R/C Tech Forums

Go Back   R/C Tech Forums > General Forums > Electric On-Road

    Hide Wikipost
Old 10-28-2016, 12:43 PM   -   Wikipost
R/C Tech Forums Thread Wiki: 1/12 forum
Please read: This is a community-maintained wiki post containing the most important information from this thread. You may edit the Wiki once you have been a member for 90 days and have made 90 posts.
 
Last edit by: fenton06
This is a place to share knowledge related to 1/12th scale racing. It is not to be used for conversations.

KITS:
Click links to go to manufacturer product page. If any are missing please add them!

TIRES:
Pre-mounted tires readily available in the US:
Pre-mounted tires readily available in the Europe:
  • Hot Race ??

Gluing your own donuts:
https://www.youtube.com/watch?v=hm7z1rz-74s - Special thanks to Edward Pickering!
Truing tires:
https://www.youtube.com/watch?v=8wqHOLWq6Uc - Special thanks to Edward Pickering!

The following information came from HERE, with some editing and information added. Thanks Christian!

THIS MAY NEED UPDATING FOR THE NEW BLACK CRC CARPET

Brands:
BSR, CRC, Jaco:
Pro One is no longer selling to the public, but it and the brands above are all mounted by BSR and use the same foam. The nomenclature of the BSR vs Jaco/CRC is a little different in a few instances but is otherwise the same. The BSR foam consists of three families, and can be identifed as synthetics, naturals, and blends.

Synthetics - The old school, light weight, easy to true "dry feeling" tires. These include tires like CRC/Jaco Yellow (BSR White), Black, Gray, etc. These tires offer the highest wear rate and lowest grip. Many racers continue to use these nder high bite conditions.

Naturals - These tires are usually the best alternative for low bite and asphalt. They include Pink, Magenta, Double Pink, Lilac (BSR Team Purple), Purple, and other tires. These tires provide a ton of grip, but tend to get sticky in high bite conditions. This rubber does not wear as easily, and the cars will pick up gunk and fibers from the carpet under most high bite conditions. This is especially bad if the humidity is high.

Blends - These are the tires most people run today. They were initially called "JFT foam" by some, as it was believed that the tires were the same as the JFT tires. We can divide the blends further into two groups: high rubber and low rubber content. The high rubber would be the new rear Orange and Red from the BSR family, and the low rubber would be the Green and Blue varieties. When, asked about the difference, John Foister from BSR Tires said they came from the same "family" of foam, but they offered different grip. According to John, the Green/Blue has more bite than Orange/Red, but from track testing Oranges offer more bite than Green (being equivalent to in hardness) when the grip is high and absolutely no grip when it is lower. The Orange foam has a denser pore structure and the tire is not as prone to chunking. It is also important to note is that BSR Blue rears are not the same as the BSR Blue fronts!

JFT:
JFT stands for Japan Foam Tire. They started the new wave of foam tires we are all using now (Blue/Blu, Green/Greene, Dbl Blue, etc). These tires are a little different than the BSR tire family, but work in very similar conditions. They offers four varieties A (asphalt), C (carpet), S (???), and R (???). This does not mean that those types only work on that surface, but this is what they recommend.

JFT uses the same foam for fronts and rears if the color is the same.

A: Used on asphalt, considered close to the natural rubber variety and are named consistently with other natural tires.
C: Used on carpet, considered a blend.
S: Used on carpet?, tires are ???
R: Used on carpet?, tires are ???

For setup, the JFT foam seem to generate more bite than the BSR, therefore the car tends to be a little more aggressive.

Ulti:
Ulti is another Japanese brand that offers an array of compounds. They have their own way of rating tires, and are difficult to equate to other brands. They have 4 different varieties, each in varying degrees of hardness.

J: High rubber content tire, similar to Pink/ Magenta. Soft would be close to a pink. These offer the most bite and are great for asphalt/carpet front tire. (J hard being very popular)
X: "Balanced" blend, similar to JFT Blue/ Green. Soft is equivalent to Green, medium to Blue in hardness. Great for carpet!
Y: High synthetic blend with lower grip, and is not a very popular variety.
Z: A very expensive "special" foam that is supposed to be magic on asphalt. Only make it in soft shore.
European tires:
There are many great European foam tire brands that use their own types of foam, as well as traditional foams. SOmeone with more knowledge about them will need to fill this in!

Tire Diameter:
If you are racing on carpet, you have to evaluate how much grip your track has. If your track is low to medium grip, you can run bigger tires. If you are on higher bite you have to cut them smaller, there is simply no way around it. Bigger tires are needed for asphalt, especially in the rear. The larger tires provide much needed lateral bite.

