R/C Tech Forums

Go Back   R/C Tech Forums > General Forums > Electric On-Road

    Hide Wikipost
Old 10-28-2016, 12:43 PM   -   Wikipost
R/C Tech Forums Thread Wiki: 1/12 forum
Please read: This is a community-maintained wiki post containing the most important information from this thread. You may edit the Wiki once you have been a member for 90 days and have made 90 posts.
 
Last edit by: fenton06
This is a place to share knowledge related to 1/12th scale racing. It is not to be used for conversations.

KITS:
Click links to go to manufacturer product page. If any are missing please add them!

TIRES:
Pre-mounted tires readily available in the US:
Pre-mounted tires readily available in the Europe:
  • Hot Race ??

Gluing your own donuts:
https://www.youtube.com/watch?v=hm7z1rz-74s - Special thanks to Edward Pickering!
Truing tires:
https://www.youtube.com/watch?v=8wqHOLWq6Uc - Special thanks to Edward Pickering!

The following information came from HERE, with some editing and information added. Thanks Christian!

THIS MAY NEED UPDATING FOR THE NEW BLACK CRC CARPET

Brands:
BSR, CRC, Jaco:
Pro One is no longer selling to the public, but it and the brands above are all mounted by BSR and use the same foam. The nomenclature of the BSR vs Jaco/CRC is a little different in a few instances but is otherwise the same. The BSR foam consists of three families, and can be identifed as synthetics, naturals, and blends.

Synthetics - The old school, light weight, easy to true "dry feeling" tires. These include tires like CRC/Jaco Yellow (BSR White), Black, Gray, etc. These tires offer the highest wear rate and lowest grip. Many racers continue to use these nder high bite conditions.

Naturals - These tires are usually the best alternative for low bite and asphalt. They include Pink, Magenta, Double Pink, Lilac (BSR Team Purple), Purple, and other tires. These tires provide a ton of grip, but tend to get sticky in high bite conditions. This rubber does not wear as easily, and the cars will pick up gunk and fibers from the carpet under most high bite conditions. This is especially bad if the humidity is high.

Blends - These are the tires most people run today. They were initially called "JFT foam" by some, as it was believed that the tires were the same as the JFT tires. We can divide the blends further into two groups: high rubber and low rubber content. The high rubber would be the new rear Orange and Red from the BSR family, and the low rubber would be the Green and Blue varieties. When, asked about the difference, John Foister from BSR Tires said they came from the same "family" of foam, but they offered different grip. According to John, the Green/Blue has more bite than Orange/Red, but from track testing Oranges offer more bite than Green (being equivalent to in hardness) when the grip is high and absolutely no grip when it is lower. The Orange foam has a denser pore structure and the tire is not as prone to chunking. It is also important to note is that BSR Blue rears are not the same as the BSR Blue fronts!

JFT:
JFT stands for Japan Foam Tire. They started the new wave of foam tires we are all using now (Blue/Blu, Green/Greene, Dbl Blue, etc). These tires are a little different than the BSR tire family, but work in very similar conditions. They offers four varieties A (asphalt), C (carpet), S (???), and R (???). This does not mean that those types only work on that surface, but this is what they recommend.

JFT uses the same foam for fronts and rears if the color is the same.

A: Used on asphalt, considered close to the natural rubber variety and are named consistently with other natural tires.
C: Used on carpet, considered a blend.
S: Used on carpet?, tires are ???
R: Used on carpet?, tires are ???

For setup, the JFT foam seem to generate more bite than the BSR, therefore the car tends to be a little more aggressive.

Ulti:
Ulti is another Japanese brand that offers an array of compounds. They have their own way of rating tires, and are difficult to equate to other brands. They have 4 different varieties, each in varying degrees of hardness.

