R/C Tech Forums

Go Back   R/C Tech Forums > General Forums > Electric On-Road

    Hide Wikipost
Old 10-28-2016, 12:43 PM   -   Wikipost
R/C Tech Forums Thread Wiki: 1/12 forum
Please read: This is a community-maintained wiki post containing the most important information from this thread. You may edit the Wiki once you have been a member for 90 days and have made 90 posts.
 
Last edit by: fenton06
This is a place to share knowledge related to 1/12th scale racing. It is not to be used for conversations.

KITS:
Click links to go to manufacturer product page. If any are missing please add them!

TIRES:
Pre-mounted tires readily available in the US:
Pre-mounted tires readily available in the Europe:
  • Hot Race ??

Gluing your own donuts:
https://www.youtube.com/watch?v=hm7z1rz-74s - Special thanks to Edward Pickering!
Truing tires:
https://www.youtube.com/watch?v=8wqHOLWq6Uc - Special thanks to Edward Pickering!

The following information came from HERE, with some editing and information added. Thanks Christian!

THIS MAY NEED UPDATING FOR THE NEW BLACK CRC CARPET

Brands:
BSR, CRC, Jaco:
Pro One is no longer selling to the public, but it and the brands above are all mounted by BSR and use the same foam. The nomenclature of the BSR vs Jaco/CRC is a little different in a few instances but is otherwise the same. The BSR foam consists of three families, and can be identifed as synthetics, naturals, and blends.

Synthetics - The old school, light weight, easy to true "dry feeling" tires. These include tires like CRC/Jaco Yellow (BSR White), Black, Gray, etc. These tires offer the highest wear rate and lowest grip. Many racers continue to use these nder high bite conditions.

Naturals - These tires are usually the best alternative for low bite and asphalt. They include Pink, Magenta, Double Pink, Lilac (BSR Team Purple), Purple, and other tires. These tires provide a ton of grip, but tend to get sticky in high bite conditions. This rubber does not wear as easily, and the cars will pick up gunk and fibers from the carpet under most high bite conditions. This is especially bad if the humidity is high.

Blends - These are the tires most people run today. They were initially called "JFT foam" by some, as it was believed that the tires were the same as the JFT tires. We can divide the blends further into two groups: high rubber and low rubber content. The high rubber would be the new rear Orange and Red from the BSR family, and the low rubber would be the Green and Blue varieties. When, asked about the difference, John Foister from BSR Tires said they came from the same "family" of foam, but they offered different grip. According to John, the Green/Blue has more bite than Orange/Red, but from track testing Oranges offer more bite than Green (being equivalent to in hardness) when the grip is high and absolutely no grip when it is lower. The Orange foam has a denser pore structure and the tire is not as prone to chunking. It is also important to note is that BSR Blue rears are not the same as the BSR Blue fronts!

JFT:
JFT stands for Japan Foam Tire. They started the new wave of foam tires we are all using now (Blue/Blu, Green/Greene, Dbl Blue, etc). These tires are a little different than the BSR tire family, but work in very similar conditions. They offers four varieties A (asphalt), C (carpet), S (???), and R (???). This does not mean that those types only work on that surface, but this is what they recommend.

JFT uses the same foam for fronts and rears if the color is the same.

A: Used on asphalt, considered close to the natural rubber variety and are named consistently with other natural tires.
C: Used on carpet, considered a blend.
S: Used on carpet?, tires are ???
R: Used on carpet?, tires are ???

For setup, the JFT foam seem to generate more bite than the BSR, therefore the car tends to be a little more aggressive.

Ulti:
Ulti is another Japanese brand that offers an array of compounds. They have their own way of rating tires, and are difficult to equate to other brands. They have 4 different varieties, each in varying degrees of hardness.

J: High rubber content tire, similar to Pink/ Magenta. Soft would be close to a pink. These offer the most bite and are great for asphalt/carpet front tire. (J hard being very popular)
X: "Balanced" blend, similar to JFT Blue/ Green. Soft is equivalent to Green, medium to Blue in hardness. Great for carpet!
Y: High synthetic blend with lower grip, and is not a very popular variety.
Z: A very expensive "special" foam that is supposed to be magic on asphalt. Only make it in soft shore.
European tires:
There are many great European foam tire brands that use their own types of foam, as well as traditional foams. SOmeone with more knowledge about them will need to fill this in!

Tire Diameter:
If you are racing on carpet, you have to evaluate how much grip your track has. If your track is low to medium grip, you can run bigger tires. If you are on higher bite you have to cut them smaller, there is simply no way around it. Bigger tires are needed for asphalt, especially in the rear. The larger tires provide much needed lateral bite.