Carpet (mm):
Low - Medium Bite
Front: 42.0 - 42.5
Rear: 42.5 - 43.00
Medium - High Bite
Front: 40.5 - 41.0
Rear: 41.5 - 42.0
Big Race
Front: 39.5 - 40.0
Rear: 40.5 - 41.0
Asphalt (mm):
Parking Lot
Front: 43.0 - 44.0
Rear: 44.0 - 45.0
Prepped High Bite
Front: 42.0 - 43.0
Rear: 43.0 - 44.0

Tire Saucing:
Most facilities have moved towards odorless traction additives such as SXT. Some of additives evaporate very quickly and some do not. This seems to be something that is also dependent on tire compound and ambient temperature. For example, saucing a Green compound seems like it never dries, especially when tjhe temperature is lower. We have found that wiping the tires off 15 minutes before we go run allows the sauce to cure, which makes the car come in much quicker with Green rears. Blue compounds on the other hand, do fine when wiped off right before hitting the track.

Saucing half front and full rear is a good initial starting point. If the front of the car is too agressive you can sauce les than half, or for a shorter amount of time.
Tire Fuzzing:
In conditions of increasing grip, foam tires will somewtimes get sticky and pick up fuzz and debris from the track. This is highly dependent on the rubber sedan tire that is being run at your local track and the compound/ type of foam you are running on you car. The softer the sedan tire and the harder/higher rubber content in your foam tire, trouble with fuzzing seems more likely to occur.

There are ways to get around fuzzing under most conditions, and usually involves the selection of the correct foam compound. The more fuzz you get, the softer/lower rubber content you want to run.

Examples:
Problem: Car fuzzes with Lilac/Team Purple fronts and car starts pushing.
Solution: Use a softer front tire and or different family of foam. Replace it with Blue or Double Blue front.

Problem: Car loses rear bite 6 minutes into the run. Blue rear tires look almost clean but have small carpet hairs.
Solution: Use Green rear tires. The softer compound wears instead of getting sticky, minimizing fuzz.

Tire Selection:
Starting out, pick 2 tire compounds for the front and rear. The following should have you covered 99% of the time.

Front - Green and Blue (BSR) or Green and Light Blue (JFT)
Rear - Blue and Double Blue (BSR) or Blue and Dark Blue (JFT)

You may wonder about other compounds out there and if they might be better, trust me, they probably won't be. Even if there are other tires that can be as fast, the synthetic family wears out really fast and the high natural rubber will probably fuzz on you over an 8 minute run. The blends family seems to be the most versatile foam type available today. They last awhile, and sticking to them will make your process of tire selection simpler.
Tire Charts:
BSR/CRC/Jaco



Contact



Corally



JFT (Japan Foam Tire)



Ulti



Enneti (Xceed)



ELECTRONICS:
ESC:
As of now, ROAR is staying 1S (3.7V nominal; 4.2V fully charged) for 1/12. There are many 1S ESC's with a built in BEC so nothing else is required to power the receiver and servo.

If you don't want to lock yourself into a 1S specific ESC, you do have other options! It is possible to use your 2S ESC without a booster or receiver pack, and the ESC simply supplies the lower voltage. If that does not appeal to you, you will need to use an Rx pack or booster. The Rx pack and booster will both supply the receiver with a higher voltage than the 1S pack.

If you decide to use an Rx pack, MAKE SURE TO REMOVE THE RED WIRE FROM THE ESC PLUG THAT GOES INTO THE RECEIVER!!!

If you choose to use a voltage booster, it works exactly how it sounds. Instead of plugging the ESC into the receiver, it plugs into the booster, and the booster plug goes to the ESC, supplying the higher voltage.

1S ESC:
If there are any missing please add them!!

If anyone would like a need for a chart comparing the ESC's specs PM fenton06 and I'll get one made and put in here!
Voltage Boosters:
If there are any missing please add them!
Servos:
BODIES:
Black Art (CRC - US Dist):
  • Audi R8C - BA002 - .020 Thick



  • Black Market (Mohawk 12) - BA005 - .020



  • Lola B10 - BA006 - .020 thick
  • Toyota TS030 - BA008 - .020 thick

    Lola - black/red, TS030 - green/pink


PROTOForm:

Reflex Racing/RSD:

SUSPENSION ADJUSTMENTS:

Print Wikipost

Reply
 
Thread Tools Search this Thread
Old 06-28-2007, 10:48 AM   #26011
Tech Master
 
Big B's Avatar
 
Join Date: Dec 2006
Location: Kent, WA
Posts: 1,154
Trader Rating: 4 (100%+)
Default