J: High rubber content tire, similar to Pink/ Magenta. Soft would be close to a pink. These offer the most bite and are great for asphalt/carpet front tire. (J hard being very popular)
X: "Balanced" blend, similar to JFT Blue/ Green. Soft is equivalent to Green, medium to Blue in hardness. Great for carpet!
Y: High synthetic blend with lower grip, and is not a very popular variety.
Z: A very expensive "special" foam that is supposed to be magic on asphalt. Only make it in soft shore.
European tires:
There are many great European foam tire brands that use their own types of foam, as well as traditional foams. SOmeone with more knowledge about them will need to fill this in!

Tire Diameter:
If you are racing on carpet, you have to evaluate how much grip your track has. If your track is low to medium grip, you can run bigger tires. If you are on higher bite you have to cut them smaller, there is simply no way around it. Bigger tires are needed for asphalt, especially in the rear. The larger tires provide much needed lateral bite.

Carpet (mm):
Low - Medium Bite
Front: 42.0 - 42.5
Rear: 42.5 - 43.00
Medium - High Bite
Front: 40.5 - 41.0
Rear: 41.5 - 42.0
Big Race
Front: 39.5 - 40.0
Rear: 40.5 - 41.0
Asphalt (mm):
Parking Lot
Front: 43.0 - 44.0
Rear: 44.0 - 45.0
Prepped High Bite
Front: 42.0 - 43.0
Rear: 43.0 - 44.0

Tire Saucing:
Most facilities have moved towards odorless traction additives such as SXT. Some of additives evaporate very quickly and some do not. This seems to be something that is also dependent on tire compound and ambient temperature. For example, saucing a Green compound seems like it never dries, especially when tjhe temperature is lower. We have found that wiping the tires off 15 minutes before we go run allows the sauce to cure, which makes the car come in much quicker with Green rears. Blue compounds on the other hand, do fine when wiped off right before hitting the track.

Saucing half front and full rear is a good initial starting point. If the front of the car is too agressive you can sauce les than half, or for a shorter amount of time.
Tire Fuzzing:
In conditions of increasing grip, foam tires will somewtimes get sticky and pick up fuzz and debris from the track. This is highly dependent on the rubber sedan tire that is being run at your local track and the compound/ type of foam you are running on you car. The softer the sedan tire and the harder/higher rubber content in your foam tire, trouble with fuzzing seems more likely to occur.

There are ways to get around fuzzing under most conditions, and usually involves the selection of the correct foam compound. The more fuzz you get, the softer/lower rubber content you want to run.

Examples:
Problem: Car fuzzes with Lilac/Team Purple fronts and car starts pushing.
Solution: Use a softer front tire and or different family of foam. Replace it with Blue or Double Blue front.

Problem: Car loses rear bite 6 minutes into the run. Blue rear tires look almost clean but have small carpet hairs.
Solution: Use Green rear tires. The softer compound wears instead of getting sticky, minimizing fuzz.

Tire Selection:
Starting out, pick 2 tire compounds for the front and rear. The following should have you covered 99% of the time.

Front - Green and Blue (BSR) or Green and Light Blue (JFT)
Rear - Blue and Double Blue (BSR) or Blue and Dark Blue (JFT)

You may wonder about other compounds out there and if they might be better, trust me, they probably won't be. Even if there are other tires that can be as fast, the synthetic family wears out really fast and the high natural rubber will probably fuzz on you over an 8 minute run. The blends family seems to be the most versatile foam type available today. They last awhile, and sticking to them will make your process of tire selection simpler.
Tire Charts:
BSR/CRC/Jaco



Contact



Corally



JFT (Japan Foam Tire)



Ulti



Enneti (Xceed)



ELECTRONICS:
ESC:
As of now, ROAR is staying 1S (3.7V nominal; 4.2V fully charged) for 1/12. There are many 1S ESC's with a built in BEC so nothing else is required to power the receiver and servo.

If you don't want to lock yourself into a 1S specific ESC, you do have other options! It is possible to use your 2S ESC without a booster or receiver pack, and the ESC simply supplies the lower voltage. If that does not appeal to you, you will need to use an Rx pack or booster. The Rx pack and booster will both supply the receiver with a higher voltage than the 1S pack.

