With Quote
Old 07-08-2007, 01:01 PM   #26159
Tech Apprentice
 
Join Date: Jun 2007
Location: America
Posts: 79
Default 12th scaler

Adrian, good interview on www.rctvlive.com it made me want to take a look at your new car just when I thought I had my 12th scale picked out (crc)!

When will this car be available the guys at rctv did not know. nice job again on the interview
outrunner25 is offline   Reply With Quote
Old 07-08-2007, 05:20 PM   #26160
Tech Master
 
Big B's Avatar
 
Join Date: Dec 2006
Location: Kent, WA
Posts: 1,154
Trader Rating: 4 (100%+)
Default

Quote:
Originally Posted by AdrianM View Post
The brushless situation we will be in soon is all your fault as a consumer(speaking generally..not you in particular)

You all wanted brushless now rather than later. You want to race it now before its fully figured out so guess what...you got it.

ALL of the BL motor manufacturers are just scrambling to get you all what you want.
Well I am perfectly happy with brushed motors and Nimh batts, but both brushless and lipo are selling like crazy, I would much rather see BL, and lipos fade away like beta tapes (Oh, and they can take HD DVD and Blueray with them )
__________________
Traxxas Slash 4x4, Team Checkpoint TC-1030 Charger and Power Supply, Team Checkpoint Lipo Balancer
Big B is offline   Reply With Quote
Reply

Similar Threads
Thread Thread Starter Forum Replies Last Post
New to the forum mig rod Electric Off-Road 1 01-05-2008 05:23 PM
hi i need help and im new to the forum racer4 Rookie Zone 4 01-21-2007 02:37 PM
Why is this forum listed under the On Road Forum? sport10 Onroad Nitro Engine Zone 0 01-11-2007 08:06 AM
Forum Changes... futureal Wisconsin & Illinois Racing 3 10-28-2002 09:26 PM



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off



All times are GMT -7. It is currently 07:20 PM.


Powered By: vBulletin v3.9.2.1
Privacy Policy | Terms of Use | Advertise Content © 2001-2011 RCTech.net

SEO by vBSEO 3.5.0