R/C Tech Forums

Go Back   R/C Tech Forums > General Forums > Electric On-Road

    Hide Wikipost
Old 10-28-2016, 12:43 PM   -   Wikipost
R/C Tech Forums Thread Wiki: 1/12 forum
Please read: This is a community-maintained wiki post containing the most important information from this thread. You may edit the Wiki once you have been a member for 90 days and have made 90 posts.
 
Last edit by: fenton06
This is a place to share knowledge related to 1/12th scale racing. It is not to be used for conversations.

KITS:
Click links to go to manufacturer product page. If any are missing please add them!

TIRES:
Pre-mounted tires readily available in the US:
Pre-mounted tires readily available in the Europe:
  • Hot Race ??

Gluing your own donuts:
https://www.youtube.com/watch?v=hm7z1rz-74s - Special thanks to Edward Pickering!
Truing tires:
https://www.youtube.com/watch?v=8wqHOLWq6Uc - Special thanks to Edward Pickering!

The following information came from HERE, with some editing and information added. Thanks Christian!

THIS MAY NEED UPDATING FOR THE NEW BLACK CRC CARPET

Brands:
BSR, CRC, Jaco:
Pro One is no longer selling to the public, but it and the brands above are all mounted by BSR and use the same foam. The nomenclature of the BSR vs Jaco/CRC is a little different in a few instances but is otherwise the same. The BSR foam consists of three families, and can be identifed as synthetics, naturals, and blends.

Synthetics - The old school, light weight, easy to true "dry feeling" tires. These include tires like CRC/Jaco Yellow (BSR White), Black, Gray, etc. These tires offer the highest wear rate and lowest grip. Many racers continue to use these nder high bite conditions.

Naturals - These tires are usually the best alternative for low bite and asphalt. They include Pink, Magenta, Double Pink, Lilac (BSR Team Purple), Purple, and other tires. These tires provide a ton of grip, but tend to get sticky in high bite conditions. This rubber does not wear as easily, and the cars will pick up gunk and fibers from the carpet under most high bite conditions. This is especially bad if the humidity is high.

Blends - These are the tires most people run today. They were initially called "JFT foam" by some, as it was believed that the tires were the same as the JFT tires. We can divide the blends further into two groups: high rubber and low rubber content. The high rubber would be the new rear Orange and Red from the BSR family, and the low rubber would be the Green and Blue varieties. When, asked about the difference, John Foister from BSR Tires said they came from the same "family" of foam, but they offered different grip. According to John, the Green/Blue has more bite than Orange/Red, but from track testing Oranges offer more bite than Green (being equivalent to in hardness) when the grip is high and absolutely no grip when it is lower. The Orange foam has a denser pore structure and the tire is not as prone to chunking. It is also important to note is that BSR Blue rears are not the same as the BSR Blue fronts!

JFT:
JFT stands for Japan Foam Tire. They started the new wave of foam tires we are all using now (Blue/Blu, Green/Greene, Dbl Blue, etc). These tires are a little different than the BSR tire family, but work in very similar conditions. They offers four varieties A (asphalt), C (carpet), S (???), and R (???). This does not mean that those types only work on that surface, but this is what they recommend.

JFT uses the same foam for fronts and rears if the color is the same.

A: Used on asphalt, considered close to the natural rubber variety and are named consistently with other natural tires.
C: Used on carpet, considered a blend.
S: Used on carpet?, tires are ???
R: Used on carpet?, tires are ???

For setup, the JFT foam seem to generate more bite than the BSR, therefore the car tends to be a little more aggressive.

Ulti:
Ulti is another Japanese brand that offers an array of compounds. They have their own way of rating tires, and are difficult to equate to other brands. They have 4 different varieties, each in varying degrees of hardness.

J: High rubber content tire, similar to Pink/ Magenta. Soft would be close to a pink. These offer the most bite and are great for asphalt/carpet front tire. (J hard being very popular)
X: "Balanced" blend, similar to JFT Blue/ Green. Soft is equivalent to Green, medium to Blue in hardness. Great for carpet!
Y: High synthetic blend with lower grip, and is not a very popular variety.
Z: A very expensive "special" foam that is supposed to be magic on asphalt. Only make it in soft shore.
European tires:
There are many great European foam tire brands that use their own types of foam, as well as traditional foams. SOmeone with more knowledge about them will need to fill this in!

Tire Diameter:
If you are racing on carpet, you have to evaluate how much grip your track has. If your track is low to medium grip, you can run bigger tires. If you are on higher bite you have to cut them smaller, there is simply no way around it. Bigger tires are needed for asphalt, especially in the rear. The larger tires provide much needed lateral bite.