Quote:
Originally Posted by Nova F1 Racer View Post
Asphalt mostly, but a car that can adapt to both would be nice. I've seen many a battey pack "touch" when its 2x2 with a wire in the middle and they are a hassle to use.
like I said on asphault a t-bar is the way to go, or the BMI D12R. A t-bar will work on both asphault and carpet, but you will have a hard time adapting a pod style car to asphault. All you have to do when using a saddle pack is have a little common sense and handle it appropriatly, if you can do that then there is no reason to fear a saddle pack.
__________________
Traxxas Slash 4x4, Team Checkpoint TC-1030 Charger and Power Supply, Team Checkpoint Lipo Balancer
Big B is offline   Reply With Quote
Old 06-28-2007, 02:10 PM   #26012
Tech Master
 
t9dragon's Avatar
 
Join Date: Jan 2004
Location: Oregon
Posts: 1,197
Trader Rating: 12 (100%+)
Send a message via ICQ to t9dragon Send a message via AIM to t9dragon Send a message via MSN to t9dragon Send a message via Yahoo to t9dragon
Default

What is the difference between the Corally 1/12 cars?
t9dragon is offline   Reply With Quote
Old 06-28-2007, 03:38 PM   #26013
Tech Lord
 
protc3's Avatar
 
Join Date: Jun 2003
Location: Spring Hill,Florida
Posts: 10,813
Trader Rating: 13 (100%+)
Default

here is a couple pics of the brushless motor in the pod as requested.
Attached Thumbnails
1/12 forum-b-pod-1.jpg   1/12 forum-b-pod-2.jpg  
__________________
Jason Breiner
BMI Racing
Team Associated
J Concepts
protc3 is offline   Reply With Quote
Old 06-28-2007, 03:54 PM   #26014
Tech Lord
 
protc3's Avatar
 
Join Date: Jun 2003
Location: Spring Hill,Florida
Posts: 10,813
Trader Rating: 13 (100%+)
Default

Quote:
Originally Posted by Nova F1 Racer View Post
Looking at geting a new 12 scale for the next racing season and trying to get the list down....

I DO NOT want a car with a T-bar, nope no-way and I want the battery packs to be all in a row, no split packs... And have spare parts available....
So I guess that narrows down the field...

Suggestions? And please no bashing... I hav ethe Hara Hammer and like it but parts are hard to come by...

T bar cars are usually the car of choice on asphalt.link cars have an inherint push that is very difficult to rid the car of but it is very easy to drive.our DB12R handles similar to a T bar car without the T bar,very aggressive,good steering,yet takes the bumps well due to the fact you can isolate side to side and forward and aft spring tension.all the cars out feel good when driving them.T bar cars and my DB12R will fit a more aggressive driver,a link car is more mellow and easy to drive.down here in florida the DB12R and T bar cars are all that makes the top 5 at our state series races.
__________________
Jason Breiner
BMI Racing
Team Associated
J Concepts
protc3 is offline   Reply With Quote
Old 06-28-2007, 04:07 PM   #26015
Tech Lord
 
protc3's Avatar
 
Join Date: Jun 2003
Location: Spring Hill,Florida
Posts: 10,813
Trader Rating: 13 (100%+)
Default

just a note,i am not saying link cars are no good,they just seem to be more targeted towards carpet racing.they work very well on carpet.
__________________
Jason Breiner
BMI Racing
Team Associated
J Concepts
protc3 is offline   Reply With Quote
Old 06-28-2007, 04:09 PM   #26016
Tech Lord
 
protc3's Avatar
 
Join Date: Jun 2003
Location: Spring Hill,Florida
Posts: 10,813
Trader Rating: 13 (100%+)
Default

Quote:
Originally Posted by t9dragon View Post
What is the difference between the Corally 1/12 cars?
which ones?they have had a bunch of em.
__________________
Jason Breiner
BMI Racing
Team Associated
J Concepts
protc3 is offline   Reply With Quote
Old 06-28-2007, 04:20 PM   #26017
Tech Elite
 
RCSteve93's Avatar
 
Join Date: Dec 2005
Location: Long Island, New York
Posts: 4,603
Trader Rating: 11 (100%+)
Default

Quote:
Originally Posted by protc3 View Post
here is a couple pics of the brushless motor in the pod as requested.
I have some questions. Will they fit the CRC 3.2R? Will they come anodized, and if so, whet colors do you plan to produces them in? And lastly I have some statements. They look sick, and I am going to buy a set if they work for my car. The DB12R looks really cool, and the design makes sense to me. Once I see more pictures, and the online store is set up, I will be saving up, because I have heard good things about the machining and quality of your kits.
__________________
rm -rf /windows
RCSteve93 is offline   Reply With Quote
Old 06-28-2007, 04:23 PM   #26018
Tech Master
 
t9dragon's Avatar
 
Join Date: Jan 2004
Location: Oregon
Posts: 1,197
Trader Rating: 12 (100%+)
Send a message via ICQ to t9dragon Send a message via AIM to t9dragon Send a message via MSN to t9dragon Send a message via Yahoo to t9dragon
Default