Carpet (mm):
Low - Medium Bite
Front: 42.0 - 42.5
Rear: 42.5 - 43.00
Medium - High Bite
Front: 40.5 - 41.0
Rear: 41.5 - 42.0
Big Race
Front: 39.5 - 40.0
Rear: 40.5 - 41.0
Asphalt (mm):
Parking Lot
Front: 43.0 - 44.0
Rear: 44.0 - 45.0
Prepped High Bite
Front: 42.0 - 43.0
Rear: 43.0 - 44.0

Tire Saucing:
Most facilities have moved towards odorless traction additives such as SXT. Some of additives evaporate very quickly and some do not. This seems to be something that is also dependent on tire compound and ambient temperature. For example, saucing a Green compound seems like it never dries, especially when tjhe temperature is lower. We have found that wiping the tires off 15 minutes before we go run allows the sauce to cure, which makes the car come in much quicker with Green rears. Blue compounds on the other hand, do fine when wiped off right before hitting the track.

Saucing half front and full rear is a good initial starting point. If the front of the car is too agressive you can sauce les than half, or for a shorter amount of time.
Tire Fuzzing:
In conditions of increasing grip, foam tires will somewtimes get sticky and pick up fuzz and debris from the track. This is highly dependent on the rubber sedan tire that is being run at your local track and the compound/ type of foam you are running on you car. The softer the sedan tire and the harder/higher rubber content in your foam tire, trouble with fuzzing seems more likely to occur.

There are ways to get around fuzzing under most conditions, and usually involves the selection of the correct foam compound. The more fuzz you get, the softer/lower rubber content you want to run.

Examples:
Problem: Car fuzzes with Lilac/Team Purple fronts and car starts pushing.
Solution: Use a softer front tire and or different family of foam. Replace it with Blue or Double Blue front.

Problem: Car loses rear bite 6 minutes into the run. Blue rear tires look almost clean but have small carpet hairs.
Solution: Use Green rear tires. The softer compound wears instead of getting sticky, minimizing fuzz.

Tire Selection:
Starting out, pick 2 tire compounds for the front and rear. The following should have you covered 99% of the time.

Front - Green and Blue (BSR) or Green and Light Blue (JFT)
Rear - Blue and Double Blue (BSR) or Blue and Dark Blue (JFT)

You may wonder about other compounds out there and if they might be better, trust me, they probably won't be. Even if there are other tires that can be as fast, the synthetic family wears out really fast and the high natural rubber will probably fuzz on you over an 8 minute run. The blends family seems to be the most versatile foam type available today. They last awhile, and sticking to them will make your process of tire selection simpler.
Tire Charts:
BSR/CRC/Jaco



Contact



Corally



JFT (Japan Foam Tire)



Ulti



Enneti (Xceed)



ELECTRONICS:
ESC:
As of now, ROAR is staying 1S (3.7V nominal; 4.2V fully charged) for 1/12. There are many 1S ESC's with a built in BEC so nothing else is required to power the receiver and servo.

If you don't want to lock yourself into a 1S specific ESC, you do have other options! It is possible to use your 2S ESC without a booster or receiver pack, and the ESC simply supplies the lower voltage. If that does not appeal to you, you will need to use an Rx pack or booster. The Rx pack and booster will both supply the receiver with a higher voltage than the 1S pack.

If you decide to use an Rx pack, MAKE SURE TO REMOVE THE RED WIRE FROM THE ESC PLUG THAT GOES INTO THE RECEIVER!!!

If you choose to use a voltage booster, it works exactly how it sounds. Instead of plugging the ESC into the receiver, it plugs into the booster, and the booster plug goes to the ESC, supplying the higher voltage.

1S ESC:
If there are any missing please add them!!

If anyone would like a need for a chart comparing the ESC's specs PM fenton06 and I'll get one made and put in here!
Voltage Boosters:
If there are any missing please add them!
Servos:
BODIES:
Black Art (CRC - US Dist):
  • Audi R8C - BA002 - .020 Thick



  • Black Market (Mohawk 12) - BA005 - .020



  • Lola B10 - BA006 - .020 thick
  • Toyota TS030 - BA008 - .020 thick

    Lola - black/red, TS030 - green/pink


PROTOForm:

Reflex Racing/RSD:

SUSPENSION ADJUSTMENTS:

Print Wikipost

Reply
 
Thread Tools Search this Thread
Old 08-18-2006, 06:59 PM   #19996
Tech Lord
 
protc3's Avatar
 
Join Date: Jun 2003
Location: Spring Hill,Florida
Posts: 10,813
Trader Rating: 13 (100%+)
Default

ok,

Adrian is a punk and went to a culture club concert.he rushed the stage and got slapped by boy george!!!!!!!!
__________________
Jason Breiner
BMI Racing
Team Associated
J Concepts
protc3 is offline   Reply With Quote
Old 08-18-2006, 07:48 PM   #19997
Tech Elite
 
odpurple's Avatar
 
Join Date: Dec 2002
Location: San Francisco
Posts: 2,187
Default

TOASTY!!
__________________
TOP Racing USA--OD Racing--Novak--Power Push--J Spec
odpurple is offline   Reply With Quote
Old 08-18-2006, 09:06 PM   #19998
Tech Fanatic
 
fast-ho-cars's Avatar
 
Join Date: Sep 2003
Location: it's a dry heat
Posts: 784
Default

Quote:
Originally Posted by protc3
and adrian,NO ONE could touch my KD at Minreg in my touring car.fresh motor before mags dropped.i was accused of running a mod arm in that motor by everyone including PW,dobbs,butter,art,steve or whoever saw it run.no orion,checkpoint or whatever was as fast that day.

