R/C Tech Forums

Go Back   R/C Tech Forums > General Forums > Electric On-Road

    Hide Wikipost
Old 10-28-2016, 12:43 PM   -   Wikipost
R/C Tech Forums Thread Wiki: 1/12 forum
Please read: This is a community-maintained wiki post containing the most important information from this thread. You may edit the Wiki once you have been a member for 90 days and have made 90 posts.
 
Last edit by: fenton06
This is a place to share knowledge related to 1/12th scale racing. It is not to be used for conversations.

KITS:
Click links to go to manufacturer product page. If any are missing please add them!

TIRES:
Pre-mounted tires readily available in the US:
Pre-mounted tires readily available in the Europe:
  • Hot Race ??

Gluing your own donuts:
https://www.youtube.com/watch?v=hm7z1rz-74s - Special thanks to Edward Pickering!
Truing tires:
https://www.youtube.com/watch?v=8wqHOLWq6Uc - Special thanks to Edward Pickering!

The following information came from HERE, with some editing and information added. Thanks Christian!

THIS MAY NEED UPDATING FOR THE NEW BLACK CRC CARPET

Brands:
BSR, CRC, Jaco:
Pro One is no longer selling to the public, but it and the brands above are all mounted by BSR and use the same foam. The nomenclature of the BSR vs Jaco/CRC is a little different in a few instances but is otherwise the same. The BSR foam consists of three families, and can be identifed as synthetics, naturals, and blends.

Synthetics - The old school, light weight, easy to true "dry feeling" tires. These include tires like CRC/Jaco Yellow (BSR White), Black, Gray, etc. These tires offer the highest wear rate and lowest grip. Many racers continue to use these nder high bite conditions.

Naturals - These tires are usually the best alternative for low bite and asphalt. They include Pink, Magenta, Double Pink, Lilac (BSR Team Purple), Purple, and other tires. These tires provide a ton of grip, but tend to get sticky in high bite conditions. This rubber does not wear as easily, and the cars will pick up gunk and fibers from the carpet under most high bite conditions. This is especially bad if the humidity is high.

Blends - These are the tires most people run today. They were initially called "JFT foam" by some, as it was believed that the tires were the same as the JFT tires. We can divide the blends further into two groups: high rubber and low rubber content. The high rubber would be the new rear Orange and Red from the BSR family, and the low rubber would be the Green and Blue varieties. When, asked about the difference, John Foister from BSR Tires said they came from the same "family" of foam, but they offered different grip. According to John, the Green/Blue has more bite than Orange/Red, but from track testing Oranges offer more bite than Green (being equivalent to in hardness) when the grip is high and absolutely no grip when it is lower. The Orange foam has a denser pore structure and the tire is not as prone to chunking. It is also important to note is that BSR Blue rears are not the same as the BSR Blue fronts!

JFT:
JFT stands for Japan Foam Tire. They started the new wave of foam tires we are all using now (Blue/Blu, Green/Greene, Dbl Blue, etc). These tires are a little different than the BSR tire family, but work in very similar conditions. They offers four varieties A (asphalt), C (carpet), S (???), and R (???). This does not mean that those types only work on that surface, but this is what they recommend.

JFT uses the same foam for fronts and rears if the color is the same.

A: Used on asphalt, considered close to the natural rubber variety and are named consistently with other natural tires.
C: Used on carpet, considered a blend.
S: Used on carpet?, tires are ???
R: Used on carpet?, tires are ???

For setup, the JFT foam seem to generate more bite than the BSR, therefore the car tends to be a little more aggressive.

Ulti:
Ulti is another Japanese brand that offers an array of compounds. They have their own way of rating tires, and are difficult to equate to other brands. They have 4 different varieties, each in varying degrees of hardness.

J: High rubber content tire, similar to Pink/ Magenta. Soft would be close to a pink. These offer the most bite and are great for asphalt/carpet front tire. (J hard being very popular)
X: "Balanced" blend, similar to JFT Blue/ Green. Soft is equivalent to Green, medium to Blue in hardness. Great for carpet!
Y: High synthetic blend with lower grip, and is not a very popular variety.
Z: A very expensive "special" foam that is supposed to be magic on asphalt. Only make it in soft shore.
European tires:
There are many great European foam tire brands that use their own types of foam, as well as traditional foams. SOmeone with more knowledge about them will need to fill this in!

Tire Diameter:
If you are racing on carpet, you have to evaluate how much grip your track has. If your track is low to medium grip, you can run bigger tires. If you are on higher bite you have to cut them smaller, there is simply no way around it. Bigger tires are needed for asphalt, especially in the rear. The larger tires provide much needed lateral bite.

