R/C Tech Forums

Go Back   R/C Tech Forums > General Forums > Electric On-Road

    Hide Wikipost
Old 10-28-2016, 12:43 PM   -   Wikipost
R/C Tech Forums Thread Wiki: 1/12 forum
Please read: This is a community-maintained wiki post containing the most important information from this thread. You may edit the Wiki once you have been a member for 90 days and have made 90 posts.
 
Last edit by: fenton06
This is a place to share knowledge related to 1/12th scale racing. It is not to be used for conversations.

KITS:
Click links to go to manufacturer product page. If any are missing please add them!

TIRES:
Pre-mounted tires readily available in the US:
Pre-mounted tires readily available in the Europe:
  • Hot Race ??

Gluing your own donuts:
https://www.youtube.com/watch?v=hm7z1rz-74s - Special thanks to Edward Pickering!
Truing tires:
https://www.youtube.com/watch?v=8wqHOLWq6Uc - Special thanks to Edward Pickering!

The following information came from HERE, with some editing and information added. Thanks Christian!

THIS MAY NEED UPDATING FOR THE NEW BLACK CRC CARPET

Brands:
BSR, CRC, Jaco:
Pro One is no longer selling to the public, but it and the brands above are all mounted by BSR and use the same foam. The nomenclature of the BSR vs Jaco/CRC is a little different in a few instances but is otherwise the same. The BSR foam consists of three families, and can be identifed as synthetics, naturals, and blends.

Synthetics - The old school, light weight, easy to true "dry feeling" tires. These include tires like CRC/Jaco Yellow (BSR White), Black, Gray, etc. These tires offer the highest wear rate and lowest grip. Many racers continue to use these nder high bite conditions.

Naturals - These tires are usually the best alternative for low bite and asphalt. They include Pink, Magenta, Double Pink, Lilac (BSR Team Purple), Purple, and other tires. These tires provide a ton of grip, but tend to get sticky in high bite conditions. This rubber does not wear as easily, and the cars will pick up gunk and fibers from the carpet under most high bite conditions. This is especially bad if the humidity is high.

Blends - These are the tires most people run today. They were initially called "JFT foam" by some, as it was believed that the tires were the same as the JFT tires. We can divide the blends further into two groups: high rubber and low rubber content. The high rubber would be the new rear Orange and Red from the BSR family, and the low rubber would be the Green and Blue varieties. When, asked about the difference, John Foister from BSR Tires said they came from the same "family" of foam, but they offered different grip. According to John, the Green/Blue has more bite than Orange/Red, but from track testing Oranges offer more bite than Green (being equivalent to in hardness) when the grip is high and absolutely no grip when it is lower. The Orange foam has a denser pore structure and the tire is not as prone to chunking. It is also important to note is that BSR Blue rears are not the same as the BSR Blue fronts!

JFT:
JFT stands for Japan Foam Tire. They started the new wave of foam tires we are all using now (Blue/Blu, Green/Greene, Dbl Blue, etc). These tires are a little different than the BSR tire family, but work in very similar conditions. They offers four varieties A (asphalt), C (carpet), S (???), and R (???). This does not mean that those types only work on that surface, but this is what they recommend.

JFT uses the same foam for fronts and rears if the color is the same.

A: Used on asphalt, considered close to the natural rubber variety and are named consistently with other natural tires.
C: Used on carpet, considered a blend.
S: Used on carpet?, tires are ???
R: Used on carpet?, tires are ???

For setup, the JFT foam seem to generate more bite than the BSR, therefore the car tends to be a little more aggressive.

Ulti:
Ulti is another Japanese brand that offers an array of compounds. They have their own way of rating tires, and are difficult to equate to other brands. They have 4 different varieties, each in varying degrees of hardness.

J: High rubber content tire, similar to Pink/ Magenta. Soft would be close to a pink. These offer the most bite and are great for asphalt/carpet front tire. (J hard being very popular)
X: "Balanced" blend, similar to JFT Blue/ Green. Soft is equivalent to Green, medium to Blue in hardness. Great for carpet!
Y: High synthetic blend with lower grip, and is not a very popular variety.
Z: A very expensive "special" foam that is supposed to be magic on asphalt. Only make it in soft shore.
European tires:
There are many great European foam tire brands that use their own types of foam, as well as traditional foams. SOmeone with more knowledge about them will need to fill this in!

Tire Diameter:
If you are racing on carpet, you have to evaluate how much grip your track has. If your track is low to medium grip, you can run bigger tires. If you are on higher bite you have to cut them smaller, there is simply no way around it. Bigger tires are needed for asphalt, especially in the rear. The larger tires provide much needed lateral bite.