i have been using the K19 at a track that runs a nitro sedan class and a 19T class twice against reedy 19quads, trinity D5 with timing cranked, checkpoint money 19's and have dominated hands down on speed. each time having my car looked at and a barage of questions.

on a huge track 2 weeks ago in the main i out qualed 2nd by 3 aps with 42 and went 44 in the main to win. BTW winner of the nitro class won with 39. needless to say my car was looked at again with lots of questions. from the electric and gas guys.

the track i raced at doesn't allow any winds below 19t. (think they do that on purpose) they told once when i first showed that sometimes the electrics come close or match the laps of a gas sedan, they boast that gas is the fastest way to go....i have been killing that bragadatio fast.
fast-ho-cars is offline   Reply With Quote
Old 08-18-2006, 09:32 PM   #19999
Tech Lord
 
protc3's Avatar
 
Join Date: Jun 2003
Location: Spring Hill,Florida
Posts: 10,813
Trader Rating: 13 (100%+)
Default

theres nothing like woopin up on the gas guys. nice run buddy
__________________
Jason Breiner
BMI Racing
Team Associated
J Concepts
protc3 is offline   Reply With Quote
Old 08-18-2006, 09:34 PM   #20000
Tech Champion
 
AdrianM's Avatar
 
Join Date: Aug 2001
Location: Tampa, FL
Posts: 5,914
Trader Rating: 4 (100%+)
Default

Quote:
Originally Posted by protc3
ok,

Adrian is a punk and went to a culture club concert.he rushed the stage and got slapped by boy george!!!!!!!!
1. My car is better...your motors are (were) faster.

2. It was a Dead or Alive concert and I got slapped during a rippin' live verison of "You spin me Right Round"

__________________
Adrian Martinez
What I run: Schumacher Mi5/Associated RC10R5.1/Associated RC12R5.2/Futaba/HobbyWing/Team EA Motorsports/BSR Racing
Where I run: Florida Indoor R/C Complex/Thunder Racing/Florida On Road State Series
AdrianM is offline   Reply With Quote
Old 08-19-2006, 03:58 AM   #20001
Tech Elite
 
RED-LINE M03's Avatar
 
Join Date: Jun 2005
Location: >>> USA <<<
Posts: 4,102
Trader Rating: 127 (100%+)
Default LOL

Quote:
Originally Posted by protc3
ok,

Adrian is a punk and went to a culture club concert.he rushed the stage and got slapped by boy george!!!!!!!!

Do you really want to hurt me. Do you really want to make Adrian cry
RED-LINE M03 is offline   Reply With Quote
Old 08-19-2006, 05:05 AM   #20002
Tech Lord
 
protc3's Avatar
 
Join Date: Jun 2003
Location: Spring Hill,Florida
Posts: 10,813
Trader Rating: 13 (100%+)
Default

Quote:
Originally Posted by AdrianM
1. My car is better...your motors are (were) faster.

2. It was a Dead or Alive concert and I got slapped during a rippin' live verison of "You spin me Right Round"


man,this is gonna be a race from hell.let me count adrian's excuses now and see how far off i am.

its still not as bad as the jack wagner "all i need tour" you flew over to europe for.and hell,cant forget the WHAM reunion concert where you sang on stage withe george michael.

talk to you during the week bro.im sure it will be interesting.
__________________
Jason Breiner
BMI Racing
Team Associated
J Concepts
protc3 is offline   Reply With Quote
Old 08-19-2006, 06:44 AM   #20003
Tech Fanatic
 
Kevin Boyle's Avatar
 
Join Date: Aug 2005
Posts: 997
Default

Calling Dave Todd,

Need to talk about some 12th scale motors

Kevin Boyle
Kevin Boyle is offline   Reply With Quote
Old 08-19-2006, 12:24 PM   #20004
Tech Elite
 
dr_hfuhuhurr's Avatar
 
Join Date: Aug 2003
Location: Westchester, NY
Posts: 4,422
Trader Rating: 69 (100%+)
Default

What's your guys opinion of the Atlas 19t? I ran one in TC and thought it was a rocket. I'd like to run 19t 1/12th if I can get a class locally here.

