R/C Tech Forums

Go Back   R/C Tech Forums > General Forums > Electric On-Road

    Hide Wikipost
Old 10-28-2016, 12:43 PM   -   Wikipost
R/C Tech Forums Thread Wiki: 1/12 forum
Please read: This is a community-maintained wiki post containing the most important information from this thread. You may edit the Wiki once you have been a member for 90 days and have made 90 posts.
 
Last edit by: fenton06
This is a place to share knowledge related to 1/12th scale racing. It is not to be used for conversations.

KITS:
Click links to go to manufacturer product page. If any are missing please add them!

TIRES:
Pre-mounted tires readily available in the US:
Pre-mounted tires readily available in the Europe:
  • Hot Race ??

Gluing your own donuts:
https://www.youtube.com/watch?v=hm7z1rz-74s - Special thanks to Edward Pickering!
Truing tires:
https://www.youtube.com/watch?v=8wqHOLWq6Uc - Special thanks to Edward Pickering!

The following information came from HERE, with some editing and information added. Thanks Christian!

THIS MAY NEED UPDATING FOR THE NEW BLACK CRC CARPET

Brands:
BSR, CRC, Jaco:
Pro One is no longer selling to the public, but it and the brands above are all mounted by BSR and use the same foam. The nomenclature of the BSR vs Jaco/CRC is a little different in a few instances but is otherwise the same. The BSR foam consists of three families, and can be identifed as synthetics, naturals, and blends.

Synthetics - The old school, light weight, easy to true "dry feeling" tires. These include tires like CRC/Jaco Yellow (BSR White), Black, Gray, etc. These tires offer the highest wear rate and lowest grip. Many racers continue to use these nder high bite conditions.

Naturals - These tires are usually the best alternative for low bite and asphalt. They include Pink, Magenta, Double Pink, Lilac (BSR Team Purple), Purple, and other tires. These tires provide a ton of grip, but tend to get sticky in high bite conditions. This rubber does not wear as easily, and the cars will pick up gunk and fibers from the carpet under most high bite conditions. This is especially bad if the humidity is high.

Blends - These are the tires most people run today. They were initially called "JFT foam" by some, as it was believed that the tires were the same as the JFT tires. We can divide the blends further into two groups: high rubber and low rubber content. The high rubber would be the new rear Orange and Red from the BSR family, and the low rubber would be the Green and Blue varieties. When, asked about the difference, John Foister from BSR Tires said they came from the same "family" of foam, but they offered different grip. According to John, the Green/Blue has more bite than Orange/Red, but from track testing Oranges offer more bite than Green (being equivalent to in hardness) when the grip is high and absolutely no grip when it is lower. The Orange foam has a denser pore structure and the tire is not as prone to chunking. It is also important to note is that BSR Blue rears are not the same as the BSR Blue fronts!

JFT:
JFT stands for Japan Foam Tire. They started the new wave of foam tires we are all using now (Blue/Blu, Green/Greene, Dbl Blue, etc). These tires are a little different than the BSR tire family, but work in very similar conditions. They offers four varieties A (asphalt), C (carpet), S (???), and R (???). This does not mean that those types only work on that surface, but this is what they recommend.

JFT uses the same foam for fronts and rears if the color is the same.

A: Used on asphalt, considered close to the natural rubber variety and are named consistently with other natural tires.
C: Used on carpet, considered a blend.
S: Used on carpet?, tires are ???
R: Used on carpet?, tires are ???

For setup, the JFT foam seem to generate more bite than the BSR, therefore the car tends to be a little more aggressive.

Ulti:
Ulti is another Japanese brand that offers an array of compounds. They have their own way of rating tires, and are difficult to equate to other brands. They have 4 different varieties, each in varying degrees of hardness.

