R/C Tech Forums

Go Back   R/C Tech Forums > General Forums > Electric On-Road

    Hide Wikipost
Old 10-28-2016, 12:43 PM   -   Wikipost
R/C Tech Forums Thread Wiki: 1/12 forum
Please read: This is a community-maintained wiki post containing the most important information from this thread. You may edit the Wiki once you have been a member for 90 days and have made 90 posts.
 
Last edit by: fenton06
This is a place to share knowledge related to 1/12th scale racing. It is not to be used for conversations.

KITS:
Click links to go to manufacturer product page. If any are missing please add them!

TIRES:
Pre-mounted tires readily available in the US:
Pre-mounted tires readily available in the Europe:
  • Hot Race ??

Gluing your own donuts:
https://www.youtube.com/watch?v=hm7z1rz-74s - Special thanks to Edward Pickering!
Truing tires:
https://www.youtube.com/watch?v=8wqHOLWq6Uc - Special thanks to Edward Pickering!

The following information came from HERE, with some editing and information added. Thanks Christian!

THIS MAY NEED UPDATING FOR THE NEW BLACK CRC CARPET

Brands:
BSR, CRC, Jaco:
Pro One is no longer selling to the public, but it and the brands above are all mounted by BSR and use the same foam. The nomenclature of the BSR vs Jaco/CRC is a little different in a few instances but is otherwise the same. The BSR foam consists of three families, and can be identifed as synthetics, naturals, and blends.

Synthetics - The old school, light weight, easy to true "dry feeling" tires. These include tires like CRC/Jaco Yellow (BSR White), Black, Gray, etc. These tires offer the highest wear rate and lowest grip. Many racers continue to use these nder high bite conditions.

Naturals - These tires are usually the best alternative for low bite and asphalt. They include Pink, Magenta, Double Pink, Lilac (BSR Team Purple), Purple, and other tires. These tires provide a ton of grip, but tend to get sticky in high bite conditions. This rubber does not wear as easily, and the cars will pick up gunk and fibers from the carpet under most high bite conditions. This is especially bad if the humidity is high.

Blends - These are the tires most people run today. They were initially called "JFT foam" by some, as it was believed that the tires were the same as the JFT tires. We can divide the blends further into two groups: high rubber and low rubber content. The high rubber would be the new rear Orange and Red from the BSR family, and the low rubber would be the Green and Blue varieties. When, asked about the difference, John Foister from BSR Tires said they came from the same "family" of foam, but they offered different grip. According to John, the Green/Blue has more bite than Orange/Red, but from track testing Oranges offer more bite than Green (being equivalent to in hardness) when the grip is high and absolutely no grip when it is lower. The Orange foam has a denser pore structure and the tire is not as prone to chunking. It is also important to note is that BSR Blue rears are not the same as the BSR Blue fronts!

JFT:
JFT stands for Japan Foam Tire. They started the new wave of foam tires we are all using now (Blue/Blu, Green/Greene, Dbl Blue, etc). These tires are a little different than the BSR tire family, but work in very similar conditions. They offers four varieties A (asphalt), C (carpet), S (???), and R (???). This does not mean that those types only work on that surface, but this is what they recommend.

JFT uses the same foam for fronts and rears if the color is the same.

A: Used on asphalt, considered close to the natural rubber variety and are named consistently with other natural tires.
C: Used on carpet, considered a blend.
S: Used on carpet?, tires are ???
R: Used on carpet?, tires are ???

For setup, the JFT foam seem to generate more bite than the BSR, therefore the car tends to be a little more aggressive.

Ulti:
Ulti is another Japanese brand that offers an array of compounds. They have their own way of rating tires, and are difficult to equate to other brands. They have 4 different varieties, each in varying degrees of hardness.

J: High rubber content tire, similar to Pink/ Magenta. Soft would be close to a pink. These offer the most bite and are great for asphalt/carpet front tire. (J hard being very popular)
X: "Balanced" blend, similar to JFT Blue/ Green. Soft is equivalent to Green, medium to Blue in hardness. Great for carpet!
Y: High synthetic blend with lower grip, and is not a very popular variety.
Z: A very expensive "special" foam that is supposed to be magic on asphalt. Only make it in soft shore.
European tires:
There are many great European foam tire brands that use their own types of foam, as well as traditional foams. SOmeone with more knowledge about them will need to fill this in!

Tire Diameter:
If you are racing on carpet, you have to evaluate how much grip your track has. If your track is low to medium grip, you can run bigger tires. If you are on higher bite you have to cut them smaller, there is simply no way around it. Bigger tires are needed for asphalt, especially in the rear. The larger tires provide much needed lateral bite.

