R/C Tech Forums

Go Back   R/C Tech Forums > General Forums > Electric On-Road

    Hide Wikipost
Old 10-28-2016, 12:43 PM   -   Wikipost
R/C Tech Forums Thread Wiki: 1/12 forum
Please read: This is a community-maintained wiki post containing the most important information from this thread. You may edit the Wiki once you have been a member for 90 days and have made 90 posts.
 
Last edit by: fenton06
This is a place to share knowledge related to 1/12th scale racing. It is not to be used for conversations.

KITS:
Click links to go to manufacturer product page. If any are missing please add them!

TIRES:
Pre-mounted tires readily available in the US:
Pre-mounted tires readily available in the Europe:
  • Hot Race ??

Gluing your own donuts:
https://www.youtube.com/watch?v=hm7z1rz-74s - Special thanks to Edward Pickering!
Truing tires:
https://www.youtube.com/watch?v=8wqHOLWq6Uc - Special thanks to Edward Pickering!

The following information came from HERE, with some editing and information added. Thanks Christian!

THIS MAY NEED UPDATING FOR THE NEW BLACK CRC CARPET

Brands:
BSR, CRC, Jaco:
Pro One is no longer selling to the public, but it and the brands above are all mounted by BSR and use the same foam. The nomenclature of the BSR vs Jaco/CRC is a little different in a few instances but is otherwise the same. The BSR foam consists of three families, and can be identifed as synthetics, naturals, and blends.

Synthetics - The old school, light weight, easy to true "dry feeling" tires. These include tires like CRC/Jaco Yellow (BSR White), Black, Gray, etc. These tires offer the highest wear rate and lowest grip. Many racers continue to use these nder high bite conditions.

Naturals - These tires are usually the best alternative for low bite and asphalt. They include Pink, Magenta, Double Pink, Lilac (BSR Team Purple), Purple, and other tires. These tires provide a ton of grip, but tend to get sticky in high bite conditions. This rubber does not wear as easily, and the cars will pick up gunk and fibers from the carpet under most high bite conditions. This is especially bad if the humidity is high.

Blends - These are the tires most people run today. They were initially called "JFT foam" by some, as it was believed that the tires were the same as the JFT tires. We can divide the blends further into two groups: high rubber and low rubber content. The high rubber would be the new rear Orange and Red from the BSR family, and the low rubber would be the Green and Blue varieties. When, asked about the difference, John Foister from BSR Tires said they came from the same "family" of foam, but they offered different grip. According to John, the Green/Blue has more bite than Orange/Red, but from track testing Oranges offer more bite than Green (being equivalent to in hardness) when the grip is high and absolutely no grip when it is lower. The Orange foam has a denser pore structure and the tire is not as prone to chunking. It is also important to note is that BSR Blue rears are not the same as the BSR Blue fronts!

JFT:
JFT stands for Japan Foam Tire. They started the new wave of foam tires we are all using now (Blue/Blu, Green/Greene, Dbl Blue, etc). These tires are a little different than the BSR tire family, but work in very similar conditions. They offers four varieties A (asphalt), C (carpet), S (???), and R (???). This does not mean that those types only work on that surface, but this is what they recommend.

JFT uses the same foam for fronts and rears if the color is the same.

A: Used on asphalt, considered close to the natural rubber variety and are named consistently with other natural tires.
C: Used on carpet, considered a blend.
S: Used on carpet?, tires are ???
R: Used on carpet?, tires are ???

For setup, the JFT foam seem to generate more bite than the BSR, therefore the car tends to be a little more aggressive.

Ulti:
Ulti is another Japanese brand that offers an array of compounds. They have their own way of rating tires, and are difficult to equate to other brands. They have 4 different varieties, each in varying degrees of hardness.

