R/C Tech Forums

Go Back   R/C Tech Forums > General Forums > Electric On-Road

    Hide Wikipost
Old 10-28-2016, 12:43 PM   -   Wikipost
R/C Tech Forums Thread Wiki: 1/12 forum
Please read: This is a community-maintained wiki post containing the most important information from this thread. You may edit the Wiki once you have been a member for 90 days and have made 90 posts.
 
Last edit by: fenton06
This is a place to share knowledge related to 1/12th scale racing. It is not to be used for conversations.

KITS:
Click links to go to manufacturer product page. If any are missing please add them!

TIRES:
Pre-mounted tires readily available in the US:
Pre-mounted tires readily available in the Europe:
  • Hot Race ??

Gluing your own donuts:
https://www.youtube.com/watch?v=hm7z1rz-74s - Special thanks to Edward Pickering!
Truing tires:
https://www.youtube.com/watch?v=8wqHOLWq6Uc - Special thanks to Edward Pickering!

The following information came from HERE, with some editing and information added. Thanks Christian!

THIS MAY NEED UPDATING FOR THE NEW BLACK CRC CARPET

Brands:
BSR, CRC, Jaco:
Pro One is no longer selling to the public, but it and the brands above are all mounted by BSR and use the same foam. The nomenclature of the BSR vs Jaco/CRC is a little different in a few instances but is otherwise the same. The BSR foam consists of three families, and can be identifed as synthetics, naturals, and blends.

Synthetics - The old school, light weight, easy to true "dry feeling" tires. These include tires like CRC/Jaco Yellow (BSR White), Black, Gray, etc. These tires offer the highest wear rate and lowest grip. Many racers continue to use these nder high bite conditions.

Naturals - These tires are usually the best alternative for low bite and asphalt. They include Pink, Magenta, Double Pink, Lilac (BSR Team Purple), Purple, and other tires. These tires provide a ton of grip, but tend to get sticky in high bite conditions. This rubber does not wear as easily, and the cars will pick up gunk and fibers from the carpet under most high bite conditions. This is especially bad if the humidity is high.

Blends - These are the tires most people run today. They were initially called "JFT foam" by some, as it was believed that the tires were the same as the JFT tires. We can divide the blends further into two groups: high rubber and low rubber content. The high rubber would be the new rear Orange and Red from the BSR family, and the low rubber would be the Green and Blue varieties. When, asked about the difference, John Foister from BSR Tires said they came from the same "family" of foam, but they offered different grip. According to John, the Green/Blue has more bite than Orange/Red, but from track testing Oranges offer more bite than Green (being equivalent to in hardness) when the grip is high and absolutely no grip when it is lower. The Orange foam has a denser pore structure and the tire is not as prone to chunking. It is also important to note is that BSR Blue rears are not the same as the BSR Blue fronts!

JFT:
JFT stands for Japan Foam Tire. They started the new wave of foam tires we are all using now (Blue/Blu, Green/Greene, Dbl Blue, etc). These tires are a little different than the BSR tire family, but work in very similar conditions. They offers four varieties A (asphalt), C (carpet), S (???), and R (???). This does not mean that those types only work on that surface, but this is what they recommend.

JFT uses the same foam for fronts and rears if the color is the same.

A: Used on asphalt, considered close to the natural rubber variety and are named consistently with other natural tires.
C: Used on carpet, considered a blend.
S: Used on carpet?, tires are ???
R: Used on carpet?, tires are ???

For setup, the JFT foam seem to generate more bite than the BSR, therefore the car tends to be a little more aggressive.

Ulti:
Ulti is another Japanese brand that offers an array of compounds. They have their own way of rating tires, and are difficult to equate to other brands. They have 4 different varieties, each in varying degrees of hardness.

J: High rubber content tire, similar to Pink/ Magenta. Soft would be close to a pink. These offer the most bite and are great for asphalt/carpet front tire. (J hard being very popular)
X: "Balanced" blend, similar to JFT Blue/ Green. Soft is equivalent to Green, medium to Blue in hardness. Great for carpet!
Y: High synthetic blend with lower grip, and is not a very popular variety.
Z: A very expensive "special" foam that is supposed to be magic on asphalt. Only make it in soft shore.
European tires:
There are many great European foam tire brands that use their own types of foam, as well as traditional foams. SOmeone with more knowledge about them will need to fill this in!

Tire Diameter:
If you are racing on carpet, you have to evaluate how much grip your track has. If your track is low to medium grip, you can run bigger tires. If you are on higher bite you have to cut them smaller, there is simply no way around it. Bigger tires are needed for asphalt, especially in the rear. The larger tires provide much needed lateral bite.