Carpet (mm):
Low - Medium Bite
Front: 42.0 - 42.5
Rear: 42.5 - 43.00
Medium - High Bite
Front: 40.5 - 41.0
Rear: 41.5 - 42.0
Big Race
Front: 39.5 - 40.0
Rear: 40.5 - 41.0
Asphalt (mm):
Parking Lot
Front: 43.0 - 44.0
Rear: 44.0 - 45.0
Prepped High Bite
Front: 42.0 - 43.0
Rear: 43.0 - 44.0

Tire Saucing:
Most facilities have moved towards odorless traction additives such as SXT. Some of additives evaporate very quickly and some do not. This seems to be something that is also dependent on tire compound and ambient temperature. For example, saucing a Green compound seems like it never dries, especially when tjhe temperature is lower. We have found that wiping the tires off 15 minutes before we go run allows the sauce to cure, which makes the car come in much quicker with Green rears. Blue compounds on the other hand, do fine when wiped off right before hitting the track.

Saucing half front and full rear is a good initial starting point. If the front of the car is too agressive you can sauce les than half, or for a shorter amount of time.
Tire Fuzzing:
In conditions of increasing grip, foam tires will somewtimes get sticky and pick up fuzz and debris from the track. This is highly dependent on the rubber sedan tire that is being run at your local track and the compound/ type of foam you are running on you car. The softer the sedan tire and the harder/higher rubber content in your foam tire, trouble with fuzzing seems more likely to occur.

There are ways to get around fuzzing under most conditions, and usually involves the selection of the correct foam compound. The more fuzz you get, the softer/lower rubber content you want to run.

Examples:
Problem: Car fuzzes with Lilac/Team Purple fronts and car starts pushing.
Solution: Use a softer front tire and or different family of foam. Replace it with Blue or Double Blue front.

Problem: Car loses rear bite 6 minutes into the run. Blue rear tires look almost clean but have small carpet hairs.
Solution: Use Green rear tires. The softer compound wears instead of getting sticky, minimizing fuzz.

Tire Selection:
Starting out, pick 2 tire compounds for the front and rear. The following should have you covered 99% of the time.

Front - Green and Blue (BSR) or Green and Light Blue (JFT)
Rear - Blue and Double Blue (BSR) or Blue and Dark Blue (JFT)

You may wonder about other compounds out there and if they might be better, trust me, they probably won't be. Even if there are other tires that can be as fast, the synthetic family wears out really fast and the high natural rubber will probably fuzz on you over an 8 minute run. The blends family seems to be the most versatile foam type available today. They last awhile, and sticking to them will make your process of tire selection simpler.
Tire Charts:
BSR/CRC/Jaco



Contact



Corally



JFT (Japan Foam Tire)



Ulti



Enneti (Xceed)



ELECTRONICS:
ESC:
As of now, ROAR is staying 1S (3.7V nominal; 4.2V fully charged) for 1/12. There are many 1S ESC's with a built in BEC so nothing else is required to power the receiver and servo.

If you don't want to lock yourself into a 1S specific ESC, you do have other options! It is possible to use your 2S ESC without a booster or receiver pack, and the ESC simply supplies the lower voltage. If that does not appeal to you, you will need to use an Rx pack or booster. The Rx pack and booster will both supply the receiver with a higher voltage than the 1S pack.

If you decide to use an Rx pack, MAKE SURE TO REMOVE THE RED WIRE FROM THE ESC PLUG THAT GOES INTO THE RECEIVER!!!

If you choose to use a voltage booster, it works exactly how it sounds. Instead of plugging the ESC into the receiver, it plugs into the booster, and the booster plug goes to the ESC, supplying the higher voltage.

1S ESC:
If there are any missing please add them!!

If anyone would like a need for a chart comparing the ESC's specs PM fenton06 and I'll get one made and put in here!
Voltage Boosters:
If there are any missing please add them!
Servos:
BODIES:
Black Art (CRC - US Dist):
  • Audi R8C - BA002 - .020 Thick



  • Black Market (Mohawk 12) - BA005 - .020



  • Lola B10 - BA006 - .020 thick
  • Toyota TS030 - BA008 - .020 thick

    Lola - black/red, TS030 - green/pink


PROTOForm:

Reflex Racing/RSD:

SUSPENSION ADJUSTMENTS:

Print Wikipost

Reply
 
Thread Tools Search this Thread
Old 11-01-2006, 08:21 AM   #21616
Tech Elite
 
Mason's Avatar
 
Join Date: Oct 2004
Location: Ocala, Florida
Posts: 4,582
Default

another thrust bearing :P
__________________
Mason McCombs
NewRed Hobbies & Indoor Facility
Off-Road, Dirt Oval, Crawlers & Pullers
Mason is offline   Reply With Quote
Old 11-01-2006, 08:27 AM   #21617
Tech Elite
 
dr_hfuhuhurr's Avatar
 
Join Date: Aug 2003
Location: Westchester, NY
Posts: 4,427
Trader Rating: 69 (100%+)
Default

Front and Rear wheel offset...what's the deal with the differences between brands? Can anyone edjumicate me?
__________________
"There is a fine line between hobby and mental illness. Which side are you on?"