J: High rubber content tire, similar to Pink/ Magenta. Soft would be close to a pink. These offer the most bite and are great for asphalt/carpet front tire. (J hard being very popular)
X: "Balanced" blend, similar to JFT Blue/ Green. Soft is equivalent to Green, medium to Blue in hardness. Great for carpet!
Y: High synthetic blend with lower grip, and is not a very popular variety.
Z: A very expensive "special" foam that is supposed to be magic on asphalt. Only make it in soft shore.
European tires:
There are many great European foam tire brands that use their own types of foam, as well as traditional foams. SOmeone with more knowledge about them will need to fill this in!

Tire Diameter:
If you are racing on carpet, you have to evaluate how much grip your track has. If your track is low to medium grip, you can run bigger tires. If you are on higher bite you have to cut them smaller, there is simply no way around it. Bigger tires are needed for asphalt, especially in the rear. The larger tires provide much needed lateral bite.

Carpet (mm):
Low - Medium Bite
Front: 42.0 - 42.5
Rear: 42.5 - 43.00
Medium - High Bite
Front: 40.5 - 41.0
Rear: 41.5 - 42.0
Big Race
Front: 39.5 - 40.0
Rear: 40.5 - 41.0
Asphalt (mm):
Parking Lot
Front: 43.0 - 44.0
Rear: 44.0 - 45.0
Prepped High Bite
Front: 42.0 - 43.0
Rear: 43.0 - 44.0

Tire Saucing:
Most facilities have moved towards odorless traction additives such as SXT. Some of additives evaporate very quickly and some do not. This seems to be something that is also dependent on tire compound and ambient temperature. For example, saucing a Green compound seems like it never dries, especially when tjhe temperature is lower. We have found that wiping the tires off 15 minutes before we go run allows the sauce to cure, which makes the car come in much quicker with Green rears. Blue compounds on the other hand, do fine when wiped off right before hitting the track.

Saucing half front and full rear is a good initial starting point. If the front of the car is too agressive you can sauce les than half, or for a shorter amount of time.
Tire Fuzzing:
In conditions of increasing grip, foam tires will somewtimes get sticky and pick up fuzz and debris from the track. This is highly dependent on the rubber sedan tire that is being run at your local track and the compound/ type of foam you are running on you car. The softer the sedan tire and the harder/higher rubber content in your foam tire, trouble with fuzzing seems more likely to occur.

There are ways to get around fuzzing under most conditions, and usually involves the selection of the correct foam compound. The more fuzz you get, the softer/lower rubber content you want to run.

Examples:
Problem: Car fuzzes with Lilac/Team Purple fronts and car starts pushing.
Solution: Use a softer front tire and or different family of foam. Replace it with Blue or Double Blue front.

Problem: Car loses rear bite 6 minutes into the run. Blue rear tires look almost clean but have small carpet hairs.
Solution: Use Green rear tires. The softer compound wears instead of getting sticky, minimizing fuzz.

Tire Selection:
Starting out, pick 2 tire compounds for the front and rear. The following should have you covered 99% of the time.

Front - Green and Blue (BSR) or Green and Light Blue (JFT)
Rear - Blue and Double Blue (BSR) or Blue and Dark Blue (JFT)

You may wonder about other compounds out there and if they might be better, trust me, they probably won't be. Even if there are other tires that can be as fast, the synthetic family wears out really fast and the high natural rubber will probably fuzz on you over an 8 minute run. The blends family seems to be the most versatile foam type available today. They last awhile, and sticking to them will make your process of tire selection simpler.
Tire Charts:
BSR/CRC/Jaco



Contact



Corally



JFT (Japan Foam Tire)



Ulti



Enneti (Xceed)



ELECTRONICS:
ESC:
As of now, ROAR is staying 1S (3.7V nominal; 4.2V fully charged) for 1/12. There are many 1S ESC's with a built in BEC so nothing else is required to power the receiver and servo.

If you don't want to lock yourself into a 1S specific ESC, you do have other options! It is possible to use your 2S ESC without a booster or receiver pack, and the ESC simply supplies the lower voltage. If that does not appeal to you, you will need to use an Rx pack or booster. The Rx pack and booster will both supply the receiver with a higher voltage than the 1S pack.