If you decide to use an Rx pack, MAKE SURE TO REMOVE THE RED WIRE FROM THE ESC PLUG THAT GOES INTO THE RECEIVER!!!

If you choose to use a voltage booster, it works exactly how it sounds. Instead of plugging the ESC into the receiver, it plugs into the booster, and the booster plug goes to the ESC, supplying the higher voltage.

1S ESC:
If there are any missing please add them!!

If anyone would like a need for a chart comparing the ESC's specs PM fenton06 and I'll get one made and put in here!
Voltage Boosters:
If there are any missing please add them!
Servos:
BODIES:
Black Art (CRC - US Dist):
  • Audi R8C - BA002 - .020 Thick



  • Black Market (Mohawk 12) - BA005 - .020



  • Lola B10 - BA006 - .020 thick
  • Toyota TS030 - BA008 - .020 thick

    Lola - black/red, TS030 - green/pink


PROTOForm:

Reflex Racing/RSD:

SUSPENSION ADJUSTMENTS:

Print Wikipost

Reply
 
Thread Tools Search this Thread
Old 10-14-2006, 01:17 AM   #21256
Tech Adept
 
mooony's Avatar
 
Join Date: Jun 2005
Posts: 117
Default

Quote:
Originally Posted by protc3
i ran against one this weekend.it didnt look as great as its supposed to be.2 laps off pace with a a very good corally driver behind the wheel.im sure that time will make them better but i was not impressed with the performance.it was pretty though
So it means it is better not to buy this car.

Another question. When will your car(kit) be ready and will you export it to europe?

Thanks.

Ronald
mooony is offline   Reply With Quote
Old 10-14-2006, 02:33 AM   #21257
Tech Champion
 
cannon's Avatar
 
Join Date: Sep 2003
Location: A total distraction
Posts: 7,266
Trader Rating: 35 (100%+)
Default

Which aftermarket companies chassis's are slightly longer than the standard L4 chassis. Extra length supposably adds grip for outdoor asphalt racing so I am looking for a slightly longer chassis. Also when they are longer, do they narrow the steering arm position?

Thanks in advance for the information (if I get it)
__________________
www.feralbatteries.com ........... new website
cannon is offline   Reply With Quote
Old 10-14-2006, 02:57 AM   #21258
Tech Champion
 
danjoy25's Avatar
R/C Tech Charter Subscriber
 
Join Date: Oct 2003
Posts: 5,126
Trader Rating: 37 (100%+)
Default

You got email with pics Mr Cannon
__________________
Top Racing Photon EX / Mugen MTX-5 / Tamiya M05 / 3 Racing FGX & F113 / Kyosho RB5

Western Zydney Racers (Mini-Z Racing in the west)
http://www.rctech.net/forum/australian-racing/658918-1-28-scale-sydney-racing.html
danjoy25 is offline   Reply With Quote
Old 10-14-2006, 05:09 AM   #21259
Tech Adept
 
Join Date: Jul 2006
Posts: 133
Default

Just ran my 12x for the 2nd time indoors tonight, THE THING WENT!

I've been setting it up better and better each time. and i'm just amazed that it can just handle better and better. Did a couple of minor tweaks, and tyre changes, and the car was handling perfect! definately the fastest there.
drivingpro is offline   Reply With Quote
Old 10-14-2006, 05:20 AM   #21260
Tech Addict
 
fathead's Avatar
 
Join Date: Sep 2003
Location: Auckland NZ
Posts: 568
Default

Quote:
Originally Posted by cannon
Which aftermarket companies chassis's are slightly longer than the standard L4 chassis. Extra length supposably adds grip for outdoor asphalt racing so I am looking for a slightly longer chassis. Also when they are longer, do they narrow the steering arm position?