Carpet (mm):
Low - Medium Bite
Front: 42.0 - 42.5
Rear: 42.5 - 43.00
Medium - High Bite
Front: 40.5 - 41.0
Rear: 41.5 - 42.0
Big Race
Front: 39.5 - 40.0
Rear: 40.5 - 41.0
Asphalt (mm):
Parking Lot
Front: 43.0 - 44.0
Rear: 44.0 - 45.0
Prepped High Bite
Front: 42.0 - 43.0
Rear: 43.0 - 44.0

Tire Saucing:
Most facilities have moved towards odorless traction additives such as SXT. Some of additives evaporate very quickly and some do not. This seems to be something that is also dependent on tire compound and ambient temperature. For example, saucing a Green compound seems like it never dries, especially when tjhe temperature is lower. We have found that wiping the tires off 15 minutes before we go run allows the sauce to cure, which makes the car come in much quicker with Green rears. Blue compounds on the other hand, do fine when wiped off right before hitting the track.

Saucing half front and full rear is a good initial starting point. If the front of the car is too agressive you can sauce les than half, or for a shorter amount of time.
Tire Fuzzing:
In conditions of increasing grip, foam tires will somewtimes get sticky and pick up fuzz and debris from the track. This is highly dependent on the rubber sedan tire that is being run at your local track and the compound/ type of foam you are running on you car. The softer the sedan tire and the harder/higher rubber content in your foam tire, trouble with fuzzing seems more likely to occur.

There are ways to get around fuzzing under most conditions, and usually involves the selection of the correct foam compound. The more fuzz you get, the softer/lower rubber content you want to run.

Examples:
Problem: Car fuzzes with Lilac/Team Purple fronts and car starts pushing.
Solution: Use a softer front tire and or different family of foam. Replace it with Blue or Double Blue front.

Problem: Car loses rear bite 6 minutes into the run. Blue rear tires look almost clean but have small carpet hairs.
Solution: Use Green rear tires. The softer compound wears instead of getting sticky, minimizing fuzz.

Tire Selection:
Starting out, pick 2 tire compounds for the front and rear. The following should have you covered 99% of the time.

Front - Green and Blue (BSR) or Green and Light Blue (JFT)
Rear - Blue and Double Blue (BSR) or Blue and Dark Blue (JFT)

You may wonder about other compounds out there and if they might be better, trust me, they probably won't be. Even if there are other tires that can be as fast, the synthetic family wears out really fast and the high natural rubber will probably fuzz on you over an 8 minute run. The blends family seems to be the most versatile foam type available today. They last awhile, and sticking to them will make your process of tire selection simpler.
Tire Charts:
BSR/CRC/Jaco



Contact



Corally



JFT (Japan Foam Tire)



Ulti



Enneti (Xceed)



ELECTRONICS:
ESC:
As of now, ROAR is staying 1S (3.7V nominal; 4.2V fully charged) for 1/12. There are many 1S ESC's with a built in BEC so nothing else is required to power the receiver and servo.

If you don't want to lock yourself into a 1S specific ESC, you do have other options! It is possible to use your 2S ESC without a booster or receiver pack, and the ESC simply supplies the lower voltage. If that does not appeal to you, you will need to use an Rx pack or booster. The Rx pack and booster will both supply the receiver with a higher voltage than the 1S pack.

If you decide to use an Rx pack, MAKE SURE TO REMOVE THE RED WIRE FROM THE ESC PLUG THAT GOES INTO THE RECEIVER!!!

If you choose to use a voltage booster, it works exactly how it sounds. Instead of plugging the ESC into the receiver, it plugs into the booster, and the booster plug goes to the ESC, supplying the higher voltage.

1S ESC:
If there are any missing please add them!!

If anyone would like a need for a chart comparing the ESC's specs PM fenton06 and I'll get one made and put in here!
Voltage Boosters:
If there are any missing please add them!
Servos:
BODIES:
Black Art (CRC - US Dist):
  • Audi R8C - BA002 - .020 Thick



  • Black Market (Mohawk 12) - BA005 - .020



  • Lola B10 - BA006 - .020 thick
  • Toyota TS030 - BA008 - .020 thick

    Lola - black/red, TS030 - green/pink


PROTOForm:

Reflex Racing/RSD:

SUSPENSION ADJUSTMENTS:

Print Wikipost

Reply
 
Thread Tools Search this Thread
Old 11-02-2006, 12:53 PM   #21646
Tech Champion
 
TimPotter's Avatar
 
Join Date: Sep 2001
Location: Boynton Beach Fl > Randoph NJ
Posts: 7,481
Trader Rating: 14 (100%+)
Send a message via AIM to TimPotter
Default