If you decide to use an Rx pack, MAKE SURE TO REMOVE THE RED WIRE FROM THE ESC PLUG THAT GOES INTO THE RECEIVER!!!

If you choose to use a voltage booster, it works exactly how it sounds. Instead of plugging the ESC into the receiver, it plugs into the booster, and the booster plug goes to the ESC, supplying the higher voltage.

1S ESC:
If there are any missing please add them!!

If anyone would like a need for a chart comparing the ESC's specs PM fenton06 and I'll get one made and put in here!
Voltage Boosters:
If there are any missing please add them!
Servos:
BODIES:
Black Art (CRC - US Dist):
  • Audi R8C - BA002 - .020 Thick



  • Black Market (Mohawk 12) - BA005 - .020



  • Lola B10 - BA006 - .020 thick
  • Toyota TS030 - BA008 - .020 thick

    Lola - black/red, TS030 - green/pink


PROTOForm:

Reflex Racing/RSD:

SUSPENSION ADJUSTMENTS:

Print Wikipost

Reply
 
Thread Tools Search this Thread
Old 03-17-2007, 06:32 PM   #24241
Super Moderator
 
Marcos.J's Avatar
R/C Tech Elite Subscriber
 
Join Date: Sep 2003
Location: Semper Fi
Posts: 25,177
Trader Rating: 140 (100%+)
Default

Quote:
Originally Posted by C_Suzuki
whats the 19t of choice for most 12th scale racers?
komodo
Marcos.J is offline   Reply With Quote
Old 03-17-2007, 06:57 PM   #24242
Tech Lord
 
protc3's Avatar
 
Join Date: Jun 2003
Location: Spring Hill,Florida
Posts: 10,813
Trader Rating: 13 (100%+)
Default

i ran our first 2 qualifiers today at our state series race with the new DB12R. After the first qualifier i was TQ.in the 2nd Qualifier,i was resetting TQ by 6 seconds with 1 minute to go and i had an 8 second lead over second place when my diff decided to come loose Mike Bruce wound up taking the win and my TQ away from me due to that. Tommorow we will be running our 3rd qualifier and our mains.hopefully i can close the deal tommorow.the car is handling like a dream.this is definately more of a car than i expected.especially with this being my 2nd race on asphalt with the car.i am going to try some more stuff tommorow.
__________________
Jason Breiner
BMI Racing
Team Associated
J Concepts
protc3 is offline   Reply With Quote
Old 03-17-2007, 07:55 PM   #24243
Tech Elite
 
Grenade10's Avatar
 
Join Date: Nov 2003
Location: Fort Collins, Colorado
Posts: 4,667
Trader Rating: 37 (100%+)
Default

Quote:
Originally Posted by C_Suzuki
whats the 19t of choice for most 12th scale racers?
In our Wednesday night 19 turn class, KD were King. I've hand tuned many and they are good. However, I have also done the Corally Spec 19, Checkpoint Money and an Integy Atlas Based. Komodo is the best overall, The Corally is easy on batteries and coming out of corner. The Integy Red - draws HUGH amps when set up correctly and would be killer on a big outside track. I tried it in Omaha and was still to much. Drained a new IB4200 pack, but it was way fast!! Just wish I could have driven it.
__________________
Darkside, Sweep, BSR, Fantom, IGT Hobbies and IGT8
Byrons Fuel, ProtoForm Bodies & Futaba Radio Gear by Choice
Founding Member of CORRC .... 5280raceway
www.darksidems.com www.igthobbies.com www.IGT8.com
Grenade10 is offline   Reply With Quote
Old 03-17-2007, 07:57 PM   #24244
Tech Elite
 
Grenade10's Avatar
 
Join Date: Nov 2003
Location: Fort Collins, Colorado
Posts: 4,667
Trader Rating: 37 (100%+)
Default

Quote:
Originally Posted by protc3
i ran our first 2 qualifiers today at our state series race with the new DB12R. After the first qualifier i was TQ.in the 2nd Qualifier,i was resetting TQ by 6 seconds with 1 minute to go and i had an 8 second lead over second place when my diff decided to come loose Mike Bruce wound up taking the win and my TQ away from me due to that. Tommorow we will be running our 3rd qualifier and our mains.hopefully i can close the deal tommorow.the car is handling like a dream.this is definately more of a car than i expected.especially with this being my 2nd race on asphalt with the car.i am going to try some more stuff tommorow.
I've run a Corally 12M Euro outside, but I was thinking that my Darkside Mx2 silver chassis could be really good as well. I'd love to see one of your cars here in Colorado to compare.