“Life is hard; it's harder if you're stupid.” - John Wayne
dr_hfuhuhurr is offline   Reply With Quote
Old 11-01-2006, 09:26 AM   #21618
Tech Elite
 
Slapmaster6000's Avatar
 
Join Date: Sep 2004
Location: Edmonds, Wash.
Posts: 2,949
Trader Rating: 14 (100%+)
Default

The white spot is a ghost's finger print from Halloween.

Thrust bearing! Yea.... that's it.

It's something I am working on that I will expect to sell well. There will be more testing tonight at Rain City. If all goes as expected, the order will go out for mass production.

I guess you could call it the cure for the 6:30 car.

Just a quicky comparison between brands: the offset between Jaco and CRC is very close, Parma is roughly .080" deeper offset at the rears. The fronts, I do not have memorized. Parma should used flanged bearings, Jaco can go either with or without, CRC needs unflanged.
__________________
Stay dialed my friends!
www.slapmastertools.com
Team Roche USA
Team Orca orcharc.com
Slapmaster6000 is offline   Reply With Quote
Old 11-01-2006, 10:37 AM   #21619
Tech Elite
 
Grenade10's Avatar
 
Join Date: Nov 2003
Location: Fort Collins, Colorado
Posts: 4,667
Trader Rating: 37 (100%+)
Default

Slampmaster6000 - I built my rear diff last night using your kit that I got from Robert at Ashford Hobbies.

All I can say is WOW!!

I've been racing 1/12 scale since the mid 80's, this little item would have saved me weeks worth of time working over diffs.
__________________
Darkside, Sweep, BSR, Fantom, IGT Hobbies and IGT8
Byrons Fuel, ProtoForm Bodies & Futaba Radio Gear by Choice
Founding Member of CORRC .... 5280raceway
www.darksidems.com www.igthobbies.com www.IGT8.com
Grenade10 is offline   Reply With Quote
Old 11-01-2006, 11:48 AM   #21620
Tech Master
 
smyka's Avatar
 
Join Date: Dec 2003
Location: Broad Brook,CT
Posts: 1,182
Send a message via AIM to smyka
Default

slapmaster i will le t greg know about the car .. and how much doe syou thrust asse.cost i would liek to get two for my 1/12 ccars before cleveland ..


now as for the the crc car that is the new knife gen x car it will be released the end of this week after months of testing frank has finally come up with everything he thinks he wants in a car i ran the first prototype at the gate this last weekend with great success and frank mike blackstock,jeff dayger and jeff cuffs all ran the exact car that will be run also with great success so look out this will be the car to have thsi year ..

mark smyka
__________________
Trinity, Proline ,EA motorsports, T.O.P Racing ,Futaba ,Bsr Racing tires ,Advantage racing products,Hot Bodies racing,Tq Wire ,REDS Racing, Orca ,Protoform racing
smyka is offline   Reply With Quote
Old 11-01-2006, 12:14 PM   #21621
Tech Elite
 
Slapmaster6000's Avatar
 
Join Date: Sep 2004
Location: Edmonds, Wash.
Posts: 2,949
Trader Rating: 14 (100%+)
Default

Grenade10;.... and now you will get lazy!

I want a new CRC car now.
__________________
Stay dialed my friends!
www.slapmastertools.com
Team Roche USA
Team Orca orcharc.com
Slapmaster6000 is offline   Reply With Quote
Old 11-01-2006, 12:18 PM   #21622
Tech Elite
 
dr_hfuhuhurr's Avatar
 
Join Date: Aug 2003
Location: Westchester, NY
Posts: 4,427
Trader Rating: 69 (100%+)
Default

I'll be looking forward to checking out that new front end...looks killer.
__________________
"There is a fine line between hobby and mental illness. Which side are you on?"

“Life is hard; it's harder if you're stupid.” - John Wayne
dr_hfuhuhurr is offline   Reply With Quote
Old 11-01-2006, 01:49 PM   #21623
Tech Elite
 
Mason's Avatar
 
Join Date: Oct 2004
Location: Ocala, Florida
Posts: 4,582
Default

its rear steer. for those all important 180s.
__________________
Mason McCombs
NewRed Hobbies & Indoor Facility
Off-Road, Dirt Oval, Crawlers & Pullers
Mason is offline   Reply With Quote
Old 11-01-2006, 02:24 PM   #21624
Tech Rookie
 
Join Date: Oct 2006
Posts: 5
Default

how differnt will my cariizle feel if i put a .75 tbar on when i am now running a .63 bizzar?
Bad_Billy-O is offline   Reply With Quote
Old 11-01-2006, 03:37 PM   #21625
Tech Champion
 
AdrianM's Avatar
 
Join Date: Aug 2001
Location: Tampa, FL
Posts: 5,914
Trader Rating: 4 (100%+)
Default

Quote:
Originally Posted by Bad_Billy-O
how differnt will my cariizle feel if i put a .75 tbar on when i am now running a .63 bizzar?
On Carpet with the 3 pod mounting screw in place it will free up the rear of the car and give you sharper steering. With 2 screw in place it will free up the rear of the car and make the steering less sharp.