J: High rubber content tire, similar to Pink/ Magenta. Soft would be close to a pink. These offer the most bite and are great for asphalt/carpet front tire. (J hard being very popular)
X: "Balanced" blend, similar to JFT Blue/ Green. Soft is equivalent to Green, medium to Blue in hardness. Great for carpet!
Y: High synthetic blend with lower grip, and is not a very popular variety.
Z: A very expensive "special" foam that is supposed to be magic on asphalt. Only make it in soft shore.
European tires:
There are many great European foam tire brands that use their own types of foam, as well as traditional foams. SOmeone with more knowledge about them will need to fill this in!

Tire Diameter:
If you are racing on carpet, you have to evaluate how much grip your track has. If your track is low to medium grip, you can run bigger tires. If you are on higher bite you have to cut them smaller, there is simply no way around it. Bigger tires are needed for asphalt, especially in the rear. The larger tires provide much needed lateral bite.

Carpet (mm):
Low - Medium Bite
Front: 42.0 - 42.5
Rear: 42.5 - 43.00
Medium - High Bite
Front: 40.5 - 41.0
Rear: 41.5 - 42.0
Big Race
Front: 39.5 - 40.0
Rear: 40.5 - 41.0
Asphalt (mm):
Parking Lot
Front: 43.0 - 44.0
Rear: 44.0 - 45.0
Prepped High Bite
Front: 42.0 - 43.0
Rear: 43.0 - 44.0

Tire Saucing:
Most facilities have moved towards odorless traction additives such as SXT. Some of additives evaporate very quickly and some do not. This seems to be something that is also dependent on tire compound and ambient temperature. For example, saucing a Green compound seems like it never dries, especially when tjhe temperature is lower. We have found that wiping the tires off 15 minutes before we go run allows the sauce to cure, which makes the car come in much quicker with Green rears. Blue compounds on the other hand, do fine when wiped off right before hitting the track.

Saucing half front and full rear is a good initial starting point. If the front of the car is too agressive you can sauce les than half, or for a shorter amount of time.
Tire Fuzzing:
In conditions of increasing grip, foam tires will somewtimes get sticky and pick up fuzz and debris from the track. This is highly dependent on the rubber sedan tire that is being run at your local track and the compound/ type of foam you are running on you car. The softer the sedan tire and the harder/higher rubber content in your foam tire, trouble with fuzzing seems more likely to occur.

There are ways to get around fuzzing under most conditions, and usually involves the selection of the correct foam compound. The more fuzz you get, the softer/lower rubber content you want to run.

Examples:
Problem: Car fuzzes with Lilac/Team Purple fronts and car starts pushing.
Solution: Use a softer front tire and or different family of foam. Replace it with Blue or Double Blue front.

Problem: Car loses rear bite 6 minutes into the run. Blue rear tires look almost clean but have small carpet hairs.
Solution: Use Green rear tires. The softer compound wears instead of getting sticky, minimizing fuzz.

Tire Selection:
Starting out, pick 2 tire compounds for the front and rear. The following should have you covered 99% of the time.

Front - Green and Blue (BSR) or Green and Light Blue (JFT)
Rear - Blue and Double Blue (BSR) or Blue and Dark Blue (JFT)

You may wonder about other compounds out there and if they might be better, trust me, they probably won't be. Even if there are other tires that can be as fast, the synthetic family wears out really fast and the high natural rubber will probably fuzz on you over an 8 minute run. The blends family seems to be the most versatile foam type available today. They last awhile, and sticking to them will make your process of tire selection simpler.
Tire Charts:
BSR/CRC/Jaco



Contact



Corally



JFT (Japan Foam Tire)



Ulti



Enneti (Xceed)



ELECTRONICS:
ESC:
As of now, ROAR is staying 1S (3.7V nominal; 4.2V fully charged) for 1/12. There are many 1S ESC's with a built in BEC so nothing else is required to power the receiver and servo.

If you don't want to lock yourself into a 1S specific ESC, you do have other options! It is possible to use your 2S ESC without a booster or receiver pack, and the ESC simply supplies the lower voltage. If that does not appeal to you, you will need to use an Rx pack or booster. The Rx pack and booster will both supply the receiver with a higher voltage than the 1S pack.