Good luck on Sunday!!
__________________
Darkside, Sweep, BSR, Fantom, IGT Hobbies and IGT8
Byrons Fuel, ProtoForm Bodies & Futaba Radio Gear by Choice
Founding Member of CORRC .... 5280raceway
www.darksidems.com www.igthobbies.com www.IGT8.com
Grenade10 is offline   Reply With Quote
Old 03-17-2007, 08:01 PM   #24245
Tech Lord
 
protc3's Avatar
 
Join Date: Jun 2003
Location: Spring Hill,Florida
Posts: 10,813
Trader Rating: 13 (100%+)
Default

thanks bud.the corally seems pretty good.im sure the darkside 1/12th would work good outside also.i really enjoy running 19 turn 1/12th outside.cool thing is that i just went through my 19 turn motor stash and found a real stump puller.i cant wait to see what she does tommorow.
__________________
Jason Breiner
BMI Racing
Team Associated
J Concepts
protc3 is offline   Reply With Quote
Old 03-17-2007, 10:07 PM   #24246
Tech Master
 
David Galdo's Avatar
 
Join Date: Aug 2001
Location: Euless, TX
Posts: 1,652
Trader Rating: 15 (100%+)
Send a message via ICQ to David Galdo Send a message via AIM to David Galdo Send a message via MSN to David Galdo Send a message via Yahoo to David Galdo
Default

Quote:
Originally Posted by P2
Really

David Galdo,

I might need a 19T (komodo) for next weekend, can you pick one up for me and I'll buy it at the track.
I have one you can use.... but, first call Ron and see if he can meet you on your way up here. He lives right off I-35 south of Waco. There were some hot 19t KD's at the shop.
__________________
Hot Bodies | HPI Racing | HPI TV | Speedzone USA | Team Epic | Trinity | TRC
V-Dezign 4.0
David Galdo is offline   Reply With Quote
Old 03-17-2007, 10:12 PM   #24247
Tech Elite
 
wallyedmonds's Avatar
 
Join Date: Jul 2006
Location: Brampton ont canada
Posts: 3,662
Default

you guys dont run mod outside.
wallyedmonds is offline   Reply With Quote
Old 03-17-2007, 11:23 PM   #24248
Tech Elite
 
odpurple's Avatar
 
Join Date: Dec 2002
Location: San Francisco
Posts: 2,187
Default

Quote:
Originally Posted by smojoe
I prefer to use a lighter weight center shock oil to loose a few grams
Genius!
__________________
TOP Racing USA--OD Racing--Novak--Power Push--J Spec
odpurple is offline   Reply With Quote
Old 03-17-2007, 11:29 PM   #24249
Tech Champion
 
Join Date: Nov 2001
Location: Hawaii, USA
Posts: 7,157
Default

Quote:
Originally Posted by protc3
thanks bud.the corally seems pretty good.im sure the darkside 1/12th would work good outside also.i really enjoy running 19 turn 1/12th outside.cool thing is that i just went through my 19 turn motor stash and found a real stump puller.i cant wait to see what she does tommorow.
It does we run outdoors in a class open from stock to 19T where I run my Darkside. The track is rather small though so stocks seem about as fast as the tamiya 23T motors some of the other guys are running. I just told my LHS to order me a 19T...looking foward to seeing how that runs.
InspGadgt is offline   Reply With Quote
Old 03-18-2007, 03:53 AM   #24250
Tech Lord
 
protc3's Avatar
 
Join Date: Jun 2003
Location: Spring Hill,Florida
Posts: 10,813
Trader Rating: 13 (100%+)
Default