Carpet (mm):
Low - Medium Bite
Front: 42.0 - 42.5
Rear: 42.5 - 43.00
Medium - High Bite
Front: 40.5 - 41.0
Rear: 41.5 - 42.0
Big Race
Front: 39.5 - 40.0
Rear: 40.5 - 41.0
Asphalt (mm):
Parking Lot
Front: 43.0 - 44.0
Rear: 44.0 - 45.0
Prepped High Bite
Front: 42.0 - 43.0
Rear: 43.0 - 44.0

Tire Saucing:
Most facilities have moved towards odorless traction additives such as SXT. Some of additives evaporate very quickly and some do not. This seems to be something that is also dependent on tire compound and ambient temperature. For example, saucing a Green compound seems like it never dries, especially when tjhe temperature is lower. We have found that wiping the tires off 15 minutes before we go run allows the sauce to cure, which makes the car come in much quicker with Green rears. Blue compounds on the other hand, do fine when wiped off right before hitting the track.

Saucing half front and full rear is a good initial starting point. If the front of the car is too agressive you can sauce les than half, or for a shorter amount of time.
Tire Fuzzing:
In conditions of increasing grip, foam tires will somewtimes get sticky and pick up fuzz and debris from the track. This is highly dependent on the rubber sedan tire that is being run at your local track and the compound/ type of foam you are running on you car. The softer the sedan tire and the harder/higher rubber content in your foam tire, trouble with fuzzing seems more likely to occur.

There are ways to get around fuzzing under most conditions, and usually involves the selection of the correct foam compound. The more fuzz you get, the softer/lower rubber content you want to run.

Examples:
Problem: Car fuzzes with Lilac/Team Purple fronts and car starts pushing.
Solution: Use a softer front tire and or different family of foam. Replace it with Blue or Double Blue front.

Problem: Car loses rear bite 6 minutes into the run. Blue rear tires look almost clean but have small carpet hairs.
Solution: Use Green rear tires. The softer compound wears instead of getting sticky, minimizing fuzz.

Tire Selection:
Starting out, pick 2 tire compounds for the front and rear. The following should have you covered 99% of the time.

Front - Green and Blue (BSR) or Green and Light Blue (JFT)
Rear - Blue and Double Blue (BSR) or Blue and Dark Blue (JFT)

You may wonder about other compounds out there and if they might be better, trust me, they probably won't be. Even if there are other tires that can be as fast, the synthetic family wears out really fast and the high natural rubber will probably fuzz on you over an 8 minute run. The blends family seems to be the most versatile foam type available today. They last awhile, and sticking to them will make your process of tire selection simpler.
Tire Charts:
BSR/CRC/Jaco



Contact



Corally



JFT (Japan Foam Tire)



Ulti



Enneti (Xceed)



ELECTRONICS:
ESC:
As of now, ROAR is staying 1S (3.7V nominal; 4.2V fully charged) for 1/12. There are many 1S ESC's with a built in BEC so nothing else is required to power the receiver and servo.

If you don't want to lock yourself into a 1S specific ESC, you do have other options! It is possible to use your 2S ESC without a booster or receiver pack, and the ESC simply supplies the lower voltage. If that does not appeal to you, you will need to use an Rx pack or booster. The Rx pack and booster will both supply the receiver with a higher voltage than the 1S pack.

If you decide to use an Rx pack, MAKE SURE TO REMOVE THE RED WIRE FROM THE ESC PLUG THAT GOES INTO THE RECEIVER!!!

If you choose to use a voltage booster, it works exactly how it sounds. Instead of plugging the ESC into the receiver, it plugs into the booster, and the booster plug goes to the ESC, supplying the higher voltage.

1S ESC:
If there are any missing please add them!!

If anyone would like a need for a chart comparing the ESC's specs PM fenton06 and I'll get one made and put in here!
Voltage Boosters:
If there are any missing please add them!
Servos:
BODIES:
Black Art (CRC - US Dist):
  • Audi R8C - BA002 - .020 Thick



  • Black Market (Mohawk 12) - BA005 - .020



  • Lola B10 - BA006 - .020 thick
  • Toyota TS030 - BA008 - .020 thick

    Lola - black/red, TS030 - green/pink


PROTOForm:

Reflex Racing/RSD:

SUSPENSION ADJUSTMENTS:

Print Wikipost

Reply
 
Thread Tools Search this Thread
Old 01-30-2007, 08:35 PM   #23461
Tech Elite
 
Bob-Stormer's Avatar
 
Join Date: Dec 2001
Location: Glasgow, Montana USA
Posts: 3,512
Trader Rating: 8 (100%+)
Default

Now that we've established (via carbon dating techinques) how old he is, I've been meaning to mention this MRP thing before. I'm looking at my old MRP car and I'm noticing something oddly familar about the steering system. Something oddly familiar on the slapmaster car.