Carpet (mm):
Low - Medium Bite
Front: 42.0 - 42.5
Rear: 42.5 - 43.00
Medium - High Bite
Front: 40.5 - 41.0
Rear: 41.5 - 42.0
Big Race
Front: 39.5 - 40.0
Rear: 40.5 - 41.0
Asphalt (mm):
Parking Lot
Front: 43.0 - 44.0
Rear: 44.0 - 45.0
Prepped High Bite
Front: 42.0 - 43.0
Rear: 43.0 - 44.0

Tire Saucing:
Most facilities have moved towards odorless traction additives such as SXT. Some of additives evaporate very quickly and some do not. This seems to be something that is also dependent on tire compound and ambient temperature. For example, saucing a Green compound seems like it never dries, especially when tjhe temperature is lower. We have found that wiping the tires off 15 minutes before we go run allows the sauce to cure, which makes the car come in much quicker with Green rears. Blue compounds on the other hand, do fine when wiped off right before hitting the track.

Saucing half front and full rear is a good initial starting point. If the front of the car is too agressive you can sauce les than half, or for a shorter amount of time.
Tire Fuzzing:
In conditions of increasing grip, foam tires will somewtimes get sticky and pick up fuzz and debris from the track. This is highly dependent on the rubber sedan tire that is being run at your local track and the compound/ type of foam you are running on you car. The softer the sedan tire and the harder/higher rubber content in your foam tire, trouble with fuzzing seems more likely to occur.

There are ways to get around fuzzing under most conditions, and usually involves the selection of the correct foam compound. The more fuzz you get, the softer/lower rubber content you want to run.

Examples:
Problem: Car fuzzes with Lilac/Team Purple fronts and car starts pushing.
Solution: Use a softer front tire and or different family of foam. Replace it with Blue or Double Blue front.

Problem: Car loses rear bite 6 minutes into the run. Blue rear tires look almost clean but have small carpet hairs.
Solution: Use Green rear tires. The softer compound wears instead of getting sticky, minimizing fuzz.

Tire Selection:
Starting out, pick 2 tire compounds for the front and rear. The following should have you covered 99% of the time.

Front - Green and Blue (BSR) or Green and Light Blue (JFT)
Rear - Blue and Double Blue (BSR) or Blue and Dark Blue (JFT)

You may wonder about other compounds out there and if they might be better, trust me, they probably won't be. Even if there are other tires that can be as fast, the synthetic family wears out really fast and the high natural rubber will probably fuzz on you over an 8 minute run. The blends family seems to be the most versatile foam type available today. They last awhile, and sticking to them will make your process of tire selection simpler.
Tire Charts:
BSR/CRC/Jaco



Contact



Corally



JFT (Japan Foam Tire)



Ulti



Enneti (Xceed)



ELECTRONICS:
ESC:
As of now, ROAR is staying 1S (3.7V nominal; 4.2V fully charged) for 1/12. There are many 1S ESC's with a built in BEC so nothing else is required to power the receiver and servo.

If you don't want to lock yourself into a 1S specific ESC, you do have other options! It is possible to use your 2S ESC without a booster or receiver pack, and the ESC simply supplies the lower voltage. If that does not appeal to you, you will need to use an Rx pack or booster. The Rx pack and booster will both supply the receiver with a higher voltage than the 1S pack.

If you decide to use an Rx pack, MAKE SURE TO REMOVE THE RED WIRE FROM THE ESC PLUG THAT GOES INTO THE RECEIVER!!!

If you choose to use a voltage booster, it works exactly how it sounds. Instead of plugging the ESC into the receiver, it plugs into the booster, and the booster plug goes to the ESC, supplying the higher voltage.

1S ESC:
If there are any missing please add them!!

If anyone would like a need for a chart comparing the ESC's specs PM fenton06 and I'll get one made and put in here!
Voltage Boosters:
If there are any missing please add them!
Servos:
BODIES:
Black Art (CRC - US Dist):
  • Audi R8C - BA002 - .020 Thick



  • Black Market (Mohawk 12) - BA005 - .020



  • Lola B10 - BA006 - .020 thick
  • Toyota TS030 - BA008 - .020 thick

    Lola - black/red, TS030 - green/pink


PROTOForm:

Reflex Racing/RSD:

SUSPENSION ADJUSTMENTS:

Print Wikipost

Reply
 
Thread Tools Search this Thread
Old 07-27-2006, 10:45 AM   #19576
Tech Elite
 
itchy b's Avatar
 
Join Date: Apr 2006
Location: In My Man Cave
Posts: 4,144
Trader Rating: 2 (100%+)
Default

Quote:
Originally Posted by Yeti35
Tape is for packages!!
well i'm packing
__________________
-Blitz-Rallyhawk-EX 1.5R-Xpress-P64 Tyrrell-Lotus79-Espirit VTA
EX1.5-SC10 4x4
itchy b is offline   Reply With Quote
Old 07-27-2006, 11:09 AM   #19577
Tech Elite
 