Kinda looks like a Speed 12 with a wide cockpit....
__________________
Clean Title & Escrow|p3|TRF|Tamiya|SerpentAmerica|FSEARA|Team Butter|RC 3|Munno |RCTECH #29|EAMotorsports|BMI|Novak|SpeedPassion|RadioPost
TimPotter is offline   Reply With Quote
Old 11-02-2006, 01:55 PM   #21647
Tech Elite
 
Slapmaster6000's Avatar
 
Join Date: Sep 2004
Location: Edmonds, Wash.
Posts: 2,947
Trader Rating: 14 (100%+)
Default

A page has been taken from the 1/8th scale body that is currently chalking up "W's". Let's get it on the car!
__________________
Stay dialed my friends!
www.slapmastertools.com
Team Roche USA
Team Orca orcharc.com
Slapmaster6000 is offline   Reply With Quote
Old 11-02-2006, 02:04 PM   #21648
Tech Master
 
chicky03's Avatar
 
Join Date: Mar 2002
Posts: 1,938
Trader Rating: 1 (100%+)
Send a message via AIM to chicky03
Default

Quote:
Originally Posted by Slapmaster6000
A page has been taken from the 1/8th scale body that is currently chalking up "W's". Let's get it on the car!


The part number for the Speed 8 HD is 10206 and 10206L for the lightweight one. We are shipping to distributors now.

Paul
__________________
Serpent America, Picco, Blitz Bodies, Team Titan, Desoto Racing, LRP, Motiv, J Concepts, Nitro Pro fuel, PT RC Racing Oils, TQ Wire(best wire ever!), BSR tires, Arrowmax, Xceed, Sanwa.
chicky03 is offline   Reply With Quote
Old 11-02-2006, 02:13 PM   #21649
Tech Champion
 
Korey Harbke's Avatar
 
Join Date: Oct 2002
Location: Redmond, WA
Posts: 6,053
Trader Rating: 13 (100%+)
Default

Mmmmmmm downforce
__________________
Pro Spec America/Apex RC - Team ORCA - Awesomatix USA - Roche RC USA - AVID - Sweep - Protoform - Pro-One RC - Slapmaster Tools - Hebiki Design Works - Turtlemaster Racing - Seattle RC Racers - Timezone Hobbies
Korey Harbke is offline   Reply With Quote
Old 11-02-2006, 02:15 PM   #21650
Tech Addict
 
radio_car_racer's Avatar
 
Join Date: Apr 2004
Posts: 543
Trader Rating: 1 (100%+)
Default New 12th Car from Finland

At the last UK 12th National in Crewe hear in the UK Andy Griffiths was running a new prototype 12th car that word has it came out of Finland.

Has a similar rear pod brace to the new CRC Generation X car

No pics sorry, just looking for more info.
radio_car_racer is offline   Reply With Quote
Old 11-02-2006, 02:24 PM   #21651
Tech Champion
 
Scottrik's Avatar
 
Join Date: Sep 2004
Location: Billings, MT
Posts: 6,120
Trader Rating: 237 (100%+)
Default

Any word on a GenX upgrade kit for our 3.2R's? Would this even be possible?

Scottrik
Scottrik is offline   Reply With Quote
Old 11-02-2006, 02:35 PM   #21652
Tech Regular
 
Join Date: May 2004
Location: Cleveland, Ohio
Posts: 338
Trader Rating: 5 (100%+)
Default

Quote:
Originally Posted by Scottrik
Any word on a GenX upgrade kit for our 3.2R's? Would this even be possible?

Scottrik
I don't think that a conversion kit would be worth the trouble. There aren't going to be many parts that will be the same from the 3.2R to the GenX other than the damper tubes and the shock...
brianrice is offline   Reply With Quote
Old 11-02-2006, 02:47 PM   #21653
Tech Champion
 
Scottrik's Avatar
 
Join Date: Sep 2004
Location: Billings, MT
Posts: 6,120
Trader Rating: 237 (100%+)
Default

I guess I should have phrased it differently.

I was specifically interested in the front suspension--I'm curious if it has the same screw spacing as the Associated Reactive Caster assembly they've been using AND if it is compatible will it be offered as a package rather than a part-by-part replacement.

Secondly, it LOOKS (certainly not sure about this) that the chief difference with the rear pod is the top plate. Curious as to whether this is true.

Pretty sure the "new" battery retention system would bolt right in.

The other items DO seem beyond reasonable updating...go buy the kit.

Scottrik
Scottrik is offline   Reply With Quote
Old 11-02-2006, 02:48 PM   #21654
Tech Elite
 
vtl1180ny's Avatar
R/C Tech Charter Subscriber
 
Join Date: Sep 2003
Location: Wrong Island
Posts: 4,961
Default

Quote:
Originally Posted by Scottrik
Any word on a GenX upgrade kit for our 3.2R's? Would this even be possible?