If you decide to use an Rx pack, MAKE SURE TO REMOVE THE RED WIRE FROM THE ESC PLUG THAT GOES INTO THE RECEIVER!!!

If you choose to use a voltage booster, it works exactly how it sounds. Instead of plugging the ESC into the receiver, it plugs into the booster, and the booster plug goes to the ESC, supplying the higher voltage.

1S ESC:
If there are any missing please add them!!

If anyone would like a need for a chart comparing the ESC's specs PM fenton06 and I'll get one made and put in here!
Voltage Boosters:
If there are any missing please add them!
Servos:
BODIES:
Black Art (CRC - US Dist):
  • Audi R8C - BA002 - .020 Thick



  • Black Market (Mohawk 12) - BA005 - .020



  • Lola B10 - BA006 - .020 thick
  • Toyota TS030 - BA008 - .020 thick

    Lola - black/red, TS030 - green/pink


PROTOForm:

Reflex Racing/RSD:

SUSPENSION ADJUSTMENTS:

Print Wikipost

Reply
 
Thread Tools Search this Thread
Old 03-14-2006, 12:23 AM   #17701
Tech Elite
 
Mason's Avatar
 
Join Date: Oct 2004
Location: Ocala, Florida
Posts: 4,577
Default

asphalt season never ends in florida.. though there may be ice on the track in the morning lol

here's a few from sunday.



and

__________________
Mason McCombs
NewRed Hobbies & Indoor Facility
Off-Road, Dirt Oval, Crawlers & Pullers
Mason is offline   Reply With Quote
Old 03-14-2006, 02:51 AM   #17702
Tech Regular
 
EvilDriver's Avatar
 
Join Date: Feb 2004
Location: Indonesia
Posts: 356
Send a message via AIM to EvilDriver Send a message via Skype™ to EvilDriver
Default

Quote:
Originally Posted by mikecatts
hi all.
i see a lot of talk regarding which type of car.
What are peoples thoughts about the Hara..chassis conversion?
I really like mine.and there's a lot of dicussions on this threads 1/12 RS12G Atsushi Hara Replica
__________________
|Xcampus Team Driver |
|Tamiya | TRF | LRP | TEKIN | ORION | Sorex | Futaba| Echologygrafixx |Sweep |
EvilDriver is offline   Reply With Quote
Old 03-14-2006, 08:32 AM   #17703
Tech Master
 
wingman2's Avatar
 
Join Date: Dec 2005
Location: Tewkesbury, UK via Plymouth, UK.
Posts: 1,259
Default

Hi all, can anyone tell me what this chassis is and where you could get one from? Thanks, Chris.
Attached Thumbnails
1/12 forum-inline4cell.jpg  
wingman2 is offline   Reply With Quote
Old 03-14-2006, 09:14 AM   #17704
Moderator
 
Pro ten Holland's Avatar
 
Join Date: May 2003
Location: Druten/Holland (Europe)
Posts: 1,658
Trader Rating: 1 (100%+)
Default

Quote:
Originally Posted by wingman2
Hi all, can anyone tell me what this chassis is and where you could get one from? Thanks, Chris.
It's a german car called Hatzenbach (formerly known as Ascari). It is still in development.
__________________
http://www.rc-lemans.de/
Pro ten Holland is offline   Reply With Quote
Old 03-14-2006, 09:56 AM   #17705
Tech Addict
 
James35's Avatar
 
Join Date: Nov 2005
Location: Rochester, New York
Posts: 748
Trader Rating: 1 (100%+)
Default

You can also get a similar chassis and all of those red parts from CRC:
http://www.teamcrc.com/crc/modules.p...od&prodID=1102
James35 is offline   Reply With Quote
Old 03-14-2006, 10:20 AM   #17706
Tech Apprentice
 
Join Date: May 2005
Location: New Zealand
Posts: 94
Default

Quote:
Originally Posted by DPowell
Powell Racing Components is ready to announce another choice in the long standing T-bar vs. link car battle.
The 2006 PRC Rug Burn offers the best of both worlds. It is easy to drive and forgiving like a traditional T-bar car and has the ability to cut thru traffic and change direction very quickly like a link car.
The Rug Burn is based on a concept by Bruno Heremans of Belgium. Bruno understands car and suspension design and has written extensively on the subject.