Carpet (mm):
Low - Medium Bite
Front: 42.0 - 42.5
Rear: 42.5 - 43.00
Medium - High Bite
Front: 40.5 - 41.0
Rear: 41.5 - 42.0
Big Race
Front: 39.5 - 40.0
Rear: 40.5 - 41.0
Asphalt (mm):
Parking Lot
Front: 43.0 - 44.0
Rear: 44.0 - 45.0
Prepped High Bite
Front: 42.0 - 43.0
Rear: 43.0 - 44.0

Tire Saucing:
Most facilities have moved towards odorless traction additives such as SXT. Some of additives evaporate very quickly and some do not. This seems to be something that is also dependent on tire compound and ambient temperature. For example, saucing a Green compound seems like it never dries, especially when tjhe temperature is lower. We have found that wiping the tires off 15 minutes before we go run allows the sauce to cure, which makes the car come in much quicker with Green rears. Blue compounds on the other hand, do fine when wiped off right before hitting the track.

Saucing half front and full rear is a good initial starting point. If the front of the car is too agressive you can sauce les than half, or for a shorter amount of time.
Tire Fuzzing:
In conditions of increasing grip, foam tires will somewtimes get sticky and pick up fuzz and debris from the track. This is highly dependent on the rubber sedan tire that is being run at your local track and the compound/ type of foam you are running on you car. The softer the sedan tire and the harder/higher rubber content in your foam tire, trouble with fuzzing seems more likely to occur.

There are ways to get around fuzzing under most conditions, and usually involves the selection of the correct foam compound. The more fuzz you get, the softer/lower rubber content you want to run.

Examples:
Problem: Car fuzzes with Lilac/Team Purple fronts and car starts pushing.
Solution: Use a softer front tire and or different family of foam. Replace it with Blue or Double Blue front.

Problem: Car loses rear bite 6 minutes into the run. Blue rear tires look almost clean but have small carpet hairs.
Solution: Use Green rear tires. The softer compound wears instead of getting sticky, minimizing fuzz.

Tire Selection:
Starting out, pick 2 tire compounds for the front and rear. The following should have you covered 99% of the time.

Front - Green and Blue (BSR) or Green and Light Blue (JFT)
Rear - Blue and Double Blue (BSR) or Blue and Dark Blue (JFT)

You may wonder about other compounds out there and if they might be better, trust me, they probably won't be. Even if there are other tires that can be as fast, the synthetic family wears out really fast and the high natural rubber will probably fuzz on you over an 8 minute run. The blends family seems to be the most versatile foam type available today. They last awhile, and sticking to them will make your process of tire selection simpler.
Tire Charts:
BSR/CRC/Jaco



Contact



Corally



JFT (Japan Foam Tire)



Ulti



Enneti (Xceed)



ELECTRONICS:
ESC:
As of now, ROAR is staying 1S (3.7V nominal; 4.2V fully charged) for 1/12. There are many 1S ESC's with a built in BEC so nothing else is required to power the receiver and servo.

If you don't want to lock yourself into a 1S specific ESC, you do have other options! It is possible to use your 2S ESC without a booster or receiver pack, and the ESC simply supplies the lower voltage. If that does not appeal to you, you will need to use an Rx pack or booster. The Rx pack and booster will both supply the receiver with a higher voltage than the 1S pack.

If you decide to use an Rx pack, MAKE SURE TO REMOVE THE RED WIRE FROM THE ESC PLUG THAT GOES INTO THE RECEIVER!!!

If you choose to use a voltage booster, it works exactly how it sounds. Instead of plugging the ESC into the receiver, it plugs into the booster, and the booster plug goes to the ESC, supplying the higher voltage.

1S ESC:
If there are any missing please add them!!

If anyone would like a need for a chart comparing the ESC's specs PM fenton06 and I'll get one made and put in here!
Voltage Boosters:
If there are any missing please add them!
Servos:
BODIES:
Black Art (CRC - US Dist):
  • Audi R8C - BA002 - .020 Thick



  • Black Market (Mohawk 12) - BA005 - .020



  • Lola B10 - BA006 - .020 thick
  • Toyota TS030 - BA008 - .020 thick

    Lola - black/red, TS030 - green/pink


PROTOForm:

Reflex Racing/RSD:

SUSPENSION ADJUSTMENTS:

Print Wikipost

Reply
 
Thread Tools Search this Thread
Old 12-27-2006, 01:50 PM   #22861
Tech Elite
 
odpurple's Avatar
 
Join Date: Dec 2002
Location: San Francisco
Posts: 2,187
Default

Quote:
Originally Posted by protc3
do you have any WC cells you could weigh?i would be interested to see if they are reshrunk 4500's.that always seems to be how the new cells are introduced
Those were all SHVs. I have some WCs coming, I'll weigh them and post the results.
__________________
TOP Racing USA--OD Racing--Novak--Power Push--J Spec
odpurple is offline   Reply With Quote
Old 12-27-2006, 03:19 PM   #22862
Tech Elite
 
chris moore's Avatar
 
Join Date: Mar 2004
Location: Phx AZ
Posts: 3,660
Trader Rating: 85 (99%+)
Default

Quote:
do you have any WC cells you could weigh?i would be interested to see if they are reshrunk 4500's.that always seems to be how the new cells are introduced
I have two sets of WC cells but no way to weigh them for you . From the performance you could be right about them being 4500's, all the cells have great numbers; 1.240+ and IR's of .1 to .09

Chris
chris moore is offline   Reply With Quote
Old 12-27-2006, 03:21 PM   #22863
Tech Lord
 
protc3's Avatar
 
Join Date: Jun 2003
Location: Spring Hill,Florida
Posts: 10,813
Trader Rating: 13 (100%+)
Default

thats what im talking about.when 3800 cells came out they were pretty good then right before 4200's came out,the 3800's started getting extremely good.i wonder if this is how they start the introduction of the new cells
__________________
Jason Breiner
BMI Racing
Team Associated
J Concepts
protc3 is offline   Reply With Quote
Old 12-27-2006, 05:28 PM   #22864
Tech Addict
 
Join Date: May 2005
Location: California
Posts: 605
Trader Rating: 2 (100%+)
Default

what sort of gearing should I start with using a 13.5BL motor and 1.78" tires? 90-ish foot back straight.
__________________
www.freerice.com
Help hungry people while learning.
smojoe is offline   Reply With Quote
Old 12-27-2006, 05:33 PM   #22865
Super Moderator
 
Marcos.J's Avatar
R/C Tech Elite Subscriber
 
Join Date: Sep 2003
Location: Semper Fi
Posts: 25,177
Trader Rating: 140 (100%+)
Default

Quote:
Originally Posted by smojoe
what sort of gearing should I start with using a 13.5BL motor and 1.78" tires? 90-ish foot back straight.
i ran my 13.5 with 39/83 with a 46mm tire for a 67.90mm roll out, i would start with a 64mm and go from there , the motor likes alot of gear
Marcos.J is offline   Reply With Quote
Old 12-27-2006, 06:16 PM   #22866
Tech Elite
 
RED-LINE M03's Avatar
 
Join Date: Jun 2005
Location: >>> USA <<<
Posts: 4,102
Trader Rating: 127 (100%+)
Default Just an FYI

Just an F.Y.I. guys I have a ton of Red and Green Trinity springs 4-sale. These seem like the most popular spring combo's for 12th scale motor building.


Link to sale:

Brushes and Spring Blow Out !!!!!!!!


Regards,
Eric

Last edited by RED-LINE M03; 12-27-2006 at 06:17 PM. Reason: .
RED-LINE M03 is offline   Reply With Quote
Old 12-27-2006, 07:45 PM   #22867
Tech Fanatic
 
fast-ho-cars's Avatar
 
Join Date: Sep 2003
Location: it's a dry heat
Posts: 781
Default

Quote:
Originally Posted by smojoe
what sort of gearing should I start with using a 13.5BL motor and 1.78" tires? 90-ish foot back straight.
i have seen some posts in other threads on Rctech. there are mentions of having to and being able to gear them TALL to the point where the 88T/64P gear is not a small enough spur for the size pinion the 13.5 needs to hit the sweet spot. rear pod space is a issue. some have found places to get New Old Stock 64 pitch spurs that Robinson racing made. i think in the 68 to 70 something tooth range
fast-ho-cars is offline   Reply With Quote
Old 12-27-2006, 07:57 PM   #22868
Tech Elite
 
dr_hfuhuhurr's Avatar
 
Join Date: Aug 2003
Location: Westchester, NY
Posts: 4,422
Trader Rating: 69 (100%+)
Default

PRS? You guys out there...make us some small spurs?
__________________
"There is a fine line between hobby and mental illness. Which side are you on?"