Scottrik
I'm just waiting for the whole new car, giving my 3.2 to my 7 year old son...
__________________
I still lurk....
vtl1180ny is offline   Reply With Quote
Old 11-02-2006, 02:53 PM   #21655
Tech Champion
 
Scottrik's Avatar
 
Join Date: Sep 2004
Location: Billings, MT
Posts: 6,120
Trader Rating: 237 (100%+)
Default

Quote:
Originally Posted by vtl1180ny
I'm just waiting for the whole new car, giving my 3.2 to my 7 year old son...
Surprised to hear you aren't making one yourself
Scottrik is offline   Reply With Quote
Old 11-02-2006, 03:08 PM   #21656
Tech Elite
 
vtl1180ny's Avatar
R/C Tech Charter Subscriber
 
Join Date: Sep 2003
Location: Wrong Island
Posts: 4,961
Default

Quote:
Originally Posted by Scottrik
Surprised to hear you aren't making one yourself
No CNC mill and I dont have the time to mill the pieces by hand....
__________________
I still lurk....
vtl1180ny is offline   Reply With Quote
Old 11-02-2006, 03:17 PM   #21657
Tech Elite
 
Slapmaster6000's Avatar
 
Join Date: Sep 2004
Location: Edmonds, Wash.
Posts: 2,947
Trader Rating: 14 (100%+)
Default Roll over Betoven

Since we are all excited about new cars and bodies and front ends...

Who's getting all fired up about a carbon fiber hollow roll over antenna?

I know, it's nothing new and hardly exciting, but I understand that Paragon stopped production of them. And thanks to Robert at Ashford Hobby, he said there is still a demand for them. This is where I come in. Hollow, 1.5 grams, and black! I have already run them without issues, even with my Spektrum system. And thanks to Scottrik, I put a relief notch for your antenna wire in the tube under the cap so that it does not get snipped! Sorry Scottrik: your proto's didn't come with the cool knotch.

Did I mention they are black?

Part #111

Drop me a PM or email for more details
Attached Thumbnails
1/12 forum-ant-cap.jpg   1/12 forum-111-roll-ant.jpg  
__________________
Stay dialed my friends!
www.slapmastertools.com
Team Roche USA
Team Orca orcharc.com
Slapmaster6000 is offline   Reply With Quote
Old 11-02-2006, 03:18 PM   #21658
Shop Owner
 
nnick's Avatar
R/C Tech Charter Subscriber
 
Join Date: Aug 2001
Location: Cheapest prices in Europe ;)
Posts: 1,332
Trader Rating: 1 (100%+)
Send a message via ICQ to nnick Send a message via MSN to nnick Send a message via Yahoo to nnick Send a message via Skype™ to nnick
Default

Do you know if a generation X kit with t-bar qill also be available?

Nick
__________________
Nikolakopoulos Nick
RC RING

The #1 source for all your electric needs www.rcring.eu

Enjoy RCing....
R/C Tech #82
IRT #123

Don't practice until you get it right. Practice until you can't get it wrong
nnick is offline   Reply With Quote
Old 11-02-2006, 03:19 PM   #21659
Tech Elite
 
vtl1180ny's Avatar
R/C Tech Charter Subscriber
 
Join Date: Sep 2003
Location: Wrong Island
Posts: 4,961
Default

Question is, can you fit the Nomadio antenna in it???
__________________
I still lurk....
vtl1180ny is offline   Reply With Quote
Old 11-02-2006, 03:21 PM   #21660
Tech Elite
 
odpurple's Avatar
 
Join Date: Dec 2002
Location: San Francisco
Posts: 2,187
Default

I too was sad to see the Paragon Pro Stick antenna go away but I've been using the SpeedMerchant Hollow cf roll overs for some time now and they work great.
__________________
TOP Racing USA--OD Racing--Novak--Power Push--J Spec
odpurple is offline   Reply With Quote
Reply

Similar Threads
Thread Thread Starter Forum Replies Last Post
New to the forum mig rod Electric Off-Road 1 01-05-2008 05:23 PM
hi i need help and im new to the forum racer4 Rookie Zone 4 01-21-2007 02:37 PM
Why is this forum listed under the On Road Forum? sport10 Onroad Nitro Engine Zone 0 01-11-2007 08:06 AM
Forum Changes... futureal Wisconsin & Illinois Racing 3 10-28-2002 09:26 PM



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off



All times are GMT -7. It is currently 05:23 AM.


Powered By: vBulletin v3.9.2.1
Privacy Policy | Terms of Use | Advertise Content © 2001-2011 RCTech.net

SEO by vBSEO 3.5.0