The more things change, the more they stay the same.

Whatever happend to Guy Davies?
Attached Thumbnails
1/12 forum-mrp_12th.jpg   1/12 forum-steering.jpg  
__________________
www.stormerhobbies.com "Where the world shops for radio control."
www.facebook.com/stormerhobbies
www.twitter.com/stormerhobbies

looking for....vintage 1/10-1/12 pan, need Schumacher 1/12th cars and parts.
Bob-Stormer is offline   Reply With Quote
Old 01-30-2007, 08:52 PM   #23462
Tech Elite
 
Slapmaster6000's Avatar
 
Join Date: Sep 2004
Location: Edmonds, Wash.
Posts: 2,947
Trader Rating: 14 (100%+)
Default

Oh man.... spoiled again.

I will have to hobble up some z bend wire for old times sake. I am having a strange sensation to zip tie something.

I forgot how bad those front tires were. The bushing would get all loosened up and the front tire would be all wobbly when you went by. You either had +3 camber or -3 depending which turn you were in.

Guy Davies is a name from the past. At some point he was on a motor cycle racing circuit and then later bacame involved with an auto dealership. Haven't heard anything from him in 10 years.
__________________
Stay dialed my friends!
www.slapmastertools.com
Team Roche USA
Team Orca orcharc.com
Slapmaster6000 is offline   Reply With Quote
Old 01-30-2007, 09:07 PM   #23463
Tech Elite
 
Bob-Stormer's Avatar
 
Join Date: Dec 2001
Location: Glasgow, Montana USA
Posts: 3,512
Trader Rating: 8 (100%+)
Default

Quote:
Originally Posted by Slapmaster6000
Guy Davies is a name from the past. At some point he was on a motor cycle racing circuit and then later bacame involved with an auto dealership. Haven't heard anything from him in 10 years.
I offered the guy a job in I think 1988-1990. He and Jim Welch were campaining the Shotgun car at the time. They came over to Spokane quite a bit back in the day. See them at the Hank, or in Deerpark at Dusty Eckharts place, "Dirt Power Hobbies".

it's the good old days for sure.
__________________
www.stormerhobbies.com "Where the world shops for radio control."
www.facebook.com/stormerhobbies
www.twitter.com/stormerhobbies

looking for....vintage 1/10-1/12 pan, need Schumacher 1/12th cars and parts.
Bob-Stormer is offline   Reply With Quote
Old 01-30-2007, 09:14 PM   #23464
Tech Initiate
 
Racing Beaver's Avatar
 
Join Date: Jan 2007
Posts: 20
Default

i think ill talk about the traxxas jato in this thread.
Racing Beaver is offline   Reply With Quote
Old 01-30-2007, 09:14 PM   #23465
Tech Elite
 
Grenade10's Avatar
 
Join Date: Nov 2003
Location: Fort Collins, Colorado
Posts: 4,667
Trader Rating: 37 (100%+)
Default

Quote:
Originally Posted by Scottrik
Those of us who were there prefer to think of it as "you're young".
Or that "you have not gained enough experience yet"!!

You got to watch us sneaky "Old Guys" and yes I'm one of them!!
__________________
Darkside, Sweep, BSR, Fantom, IGT Hobbies and IGT8
Byrons Fuel, ProtoForm Bodies & Futaba Radio Gear by Choice
Founding Member of CORRC .... 5280raceway
www.darksidems.com www.igthobbies.com www.IGT8.com
Grenade10 is offline   Reply With Quote
Old 01-30-2007, 09:15 PM   #23466
Tech Initiate
 
Racing Beaver's Avatar
 
Join Date: Jan 2007
Posts: 20
Default

anyone here own a JATO?
Racing Beaver is offline   Reply With Quote
Old 01-30-2007, 09:16 PM   #23467
Tech Initiate
 
Racing Beaver's Avatar
 
Join Date: Jan 2007
Posts: 20
Default

its an awesme truck but theres very little support....
Racing Beaver is offline   Reply With Quote
Old 01-30-2007, 09:18 PM   #23468
Tech Initiate
 
Racing Beaver's Avatar
 
Join Date: Jan 2007
Posts: 20
Default

seriously i cant find tires anywhere....
Racing Beaver is offline   Reply With Quote
Old 01-30-2007, 09:19 PM   #23469
Tech Initiate
 
Racing Beaver's Avatar
 
Join Date: Jan 2007
Posts: 20
Default

i like everything about it... if only it were race legal
Racing Beaver is offline   Reply With Quote
Old 01-30-2007, 09:21 PM   #23470
Tech Initiate
 