Atlas 19t
http://integy.automated-shops.com/cg...50106380907.06
__________________
"There is a fine line between hobby and mental illness. Which side are you on?"

“Life is hard; it's harder if you're stupid.” - John Wayne
dr_hfuhuhurr is offline   Reply With Quote
Old 08-19-2006, 03:04 PM   #20005
Tech Champion
 
Scottrik's Avatar
 
Join Date: Sep 2004
Location: Billings, MT
Posts: 6,122
Trader Rating: 238 (100%+)
Default Ceramic bearings

OK guys...ceramic bearings, yea or nay? Starting to build my cars for the upcoming season and interested in input.

How about for motors, worthwhile or no?

Scottrik
Scottrik is offline   Reply With Quote
Old 08-19-2006, 03:08 PM   #20006
Tech Addict
 
Join Date: Jun 2006
Posts: 632
Trader Rating: 3 (100%+)
Default

ceramic is the shit. i ran ceramics in my mini inferno and i didnt have to replace them or even lube them in 6 months. i didnt use them in my motors but if you realy want to use them go to Bocabearings.com i dont think they are nessecary but who doesnt like having less maintenance??

Matt
mat3833 is offline   Reply With Quote
Old 08-19-2006, 06:37 PM   #20007
Tech Master
 
burgboyz's Avatar
 
Join Date: Jan 2005
Location: Da 'Burg
Posts: 1,247
Trader Rating: 70 (100%+)
Default

Quote:
Originally Posted by Scottrik
OK guys...ceramic bearings, yea or nay? Starting to build my cars for the upcoming season and interested in input.

How about for motors, worthwhile or no?

Scottrik
I like the ceramic bearing package that I buy from MURDOCK RC in Iowa.
http://members.willinet.net/bmurdock/MURDOCKRC/
The part #wt2700. Complete 12th set plus diff balls for only $35
He is a good guy that sells good stuff!!
Build a diff with ceramic balls & bearings and it will be smoother longer!!
__________________
Got Droop???
Speed Passion....Speed Power....Serpent America/Desoto Racing.
burgboyz is offline   Reply With Quote
Old 08-19-2006, 08:14 PM   #20008
Tech Champion
 
Scottrik's Avatar
 
Join Date: Sep 2004
Location: Billings, MT
Posts: 6,122
Trader Rating: 238 (100%+)
Default

Burg--have you tried the 1/12 front springs Murdock sells? I like the idea of color-coded and I'd like to try the .016 springs to see if that helps stick the front of my car or not. I had kept their site when it was mentioned last winter as a good source for the ceramic bearings.

Scottrik
Scottrik is offline   Reply With Quote
Old 08-19-2006, 08:50 PM   #20009
Tech Champion
 
JayBee's Avatar
 
Join Date: Mar 2004
Location: 12TH-MAN COUNTRY
Posts: 6,803
Trader Rating: 31 (100%+)
Default

I've been working on my 'Blu-Spank'r' all week ...
__________________
R C 3 G R A F I X _ F U S I O N . G R A P H I X _ S E A T T L E - R/C - R A C E R S _ E M E R A L D C I T Y R C . C O M

A E - 12R5.2 _ S M - REV8 PRO

Last edited by JayBee; 09-12-2008 at 10:33 PM.
JayBee is offline   Reply With Quote
Old 08-19-2006, 09:47 PM   #20010
Tech Lord
 
protc3's Avatar
 
Join Date: Jun 2003
Location: Spring Hill,Florida
Posts: 10,813
Trader Rating: 13 (100%+)
Default

Quote:
Originally Posted by Scottrik
Burg--have you tried the 1/12 front springs Murdock sells? I like the idea of color-coded and I'd like to try the .016 springs to see if that helps stick the front of my car or not. I had kept their site when it was mentioned last winter as a good source for the ceramic bearings.

Scottrik
stick with .020.if you want to stick the front better try some AE diff lube on the kingpins.this helps alot..016 front springs will collapse in no time.
__________________
Jason Breiner
BMI Racing
Team Associated
J Concepts
protc3 is offline   Reply With Quote
Reply

Similar Threads
Thread Thread Starter Forum Replies Last Post
New to the forum mig rod Electric Off-Road 1 01-05-2008 05:23 PM
hi i need help and im new to the forum racer4 Rookie Zone 4 01-21-2007 02:37 PM
Why is this forum listed under the On Road Forum? sport10 Onroad Nitro Engine Zone 0 01-11-2007 08:06 AM
Forum Changes... futureal Wisconsin & Illinois Racing 3 10-28-2002 09:26 PM



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off



All times are GMT -7. It is currently 03:19 AM.


Powered By: vBulletin v3.9.2.1
Privacy Policy | Terms of Use | Advertise Content © 2001-2011 RCTech.net

SEO by vBSEO 3.5.0