SOLOARTIST 702's Avatar
 
Join Date: Jan 2006
Location: WORLD WIDE
Posts: 3,388
Send a message via AIM to SOLOARTIST 702
Default crc

is there good support for 1/12 scale as far as helping people like me im a
__________________
RC AMERICA / XRAY / HUDY/ MATRIX TIRES /KOPROPO / ORCAN GT3 /RED CUP RACING MEMBER / SPEEWORLD RACEWAY/ A+ performance parts /IVE SEEN THE XRAY TEAM DRIVE SO I GOT XRAY CARS / better to keep up than to catch up

WILLIAM PENDERGRASS

Last edited by SOLOARTIST 702; 12-25-2010 at 10:22 AM.
SOLOARTIST 702 is offline   Reply With Quote
Old 07-27-2006, 11:24 AM   #19578
Tech Elite
 
speedxl's Avatar
R/C Tech Charter Subscriber
 
Join Date: Jun 2003
Location: Portland Oregon.
Posts: 3,876
Default

Quote:
Originally Posted by SOLOARTIST 702
is there good support for 1/12 scale as far as helping people like me im a
That's what everyone is on here for questions and answer's.

See you got your first question answered already!
__________________
Pemberton / R1 / All out motorsports / Team Power Push
speedxl is offline   Reply With Quote
Old 07-27-2006, 12:19 PM   #19579
Tech Addict
 
carkillaii's Avatar
 
Join Date: Jan 2004
Location: Las Vegas
Posts: 670
Default

Quote:
Originally Posted by SOLOARTIST 702
is there good support for 1/12 scale as far as helping people like me im a
Will you ready for one
carkillaii is offline   Reply With Quote
Old 07-27-2006, 03:10 PM   #19580
Tech Elite
 
SOLOARTIST 702's Avatar
 
Join Date: Jan 2006
Location: WORLD WIDE
Posts: 3,388
Send a message via AIM to SOLOARTIST 702
Default hmm

Quote:
Originally Posted by carkillaii
Will you ready for one
going to look at one 2nite
__________________
RC AMERICA / XRAY / HUDY/ MATRIX TIRES /KOPROPO / ORCAN GT3 /RED CUP RACING MEMBER / SPEEWORLD RACEWAY/ A+ performance parts /IVE SEEN THE XRAY TEAM DRIVE SO I GOT XRAY CARS / better to keep up than to catch up

WILLIAM PENDERGRASS
SOLOARTIST 702 is offline   Reply With Quote
Old 07-27-2006, 03:49 PM   #19581
Tech Lord
 
protc3's Avatar
 
Join Date: Jun 2003
Location: Spring Hill,Florida
Posts: 10,813
Trader Rating: 13 (100%+)
Default

hey adrian,proto DB12 ready to go brutha.
Attached Thumbnails
1/12 forum-db12-pic.jpg   1/12 forum-db12-pic1.jpg   1/12 forum-db12-pic-2.jpg  
__________________
Jason Breiner
BMI Racing
Team Associated
J Concepts
protc3 is offline   Reply With Quote
Old 07-27-2006, 04:14 PM   #19582
Tech Champion
 
danjoy25's Avatar
R/C Tech Charter Subscriber
 
Join Date: Oct 2003
Posts: 5,126
Trader Rating: 37 (100%+)
Default

Guys,

I have the IRS spacers coming and a few other bits. I just realised being a newbie that I still need shims to adjust the front end. Would using anytype of washer/spacers be sufficient to do the job.

Can anyone also recommend atleast 3 pinion gears to have using a 72 tooth spur (48 pitch) using a KR 10 double motor?
__________________
Top Racing Photon EX / Mugen MTX-5 / Tamiya M05 / 3 Racing FGX & F113 / Kyosho RB5

Western Zydney Racers (Mini-Z Racing in the west)
http://www.rctech.net/forum/australian-racing/658918-1-28-scale-sydney-racing.html
danjoy25 is offline   Reply With Quote
Old 07-27-2006, 04:15 PM   #19583
Tech Master
 
rcgen's Avatar
 
Join Date: Feb 2004
Location: Jacksonville, FL
Posts: 1,069
Default

I've only ran 1/12 scale on asphault. I am thinking about running at a carpet track next weekend. Advice on tires would be real helpfull.
rcgen is offline   Reply With Quote
Old 07-27-2006, 04:31 PM   #19584
Tech Lord
 
protc3's Avatar
 
Join Date: Jun 2003
Location: Spring Hill,Florida
Posts: 10,813
Trader Rating: 13 (100%+)
Default

Quote:
Originally Posted by rcgen
I've only ran 1/12 scale on asphault. I am thinking about running at a carpet track next weekend. Advice on tires would be real helpfull.

purple front grey rears,white rears black fronts,double pink front and rear.this is all i usually mess with depending on the motor i run and the amount of traction
__________________
Jason Breiner
BMI Racing
Team Associated
J Concepts
protc3 is offline   Reply With Quote
Old 07-27-2006, 04:35 PM   #19585
Tech Lord
 
protc3's Avatar
 
Join Date: Jun 2003
Location: Spring Hill,Florida
Posts: 10,813
Trader Rating: 13 (100%+)
Default

Quote:
Originally Posted by danjoy25
Guys,

I have the IRS spacers coming and a few other bits. I just realised being a newbie that I still need shims to adjust the front end. Would using anytype of washer/spacers be sufficient to do the job.