Racing Beaver's Avatar
 
Join Date: Jan 2007
Posts: 20
Default

seriouly i think its a great truck with no support at all
Racing Beaver is offline   Reply With Quote
Old 01-30-2007, 09:29 PM   #23471
Tech Champion
 
Scottrik's Avatar
 
Join Date: Sep 2004
Location: Billings, MT
Posts: 6,122
Trader Rating: 238 (100%+)
Default

Quote:
Originally Posted by Racing Beaver
seriouly i think its a great truck with no support at all
Kinda like your brain? I'm sure if the operation manual were still available you'd have ordered one up so you could figure out how to turn it on. Unfortunately, absent that you are compelled to come post ot drivel in a COMPLETELY unrelated forum and miss "clues" that was the case.
__________________
Congressmen should wear uniforms like NASCAR drivers so we can identify their corporate sponsors.

THE REVOLUTION WILL NOT BE TELEVISED -Gil Scott-Heron (1949-2011)
Scottrik is offline   Reply With Quote
Old 01-30-2007, 09:34 PM   #23472
Tech Champion
 
Scottrik's Avatar
 
Join Date: Sep 2004
Location: Billings, MT
Posts: 6,122
Trader Rating: 238 (100%+)
Default

Guy Davies sold me my very first RC car at Hobby Hut--gold tub RC 10 w/ original Zeta speed control (remember Del Flagg?) to race at the old Renton club over by Stoneway where the water park is now. Didn't know he'd gone bike racing tho. Pete Neilsen (same crew) did the bike racing thing for a while--I raced slot cars with him the last couple years I was in Seattle. He probably has some idea as to Guy's whereabout.
__________________
Congressmen should wear uniforms like NASCAR drivers so we can identify their corporate sponsors.

THE REVOLUTION WILL NOT BE TELEVISED -Gil Scott-Heron (1949-2011)
Scottrik is offline   Reply With Quote
Old 01-30-2007, 10:10 PM   #23473
Tech Regular
 
Join Date: Feb 2003
Posts: 285
Default

Quote:
Originally Posted by Slapmaster6000
Was it the Actor?

I am finding that my some of my tools are older then most of the guys I race with. I have a Delta tweak board that does 1/12,1/10 & 1/8th scale cars that might be pushing 17 years. It's awesome! I tell guys you can't get this one anymore. In a pinch, you put it under the truck seat on Friday nights.

Old!!! You just need to catch up.
Did you get that from Dave Clark?
jrrc is offline   Reply With Quote
Old 01-30-2007, 10:25 PM   #23474
Tech Elite
 
Bob-Stormer's Avatar
 
Join Date: Dec 2001
Location: Glasgow, Montana USA
Posts: 3,512
Trader Rating: 8 (100%+)
Default

Quote:
Originally Posted by jrrc
Did you get that from Dave Clark?
Dave Clark, ...Dave Clark... why does that name ring a bell?

Funny how people you know, know people you know...
__________________
www.stormerhobbies.com "Where the world shops for radio control."
www.facebook.com/stormerhobbies
www.twitter.com/stormerhobbies

looking for....vintage 1/10-1/12 pan, need Schumacher 1/12th cars and parts.
Bob-Stormer is offline   Reply With Quote
Old 01-30-2007, 10:35 PM   #23475
Tech Champion
 
Scottrik's Avatar
 
Join Date: Sep 2004
Location: Billings, MT
Posts: 6,122
Trader Rating: 238 (100%+)
Default

Dave was one of the crusty ol' SARCAR originals. My understanding is he retired from driving (for about the tenth time) a couple years ago but still may be active trying to find SARCAR a home. Did Terry Varner let 1/8 slide for good when he got his Hardley-Ableson 15 years ago?
__________________
Congressmen should wear uniforms like NASCAR drivers so we can identify their corporate sponsors.

THE REVOLUTION WILL NOT BE TELEVISED -Gil Scott-Heron (1949-2011)
Scottrik is offline   Reply With Quote
Reply

Similar Threads
Thread Thread Starter Forum Replies Last Post
New to the forum mig rod Electric Off-Road 1 01-05-2008 05:23 PM
hi i need help and im new to the forum racer4 Rookie Zone 4 01-21-2007 02:37 PM
Why is this forum listed under the On Road Forum? sport10 Onroad Nitro Engine Zone 0 01-11-2007 08:06 AM
Forum Changes... futureal Wisconsin & Illinois Racing 3 10-28-2002 09:26 PM



Currently Active Users Viewing This Thread: 7 (1 members and 6 guests)
TOADYY
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off



All times are GMT -7. It is currently 09:30 PM.


Powered By: vBulletin v3.9.2.1
Privacy Policy | Terms of Use | Advertise Content © 2001-2011 RCTech.net

SEO by vBSEO 3.5.0