Thanks in advance for the information (if I get it)
The Diggity Designs D12-V2 wheelbase is about 4mm longer than a L3/L4 chassis, I know because I had to recut my rear wheel arches when I got the kit!
__________________
Slavich Design
fathead is offline   Reply With Quote
Old 10-14-2006, 08:21 AM   #21261
Tech Elite
 
Grenade10's Avatar
 
Join Date: Nov 2003
Location: Fort Collins, Colorado
Posts: 4,667
Trader Rating: 37 (100%+)
Default

For a longer wheel base, you can always use the IRS extended rear motor pod. If you buld one, you can swap out back to back and see what change it makes. I use one outside, and standard length inside on the carpet.
__________________
Darkside, Sweep, BSR, Fantom, IGT Hobbies and IGT8
Byrons Fuel, ProtoForm Bodies & Futaba Radio Gear by Choice
Founding Member of CORRC .... 5280raceway
www.darksidems.com www.igthobbies.com www.IGT8.com
Grenade10 is offline   Reply With Quote
Old 10-14-2006, 08:46 AM   #21262
Tech Master
 
David Galdo's Avatar
 
Join Date: Aug 2001
Location: Euless, TX
Posts: 1,652
Trader Rating: 15 (100%+)
Send a message via ICQ to David Galdo Send a message via AIM to David Galdo Send a message via MSN to David Galdo Send a message via Yahoo to David Galdo
Default

Quote:
Originally Posted by mooony
So it means it is better not to buy this car.

Another question. When will your car(kit) be ready and will you export it to europe?

Thanks.

Ronald
It may be awhile....I can't even get images of the kit.

Looking at the SpeedMerchant and Corally again.
__________________
Hot Bodies | HPI Racing | HPI TV | Speedzone USA | Team Epic | Trinity | TRC
V-Dezign 4.0
David Galdo is offline   Reply With Quote
Old 10-14-2006, 10:41 AM   #21263
Tech Lord
 
protc3's Avatar
 
Join Date: Jun 2003
Location: Spring Hill,Florida
Posts: 10,813
Trader Rating: 13 (100%+)
Default

sorry about the images buddy. here are a few pics of the car.
Attached Thumbnails
1/12 forum-db12-2.jpg   1/12 forum-db12-pic.jpg   1/12 forum-db12.jpg  
__________________
Jason Breiner
BMI Racing
Team Associated
J Concepts
protc3 is offline   Reply With Quote
Old 10-14-2006, 10:43 AM   #21264
Tech Champion
 
rayhuang's Avatar
 
Join Date: Dec 2001
Location: Cleveland Heights, Ohio
Posts: 6,511
Trader Rating: 5 (100%+)
Send a message via AIM to rayhuang
Default

Quote:
Originally Posted by mtveten
Can anyone tell me what a parma violet is? I assume it is a multi compound tire but I don't see any info on what they are.

Mark

I just ran them last night on my CRC 3.2r at 1.66" and Pink rears also about 1.67" and car was Money as my old buddy Rob Love would have said!! So much steering and so much corner speed. Ever since we went with the Fastrack I have struggled to find steering to go ballistic and not be loose or dig. This combo felt awesome.

Ray
rayhuang is offline   Reply With Quote
Old 10-14-2006, 10:44 AM   #21265
Tech Lord
 
protc3's Avatar
 
Join Date: Jun 2003
Location: Spring Hill,Florida
Posts: 10,813
Trader Rating: 13 (100%+)
Default

Quote:
Originally Posted by mooony
So it means it is better not to buy this car.

Another question. When will your car(kit) be ready and will you export it to europe?

Thanks.

Ronald
i am working on doing a full car.at this time i offer it as a conversion for the 12L4 based cars.i ship to europe often.it wont be a problem.
__________________
Jason Breiner
BMI Racing
Team Associated
J Concepts
protc3 is offline   Reply With Quote
Old 10-14-2006, 02:30 PM   #21266
Tech Regular
 
part-time racer's Avatar
 
Join Date: Aug 2006
Location: Faster than a speeding bullet
Posts: 458
Default Broken CEFX

While racing at my localish 12th club last night we had a number of new drivers turn up to have a go.
There driving abbility was crap and they where running brushless because thats what the lhs sold them.
The net result of 7 minutes of racing was a smashed chassic

So now I find myself with a busted car, no instruction manual (car bought secondhand) and no way of knowing what part I need to order.