“Life is hard; it's harder if you're stupid.” - John Wayne
dr_hfuhuhurr is offline   Reply With Quote
Old 12-28-2006, 03:08 AM   #22869
Tech Addict
 
fraz's Avatar
 
Join Date: Mar 2002
Location: Santa Cruz, CA
Posts: 653
Send a message via AIM to fraz
Default

Quote:
Originally Posted by fast-ho-cars
i have seen some posts in other threads on Rctech. there are mentions of having to and being able to gear them TALL to the point where the 88T/64P gear is not a small enough spur for the size pinion the 13.5 needs to hit the sweet spot. rear pod space is a issue. some have found places to get New Old Stock 64 pitch spurs that Robinson racing made. i think in the 68 to 70 something tooth range
I consider Stockton to be good sized for a carpet track and you can nail the spot with an 88t. It is tight, but doable. With good batts I can gear it tall enough to start dumping prematurely and get the motor temp up fairly high (still not BR hot). Now if you start cutting real small tires (45mm and less) I can see where it would be an issue.
fraz is offline   Reply With Quote
Old 12-28-2006, 03:38 AM   #22870
Tech Addict
 
radio_car_racer's Avatar
 
Join Date: Apr 2004
Posts: 543
Trader Rating: 1 (100%+)
Default RC12 L4

battery placement

are there any hop-up battery trays out there to fit the L4 chassis to allow finer adjustment for battery placement. (Kit items only allow 2 positions.)
radio_car_racer is offline   Reply With Quote
Old 12-28-2006, 12:02 PM   #22871
Tech Lord
 
protc3's Avatar
 
Join Date: Jun 2003
Location: Spring Hill,Florida
Posts: 10,813
Trader Rating: 13 (100%+)
Default

i havent seen any around.however,on that car i always try to run the batteries as far back as possible
__________________
Jason Breiner
BMI Racing
Team Associated
J Concepts
protc3 is offline   Reply With Quote
Old 12-28-2006, 06:16 PM   #22872
Tech Elite
 
Join Date: Oct 2002
Location: Mclean, VA
Posts: 3,940
Trader Rating: 45 (100%+)
Default

For the guys who use the Team Orion V2 for 1:12, what is your brush and spring setup?
Apex is offline   Reply With Quote
Old 12-28-2006, 09:25 PM   #22873
Tech Master
 
CarlosG.'s Avatar
 
Join Date: Jul 2004
Location: Falls City,TX
Posts: 1,145
Trader Rating: 12 (100%+)
Send a message via Yahoo to CarlosG.
Default

Quote:
Originally Posted by Apex
For the guys who use the Team Orion V2 for 1:12, what is your brush and spring setup?

I have used the enduro brushes with the soft springs and 10 degrees of timing.
CarlosG. is offline   Reply With Quote
Old 12-29-2006, 12:53 AM   #22874
Tech Addict
 
James35's Avatar
 
Join Date: Nov 2005
Location: Rochester, New York
Posts: 748
Trader Rating: 1 (100%+)
Default



People keep asking me through private messages about this bumper. Here is the info:
It is a Hyperdrive HP-1127. Picked it up at RC4Less, but I can't find any more.
The 2 front screws are designed for 8-32 screws, so I drilled another through the bumper and used a triangle effect to keep it tight. I dremmeled out some for the transponder too. I did all the modifications to the bumper.
James35 is offline   Reply With Quote
Old 12-29-2006, 06:06 AM   #22875
Tech Elite
 
wallyedmonds's Avatar
 
Join Date: Jul 2006
Location: Brampton ont canada
Posts: 3,662
Default

Quote:
Originally Posted by radio_car_racer
battery placement

are there any hop-up battery trays out there to fit the L4 chassis to allow finer adjustment for battery placement. (Kit items only allow 2 positions.)
this is really all you need and you may find that you will like it forward.
wallyedmonds is offline   Reply With Quote
Reply

Similar Threads
Thread Thread Starter Forum Replies Last Post
New to the forum mig rod Electric Off-Road 1 01-05-2008 05:23 PM
hi i need help and im new to the forum racer4 Rookie Zone 4 01-21-2007 02:37 PM
Why is this forum listed under the On Road Forum? sport10 Onroad Nitro Engine Zone 0 01-11-2007 08:06 AM
Forum Changes... futureal Wisconsin & Illinois Racing 3 10-28-2002 09:26 PM



Currently Active Users Viewing This Thread: 2 (0 members and 2 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off



All times are GMT -7. It is currently 07:50 PM.


Powered By: vBulletin v3.9.2.1
Privacy Policy | Terms of Use | Advertise Content © 2001-2011 RCTech.net

SEO by vBSEO 3.5.0