Can anyone also recommend atleast 3 pinion gears to have using a 72 tooth spur (48 pitch) using a KR 10 double motor?

CRC has nice shims for under the arms from what i was told.the teflon castor shims that come with the kit is all you will need unless you want to upgrade them also to the CRC ones.the kingpin shims usually come with the car but if you need em AE sells them.as far as gearing,we will need your tire size to give you a good ballpark gearing.
__________________
Jason Breiner
BMI Racing
Team Associated
J Concepts
protc3 is offline   Reply With Quote
Old 07-27-2006, 04:42 PM   #19586
Tech Champion
 
danjoy25's Avatar
R/C Tech Charter Subscriber
 
Join Date: Oct 2003
Posts: 5,126
Trader Rating: 37 (100%+)
Default

I know i'll get shot but I will be running out of the box tyres . My kit was purchase used so I dont have anything other than whats in the car. I was thinking of using the Tamiya wheel spacers as they comes in 0.5 and 1 mm thickness and are also anodised.

So please suggest the biggest pinion I can run on that setup and then I will buy a few smaller ones for when the tyre diameter get smaller.
__________________
Top Racing Photon EX / Mugen MTX-5 / Tamiya M05 / 3 Racing FGX & F113 / Kyosho RB5

Western Zydney Racers (Mini-Z Racing in the west)
http://www.rctech.net/forum/australian-racing/658918-1-28-scale-sydney-racing.html
danjoy25 is offline   Reply With Quote
Old 07-27-2006, 04:47 PM   #19587
Tech Lord
 
protc3's Avatar
 
Join Date: Jun 2003
Location: Spring Hill,Florida
Posts: 10,813
Trader Rating: 13 (100%+)
Default

i would grab a 17,18,and 19 tooth pinion.maybe even a 20 for when your tires get smaller.AE has shims that are cheap for the rear axle and are very thin that allow for fine axle center adjustment.
__________________
Jason Breiner
BMI Racing
Team Associated
J Concepts

Last edited by protc3; 07-27-2006 at 06:56 PM.
protc3 is offline   Reply With Quote
Old 07-27-2006, 06:52 PM   #19588
Super Moderator
 
Marcos.J's Avatar
R/C Tech Elite Subscriber
 
Join Date: Sep 2003
Location: Semper Fi
Posts: 25,177
Trader Rating: 140 (100%+)
Default

Quote:
Originally Posted by protc3
hey adrian,proto DB12 ready to go brutha.
very nice Jason!! I like that motor
I got my DB12 ready too
Marcos.J is offline   Reply With Quote
Old 07-27-2006, 06:54 PM   #19589
Tech Lord
 
protc3's Avatar
 
Join Date: Jun 2003
Location: Spring Hill,Florida
Posts: 10,813
Trader Rating: 13 (100%+)
Default

thanks dude.im looking forward to sunday
__________________
Jason Breiner
BMI Racing
Team Associated
J Concepts
protc3 is offline   Reply With Quote
Old 07-27-2006, 06:57 PM   #19590
Super Moderator
 
Marcos.J's Avatar
R/C Tech Elite Subscriber
 
Join Date: Sep 2003
Location: Semper Fi
Posts: 25,177
Trader Rating: 140 (100%+)
Default

Quote:
Originally Posted by protc3
thanks dude.im looking forward to sunday
maybe you can break that 40 lap barrier
Marcos.J is offline   Reply With Quote
Reply

Similar Threads
Thread Thread Starter Forum Replies Last Post
New to the forum mig rod Electric Off-Road 1 01-05-2008 05:23 PM
hi i need help and im new to the forum racer4 Rookie Zone 4 01-21-2007 02:37 PM
Why is this forum listed under the On Road Forum? sport10 Onroad Nitro Engine Zone 0 01-11-2007 08:06 AM
Forum Changes... futureal Wisconsin & Illinois Racing 3 10-28-2002 09:26 PM



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off



All times are GMT -7. It is currently 10:10 PM.


Powered By: vBulletin v3.9.2.1
Privacy Policy | Terms of Use | Advertise Content © 2001-2011 RCTech.net

SEO by vBSEO 3.5.0