The real pisser for me is the guy didn't even say sorry for doing a U-turn on a straight.
__________________
Richard Clarke
EWS Event Organizer

CPD Racing ___MuchMore-UK___Awesomatix UK___OTM Racing
part-time racer is offline   Reply With Quote
Old 10-14-2006, 03:58 PM   #21267
Tech Regular
 
Z.Hallett's Avatar
 
Join Date: Nov 2005
Location: Reston, Virginia
Posts: 401
Send a message via AIM to Z.Hallett
Default

by looking at your signature your are runnig a CEFX C12. you could go to www.cefxraceway.net, and order it from the store section.

-Zac
Z.Hallett is offline   Reply With Quote
Old 10-14-2006, 04:42 PM   #21268
Tech Elite
 
Mr. Shookie's Avatar
R/C Tech Charter Subscriber
 
Join Date: Sep 2004
Location: The Wilderness
Posts: 4,713
Trader Rating: 9 (100%+)
Send a message via AIM to Mr. Shookie Send a message via MSN to Mr. Shookie
Default

OK compete newbee to 12th question..

What is a good starting rollout for a CO27 and a Komotoo Dragon..
-Shookie <><
__________________
All who love the LORD JESUS I praise with you.1 Cor 10:31
Team HOLY Rollers (Team Manager)
The Church is a Hospital for Sinners not a Museum for Saints.
RcTech Feedback <>< RC Tech Subcriber #92
Mr. Shookie is offline   Reply With Quote
Old 10-14-2006, 05:39 PM   #21269
Tech Master
 
David Galdo's Avatar
 
Join Date: Aug 2001
Location: Euless, TX
Posts: 1,652
Trader Rating: 15 (100%+)
Send a message via ICQ to David Galdo Send a message via AIM to David Galdo Send a message via MSN to David Galdo Send a message via Yahoo to David Galdo
Default

Quote:
Originally Posted by protc3
sorry about the images buddy. here are a few pics of the car.
Sweet Kit! I will get with you soon after the HobbyPlex race.
__________________
Hot Bodies | HPI Racing | HPI TV | Speedzone USA | Team Epic | Trinity | TRC
V-Dezign 4.0
David Galdo is offline   Reply With Quote
Old 10-14-2006, 07:16 PM   #21270
Tech Lord
 
protc3's Avatar
 
Join Date: Jun 2003
Location: Spring Hill,Florida
Posts: 10,813
Trader Rating: 13 (100%+)
Default

Quote:
Originally Posted by Mr. Shookie
OK compete newbee to 12th question..

What is a good starting rollout for a CO27 and a Komotoo Dragon..
-Shookie <><
not sure on the co but the KD i run a 47mm
__________________
Jason Breiner
BMI Racing
Team Associated
J Concepts
protc3 is offline   Reply With Quote
Reply

Similar Threads
Thread Thread Starter Forum Replies Last Post
New to the forum mig rod Electric Off-Road 1 01-05-2008 05:23 PM
hi i need help and im new to the forum racer4 Rookie Zone 4 01-21-2007 02:37 PM
Why is this forum listed under the On Road Forum? sport10 Onroad Nitro Engine Zone 0 01-11-2007 08:06 AM
Forum Changes... futureal Wisconsin & Illinois Racing 3 10-28-2002 09:26 PM



Currently Active Users Viewing This Thread: 4 (1 members and 3 guests)
amuse
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off



All times are GMT -7. It is currently 03:13 AM.


Powered By: vBulletin v3.9.2.1
Privacy Policy | Terms of Use | Advertise Content © 2001-2011 RCTech.net

SEO by vBSEO 3.5.0