Quote:
Originally Posted by wallyedmonds
you guys dont run mod outside.
we do but our state series runs 19 turn only
__________________
Jason Breiner
BMI Racing
Team Associated
J Concepts
protc3 is offline   Reply With Quote
Old 03-18-2007, 03:54 AM   #24251
Tech Lord
 
protc3's Avatar
 
Join Date: Jun 2003
Location: Spring Hill,Florida
Posts: 10,813
Trader Rating: 13 (100%+)
Default

Quote:
Originally Posted by InspGadgt
It does we run outdoors in a class open from stock to 19T where I run my Darkside. The track is rather small though so stocks seem about as fast as the tamiya 23T motors some of the other guys are running. I just told my LHS to order me a 19T...looking foward to seeing how that runs.
cool
__________________
Jason Breiner
BMI Racing
Team Associated
J Concepts
protc3 is offline   Reply With Quote
Old 03-18-2007, 06:33 AM   #24252
Tech Fanatic
 
Michael.H's Avatar
 
Join Date: Jun 2005
Location: Perth, Australia
Posts: 990
Default

Well i have to say after running 1/12 at the states here in Perth Australia this weekend, i never want to go back to TC. A lot of fun and very fast.....
__________________
Synergy N9, OS91SZ-H, Hatori SB18, JR DS8711's, JR G770T, ATG, Arizona Reg.
T-Rex 600CF
T-Rex 450SE x2
RC12L4
FlightPower LiPo's all the way.
Michael.H is offline   Reply With Quote
Old 03-18-2007, 06:57 AM   #24253
Tech Regular
 
arr see car's Avatar
 
Join Date: Dec 2006
Location: West Ozzie living in Merrigum...Shepparton...Victoria
Posts: 426
Trader Rating: 13 (100%+)
Default

What is the best servo saver or do you have to change them regularly.
__________________
...Current Toys...
.....(: WIFE :)......
.MST MS-01D Pro.
....Axial Wraith....
.......... 😃 ..........
arr see car is offline   Reply With Quote
Old 03-18-2007, 07:12 AM   #24254
Tech Elite
 
RCSteve93's Avatar
 
Join Date: Dec 2005
Location: Long Island, New York
Posts: 4,603
Trader Rating: 11 (100%+)
Default

Quote:
Originally Posted by arr see car
What is the best servo saver or do you have to change them regularly.
I use Kimbrough servo savers.
__________________
rm -rf /windows
RCSteve93 is offline   Reply With Quote
Old 03-19-2007, 12:12 AM   #24255
Tech Fanatic
 
Michael.H's Avatar
 
Join Date: Jun 2005
Location: Perth, Australia
Posts: 990
Default

Quote:
Originally Posted by arr see car
What is the best servo saver or do you have to change them regularly.
Kimbrough here, so when are you getting the 12x........
__________________
Synergy N9, OS91SZ-H, Hatori SB18, JR DS8711's, JR G770T, ATG, Arizona Reg.
T-Rex 600CF
T-Rex 450SE x2
RC12L4
FlightPower LiPo's all the way.
Michael.H is offline   Reply With Quote
Reply

Similar Threads
Thread Thread Starter Forum Replies Last Post
New to the forum mig rod Electric Off-Road 1 01-05-2008 05:23 PM
hi i need help and im new to the forum racer4 Rookie Zone 4 01-21-2007 02:37 PM
Why is this forum listed under the On Road Forum? sport10 Onroad Nitro Engine Zone 0 01-11-2007 08:06 AM
Forum Changes... futureal Wisconsin & Illinois Racing 3 10-28-2002 09:26 PM



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off



All times are GMT -7. It is currently 12:01 AM.


Powered By: vBulletin v3.9.2.1
Privacy Policy | Terms of Use | Advertise Content © 2001-2011 RCTech.net

SEO by vBSEO 3.5.0