Quote:
Originally Posted by protc3 View Post
which ones?they have had a bunch of em.
The newer ones. I'm not really sure. I am new to 1/12 carpet racing. I have seen several different ones listed for sale on the forums and ebay. So I was just curious what the differences were and which ones were better. I am only going to race on carpet, if that helps.
t9dragon is offline   Reply With Quote
Old 06-28-2007, 04:24 PM   #26019
Tech Lord
 
protc3's Avatar
 
Join Date: Jun 2003
Location: Spring Hill,Florida
Posts: 10,813
Trader Rating: 13 (100%+)
Default

thanks buddy.the pod will fit any car that uses the standard AE screw hole locations in there lower plate.they will be anodized with the rest of the aluminum parts.i am thinking gun metal grey but i am not 100% on that yet.i will be working on getting the online store set up and getting kits ready asap.thanks again for the kind words.
__________________
Jason Breiner
BMI Racing
Team Associated
J Concepts
protc3 is offline   Reply With Quote
Old 06-28-2007, 04:25 PM   #26020
Tech Elite
 
bigb11's Avatar
 
Join Date: Jan 2006
Location: POUGHKEEPSIE,NY
Posts: 3,126
Trader Rating: 59 (100%+)
Send a message via AIM to bigb11
Default

Quote:
Originally Posted by protc3 View Post
here is a couple pics of the brushless motor in the pod as requested.
JASON, ANOTHER WORK OF ART!!!!!!!! SWEET!!!!

MARVET
bigb11 is offline   Reply With Quote
Old 06-28-2007, 04:27 PM   #26021
Tech Lord
 
protc3's Avatar
 
Join Date: Jun 2003
Location: Spring Hill,Florida
Posts: 10,813
Trader Rating: 13 (100%+)
Default

Quote:
Originally Posted by t9dragon View Post
The newer ones. I'm not really sure. I am new to 1/12 carpet racing. I have seen several different ones listed for sale on the forums and ebay. So I was just curious what the differences were and which ones were better. I am only going to race on carpet, if that helps.
out of all the corally cars,the only one ever worth getting is the new one,the SP12X.it allows you to use alot of the AE parts such as the front end and i believe the T bar also.if you go for the corally,go for the SP12X with the AE front end.its the only one i have seen work well.
__________________
Jason Breiner
BMI Racing
Team Associated
J Concepts
protc3 is offline   Reply With Quote
Old 06-28-2007, 04:27 PM   #26022
Tech Lord
 
protc3's Avatar
 
Join Date: Jun 2003
Location: Spring Hill,Florida
Posts: 10,813
Trader Rating: 13 (100%+)
Default

Quote:
Originally Posted by bigb11 View Post
JASON, ANOTHER WORK OF ART!!!!!!!! SWEET!!!!

MARVET
thanks bro
__________________
Jason Breiner
BMI Racing
Team Associated
J Concepts
protc3 is offline   Reply With Quote
Old 06-28-2007, 04:35 PM   #26023
Tech Master
 
t9dragon's Avatar
 
Join Date: Jan 2004
Location: Oregon
Posts: 1,197
Trader Rating: 12 (100%+)
Send a message via ICQ to t9dragon Send a message via AIM to t9dragon Send a message via MSN to t9dragon Send a message via Yahoo to t9dragon
Default

protc3, Do you have instant messenger? I have alot of questions about 1/12 carpet racing.
t9dragon is offline   Reply With Quote
Old 06-28-2007, 04:38 PM   #26024
Tech Lord
 
protc3's Avatar
 
Join Date: Jun 2003
Location: Spring Hill,Florida
Posts: 10,813
Trader Rating: 13 (100%+)
Default

probrein@cs.com.i will be using that account shortly.hit me up on there.
__________________
Jason Breiner
BMI Racing
Team Associated
J Concepts
protc3 is offline   Reply With Quote
Old 06-28-2007, 04:44 PM   #26025
Tech Champion
 
Join Date: Nov 2001
Location: Hawaii, USA
Posts: 7,157
Default

Man I wish my link cars had push...I've always noticed more agressive steering on link cars then on t-bar cars.
InspGadgt is offline   Reply With Quote
Reply

Similar Threads
Thread Thread Starter Forum Replies Last Post
New to the forum mig rod Electric Off-Road 1 01-05-2008 05:23 PM
hi i need help and im new to the forum racer4 Rookie Zone 4 01-21-2007 02:37 PM
Why is this forum listed under the On Road Forum? sport10 Onroad Nitro Engine Zone 0 01-11-2007 08:06 AM
Forum Changes... futureal Wisconsin & Illinois Racing 3 10-28-2002 09:26 PM



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off



All times are GMT -7. It is currently 07:16 AM.


Powered By: vBulletin v3.9.2.1
Privacy Policy | Terms of Use | Advertise Content © 2001-2011 RCTech.net

SEO by vBSEO 3.5.0