The car pictured is cut from silver carbon fiber. Production Rug Burn kits will be cut from normal black carbon fiber but a few silver kits will be available on request.

PM or e-mail for more information.

D.P.

where do i get one, when can i get on, i want one
judge10tpt is offline   Reply With Quote
Old 03-14-2006, 10:22 AM   #17707
Tech Regular
 
Mike Schumacher's Avatar
 
Join Date: Nov 2005
Location: RC Madness, CT
Posts: 277
Trader Rating: 36 (100%+)
Default

Quote:
Originally Posted by James35
You can also get a similar chassis and all of those red parts from CRC:
http://www.teamcrc.com/crc/modules.p...od&prodID=1102
That's 1/10 chassis. This is 1/12 forum...
__________________
◄◄ ★ ☆ ★ ☆ ★ ☆ ★ ☆ ★ ☆ ★ ☆ ★ ☆ ★ ☆ ★ ☆ ★ ☆ ★ ☆ ★ ☆ ★ ☆ ★ ►►
Mike Schumacher is offline   Reply With Quote
Old 03-14-2006, 10:55 AM   #17708
Tech Master
 
wingman2's Avatar
 
Join Date: Dec 2005
Location: Tewkesbury, UK via Plymouth, UK.
Posts: 1,259
Default

Thanks Pro10Holland. I thought of trying to produce a chassis with the cells down the middle and thought before trying I would have a look to see if anyone else has done anything similar. Would you beleive that there is quite a few out there but I am wondering if its worth trying because none of the big players (AE, Trinity, Corally, etc) have made one. If you have any more info on that chassis, let me know if possible either on here or by pm. You don't happen to have, or know where I could get some pics of the Corally SP12V. This was a chassis that was produced about 10-12 years ago and never really took off. Again, any info would be appreciated! Cheers, Chris.
wingman2 is offline   Reply With Quote
Old 03-14-2006, 11:03 AM   #17709
Tech Apprentice
 
Join Date: May 2005
Location: Schiedam/Netherlands
Posts: 80
Default

the SP12V from Corally was my favourite 12 th scale car. From the beginning I started running that chassis it just felt superb. Made the A main at the worlds warm up race with it. You had to take time to set it up but once working, it was very Okee. Only disadvantage I can remember it was for a 12 th scale car heavy !!
Frans H is offline   Reply With Quote
Old 03-14-2006, 11:29 AM   #17710
Tech Addict
 
James35's Avatar
 
Join Date: Nov 2005
Location: Rochester, New York
Posts: 748
Trader Rating: 1 (100%+)
Default

Quote:
Originally Posted by Mike Schumacher
That's 1/10 chassis. This is 1/12 forum...
Woops. It's too bad CRC's website is really bad when it comes to descriptions and pictures.
James35 is offline   Reply With Quote
Old 03-14-2006, 11:33 AM   #17711
Tech Master
 
wingman2's Avatar
 
Join Date: Dec 2005
Location: Tewkesbury, UK via Plymouth, UK.
Posts: 1,259
Default

I used to run a SP12G2 for quite a while many years ago, when the 12V came out, I thought it looked good because the t bar was removed and had the pivots either side of the motor pod. You guys don't know where any are kicking about for sell? Cheers, Chris.
Attached Thumbnails
1/12 forum-sp12v.jpg  
wingman2 is offline   Reply With Quote
Old 03-14-2006, 12:39 PM   #17712
Moderator
 