The .075 T is only used on asphalt if the track is glass smooth and high grip. I have tried it several times over the years on asphalt and it is never as good as a .063.
__________________
Adrian Martinez
What I run: Schumacher Mi5/Associated RC10R5.1/Associated RC12R5.2/Futaba/HobbyWing/Team EA Motorsports/BSR Racing
Where I run: Florida Indoor R/C Complex/Thunder Racing/Florida On Road State Series
AdrianM is offline   Reply With Quote
Old 11-01-2006, 04:10 PM   #21626
Tech Master
 
Mike Ellis's Avatar
R/C Tech Elite Subscriber
 
Join Date: Jun 2005
Location: Aloha,Oregon
Posts: 1,535
Trader Rating: 5 (100%+)
Default

Quote:
Originally Posted by Scooby Horton
What size is everybody starting there 1/12 tires at?
I didn't see an answer to your question, I personally start fronts at 1.7" and rear at 1.8 to 1.85 "
Mike Ellis is offline   Reply With Quote
Old 11-01-2006, 04:43 PM   #21627
Tech Champion
 
rayhuang's Avatar
 
Join Date: Dec 2001
Location: Cleveland Heights, Ohio
Posts: 6,511
Trader Rating: 5 (100%+)
Send a message via AIM to rayhuang
Default

OK-heres a couple shots of the Parma Speed 8HD. This is Not final, final, but its close.
Attached Thumbnails
1/12 forum-speed8hd.jpg   1/12 forum-speed8hd2.jpg  
rayhuang is offline   Reply With Quote
Old 11-01-2006, 04:52 PM   #21628
Tech Elite
 
wallstreet's Avatar
 
Join Date: Mar 2005
Posts: 3,904
Trader Rating: 20 (92%+)
Send a message via AIM to wallstreet
Default

ray did you run the geration x crc car ? and what does the hd stand for heavy duty ?
wallstreet is offline   Reply With Quote
Old 11-01-2006, 04:54 PM   #21629
Tech Master
 
JamesArluck's Avatar
 
Join Date: Jul 2003
Posts: 1,232
Trader Rating: 52 (100%+)
Send a message via AIM to JamesArluck
Default

HD= high downforce.

Cool body, should handle really well. The only part i'm not crazy about is where the new fins meet the rear wheel wells. That part could stand to get smoothed out a bit, but the rest of it looks awesome.

-James
JamesArluck is offline   Reply With Quote
Old 11-01-2006, 05:04 PM   #21630
Tech Fanatic
 
RobS's Avatar
 
Join Date: Jul 2004
Location: Chatham, Ontario
Posts: 806
Default

Quote:
Originally Posted by smyka
slapmaster i will le t greg know about the car .. and how much doe syou thrust asse.cost i would liek to get two for my 1/12 ccars before cleveland ..


now as for the the crc car that is the new knife gen x car it will be released the end of this week after months of testing frank has finally come up with everything he thinks he wants in a car i ran the first prototype at the gate this last weekend with great success and frank mike blackstock,jeff dayger and jeff cuffs all ran the exact car that will be run also with great success so look out this will be the car to have thsi year ..

mark smyka
Blackstock running a CRC car? What happened to Trinity?

From the pics the new car looks awesome. I've been debating on whether to replace my current 12th scale and have to say I was leaning towards the Rev 4.5, but now that CRC has finally announced the new car is coming, I think I've made my descision...
__________________
Rob Say
Action Hobbies Kingsville
"In racing you never really lose. You either win, or learn."
RobS is offline   Reply With Quote
Reply

Similar Threads
Thread Thread Starter Forum Replies Last Post
New to the forum mig rod Electric Off-Road 1 01-05-2008 05:23 PM
hi i need help and im new to the forum racer4 Rookie Zone 4 01-21-2007 02:37 PM
Why is this forum listed under the On Road Forum? sport10 Onroad Nitro Engine Zone 0 01-11-2007 08:06 AM
Forum Changes... futureal Wisconsin & Illinois Racing 3 10-28-2002 09:26 PM



Currently Active Users Viewing This Thread: 2 (0 members and 2 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off



All times are GMT -7. It is currently 04:10 PM.


Powered By: vBulletin v3.9.2.1
Privacy Policy | Terms of Use | Advertise Content © 2001-2011 RCTech.net

SEO by vBSEO 3.5.0