Pro ten Holland's Avatar
 
Join Date: May 2003
Location: Druten/Holland (Europe)
Posts: 1,658
Trader Rating: 1 (100%+)
Default

Quote:
Originally Posted by wingman2
Thanks Pro10Holland. I thought of trying to produce a chassis with the cells down the middle and thought before trying I would have a look to see if anyone else has done anything similar. Would you beleive that there is quite a few out there but I am wondering if its worth trying because none of the big players (AE, Trinity, Corally, etc) have made one. If you have any more info on that chassis, let me know if possible either on here or by pm. You don't happen to have, or know where I could get some pics of the Corally SP12V. This was a chassis that was produced about 10-12 years ago and never really took off. Again, any info would be appreciated! Cheers, Chris.
Post your questions here:
http://www.moosi-masters.de/forum/vi...t=222&start=90
__________________
http://www.rc-lemans.de/
Pro ten Holland is offline   Reply With Quote
Old 03-14-2006, 12:52 PM   #17713
Tech Fanatic
 
Join Date: Jan 2004
Location: Colorado, Above The Rest
Posts: 992
Trader Rating: 2 (100%+)
Default

Quote:
Originally Posted by wingman2
Thanks Pro10Holland. I thought of trying to produce a chassis with the cells down the middle and thought before trying I would have a look to see if anyone else has done anything similar. Would you beleive that there is quite a few out there but I am wondering if its worth trying because none of the big players (AE, Trinity, Corally, etc) have made one. If you have any more info on that chassis, let me know if possible either on here or by pm. You don't happen to have, or know where I could get some pics of the Corally SP12V. This was a chassis that was produced about 10-12 years ago and never really took off. Again, any info would be appreciated! Cheers, Chris.
Darkside Motorsports is also producting one. It was recently released, we are working on a revision to the website showing the production version. contact us for more information.

www.darksidems.com
__________________
Team BSR
Team Power Push
Protoform Race Bodies
KSKT Racing - #1 in SK Racing Chassis
Darkside Motorsports - "WE ARE WHAT'S NEXT." - www.darksidems.com
THE DARKSIDE is offline   Reply With Quote
Old 03-14-2006, 01:08 PM   #17714
Tech Addict
 
acyrier's Avatar
R/C Tech Charter Subscriber
 
Join Date: Oct 2003
Location: Indiana
Posts: 569
Trader Rating: 7 (100%+)
Send a message via AIM to acyrier
Default

Can ya post a couple pics here? (And none of them baby pics..big'ons!) :-)
__________________
The products and places I support.
www.michianarc.com www.facebook.com/michianarc - www.russellrc.com
www.teamtekin.com - www.teamcrc.com - www.teamassociated.com
www.fantomracing.com - www.discountrcstore.com
acyrier is offline   Reply With Quote
Old 03-14-2006, 01:29 PM   #17715
Tech Master
 
wingman2's Avatar
 
Join Date: Dec 2005
Location: Tewkesbury, UK via Plymouth, UK.
Posts: 1,259
Default

Thanks again! I have had a look at the 'other' forum, trying to get my translator to work but it is having major problems. Do you know of a website for the Ascari chassis? Looks good and would like to find out about prices, shipping, etc. Chris.
wingman2 is offline   Reply With Quote
Reply

Similar Threads
Thread Thread Starter Forum Replies Last Post
New to the forum mig rod Electric Off-Road 1 01-05-2008 05:23 PM
hi i need help and im new to the forum racer4 Rookie Zone 4 01-21-2007 02:37 PM
Why is this forum listed under the On Road Forum? sport10 Onroad Nitro Engine Zone 0 01-11-2007 08:06 AM
Forum Changes... futureal Wisconsin & Illinois Racing 3 10-28-2002 09:26 PM



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off



All times are GMT -7. It is currently 11:07 PM.


Powered By: vBulletin v3.9.2.1
Privacy Policy | Terms of Use | Advertise Content © 2001-2011 RCTech.net

SEO by vBSEO 3.5.0